Air Jacks
1/4" BSPP Pneufit Quick Connect Banjo for 8mm (5/16") hose. Fits 8 BAR / 120 PSI air jack systems or an 8mm (5/16") vacuum hose. Pneufit Banjo for 8 BAR (120 PSI) air jack setups. Thread 1/4 BSPP (G). Fits the 8mm pneumatic hose included with Air Jack 90 C hose kit. Used on Nuke Performance products: Air Jack 90 Competition Air Jack 90 Hose Kit If you wish to change or complement the use of fittings of the highest quality, we recommend that you use our fittings which are designed to withstand high power and excessive wear and in the right combination with the products they were intended for. Quantity : 1pc..
6.84€
Ex Tax:5.70€
Genuine Peli Storm Case / Hard case for storage and transport of Nuke Performance Air Jack 90 Competition Elephant Foot. Functional foam insert included. This high-quality and extremely durable hard case from Peli comes with a durable foam insert that suits storage and transport of up to four Nuke Performance Elephant Feet. Only suitable for Nuke Performance Air Jack 90 Competition air jacks. Highest possible quality hard case Laser-cut, high-quality foam inserts Fits four complete Elephant Feet assembly Extendable handle and two wheels for easy transport Extremely durable storm case from Peli Storm case from the well-known and trusted manufacturer Pelican that is market-leading in hard cases for any type of use. This hard case is adapted to use with up to four complete elephant foot units during transport and storage. A must-have accessory for your Nuke Performance Air Jack 90 C Elephant Foot. Nuke Performance Air Jack 90 C Elephant Foot Delivered without the elephant foot, but when purchased together they are delivered assembled within the hard case. For more information about the elephant feet for the low-pressure air jacks from Nuke Performance, view the available selection of Air Jack 90 Competition accessories. Air Jack 90 Competition Elephant Foot Part # : 590-02-101 Laser-cut high-density foam inserts for up to four complete units The case is delivered with high-quality, durable, high-density foam inserts for storage and transport of up to four complete elephant feet units. This ensures that the elephant feet don´t get damaged during transport and or storage but also gives you a functional and easy way to manage your vehicle's equipment both in the workshop, trailer, and in the pit lane during track days and races. Nuke Performance Air Jack 90 Competition air jacks, the low-pressure air jack solution for your motorsports vehicle The low-pressure air jacks from Nuke Performance let you get the benefits from in-vehicle air jacks without the need for external nitrous tubes and expensive accessories. The Nuke Performance 90 Competition air jacks work with common workshop air compressors and lift 402 kg (886 lb) each at as low as 8 BAR / 120 PSI. For more information about the Nuke Performance Air Jacks, view the assortment of available setups and kits. Air Jack 90 Competition, 8 BAR / 120 PSI Part # : 590-01-201 Air jack 90 C Complete Set 3pc, 8 Bar / 120 PSI Part # : 590-01-203 Air jack 90 C Complete Set 4pc, 8 Bar / 120 PSI Part # : 590-01-204 Air Jack 90 C Elephant Foot Peli Storm Case Specifications For more information about elephant foot specifications, view the product manual. Interior (LxWxD) 559x432x323mm (22.0x17.0x12.7") Exterior (LxWxD) 625x500x366mm (24.6x19.7x14.4") Weight empty 10352 g (22.52 lb) Weight full * 21500 g (47.39 lb) Hard case Peli iM2750 Storm Travel Case Buoyancy 78700 g (173.50 lb) Extendable handle YES Seal O-ring seal Padlock hole diameter 6 mm (0.23") Weight with four complete Elephant Foot units. Air Jack 90 C Elephant Foot Peli Storm Case includes: 1 x Peli Storm Case hard case with foam insert The case is sold without the elephant feet, if purchased together it will be delivered with assembled elephant feet within the case...
1,006.80€
Ex Tax:839.00€
Replacement aluminum foot for Nuke Performance Air Jack 90 Competition. Including 2pc O-ring. If the air jack foot is damaged, it can be replaced. If the piston thread is damaged, please contact Nuke Performance for consultation, it must be a valid seal between the piston and the foot. With the replacement foot, you get two included o-rings, one for the foot itself and one for the top lid that you have to remove to be able to release the internal spring. To unlock the foot from the piston, use a pin wrench.Pin wrench Part # : 200-20-101 Download Replacement Manual (.pdf) Used on Nuke Performance products: Air Jack 90 Competition If you wish to change or complement the use of fittings of the highest quality, we recommend that you use our fittings which are designed to withstand high power and excessive wear and in the right combination with the products they were intended for. Quantity : 1pc..
74.40€
Ex Tax:62.00€
Replacement aluminum lock nut for Nuke Performance Air Jack 90 Competition. If lost when mounting air jack or damaged when replacing air jack foot, here you have a spare aluminum lock nut. Download Product Manual (.pdf) Used on Nuke Performance products: Air Jack 90 Competition If you wish to change or complement the use of fittings of the highest quality, we recommend that you use our fittings which are designed to withstand high power and excessive wear and in the right combination with the products they were intended for. Quantity : 1pc..
42.00€
Ex Tax:35.00€
Replacement aluminum top lid for Nuke Performance Air Jack 90 Competition. Including 1pc O-ring. If lost when mounting air jack or damaged when replacing air jack foot, here you have a spare top lid with included o-ring. Used on Nuke Performance products: Air Jack 90 Competition If you wish to change or complement the use of fittings of the highest quality, we recommend that you use our fittings which are designed to withstand high power and excessive wear and in the right combination with the products they were intended for. Quantity : 1pc..
42.00€
Ex Tax:35.00€
Complete set of 2pc Nuke Performance 8 BAR / 120 PSI Air Jacks 90 Competition: Fast, lightweight, reliable, and easy to use air jack kits. A product born out of the request from motorsports for an easy to use, lightweight, and reliable air jack setup that can be activated by an air supply pressure of as low as 8 BAR / 120 PSI. Lifts your vehicle to new heights by the use of a common workshop compressor. Lightweight motorsports onboard air jacks 8 BAR / 120 PSI work pressure Works with common workshop air compressors Complete set with jacks, safety props and hose kit 2pc Set lifts 804 kg / 1772 lb at as low as 8 BAR / 120 PSI Optimize your tire changes for drag racing and drifting Total lift length of 251mm / 9.88" The Nuke Performance 8 BAR (120 PSI) Air Jack 90 Competition is fast, lightweight, reliable and extremely easy to use and can be activated by an air supply pressure of as low as 8 BAR (120 PSI). Prepare yourself for anything that may go wrong during the track day and with these air jacks you are ready for fast and effective repairs so you can quickly hit the drag strip again. Made of high strength aluminum for low weight and extra durability The body is made out of high strength, machined aluminum extrusion for the thinnest possible wall thickness to achieve the lowest possible weight without sacrificing functionality. It houses a high strength aluminum piston rod with an anodized finish for long lasting durability. The internal bearings are constructed of high strength, ultradurable, low friction polyoxymethylene - these air jacks are made tough to cope with the high demands from worldwide motorsports. Works with an 8 BAR (120 PSI) common workshop air compressor The Nuke Performance Air Jack 90C has an optimal operating pressure between 6-12 BAR (87 - 174 PSI), this means that it works with a regular workshop 8 BAR (120 PSI) air compressor so you do not need to bring a huge and expensive nitrogen tank. As most workshop air compressors are available in between 8 - 12 BAR (116 - 174 PSI) this is what these air jacks are specified to work with. At as low as 8 BAR (116 PSI), these air jacks will lift 402 KG (886 LB) each, and in a 2-jack system, it results in a full 804 KG (1772 LB). This omits the need for additional equipment such as a compressed air bottle, lance, or high-pressure system. Complete set of 2 jacks for all types of motorsports use To make it as easy as possible for quick maintenance and tire changes during motorsports such as drag racing and drifting where recurring tire changes and rear end setups are required, we have put together a complete set of 2 Air Jacks with suitable accessories. The Air Jack kit contains hoses, pneufit fittings, safety props, and air jacks to cover your every need. This kit includes 2pc air jacks, intended to lift only one axle for easy access under the vehicle or for an easy and quick tire change. Nuke Performance also offers complete sets of 3 and 4pc air jacks for other configurations. Air Jack 3pc Complete Set Part # : 590-01-203 Air Jack 4pc Complete Set Part # : 590-01-204 The set comes with jacks, safety props, 5m (16.4ft) hose and fittings The Nuke Performance 90C Air Jack kits are designed to be used together with 8 BAR (120 PSI) workshop air compressors and come complete with an easy-to-use quick valve with a common EURO / pneufit fitting that fits most common air compressors. The included bracket lets you mount it in an easy to reach place out of the risk of getting it contaminated by weather or dirt from the track. In the hose kit you get 5m (16.4ft) 8mm quick connect pneufit hose, 1x quick connect T-fittings, 2x quick connect 1/4" BSPP barb fittings for the Air Jack inlets and a petcock ball valve. This kit is ideal for most setups and is easy to install, durable and affordable. How much do the Nuke Performance Air Jacks lift in a 2pc setup? The Nuke Performance Air Jacks 90 Competition is made to use with an 8 BAR / 120 PSI air compressor, and thanks to its larger diameter and clever design it can lift 402kg (886 lb) at 8 BAR (116 PSI) and 603kg (1329 lb) at 12 BAR (174 PSI) each. Combined into a setup of 2 air jacks, it is suitable when you only want to lift one end for quick setup or tire change. Perfect for drifting and drag racing. Set of 2pc at 8 BAR (116 PSI) 804KG (1772 LB) in total Set of 2pc at 12 BAR (174 PSI) 1206KG (2658 LB) in total Air Jack 90C Safety Props reduce the possibility of accidents The Nuke Performance 90 Competition Air Jack sets comes with safety props included. When working on or beneath your vehicle, there is always a possibility of accidents. When your vehicle is lifted with the help of air jacks you must always use these air jack locks or traditional jacks to prevent an accident if the pressure drops due to leakage, malfunction or handling error. The Nuke Performance 90C Safety Props simply clip securely into place when the air jack is fully extended, are equipped with an easy to use handle and come in a practical carry bag. Safety Prop Part # : 590-01-202 How do I mount Air Jacks to my vehicle? We got you covered... Made of steel and intended to be welded to the body or chassis of your build. Delivered untreated and easy to adjust to your required dimensions. If you go with the plate or bracket, we advocate the use of a lower and a higher attachment point to make the installation sufficiently durable and safe. All brackets materials and design are calculated according to what is needed, make it easy by using the Nuke Performance mounting accessories. Steel Plate Part # : 590-10-109 Steel Bracket Part # : 590-10-108 Steel Tube Part # : 590-10-110 Developed in Sweden, guaranteeing the highest possible quality The 90 Competition Air Jacks and Safety Props are developed, designed and manufactured by Nuke Performance for the highest possible quality and with the same hallmark as all the other parts in the lightweight motorsports range. There is no substitute for the quality of Nuke Performance! Air Jack Specifications Lift capacity 8 BAR (116 PSI) 402 KG (886 LB) / each Lift capacity 12 BAR (174 PSI) 603 KG (1329 LB) / each Outer diameter 89.5mm (3.52") Length retracted 349mm (13.74") Total lift height 251mm (9.88") Max operating pressure 12 BAR (174 PSI) Min / Max Ø mounting Hole 90mm (3.54") / 95mm (3.74") Air Jack thread connection 1/4 BSPP (G) Air Jack 90 C Complete Set 2pc includes: 2 x Air Jack 90 C Air Jacks 2 x Air Jack 90 C Safety Prop 1 x Safety Prop Carry bag 1 x Quick Connect 8mm Pneufit T-fittings 2 x 1/4" Barb-fitting to Quick Connect 8mm 1 x Petcock ball valve with EURO pneufit fitting 5m (16.4ft) 8mm Quick Connect pneufit hose 10 x Cable ties Technical information : • Air Jack body is high strength, machined aluminum extrusion for thinnest possible wall thickness. • CNC manufactured high strength aluminum piston rod with anodized finish for long lasting durability. • High strength, ultradurable, low friction polyoxymethylene bearings. • Incorporates an internal high strength tension spring for maximum efficiency. • Lightweight, easy to replace, hard-anodized aluminum foot. • Lightweight design for motorsports use. • 4pc aluminum mounting nuts included with every jack. • 1/4 BSPP (G) thread for pneufit fitting. • Anodized finish for long lasting function and corrosion-free appearance. • Designed, developed and manufactured in Sweden. • Laser engraved and proudly branded with the Swedish flag. Lift capacity : / each 8 BAR (116 PSI) : 402 KG (886 LB) 12 BAR (174 PSI) : 603 KG (1329 LB) Max operating pressure : 12 BAR (174 PSI) Air Jack Measurements : Height retracted : 349 mm (13.74") Diameter : 89.5 mm (3.52") Mounting nut diameter : 104 mm (4.09") Min Ø mounting hole : 90 mm (3.54") Max Ø mounting hole : 95 mm (3.74") Total lift height : 251 mm (9.88") Weight : 2325 g (4.927 LB) Safety Prop Measurements : Length : 258 mm (10.15”) Grip length : 150 mm (5.90”) Diameter : 69 mm (2.71”) Depth : 95 mm (3.74”) Weight : 530 g (1.16 LB)..
1,299.60€
Ex Tax:1,083.00€
Complete set of 3pc Nuke Performance 8 BAR / 120 PSI Air Jacks 90 Competition: Fast, lightweight, reliable, and easy to use air jack kits. A product born out of the request from motorsports for an easy to use, lightweight, and reliable air jack setup that can be activated by an air supply pressure of as low as 8 BAR / 120 PSI. Lifts your vehicle to new heights by the use of a common workshop compressor. Lightweight motorsports onboard air jacks 8 BAR / 120 PSI work pressure Works with common workshop air compressors Complete set with jacks, safety props and hose kit 3pc Set lifts 1206 kg / 2658 lb at as low as 8 BAR / 120 PSI Body and piston of high strength aluminum Total lift length of 251mm / 9.88" The Nuke Performance 8 BAR (120 PSI) Air Jack 90 Competition is fast, lightweight, reliable and extremely easy to use and can be activated by an air supply pressure of as low as 8 BAR (120 PSI). Prepare yourself for anything that may go wrong during the track day and with these air jacks you are ready for fast and effective repairs so you can quickly hit the race track again. Made of high strength aluminum for low weight and extra durability The body is made out of high strength, machined aluminum extrusion for the thinnest possible wall thickness to achieve the lowest possible weight without sacrificing functionality. It houses a high strength aluminum piston rod with an anodized finish for long lasting durability. The internal bearings are constructed of high strength, ultradurable, low friction polyoxymethylene - these air jacks are made tough to cope with the high demands from worldwide motorsports. Works with an 8 BAR (120 PSI) common workshop air compressor The Nuke Performance Air Jack 90C has an optimal operating pressure between 6-12 BAR (87 - 174 PSI), this means that it works with a regular workshop 8 BAR (120 PSI) air compressor so you do not need to bring a huge and expensive nitrogen tank. As most workshop air compressors are available in between 8 - 12 BAR (116 - 174 PSI) this is what these air jacks are specified to work with. At as low as 8 BAR (116 PSI), these air jacks will lift 402 KG (886 LB) each, and in a 3-jack system, it results in a full 1206 KG (2658 LB). This omits the need for additional equipment such as a compressed air bottle, lance, or high-pressure system. Complete set of 3 jacks for all types of motorsports use To make it as easy as possible for motorsports such as GT racing, sports cars, time attack, etc where the vehicles are often very light and can use only 3 air jacks, we have put together a complete set of 3 Air Jacks with suitable accessories. The Air Jack kit contains hoses, pneufit fittings, safety props, and air jacks to cover your every need. This kit includes 3pc air jacks, but the kit with 4pc is the most common setup and is more often used, check the specifications to see which set that fits your needs. One Air Jack is suggested to be placed next to each wheel at the end of the vehicle with the highest weight and one in between the other wheels. This kit is particularly suitable for vehicles that have staggered weight distribution, like vehicles with the engine located behind the rear axle. Nuke Performance also offers complete sets of 2 and 4pc air jacks for other configurations. Air Jack 2pc Complete Set Part # : 590-01-205 Air Jack 4pc Complete Set Part # : 590-01-204 The set comes with jacks, safety props, 10m (32.8ft) hose and fittings The Nuke Performance 90C Air Jack kits are designed to be used together with 8 BAR (120 PSI) workshop air compressors and come complete with an easy-to-use quick valve with a common EURO / pneufit fitting that fits most common air compressors. The included bracket lets you mount it in an easy to reach place out of the risk of getting it contaminated by weather or dirt from the track. In the hose kit you get 10m (32.8ft) 8mm quick connect pneufit hose, 2x quick connect T-fittings, 3x quick connect 1/4" BSPP barb fittings for the Air Jack inlets and a petcock ball valve. This kit is ideal for most setups and is easy to install, durable and affordable. How much do the Nuke Performance Air Jacks lift in a 3pc setup? The Nuke Performance Air Jacks 90 Competition is made to use with an 8 BAR / 120 PSI air compressor, and thanks to its larger diameter and clever design it can lift 402kg (886 lb) at 8 BAR (116 PSI) and 603kg (1329 lb) at 12 BAR (174 PSI) each. Combined into a setup of 3 air jacks, it is suitable for very light vehicles. Set of 3pc at 8 BAR (116 PSI) 1206KG (2658 LB) in total Set of 3pc at 12 BAR (174 PSI) 1809KG (3988 LB) in total The Nuke Performance 90 Competition Air Jack sets comes with safety props included. When working on or beneath your vehicle, there is always a possibility of accidents. When your vehicle is lifted with the help of air jacks you must always use these air jack locks or traditional jacks to prevent an accident if the pressure drops due to leakage, malfunction or handling error. The Nuke Performance 90C Safety Props simply clip securely into place when the air jack is fully extended, are equipped with an easy to use handle and come in a practical carry bag. Safety Prop Part # : 590-01-202 How do I mount Air Jacks to my vehicle? We got you covered! Made of steel and intended to be welded to the body or chassis of your build. Delivered untreated and easy to adjust to your required dimensions. If you go with the plate or bracket, we advocate the use of a lower and a higher attachment point to make the installation sufficiently durable and safe. All brackets materials and design are calculated according to what is needed, make it easy by using the Nuke Performance mounting accessories. Steel Plate Part # : 590-10-109 Steel Bracket Part # : 590-10-108 Steel Tube Part # : 590-10-110 Developed in Sweden, guaranteeing the highest possible quality The 90 Competition Air Jacks and Safety Props are developed, designed and manufactured by Nuke Performance for the highest possible quality and with the same hallmark as all the other parts in the lightweight motorsports range. There is no substitute for the quality of Nuke Performance! Air Jack Specifications Lift capacity 8 BAR (116 PSI) 402 KG (886 LB) / each Lift capacity 12 BAR (174 PSI) 603 KG (1329 LB) / each Outer diameter 89.5mm (3.52") Length retracted 349mm (13.74") Total lift height 251mm (9.88") Max operating pressure 12 BAR (174 PSI) Min / Max Ø mounting Hole 90mm (3.54") / 95mm (3.74") Air Jack thread connection 1/4 BSPP (G) Air Jack 90 C Complete Set 3pc includes: 3 x Air Jack 90 C Air Jacks 3 x Air Jack 90 C Safety Prop 1 x Safety Prop Carry bag 3 x Quick Connect 8mm Pneufit T-fittings 3 x 1/4" Barb-fitting to Quick Connect 8mm 1 x Petcock ball valve with EURO pneufit fitting 10m (32.8ft) 8mm Quick Connect pneufit hose 10 x Cable ties Technical information : • Air Jack body is high strength, machined aluminum extrusion for thinnest possible wall thickness. • CNC manufactured high strength aluminum piston rod with anodized finish for long lasting durability. • High strength, ultradurable, low friction polyoxymethylene bearings. • Incorporates an internal high strength tension spring for maximum efficiency. • Lightweight, easy to replace, hard-anodized aluminum foot. • Lightweight design for motorsports use. • 4pc aluminum mounting nuts included with every jack. • 1/4 BSPP (G) thread for pneufit fitting. • Anodized finish for long lasting function and corrosion-free appearance. • Designed, developed and manufactured in Sweden. • Laser engraved and proudly branded with the Swedish flag. Lift capacity : / each 8 BAR (116 PSI) : 402 KG (886 LB) 12 BAR (174 PSI) : 603 KG (1329 LB) Max operating pressure : 12 BAR (174 PSI) Air Jack Measurements : Height retracted : 349 mm (13.74") Diameter : 89.5 mm (3.52") Mounting nut diameter : 104 mm (4.09") Min Ø mounting hole : 90 mm (3.54") Max Ø mounting hole : 95 mm (3.74") Total lift height : 251 mm (9.88") Weight : 2325 g (4.927 LB) Safety Prop Measurements : Length : 258 mm (10.15”) Grip length : 150 mm (5.90”) Diameter : 69 mm (2.71”) Depth : 95 mm (3.74”) Weight : 530 g (1.16 LB)..
1,920.00€
Ex Tax:1,600.00€
Complete set of 4pc Nuke Performance 8 BAR / 120 PSI Air Jacks 90 Competition: Fast, lightweight, reliable, and easy to use air jack kits. A product born out of the request from motorsports for an easy to use, lightweight, and reliable air jack setup that can be activated by an air supply pressure of as low as 8 BAR / 120 PSI. Lifts your vehicle to new heights by the use of a common workshop compressor. Lightweight motorsports onboard air jacks 8 BAR / 120 PSI work pressure Works with common workshop air compressors Complete set with jacks, safety props and hose kit Set lifts 1608 kg / 3544 lb at as low as 8 BAR / 120 PSI Body and piston of high strength aluminum Total lift length of 251mm / 9.88" The Nuke Performance 8 BAR (120 PSI) Air Jack 90 Competition is fast, lightweight, reliable and extremely easy to use and can be activated by an air supply pressure of as low as 8 BAR (120 PSI). Prepare yourself for anything that may go wrong during the track day and with these air jacks you are ready for fast and effective repairs so you can quickly hit the race track again. Made of high strength aluminum for low weight and extra durability The body is made out of high strength, machined aluminum extrusion for the thinnest possible wall thickness to achieve the lowest possible weight without sacrificing functionality. It houses a high strength aluminum piston rod with an anodized finish for long lasting durability. The internal bearings are constructed of high strength, ultradurable, low friction polyoxymethylene - these air jacks are made tough to cope with the high demands from worldwide motorsports. Works with an 8 BAR (120 PSI) common workshop air compressor The Nuke Performance Air Jack 90C has an optimal operating pressure between 6-12 BAR (87 - 174 PSI), this means that it works with a regular workshop 8 BAR (120 PSI) air compressor so you do not need to bring a huge and expensive nitrogen tank. As most workshop air compressors are available in between 8 - 12 BAR (116 - 174 PSI) this is what these air jacks are specified to work with. At as low as 8 BAR (116 PSI), these air jacks will lift 402 KG (886 LB) each, and in a 4-jack system, it results in a full 1608 KG (3545 LB). This omits the need for additional equipment such as a compressed air bottle, lance, or high-pressure system. Complete set of 4 jacks for all types of motorsports use To make it as easy as possible for all types of motorsports such as drag racing, drifting, touring cars, sports cars, GT racing, time attack and more we have put together a complete set of 4 Air Jacks with suitable accessories. The Air Jack kit contains hoses, pneufit fittings, safety props, and air jacks to cover your every need. This kit includes 4pc air jacks and is the most common setup. One Air Jack is suggested to be placed next to each wheel and works perfectly on vehicles with an even weight distribution over the front and rear axle. Nuke Performance also offers complete sets of 2 and 3pc air jacks for other configurations. Air Jack 2pc Complete Set Part # : 590-01-205 Air Jack 3pc Complete Set Part # : 590-01-203 The set comes with jacks, safety props, 10m (32.8ft) hose and fittings The Nuke Performance 90C Air Jack kits are designed to be used together with 8 BAR (120 PSI) workshop air compressors and come complete with an easy-to-use quick valve with a common EURO / pneufit fitting that fits most common air compressors. The included bracket lets you mount it in an easy to reach place out of the risk of getting it contaminated by weather or dirt from the track. In the hose kit you get 10m (32.8ft) 8mm quick connect pneufit hose, 3x quick connect T-fittings, 4x quick connect 1/4" BSPP barb fittings for the Air Jack inlets and a petcock ball valve. This kit is ideal for most setups and is easy to install, durable and affordable. How much do the Nuke Performance Air Jacks lift in a 4pc setup? The Nuke Performance Air Jacks 90 Competition is made to use with an 8 BAR / 120 PSI air compressor, and thanks to its larger diameter and clever design it can lift 402kg (886 lb) at 8 BAR (116 PSI) and 603kg (1329 lb) at 12 BAR (174 PSI) each. Combined into a setup of 4 air jacks, it exceeds normal needs in motorsports. Set of 4pc at 8 BAR (116 PSI) 1608KG (3545 LB) in total Set of 4pc at 12 BAR (174 PSI) 2412KG (5317 LB) in total Air Jack 90C Safety Props reduce the possibility of accidents The Nuke Performance 90 Competition Air Jack sets comes with safety props included. When working on or beneath your vehicle, there is always a possibility of accidents. When your vehicle is lifted with the help of air jacks you must always use these air jack locks or traditional jacks to prevent an accident if the pressure drops due to leakage, malfunction or handling error. The Nuke Performance 90C Safety Props simply clip securely into place when the air jack is fully extended, are equipped with an easy to use handle and come in a practical carry bag. Safety Prop Part # : 590-01-202 How do I mount Air Jacks to my vehicle? We got you covered... Made of steel and intended to be welded to the body or chassis of your build. Delivered untreated and easy to adjust to your required dimensions. If you go with the plate or bracket, we advocate the use of a lower and a higher attachment point to make the installation sufficiently durable and safe. All brackets materials and design are calculated according to what is needed, make it easy by using the Nuke Performance mounting accessories. Steel Plate Part # : 590-10-109 Steel Bracket Part # : 590-10-108 Steel Tube Part # : 590-10-110 Developed in Sweden, guaranteeing the highest possible quality The 90 Competition Air Jacks and Safety Props are developed, designed and manufactured by Nuke Performance for the highest possible quality and with the same hallmark as all the other parts in the lightweight motorsports range. There is no substitute for the quality of Nuke Performance! Air Jack Specifications For more information about specifications, view the product manual. Lift capacity 8 BAR (116 PSI) 402 KG (886 LB) / each Lift capacity 12 BAR (174 PSI) 603 KG (1329 LB) / each Outer diameter 89.5mm (3.52") Length retracted 349mm (13.74") Total lift height 251mm (9.88") Max operating pressure 12 BAR (174 PSI) Min / Max Ø mounting Hole 90mm (3.54") / 95mm (3.74") Air Jack thread connection 1/4 BSPP (G) Air Jack 90 C Complete Set 4pc includes: 4 x Air Jack 90 C Air Jacks 4 x Air Jack 90 C Safety Prop 1 x Safety Prop Carry bag 3 x Quick Connect 8mm Pneufit T-fittings 4 x 1/4" Barb-fitting to Quick Connect 8mm 1 x Petcock ball valve with EURO pneufit fitting 10m (32.8ft) 8mm Quick Connect pneufit hose 10 x Cable ties Technical information : • Air Jack body is high strength, machined aluminum extrusion for thinnest possible wall thickness. • CNC manufactured high strength aluminum piston rod with anodized finish for long lasting durability. • High strength, ultradurable, low friction polyoxymethylene bearings. • Incorporates an internal high strength tension spring for maximum efficiency. • Lightweight, easy to replace, hard-anodized aluminum foot. • Lightweight design for motorsports use. • 4pc aluminum mounting nuts included with every jack. • 1/4 BSPP (G) thread for pneufit fitting. • Anodized finish for long lasting function and corrosion-free appearance. • Designed, developed and manufactured in Sweden. • Laser engraved and proudly branded with the Swedish flag. Lift capacity : / each 8 BAR (116 PSI) : 402 KG (886 LB) 12 BAR (174 PSI) : 603 KG (1329 LB) Max operating pressure : 12 BAR (174 PSI) Air Jack Measurements : Height retracted : 349 mm (13.74") Diameter : 89.5 mm (3.52") Mounting nut diameter : 104 mm (4.09") Min Ø mounting hole : 90 mm (3.54") Max Ø mounting hole : 95 mm (3.74") Total lift height : 251 mm (9.88") Weight : 2325 g (4.927 LB) Safety Prop Measurements : Length : 258 mm (10.15”) Grip length : 150 mm (5.90”) Diameter : 69 mm (2.71”) Depth : 95 mm (3.74”) Weight : 530 g (1.16 LB)..
2,541.60€
Ex Tax:2,118.00€
Nuke Performance Air Jack 90 Competition Elephant Foot, second stage lift capacity for easy maintenance during track days. The Nuke Performance elephant feet give you a total lift capacity of 480mm (18.9"), for easy access and safe maintenance of your vehicle. Rigid design for long durability and safe usage on all types of motorsport vehicles. Suits Air Jack 90 Competition low-pressure air jacks Second stage lift option for track days and workshops Total lift height of 480mm (18.9") Easier access to the underside of the vehicle Self-locking design when pressure is released These elephant feet are designed to work with Nuke Performance Air Jack 90 C low-pressure air jacks. Give you the ability to lift your air jacks in a second stage to ensure a higher lift. With the elephant feet, you can release the pressure line and still be able to work under the car in safety. Used by racing teams in various series worldwide. Self-locks when pressure is released for safe and easy access to the underside of your vehicle When the elephant foot is attached in its second stage and the pressure is released, the elephant foot is locked together into one unit. This makes it possible to work with your vehicle even without pressurized lines and also gives you the ability to let the elephant feet hang beneath the vehicle when using wheel alignment tables etc. The air jacks are self-centered within the elephant safety props. Peli flight case for easy transport and storage For easy transport and storage, we provide a genuine Peli flight case / hard case. The case has foam inserts which give you the perfect fitment of a set of 4 complete elephant feet. The case is also equipped with a retractable handle and two wheels which makes it really easy to handle within the pitlane or workshop. A must-have accessory for your elephant foot setup. The hard case only suits Nuke Performance Air Jack 90C air jacks. Elephant Feet Peli Hard Case Part # : 590-02-101 Sold as separate units, used in 3 or 4 Air Jack setups The Elephant Foot is delivered as separate units and is able to be used when using a 3pcs or 4pcs Air Jack setup. Not suitable for 2pcs Air Jack installations. Select the needed amount of Elephant Feet when placing an order. Developed in Sweden, guaranteeing the highest possible quality The Air Jack 90 Competition Elephant Foot and Air Jack 90 Competition are developed, designed and manufactured by Nuke Performance for the highest possible quality and with the same hallmark as all the other parts in the lightweight motorsports range. There is no substitute for the quality of Nuke Performance! Elephant Foot Specifications Lift height added +229 mm (+9.06") Total lift height 480 mm (18.89") Total height 494 mm (19.45") Width 207 mm (8.15") Weight 2787 g (6.14 lb) Compatibility Air Jack 90 Competition 590-01-201 For motorsports use YES, for motorsports use only Quantity 1 pcs * * Only for use with 3pcs and 4pcs air jack kits, you need the same amount of elephant feet as air jacks. Air Jack 90 Competition Elephant Foot includes: 1 x Elephant foot bottom part 1 x Elephant foot safety prop 1 x Product manual SPECIFICATIONS Elephant Foot Specifications For more information about specifications, view the product manual. Lift height added +229 mm (+9.06") Total lift height 480 mm (18.89") Total height 494 mm (19.45") Width 207 mm (8.15") Weight 2787 g (6.14 lb) Compatibility Air Jack 90 Competition For motorsports use YES, for motorsports use only Quantity 1 pcs * * Only for use with 3pcs and 4pcs air jack kits, you need the same amount of elephant feet as air jacks. Air Jack 90 Competition Elephant Foot includes: 1 x Elephant foot bottom part 1 x Elephant foot safety prop 1 x Product manual..
518.40€
Ex Tax:432.00€
Nuke Performance Safety Prop for the Air Jack 90 Competition: Secures the Air Jack pistons when lifted. When using the Nuke Performance 90C Air Jacks, we advocate the utmost care and always use our sturdy and safe safety props to prevent an accident if the pressure disappears due to leakage, malfunction, or handling error. Securely clips onto the onboard air jack pistons Prevents accidents when working under a raised vehicle Practical handle for easy and safe operation Anodized for long and lasting durability Delivered in a practical and durable carry bag The Nuke Performance 90C Safety Prop simply clips securely into place when the air jack is fully extended and is equipped with an easy to use handle. If you order 2, 3 or 4 props, they will come in a practical and durable carry bag. Locks the Air Jack in a safe and extended position The Nuke Performance Air Jack 90 Competition Safety Props are designed to be used with the 90C series of Nuke Performance 8 BAR (120 PSI) Air Jacks. When the piston is fully extended it clips easily and securely to the piston and reduces the risk of injuries in case pressure disappears due to leakage, malfunction or handling error. Manufactured by high strength aluminum extrusion to maintain the highest functionality, finish and quality to cope with the great forces they are exposed to when the entire weight of the vehicle rests on it as designed. Durable and easy-to-handle bag for storage When ordering 2 or more safety props, we deliver them in a durable and practical carry bag with a sturdy handle that makes it easy to store them among other equipment both when you are on the track and in the workshop. Made in Sweden, guaranteeing the highest possible quality The 90 Competition Air Jacks and Safety Props are developed, designed and manufactured by Nuke Performance for the highest possible quality and with the same hallmark as all the other parts in the lightweight motorsports range. There is no substitute for the quality of Nuke Performance! Technical information : • Body made of high strength, CNC machined aluminum extrusion. • Lightweight design for motorsports use. • Anodized finish for long lasting function and corrosion-free appearance. Measurements : Length : 258 mm (10.15”) Grip length : 150 mm (5.90”) Diameter : 69 mm (2.71”) Depth : 95 mm (3.74”) Weight : 530 g (1.16 LB)..
124.80€
Ex Tax:104.00€
Nuke Performance 8 BAR / 120 PSI Air Jacks 90 Competition: Fast, lightweight, reliable, and easy to use air jacks. A product born out of the request from motorsports for an easy to use, lightweight, and reliable air jack setup that can be activated by an air supply pressure of as low as 8 BAR / 120 PSI. Lifts your vehicle to new heights by the use of a common workshop compressor. Lightweight motorsports onboard air jacks. 8 BAR / 120 PSI work pressure Works with common workshop air compressors Each lifts 402 kg / 886 lb at as low as 8 BAR / 120 PSI Body and piston of high strength aluminum Total lift length of 251mm / 9.88" 1/4 BSPP thread inlet The Nuke Performance 8 BAR (120 PSI) Air Jack 90 Competition is fast, lightweight, reliable and extremely easy to use and can be activated by an air supply pressure of as low as 8 BAR (120 PSI). Prepare yourself for anything that may go wrong during the track day and with these air jacks you are ready for fast and effective repairs so you can quickly hit the race track again. Made of high strength aluminum for low weight and extra durability The body is made out of high strength, machined aluminum extrusion for the thinnest possible wall thickness to achieve the lowest possible weight without sacrificing functionality. It houses a high strength aluminum piston rod with an anodized finish for long lasting durability. The internal bearings are constructed of high strength, ultradurable, low friction polyoxymethylene - these air jacks are made tough to cope with the high demands from worldwide motorsports. Works with an 8 BAR (120 PSI) common workshop air compressor The Nuke Performance Air Jack 90C has an optimal operating pressure between 6-12 BAR (87 - 174 PSI), this means that it works with a regular workshop 8 BAR (120 PSI) air compressor so you do not need to bring a huge and expensive nitrogen tank. As most workshop air compressors are available in between 8 - 12 BAR (116 - 174 PSI) this is what these air jacks are specified to work with. At as low as 8 BAR (116 PSI), these air jacks will lift 402 KG (886 LB) each, and in a 4-jack system, it results in a full 1608 KG (3545 LB). This omits the need for additional equipment such as a compressed air bottle, lance, or high-pressure system. Air Jack 90C Safety Props reduce the possibility of accidents When working on or beneath your vehicle, there is always a possibility of accidents. When your vehicle is lifted with the help of air jacks you must always use these air jack locks or traditional jacks to prevent an accident if the pressure drops due to leakage, malfunction or handling error. The Nuke Performance 90C Safety Props simply clip securely into place when the air jack is fully extended, are equipped with an easy to use handle and come in a practical carry bag. Safety Prop Part # : 590-01-202 Complete sets of 2 / 3 / 4 jacks for all types of motorsports use To make it as easy as possible, for all types of motorsports such as drag racing, drifting, touring cars, sports cars, GT racing, time attack and more we have put together complete kits for 2, 3, or 4 jacks. The Air Jack Kits contains hoses, pneufit fittings, safety props, and air jacks to cover your every need. Air Jack 2pc Complete Set Part # : 590-01-205 Air Jack 3pc Complete Set Part # : 590-01-203 Air Jack 4pc Complete Set Part # : 590-01-204 The Nuke Performance Air Jack 90C has an optimal operating pressure between 6-12 BAR (87 - 174 PSI), this means that it works with a regular workshop 8 BAR (120 PSI) air compressor so you do not need to bring a huge and expensive nitrogen tank. As most workshop air compressors are available in between 8 - 12 BAR (116 - 174 PSI) this is what these air jacks are specified to work with. At as low as 8 BAR (116 PSI), these air jacks will lift 402 KG (886 LB) each, and in a 4-jack system, it results in a full 1608 KG (3545 LB). This omits the need for additional equipment such as a compressed air bottle, lance, or high-pressure system. Developed in Sweden, guaranteeing the highest possible quality The 90 Competition Air Jacks are developed, designed and manufactured by Nuke Performance for the highest possible quality and with the same hallmark as all the other parts in the lightweight motorsports range. There is no substitute for the quality of Nuke Performance! How much do the Nuke Performance Air Jacks lift? The Nuke Performance Air Jacks 90 Competition is made to use with an 8 BAR / 120 PSI air compressor, and thanks to its larger diameter and clever design it can lift 402kg (886 lb) at 8 BAR (116 PSI) and 603kg (1329 lb) at 12 BAR (174 PSI). Combining into setups of 3 or 4 air jacks, which exceeds normal needs in motorsports. 8 BAR (116 PSI) Air Jack setup : Recommended operating pressure for a regular workshop air compressor. 1 pc air jack 402KG (886 LB) at 8 BAR (116 PSI) 2 pc setup 804KG (1772 LB) at 8 BAR (116 PSI) 3 pc setup 1206KG (2659 LB) at 8 BAR (116 PSI) 4 pc setup 1608KG (3545 LB) at 8 BAR (116 PSI) 12 BAR (174 PSI) Air Jack setup : 1 pc air jack 603KG (1329 LB) at 12 BAR (174 PSI) 2 pc setup 1206KG (2659 LB) at 12 BAR (174 PSI) 3 pc setup 1809KG (3988 LB) at 12 BAR (174 PSI) 4 pc setup 412KG (5317 LB) at 12 BAR (174 PSI) How do I mount Air Jacks to my vehicle? We got you covered... Made of steel and intended to be welded to the body or chassis of your build. Delivered untreated and easy to adjust to your required dimensions. If you go with the plate or bracket, we advocate the use of a lower and a higher attachment point to make the installation sufficiently durable and safe. All brackets materials and design are calculated according to what is needed, make it easy by using the Nuke Performance mounting accessories. Steel Plate Part # : 590-10-109 Steel Bracket Part # : 590-10-108 Steel Tube Part # : 590-10-110 Air Jack Specifications For more information about specifications, view the product manual. Lift capacity 8 BAR (116 PSI) 402 KG (886 LB) Lift capacity 12 BAR (174 PSI) 603 KG (1329 LB) Outer diameter 89.5mm (3.52") Length retracted 349mm (13.74") Total lift height 251mm (9.88") Max operating pressure 12 BAR (174 PSI) Min / Max Ø mounting Hole 90mm (3.54") / 95mm (3.74") Air Jack thread connection 1/4 BSPP (G) Technical information : • Body made of high strength, machined aluminum extrusion for thinnest possible wall thickness. • CNC manufactured high strength aluminum piston rod with anodized finish for long lasting durability. • High strength, ultradurable, low friction polyoxymethylene bearings. • Incorporates an internal high strength tension spring for maximum efficiency. • Lightweight, easy to replace, hard-anodized aluminum foot. • Lightweight design for motorsports use. • 4pc aluminum mounting nuts included with every jack. • 1/4 BSPP (G) thread for pneufit fitting. • Anodized finish for long lasting function and corrosion-free appearance. • Laser engraved and proudly branded with the Swedish flag. Lift capacity : 8 BAR (116 PSI) : 402 KG (886 LB) 12 BAR (174 PSI) : 603 KG (1329 LB) Max operating pressure : 12 BAR (174 PSI) Measurements : Height retracted : 349 mm (13.74") Diameter : 89.5 mm (3.52") Mounting nut diameter : 104 mm (4.09") Min Ø mounting hole : 90 mm (3.54") Max Ø mounting hole : 95 mm (3.74") Total lift height : 251 mm (9.88") Weight : 2325 g..
490.80€
Ex Tax:409.00€
Nuke Performance 8 BAR / 120 PSI Hose Kit for the Air Jack 90 Competition: A quick and simple solution to all your needs. Installing the Nuke Performance 90C Air Jacks should be easy, and with this hose kit for 8 BAR (120 PSI) air compressors you get everything you need for a 2, 3 or 4pc air jack setup. Gives you maximal functionality with minimal effort. For 8 BAR / 120 PSI workshop air compressors Includes 10m / 32.8ft 8mm quick connect hose Fits 2 / 3 / 4pc 90C Air Jack setups for motorsports Quick and easy plumbing with 8mm quick connect fittings With the simple but complete hose kit from Nuke Performance, adapted for the 90C series Air Jacks, it is extremely easy to install and connect your air jacks regardless of whether you are looking for a 2, 3 or 4pc jack setup. Fits directly to your 8 BAR / 120 PSI workshop air compressor The Nuke Performance 90C Air Jack Hose Kit comes ready with an easy-to-use quick valve with a common EURO fitting that fits worldwide workshop air compressors. The included bracket lets you mount it in an easy to reach place out of the risk of getting it contaminated by weather or dirt from the track. The 90C series of Air Jacks are specially developed for 8 BAR / 120 PSI compressors and this quick connect, 8mm pneufit kit includes everything you need to mount your Air Jacks in a quick, easy to maintain and reliable installation. All fittings needed are included within the Air Jack hose kit Within the hose kit you get 10m (32.8ft) 8mm quick connect pneufit hose, 3x quick connect T-fittings, 4x quick connect 1/4" BSPP barb fittings for the Air Jack inlets and a petcock ball valve. This kit is ideal for a low pressure 8 BAR / 120 PSI setup and is extremely lightweight, easy to install, durable and affordable. When you buy one of the Air Jack kits this hose kit is included. Air Jack Hose kit includes: 3 x Quick Connect 8mm Pneufit T-fittings 4 x Quick Connect 8mm to 1/4" Barb-fittings 1 x Petcock ball valve with EURO-fitting 10m (32.8ft) 8mm Quick Connect pneufit hose 10 x Cable ties..
54.00€
Ex Tax:45.00€
Petcock Ball Valve with EURO fitting for 8mm hose, valve made for the 90C Air Jacks. Fits 8 BAR / 120 PSI systems. Petcock ball valve for 8 BAR (120 PSI) air jack setups. Easy to mount with the included bracket and fits most common workshop air compressors with EURO fitting. Made for 8mm pneumatic hose with quick-connect fitting. Used on Nuke Performance products: Air Jack 90 Competition Air Jack 90 Hose Kit If you wish to change or complement the use of fittings of the highest quality, we recommend that you use our fittings which are designed to withstand high power and excessive wear and in the right combination with the products they were intended for. Quantity : 1pc..
25.92€
Ex Tax:21.60€
Hock pin wrench for the lock nut for Nuke Performance Air Jack 90 C. Hock pin wrench to attach the lock nuts for the Nuke Performance Air Jack 90 Competition. Used on Nuke Performance products: Air Jack 90 Competition Quantity : 1pc..
63.60€
Ex Tax:53.00€
Mounting accessories for mounting the Nuke Performance Air Jack 90 Competition. Enables easy installation thanks to correct dimensions. Made of steel and intended to be welded to the body or chassis. Delivered untreated and ready to be applied. Adapt external dimensions to your needs and purposes. You can place one on top, one on the bottom, in combination with the plate and pipe or both. The possibilities are as many as there are builds and builders. Dimensions: 180x116x53mm (7.08x4.56x2.09") Thickness : 3mm (0.12") Hole Ø : 91mm (3.58") Material : Steel An assortment of mounting accessories To make the installation of Air Jack 90C as simple as possible, Nuke Performance has developed a range of mounting accessories. A plate, bracket and pipe are available, all in weldable steel and adapted for direct fitment of the Air Jack 90 C to your vehicle. All parts are easy to adapt to your intended dimension needs. Steel Plate Part # : 590-10-109 Steel Bracket Part # : 590-10-108 Steel Tube / Pipe Part # : 590-10-110 Quantity : 1pc..
34.08€
Ex Tax:28.40€
Mounting accessories for mounting the Nuke Performance Air Jack 90 Competition. Enables easy installation thanks to correct dimensions. Made of steel and intended to be welded to the body or chassis. Delivered untreated and ready to be applied. Adapt external dimensions to your needs and purposes. Dimensions: 170x170mm (6.69x6.69")Thickness : 3mm (0.12")Hole Ø : 91mm (3.58")Material : SteelWeight : 540g (1.19lb) An assortment of mounting accessoriesTo make the installation of Air Jack 90C as simple as possible, Nuke Performance has developed a range of mounting accessories. A plate, bracket and pipe are available, all in weldable steel and adapted for direct fitment of the Air Jack 90 C to your vehicle. All parts are easy to adapt to your intended dimension needs.Steel Plate Part # : 590-10-109Steel Bracket Part # : 590-10-108Steel Tube / Pipe Part # : 590-10-110 Quantity : 1pc..
20.16€
Ex Tax:16.80€
Mounting accessories for mounting the Nuke Performance Air Jack 90 Competition. Enables easy installation thanks to correct dimensions. Made of steel and intended to be welded to the body or chassis. Delivered untreated and ready to be applied. Adapt external dimensions to your needs and purposes. You can use it as a solid piece, or you can cut in half if you need a shorter pipe. If you shorten it, we recommend that you use the half-size pipe on one end and the steel bracket or steel plate on the other end. The possibilities are as many as there are builds and builders. Length : 180mm (7.08")Thickness : 2mm (0.08")Outer Ø : 95mm (3.74")Inner Ø : 91mm (3.58")Material : SteelWeight : 650g (1.43lb) An assortment of mounting accessoriesTo make the installation of Air Jack 90C as simple as possible, Nuke Performance has developed a range of mounting accessories. A plate, bracket and pipe are available, all in weldable steel and adapted for direct fitment of the Air Jack 90 C to your vehicle. All parts are easy to adapt to your intended dimension needs.Steel Plate Part # : 590-10-109Steel Bracket Part # : 590-10-108Steel Tube / Pipe Part # : 590-10-110..
81.60€
Ex Tax:68.00€
Pneufit Quick Connect T-Fitting for 8mm (5/16") hose. Fits 8 BAR / 120 PSI air jack systems or 8mm (5/16") vacuum hose. Pneufit T-Fitting for 8 BAR (120 PSI) air jack setups. Easy to mount with the integrated brackets. Fits the 8mm pneumatic hose included with Air Jack 90 C hose kit. Used on Nuke Performance products: Air Jack 90 Competition Air Jack 90 Hose Kit If you wish to change or complement the use of fittings of the highest quality, we recommend that you use our fittings which are designed to withstand high power and excessive wear and in the right combination with the products they were intended for. Quantity : 1pc..
6.84€
Ex Tax:5.70€