Turbo blankets and shields
Cell Saver™ solves the problem of heat soak into batteries, absorbs leaking acids and prevents premature failure due to heat. Batteries are very susceptible to heat and vibration that could cause premature failure and hazardous leaks. Cell Saver™ is very capable of damping vibration and will absorb and neutralize any damaging leaky battery acids. Cell Saver™ is easy to install and excess material can be trimmed to accommodate batteries of most sizes and shapes. Protects batteries from harmful radiant heat Material withstands up to 2000°F radiant heat Traps & neutralizes harmful battery acid Protects environment and your vehicle Completely safe to handle before and during installation Clean finished look with easy installation Kit Includes: 40" L x 7" W insulation material 12" x 7" treated base mat Radiant Heat Resistance: 2000°F..
36.00€
Ex Tax:30.00€
Flex turbo blanket allows to significantly reduce the temperature under the hood, improving the performance of the exhaust. Working temperatures are up to 1000 degrees, momentarily up to 1200 degrees. Our blankets are thick, well made with several layers of high-quality heat-resistant materials, which guarantees trouble-free exploitation. Blanket is of an average size of T25 (e.g. GT20, GT22, GT25, GT28) Size of the blanket: 380x115(one side 155)mm...
53.41€
Ex Tax:44.51€
Form-A-Shield - 42in x 48in (105cm x 120cm) DEI 10516 USA-DEI-10516 Form-A-Shield™ solves the problem of needing a direct contact, extreme heat barrier. Capable of withstanding direct heat of up to 1400°F+, Form-A-Shield can be applied to exhaust headers, manifolds, turbo housings, and downpipes dramatically reducing radiant exhaust temperatures. Formed from 10 mil dimpled aluminum bonded to a high temperature rated basalt thermal barrier material, Form-A-Shield can be applied directly to hot surfaces helping to lower under hood temperatures while keeping more heat in the exhaust system. Extremely pliable and forms to many shapes and configurations Durable and resistant to oil and chemical spills Withstands direct heat up to 1400°F+ Superior insulator anywhere near the path of exhaust pipes Can be applied directly to hot surfaces Fasten with straps, clamps or DEI Locking Ties No adhesive backing NOTE: Use DEI Adhesive Spray with Form-A-Shield on non-hot areas to serve as a heat barrier / reflector Direct Heat Resistance: 1400°F..
174.63€
Ex Tax:145.53€
Form-A-Shield - 12in x 21in (30cm x 53cm) DEI 50519 USA-DEI-50519 Form-A-Shield™ solves the problem of needing a direct contact, extreme heat barrier. Capable of withstanding direct heat of up to 1400°F+, Form-A-Shield can be applied to exhaust headers, manifolds, turbo housings, and downpipes dramatically reducing radiant exhaust temperatures. Formed from 10 mil dimpled aluminum bonded to a high temperature rated basalt thermal barrier material, Form-A-Shield can be applied directly to hot surfaces helping to lower under hood temperatures while keeping more heat in the exhaust system. Extremely pliable and forms to many shapes and configurations Durable and resistant to oil and chemical spills Withstands direct heat up to 1400°F+ Superior insulator anywhere near the path of exhaust pipes Can be applied directly to hot surfaces Fasten with straps, clamps or DEI Locking Ties No adhesive backing NOTE: Use DEI Adhesive Spray with Form-A-Shield on non-hot areas to serve as a heat barrier / reflector Direct Heat Resistance: 1400°F..
36.00€
Ex Tax:30.00€
Form-A-Shield™ - 21in x 48in (53cm x 122cm) USA-DEI-10517 Form-A-Shield™ solves the problem of needing a direct contact, extreme heat barrier. Capable of withstanding direct heat of up to 1400°F+, Form-A-Shield can be applied to exhaust headers, manifolds, turbo housings, and downpipes dramatically reducing radiant exhaust temperatures. Formed from 10 mil dimpled aluminum bonded to a high temperature rated basalt thermal barrier material, Form-A-Shield can be applied directly to hot surfaces helping to lower under hood temperatures while keeping more heat in the exhaust system. Extremely pliable and forms to many shapes and configurations Durable and resistant to oil and chemical spills Withstands direct heat up to 1400°F+ Superior insulator anywhere near the path of exhaust pipes Can be applied directly to hot surfaces Fasten with straps, clamps or DEI Locking Ties No adhesive backing NOTE: Use DEI Adhesive Spray with Form-A-Shield on non-hot areas to serve as a heat barrier / reflector Direct Heat Resistance: 1400°F..
102.44€
Ex Tax:85.37€
The professional heat shield Inconel FMIC.Pro is widely used in motorsport. It is ideal for insulating high temperatures from exhaust system components, such as manifolds, downpipes, mufflers, catalytic converters and turbochargers. Inconel, from which the heat shield is made, significantly exceeds with its properties similar shields made of stainless steel. Higher resistance to high temperatures has made it possible to reduce the thickness of the heat shield, which in combination with embossing makes it much easier to form and fit the sheet to the insulated element. It is easy to weld and extremely durable. A product for professional use, chosen by professional drivers. Dimensions of the mat: 50x60cm Material: Stamped Inconel..
24.15€
Ex Tax:20.12€
The professional heat shield Inconel FMIC.Pro is widely used in motorsport. It is ideal for insulating high temperatures from exhaust system components, such as manifolds, downpipes, mufflers, catalytic converters and turbochargers. Inconel, from which the heat shield is made, significantly exceeds with its properties similar shields made of stainless steel. Higher resistance to high temperatures has made it possible to reduce the thickness of the heat shield, which in combination with embossing makes it much easier to form and fit the sheet to the insulated element. It is easy to weld and extremely durable. A product for professional use, chosen by professional drivers. Dimensions of the mat: 100x60cm Material: Stamped Inconel..
41.22€
Ex Tax:34.35€
The professional heat shield Inconel FMIC.Pro is widely used in motorsport. It is ideal for insulating high temperatures from exhaust system components, such as manifolds, downpipes, mufflers, catalytic converters and turbochargers. Inconel, from which the heat shield is made, significantly exceeds with its properties similar shields made of stainless steel while a thick layer of ceramic matting additionally insulates the temperature. Higher resistance to high temperatures has made it possible to reduce the thickness of the heat shield, which in combination with embossing makes it much easier to form and fit the sheet to the insulated element. It is easy to weld and extremely durable. A product for professional use, chosen by professional drivers. Dimensions of the mat: 50x60cm Material: Stamped Inconel..
33.90€
Ex Tax:28.25€
The professional heat shield Inconel FMIC.Pro is widely used in motorsport. It is ideal for insulating high temperatures from exhaust system components, such as manifolds, downpipes, mufflers, catalytic converters and turbochargers. Inconel, from which the heat shield is made, significantly exceeds with its properties similar shields made of stainless steel while a thick layer of ceramic matting additionally insulates the temperature. Higher resistance to high temperatures has made it possible to reduce the thickness of the heat shield, which in combination with embossing makes it much easier to form and fit the sheet to the insulated element. It is easy to weld and extremely durable. A product for professional use, chosen by professional drivers. Dimensions of the mat: 100x60cm Material: Stamped Inconel..
53.41€
Ex Tax:44.51€
Muffler Shield Kit DEI 10529 USA-DEI-10529 Muffler Shield Kit solves the problem of heat soak into interiors and components from mufflers that are close to floors. The Best muffler shield/wrap on the market. Based off our proven Floor and Tunnel II heat shield, our new Muffler Shield is designed to wrap around just about any size muffler. Includes our tough Stainless Steel positive locking ties for a tight secure installation. Made from 10mil dimpled aluminum with a 1/8" needle glass insulator it can be easily trimmed to fit most mufflers. Greatly reduces radiant heat coming off your muffler resulting in a cooler interior and protection from damaging heat. NOTE: intended for street legal vehicle use only. For performance racing or heavy industrial applications, use Form-A-Shield instead. Greatly reduce radiant heat from street muffler Cooler interior Protect from damaging heat Kit includes FREE Locking Tie Tool Kit Includes: 1 - 42" x 24" Muffler Shield 4 - 40" x 1/2" Positive Locking Ties 1 - Locking Tie Tool Direct Heat Resistance: 700°F..
77.07€
Ex Tax:64.23€
Heat-insulated cover for spark plugs from FMIC.EU. Made of fiberglass, well insulates plugs/pipes from external heat sources (e.g. exhaust manifold). Maintaining constant, lower temperature ensures a stable spark. The price is for one piece...
7.80€
Ex Tax:6.50€
Heat-insulated cover for spark plugs from FMIC.EU. Made of fiberglass, well insulates plugs/pipes from external heat sources (e.g. exhaust manifold). Maintaining constant, lower temperature ensures a stable spark. The price is for one piece...
10.98€
Ex Tax:9.15€
Made from durable 304 stainless steel and preformed with a curved shape to fit most any size pipes. Two layers of 304 stainless encapsulate a high temperature insulation, allowing up to a 2000°F direct temperature rating. Standoffs 1/2” high provide an air gap to the pipe and making mounting easy with provided stainless clamps. Two sizes available. Features: Stainless Steel Heat Barrier material on outside surfaces Insulating inner layer Welded seams for strength and durability Stainless Steel stand offs to create air gap Advantages: Extremely light weight Block heat & protect components better than factory shields Easy to install with stainless straps Flexible to shape around pipes Benefits: Helps prevent burns & blocks uncomfortable heat Protects components from heat damage Increases driver & passenger comfort..
112.20€
Ex Tax:93.50€
Made from durable 304 stainless steel and preformed with a curved shape to fit most any size pipes. Two layers of 304 stainless encapsulate a high temperature insulation, allowing up to a 2000°F direct temperature rating. Standoffs 1/2” high provide an air gap to the pipe and making mounting easy with provided stainless clamps. Two sizes available. Features: Stainless Steel Heat Barrier material on outside surfaces Insulating inner layer Welded seams for strength and durability Stainless Steel stand offs to create air gap Advantages: Extremely light weight Block heat & protect components better than factory shields Easy to install with stainless straps Flexible to shape around pipes Benefits: Helps prevent burns & blocks uncomfortable heat Protects components from heat damage Increases driver & passenger comfort..
121.95€
Ex Tax:101.63€
Universal heat shield pads. Made from double sided high grade Stainless Steel with silica insulation. Welded seams seal the insulation between the stainless steel making for a durable, long lasting shield. Grommet holes allow for easy mounting. Capable of 2000°F direct heat. Can be hand formed to fit bends and curves. Available in two sizes. Durable 306 stainless steel Dual layer with high temperature insulation Withstands radiant temperatures up to 2000°F Welded edges for strength Integrated grommets for easy, secure mounting..
135.61€
Ex Tax:113.01€
Flex turbo blanket allows to significantly reduce the temperature under the hood, improving the performance of the exhaust. Working temperatures are up to 800 degrees, temporarily up to 1000 degrees. Our blankets are thick, well made with several layers of high-quality heat-resistant materials, which guarantees trouble-free exploitation. Blanket is of an average size of T3 (e.g. Garrett GT28RS, IHI VF34). Size of the blanket: 450x170mm..
58.29€
Ex Tax:48.58€
Flex turbo blanket allows to significantly reduce the temperature under the hood, improving the performance of the exhaust. Working temperatures are up to 800 degrees, temporarily up to 1000 degrees. Our blankets are thick, well made with several layers of high-quality heat-resistant materials, which guarantees trouble-free exploitation. Size of the blanket: 460x190mm..
70.49€
Ex Tax:58.74€
MAGMA STRONG turbo blanket with reinforcement designed for highest resistance to extremely high temperatures (up to 1650˚C). It helps to significantly reduce the temperature under the hood, which has a positive effect on engine and cooling system components. Also blanket improving exhaust outlet speed. Blanket is thick, solidly made of several layers of high quality heat-resistant materials. Additional advantage is reinforcement of the inner part to facilitate the possible removal of the cast iron blanket. The product is intended for smaller turbochargers (e.g. GT20, GT22, GT25, GT28). The blanket after heating is not suitable for disassembly and reinstallation !!..
55.85€
Ex Tax:46.54€
MAGMA STRONG turbo blanket with reinforcement designed for highest resistance to extremely high temperatures (up to 1650˚C). It helps to significantly reduce the temperature under the hood, which has a positive effect on engine and cooling system components. Also blanket improving exhaust outlet speed. Blanket is thick, solidly made of several layers of high quality heat-resistant materials. Additional advantage is reinforcement of the inner part to facilitate the possible removal of the cast iron blanket. The product is intended for medium turbochargers (e.g. Garrett GT28, GT30, GT35, IHI VF34). The blanket after heating is not suitable for disassembly and reinstallation !!..
60.73€
Ex Tax:50.61€
MAGMA STRONG turbo blanket with reinforcement designed for highest resistance to extremely high temperatures (up to 1650˚C). It helps to significantly reduce the temperature under the hood, which has a positive effect on engine and cooling system components. Also blanket improving exhaust outlet speed. Blanket is thick, solidly made of several layers of high quality heat-resistant materials. Additional advantage is reinforcement of the inner part to facilitate the possible removal of the cast iron blanket. The product is intended for big turbochargers (e.g. Garrett GT40, GT42, GT45, Holset HX40). The blanket after heating is not suitable for disassembly and reinstallation !!..
65.61€
Ex Tax:54.67€
Blanket for MAGMA type turbo with the highest resistance to extreme temperatures (up to 1650˚C). It helps to greatly reduce temperature under the hood, which has a beneficial effect on the engine and the cooling system components, further improving the exhaust rate. Our blankets are thick, solidly made of several layers of high-quality heat-resistant materials, which guarantees trouble-free use. Blankets with an average size of T25 (e.g. GT20, GT22, GT25, GT28)...
50.98€
Ex Tax:42.48€
Blanket for MAGMA type turbo with the highest resistance to extreme temperatures (up to 1650˚C). It helps to greatly reduce temperature under the hood, which has a beneficial effect on the engine and the cooling system components, further improving the exhaust rate. Our blankets are thick, solidly made of several layers of high-quality heat-resistant materials, which guarantees trouble-free use. Blankets with an average size of T3 (e.g. Garrett GT28, GT30, GT35, IHI VF34, etc.)...
55.85€
Ex Tax:46.54€
Blanket for MAGMA type turbo with the highest resistance to extreme temperatures (up to 1650˚C). It helps to greatly reduce temperature under the hood, which has a beneficial effect on the engine and the cooling system components, further improving the exhaust rate. Our blankets are thick, solidly made of several layers of high-quality heat-resistant materials, which guarantees trouble-free use. Blankets with an average size of T4 (e.g. Garrett GT40, GT42, GT45, Holset HX40 itd.)...
60.73€
Ex Tax:50.61€
BLACK STRONG turbo blanket with reinforcement designed for highest resistance to extremely high temperatures (up to 1650˚C). It helps to significantly reduce the temperature under the hood, which has a positive effect on engine and cooling system components. Also blanket improving exhaust outlet speed. Blanket is thick, solidly made of several layers of high quality heat-resistant materials. Additional advantage is reinforcement of the inner part to facilitate the possible removal of the cast iron blanket. The product is intended for smaller turbochargers (e.g. GT20, GT22, GT25, GT28). The blanket after heating is not suitable for disassembly and reinstallation !!..
48.54€
Ex Tax:40.45€
Turbo blanket allows to significantly reduce the temperature under the hood, improving the performance of the exhaust. Our blankets are thick, well made with several layers of high-quality heat-resistant materials, which guarantees trouble-free exploitation. Blanket is of an average size of T25 (e.g. GT20, GT22, GT25, GT28) is available in silver and black.koc - black..
46.10€
Ex Tax:38.41€
Turbo blanket allows to significantly reduce the temperature under the hood, improving the performance of the exhaust. Our blankets are thick, well made with several layers of high-quality heat-resistant materials, which guarantees trouble-free exploitation. Blanket is of an average size of T25 (e.g. GT20, GT22, GT25, GT28) is available in silver and black.koc - silver..
46.10€
Ex Tax:38.41€
Turbo blanket allows to significantly reduce the temperature under the hood, improving the performance of the exhaust. Our blankets are thick, well made with several layers of high-quality heat-resistant materials, which guarantees trouble-free exploitation. Blanket is of an average size of T3 (e.g. Garrett GT28RS, IHI VF34) is available in silver and black. Pictures show a blanket T3 compared to T4.koc - black..
58.29€
Ex Tax:48.58€
Turbo blanket allows to significantly reduce the temperature under the hood, improving the performance of the exhaust. Our blankets are thick, well made with several layers of high-quality heat-resistant materials, which guarantees trouble-free exploitation. Blanket is of an average size of T3 (e.g. Garrett GT28RS, IHI VF34) is available in silver and black. Pictures show a blanket T3 compared to T4.koc - silver..
58.29€
Ex Tax:48.58€
Turbo blanket allows to significantly reduce the temperature under the hood, improving the performance of the exhaust. Our blankets are thick, well made with several layers of high-quality heat-resistant materials, which guarantees trouble-free exploitation. Blanket is of an average size of T4 (e.g. Garrett GT40, Holset HX4) is available in silver and black. Pictures show a blanket T3 compared to T4.koc - black..
70.49€
Ex Tax:58.74€
Turbo blanket allows to significantly reduce the temperature under the hood, improving the performance of the exhaust. Our blankets are thick, well made with several layers of high-quality heat-resistant materials, which guarantees trouble-free exploitation. Blanket is of an average size of T4 (e.g. Garrett GT40, Holset HX4) is available in silver and black. Pictures show a blanket T3 compared to T4.koc - silver..
70.49€
Ex Tax:58.74€
FMIC.Pro Carbon fiber Koc na turbo FMIC.Pro to profesjonalny produkt z zupełnie nowej, innowacyjnej serii termoizolacji. Pierwsza, wewnętrzna warstwa wykonana jest z materiału, który dzięki wysokiej zawartości ditlenku krzemu, bez problemu poradzi z rozgrzaną do czerwoności muszlą wydechową turbosprężarki. Wypełnienie koca stanowi gruba warstwa wełny ceramicznej, która skutecznie zatrzymuje temperaturę, a całość obszyta jest materiałem z włókna węglowego (carbon fiber). Dzięki takiemu połączeniu, mimo stałego kontaktu z temperaturami przekraczającymi 1000’C, koc FMIC.Pro stanowi znakomitą barierę termiczną, nie odbarwia się, a po demontażu pozostaje elastyczny i nadaje się do ponownego założenia. Termoizolacja z serii FMIC.Pro może być stosowana w ekstremalnych warunkach, dzięki czemu jest wykorzystywana w profesjonalnych samochodach wyścigowych. Znakomicie obniża temperaturę pod maską, co korzystnie wpływa na pracę silnika i elementy układu chłodzenia, dodatkowo zwiększając energię wylotową spalin. Odporność temperaturowa: 1100’C Rozmiar muszli turbo: T25 Warstwa wewnętrzna: Materiał o dużej zawartości ditlenku krzemionki Warstwa wypełniająca: Wełna ceramiczna Warstwa zewnętrzna: Włókno węglowe (carbon fiber) Materiał obszycia krawędzi: Magma..
92.44€
Ex Tax:77.03€
FMIC.Pro Carbon fiber Koc na turbo FMIC.Pro to profesjonalny produkt z zupełnie nowej, innowacyjnej serii termoizolacji. Pierwsza, wewnętrzna warstwa wykonana jest z materiału, który dzięki wysokiej zawartości ditlenku krzemu, bez problemu poradzi z rozgrzaną do czerwoności muszlą wydechową turbosprężarki. Wypełnienie koca stanowi gruba warstwa wełny ceramicznej, która skutecznie zatrzymuje temperaturę, a całość obszyta jest materiałem z włókna węglowego (carbon fiber). Dzięki takiemu połączeniu, mimo stałego kontaktu z temperaturami przekraczającymi 1000’C, koc FMIC.Pro stanowi znakomitą barierę termiczną, nie odbarwia się, a po demontażu pozostaje elastyczny i nadaje się do ponownego założenia. Termoizolacja z serii FMIC.Pro może być stosowana w ekstremalnych warunkach, dzięki czemu jest wykorzystywana w profesjonalnych samochodach wyścigowych. Znakomicie obniża temperaturę pod maską, co korzystnie wpływa na pracę silnika i elementy układu chłodzenia, dodatkowo zwiększając energię wylotową spalin. Odporność temperaturowa: 1100’C Rozmiar muszli turbo: T3 Warstwa wewnętrzna: Materiał o dużej zawartości ditlenku krzemionki Warstwa wypełniająca: Wełna ceramiczna Warstwa zewnętrzna: Włókno węglowe (carbon fiber) Materiał obszycia krawędzi: Magma..
94.88€
Ex Tax:79.07€
FMIC.Pro Carbon fiber Koc na turbo FMIC.Pro to profesjonalny produkt z zupełnie nowej, innowacyjnej serii termoizolacji. Pierwsza, wewnętrzna warstwa wykonana jest z materiału, który dzięki wysokiej zawartości ditlenku krzemu, bez problemu poradzi z rozgrzaną do czerwoności muszlą wydechową turbosprężarki. Wypełnienie koca stanowi gruba warstwa wełny ceramicznej, która skutecznie zatrzymuje temperaturę, a całość obszyta jest materiałem z włókna węglowego (carbon fiber). Dzięki takiemu połączeniu, mimo stałego kontaktu z temperaturami przekraczającymi 1000’C, koc FMIC.Pro stanowi znakomitą barierę termiczną, nie odbarwia się, a po demontażu pozostaje elastyczny i nadaje się do ponownego założenia. Termoizolacja z serii FMIC.Pro może być stosowana w ekstremalnych warunkach, dzięki czemu jest wykorzystywana w profesjonalnych samochodach wyścigowych. Znakomicie obniża temperaturę pod maską, co korzystnie wpływa na pracę silnika i elementy układu chłodzenia, dodatkowo zwiększając energię wylotową spalin. Odporność temperaturowa: 1100’C Rozmiar muszli turbo: T4 Warstwa wewnętrzna: Materiał o dużej zawartości ditlenku krzemionki Warstwa wypełniająca: Wełna ceramiczna Warstwa zewnętrzna: Włókno węglowe (carbon fiber) Materiał obszycia krawędzi: Magma..
97.32€
Ex Tax:81.10€
FMIC.Pro Inconel Carbon fiber FMIC.Pro turbo blanket is a professional product from a completely new, innovative series of thermal insulation.The first, inner layer is made of inconelu which, thanks to the high resistance to oxidation and corrosion is used in the aviation industry and its melting point is as high as 1300'C. The blanket is filled with a thick layer of ceramic wool, which effectively stops the temperature, and the whole blanket is covered with carbon fiber material. The inconel layer forced the use a stainless steel mesh to cover the blanket, and this additionally increases its durability. Thanks to such a combination, despite constant contact with temperatures exceeding 1000'C, FMIC.Pro blanket is an excellent thermal barrier, does not discolour, and after dismantling it remains flexible and suitable for reapplication. The FMIC.Pro blanket can be used in extreme conditions, making it suitable for professional racing cars. It reduces the temperature under the hood perfectly, which has a positive effect on the engine and cooling system components, further increasing the exhaust energy. Temperature resistance: 1250'C Turbo shell size: T25 Interior layer: Inconel Filling layer: Ceramic wool External layer: Carbon fibres Edge trimming material: Stainless steel..
116.83€
Ex Tax:97.36€
FMIC.Pro Inconel Carbon fiber FMIC.Pro turbo blanket is a professional product from a completely new, innovative series of thermal insulation.The first, inner layer is made of inconelu which, thanks to the high resistance to oxidation and corrosion is used in the aviation industry and its melting point is as high as 1300'C. The blanket is filled with a thick layer of ceramic wool, which effectively stops the temperature, and the whole blanket is covered with carbon fiber material. The inconel layer forced the use a stainless steel mesh to cover the blanket, and this additionally increases its durability. Thanks to such a combination, despite constant contact with temperatures exceeding 1000'C, FMIC.Pro blanket is an excellent thermal barrier, does not discolour, and after dismantling it remains flexible and suitable for reapplication. The FMIC.Pro blanket can be used in extreme conditions, making it suitable for professional racing cars. It reduces the temperature under the hood perfectly, which has a positive effect on the engine and cooling system components, further increasing the exhaust energy. Temperature resistance: 1250'C Turbo shell size: T3 Interior layer: Inconel Filling layer: Ceramic wool External layer: Carbon fibres Edge trimming material: Stainless steel..
119.27€
Ex Tax:99.39€
FMIC.Pro Inconel Carbon fiber FMIC.Pro turbo blanket is a professional product from a completely new, innovative series of thermal insulation.The first, inner layer is made of inconelu which, thanks to the high resistance to oxidation and corrosion is used in the aviation industry and its melting point is as high as 1300'C. The blanket is filled with a thick layer of ceramic wool, which effectively stops the temperature, and the whole blanket is covered with carbon fiber material. The inconel layer forced the use a stainless steel mesh to cover the blanket, and this additionally increases its durability. Thanks to such a combination, despite constant contact with temperatures exceeding 1000'C, FMIC.Pro blanket is an excellent thermal barrier, does not discolour, and after dismantling it remains flexible and suitable for reapplication. The FMIC.Pro blanket can be used in extreme conditions, making it suitable for professional racing cars. It reduces the temperature under the hood perfectly, which has a positive effect on the engine and cooling system components, further increasing the exhaust energy. Temperature resistance: 1250'C Turbo shell size: T4 Interior layer: Inconel Filling layer: Ceramic wool External layer: Carbon fibres Edge trimming material: Stainless steel..
121.70€
Ex Tax:101.42€
FMIC.Pro Inconel Magma Carbon Fiber FMIC.Pro turbo blanket is a professional product from a completely new, innovative series of thermal insulation.The first, inner layer is made of inconelu which, thanks to the high resistance to oxidation and corrosion is used in the aviation industry and its melting point is as high as 1300'C. The blanket is filled with a thick layer of ceramic wool, which effectively stops the temperature, and the whole blanket is covered with magma style material, used in thermal insulation bandages, additionally interlaced with carbon fibres. The inconel layer forced the use a stainless steel mesh to cover the blanket, and this additionally increases its durability. Thanks to such a combination, despite constant contact with temperatures exceeding 1000'C, FMIC.Pro blanket is an excellent thermal barrier, does not discolour, and after dismantling it remains flexible and suitable for reapplication. The FMIC.Pro blanket can be used in extreme conditions, making it suitable for professional racing cars. It reduces the temperature under the hood perfectly, which has a positive effect on the engine and cooling system components, further increasing the exhaust energy. Temperature resistance: 1250'C Turbo shell size: T25 Interior layer: Inconel Filling layer: Ceramic wool External layer: Magma interlaced with carbon fibres Edge trimming material: Stainless steel..
104.64€
Ex Tax:87.20€
FMIC.Pro Inconel Magma Carbon Fiber FMIC.Pro turbo blanket is a professional product from a completely new, innovative series of thermal insulation.The first, inner layer is made of inconelu which, thanks to the high resistance to oxidation and corrosion is used in the aviation industry and its melting point is as high as 1300'C. The blanket is filled with a thick layer of ceramic wool, which effectively stops the temperature, and the whole blanket is covered with magma style material, used in thermal insulation bandages, additionally interlaced with carbon fibres. The inconel layer forced the use a stainless steel mesh to cover the blanket, and this additionally increases its durability. Thanks to such a combination, despite constant contact with temperatures exceeding 1000'C, FMIC.Pro blanket is an excellent thermal barrier, does not discolour, and after dismantling it remains flexible and suitable for reapplication. The FMIC.Pro blanket can be used in extreme conditions, making it suitable for professional racing cars. It reduces the temperature under the hood perfectly, which has a positive effect on the engine and cooling system components, further increasing the exhaust energy. Temperature resistance: 1250'C Turbo shell size: T3 Interior layer: Inconel Filling layer: Ceramic wool External layer: Magma interlaced with carbon fibres Edge trimming material: Stainless steel..
107.08€
Ex Tax:89.23€
FMIC.Pro Inconel Magma Carbon Fiber FMIC.Pro turbo blanket is a professional product from a completely new, innovative series of thermal insulation.The first, inner layer is made of inconelu which, thanks to the high resistance to oxidation and corrosion is used in the aviation industry and its melting point is as high as 1300'C. The blanket is filled with a thick layer of ceramic wool, which effectively stops the temperature, and the whole blanket is covered with magma style material, used in thermal insulation bandages, additionally interlaced with carbon fibres. The inconel layer forced the use a stainless steel mesh to cover the blanket, and this additionally increases its durability. Thanks to such a combination, despite constant contact with temperatures exceeding 1000'C, FMIC.Pro blanket is an excellent thermal barrier, does not discolour, and after dismantling it remains flexible and suitable for reapplication. The FMIC.Pro blanket can be used in extreme conditions, making it suitable for professional racing cars. It reduces the temperature under the hood perfectly, which has a positive effect on the engine and cooling system components, further increasing the exhaust energy. Temperature resistance: 1250'C Turbo shell size: T4 Interior layer: Inconel Filling layer: Ceramic wool External layer: Magma interlaced with carbon fibres Edge trimming material: Stainless steel..
109.51€
Ex Tax:91.26€
FMIC.Pro Inconel Magma Koc na turbo FMIC.Pro to profesjonalny produkt z zupełnie nowej, innowacyjnej serii termoizolacji. Pierwsza, wewnętrzna warstwa wykonana jest z inconelu, który dzięki odporności na utlenianie i korozję znajduje zastosowanie w przemyśle lotniczym, a jego temperatura topnienia sięga aż 1300’C. Wypełnienie koca stanowi gruba warstwa wełny ceramicznej, która skutecznie zatrzymuje temperaturę, a całość obszyta jest materiałem typu magma, znajdującego zastosowanie w bandażach termoizolacyjnych. Użycie warstwy z inconelu wymusiło zastosowania siatki nierdzewnej do obszycia koca, co dodatkowo wpływa na jego trwałość. Dzięki takiemu połączeniu, mimo stałego kontaktu z temperaturami przekraczającymi 1000’C, koc FMIC.Pro stanowi znakomitą barierę termiczną, nie odbarwia się, a po demontażu pozostaje elastyczny i nadaje się do ponownego założenia. Termoizolacja z serii FMIC.Pro może być stosowana w ekstremalnych warunkach, dzięki czemu jest wykorzystywana w profesjonalnych samochodach wyścigowych. Znakomicie obniża temperaturę pod maską, co korzystnie wpływa na pracę silnika i elementy układu chłodzenia, dodatkowo zwiększając energię wylotową spalin. Odporność temperaturowa: 1250’C Rozmiar muszli turbo: T25 Warstwa wewnętrzna: Inconel Warstwa wypełniająca: Wełna ceramiczna Warstwa zewnętrzna: Magma Materiał obszycia krawędzi: Stal nierdzewna..
92.44€
Ex Tax:77.03€
FMIC.Pro Inconel Magma Koc na turbo FMIC.Pro to profesjonalny produkt z zupełnie nowej, innowacyjnej serii termoizolacji. Pierwsza, wewnętrzna warstwa wykonana jest z inconelu, który dzięki odporności na utlenianie i korozję znajduje zastosowanie w przemyśle lotniczym, a jego temperatura topnienia sięga aż 1300’C. Wypełnienie koca stanowi gruba warstwa wełny ceramicznej, która skutecznie zatrzymuje temperaturę, a całość obszyta jest materiałem typu magma, znajdującego zastosowanie w bandażach termoizolacyjnych. Użycie warstwy z inconelu wymusiło zastosowania siatki nierdzewnej do obszycia koca, co dodatkowo wpływa na jego trwałość. Dzięki takiemu połączeniu, mimo stałego kontaktu z temperaturami przekraczającymi 1000’C, koc FMIC.Pro stanowi znakomitą barierę termiczną, nie odbarwia się, a po demontażu pozostaje elastyczny i nadaje się do ponownego założenia. Termoizolacja z serii FMIC.Pro może być stosowana w ekstremalnych warunkach, dzięki czemu jest wykorzystywana w profesjonalnych samochodach wyścigowych. Znakomicie obniża temperaturę pod maską, co korzystnie wpływa na pracę silnika i elementy układu chłodzenia, dodatkowo zwiększając energię wylotową spalin. Odporność temperaturowa: 1250’C Rozmiar muszli turbo: T3 Warstwa wewnętrzna: Inconel Warstwa wypełniająca: Wełna ceramiczna Warstwa zewnętrzna: Magma Materiał obszycia krawędzi: Stal nierdzewna..
94.88€
Ex Tax:79.07€
FMIC.Pro Inconel Magma Koc na turbo FMIC.Pro to profesjonalny produkt z zupełnie nowej, innowacyjnej serii termoizolacji. Pierwsza, wewnętrzna warstwa wykonana jest z inconelu, który dzięki odporności na utlenianie i korozję znajduje zastosowanie w przemyśle lotniczym, a jego temperatura topnienia sięga aż 1300’C. Wypełnienie koca stanowi gruba warstwa wełny ceramicznej, która skutecznie zatrzymuje temperaturę, a całość obszyta jest materiałem typu magma, znajdującego zastosowanie w bandażach termoizolacyjnych. Użycie warstwy z inconelu wymusiło zastosowania siatki nierdzewnej do obszycia koca, co dodatkowo wpływa na jego trwałość. Dzięki takiemu połączeniu, mimo stałego kontaktu z temperaturami przekraczającymi 1000’C, koc FMIC.Pro stanowi znakomitą barierę termiczną, nie odbarwia się, a po demontażu pozostaje elastyczny i nadaje się do ponownego założenia. Termoizolacja z serii FMIC.Pro może być stosowana w ekstremalnych warunkach, dzięki czemu jest wykorzystywana w profesjonalnych samochodach wyścigowych. Znakomicie obniża temperaturę pod maską, co korzystnie wpływa na pracę silnika i elementy układu chłodzenia, dodatkowo zwiększając energię wylotową spalin. Odporność temperaturowa: 1250’C Rozmiar muszli turbo: T4 Warstwa wewnętrzna: Inconel Warstwa wypełniająca: Wełna ceramiczna Warstwa zewnętrzna: Magma Materiał obszycia krawędzi: Stal nierdzewna..
97.32€
Ex Tax:81.10€
FMIC.Pro Magma Carbon Fiber FMIC.Pro turbo blanket is a professional product from a completely new, innovative series of thermal insulation.The first, inner layer is made of a material which, thanks to the high content of silicon dioxide, can easily handle the red-hot exhaust shell of the turbocharger. The blanket is filled with a thick layer of ceramic wool, which effectively stops the temperature, and the whole blanket is covered with magma style material, used in thermal insulation bandages, additionally interlaced with carbon fibres. Thanks to such a combination, despite constant contact with temperatures exceeding 1000'C, FMIC.Pro blanket is an excellent thermal barrier, does not discolour, and after dismantling it remains flexible and suitable for reapplication. The FMIC.Pro blanket can be used in extreme conditions, making it suitable for professional racing cars. It reduces the temperature under the hood perfectly, which has a positive effect on the engine and cooling system components, further increasing the exhaust energy. Temperature resistance: 1100'C Turbo shell size: T25 Interior layer: Material with high silica dioxide content Filling layer: Ceramic wool External layer: Magma interlaced with carbon fibres Edge trimming material: Magma..
80.24€
Ex Tax:66.87€
FMIC.Pro Magma Carbon Fiber FMIC.Pro turbo blanket is a professional product from a completely new, innovative series of thermal insulation.The first, inner layer is made of a material which, thanks to the high content of silicon dioxide, can easily handle the red-hot exhaust shell of the turbocharger. The blanket is filled with a thick layer of ceramic wool, which effectively stops the temperature, and the whole blanket is covered with magma style material, used in thermal insulation bandages, additionally interlaced with carbon fibres. Thanks to such a combination, despite constant contact with temperatures exceeding 1000'C, FMIC.Pro blanket is an excellent thermal barrier, does not discolour, and after dismantling it remains flexible and suitable for reapplication. The FMIC.Pro blanket can be used in extreme conditions, making it suitable for professional racing cars. It reduces the temperature under the hood perfectly, which has a positive effect on the engine and cooling system components, further increasing the exhaust energy. Temperature resistance: 1100'C Turbo shell size: T3 Interior layer: Material with high silica dioxide content Filling layer: Ceramic wool External layer: Magma interlaced with carbon fibres Edge trimming material: Magma..
82.68€
Ex Tax:68.90€
FMIC.Pro Magma Carbon Fiber FMIC.Pro turbo blanket is a professional product from a completely new, innovative series of thermal insulation.The first, inner layer is made of a material which, thanks to the high content of silicon dioxide, can easily handle the red-hot exhaust shell of the turbocharger. The blanket is filled with a thick layer of ceramic wool, which effectively stops the temperature, and the whole blanket is covered with magma style material, used in thermal insulation bandages, additionally interlaced with carbon fibres. Thanks to such a combination, despite constant contact with temperatures exceeding 1000'C, FMIC.Pro blanket is an excellent thermal barrier, does not discolour, and after dismantling it remains flexible and suitable for reapplication. The FMIC.Pro blanket can be used in extreme conditions, making it suitable for professional racing cars. It reduces the temperature under the hood perfectly, which has a positive effect on the engine and cooling system components, further increasing the exhaust energy. Temperature resistance: 1100'C Turbo shell size: T4 Interior layer: Material with high silica dioxide content Filling layer: Ceramic wool External layer: Magma interlaced with carbon fibres Edge trimming material: Magma..
85.12€
Ex Tax:70.94€
FMIC.Pro Magma FMIC.Pro turbo blanket is a professional product from a completely new, innovative series of thermal insulation.The first, inner layer is made of a material which, thanks to the high content of silicon dioxide, can easily handle the red-hot exhaust shell of the turbocharger. The blanket is filled with a thick layer of ceramic wool, which effectively stops the temperature, and the whole blanket is covered with magma style material, used in thermal insulation bandages. Thanks to such a combination, despite constant contact with temperatures exceeding 1000'C, FMIC.Pro blanket is an excellent thermal barrier, does not discolour, and after dismantling it remains flexible and suitable for reapplication. The FMIC.Pro blanket can be used in extreme conditions, making it suitable for professional racing cars. It reduces the temperature under the hood perfectly, which has a positive effect on the engine and cooling system components, further increasing the exhaust energy. Temperature resistance: 1100'C Turbo shell size: T25 Interior layer: Material with high silica dioxide content Filling layer: Ceramic wool External layer: Magma Edge trimming material: Magma..
68.05€
Ex Tax:56.71€
FMIC.Pro Magma FMIC.Pro turbo blanket is a professional product from a completely new, innovative series of thermal insulation.The first, inner layer is made of a material which, thanks to the high content of silicon dioxide, can easily handle the red-hot exhaust shell of the turbocharger. The blanket is filled with a thick layer of ceramic wool, which effectively stops the temperature, and the whole blanket is covered with magma style material, used in thermal insulation bandages. Thanks to such a combination, despite constant contact with temperatures exceeding 1000'C, FMIC.Pro blanket is an excellent thermal barrier, does not discolour, and after dismantling it remains flexible and suitable for reapplication. The FMIC.Pro blanket can be used in extreme conditions, making it suitable for professional racing cars. It reduces the temperature under the hood perfectly, which has a positive effect on the engine and cooling system components, further increasing the exhaust energy. Temperature resistance: 1100'C Turbo shell size: T3 Interior layer: Material with high silica dioxide content Filling layer: Ceramic wool External layer: Magma Edge trimming material: Magma..
70.49€
Ex Tax:58.74€
FMIC.Pro Magma FMIC.Pro turbo blanket is a professional product from a completely new, innovative series of thermal insulation.The first, inner layer is made of a material which, thanks to the high content of silicon dioxide, can easily handle the red-hot exhaust shell of the turbocharger. The blanket is filled with a thick layer of ceramic wool, which effectively stops the temperature, and the whole blanket is covered with magma style material, used in thermal insulation bandages. Thanks to such a combination, despite constant contact with temperatures exceeding 1000'C, FMIC.Pro blanket is an excellent thermal barrier, does not discolour, and after dismantling it remains flexible and suitable for reapplication. The FMIC.Pro blanket can be used in extreme conditions, making it suitable for professional racing cars. It reduces the temperature under the hood perfectly, which has a positive effect on the engine and cooling system components, further increasing the exhaust energy. Temperature resistance: 1100'C Turbo shell size: T4 Interior layer: Material with high silica dioxide content Filling layer: Ceramic wool External layer: Magma Edge trimming material: Magma..
72.93€
Ex Tax:60.77€
FMIC.Pro wastegate blanket is a professional product from a completely new, innovative series of thermal insulation.The first, inner layer is made of a material which, thanks to the high content of silicon dioxide, can easily handle heated up to 1000'C wastegate body. The blanket is filled with a thick layer of ceramic wool, which effectively stops the temperature, and the whole blanket is covered with carbon fiber material. Thanks to such a combination, despite constant contact with temperatures exceeding 1000'C, FMIC.Pro blanket is an excellent thermal barrier, does not discolour, and after dismantling it remains flexible and suitable for reapplication. The FMIC.Pro blanket can be used in extreme conditions, making it suitable for professional racing cars. It reduces the temperature under the hood perfectly, which has a positive effect on the engine and cooling system components. Temperature resistance: 1100'C Wastegate size: 35/38mm Interior layer: Material with high silica dioxide content Filling layer: Ceramic wool External layer: Carbon fibres Edge trimming material: Magma..
60.73€
Ex Tax:50.61€
FMIC.Pro wastegate blanket is a professional product from a completely new, innovative series of thermal insulation.The first, inner layer is made of a material which, thanks to the high content of silicon dioxide, can easily handle heated up to 1000'C wastegate body. The blanket is filled with a thick layer of ceramic wool, which effectively stops the temperature, and the whole blanket is covered with magma style material, used in thermal insulation bandages, additionally interlaced with carbon fibres. Thanks to such a combination, despite constant contact with temperatures exceeding 1000'C, FMIC.Pro blanket is an excellent thermal barrier, does not discolour, and after dismantling it remains flexible and suitable for reapplication. The FMIC.Pro blanket can be used in extreme conditions, making it suitable for professional racing cars. It reduces the temperature under the hood perfectly, which has a positive effect on the engine and cooling system components. Temperature resistance: 1100'C Wastegate size: 35/38mm Interior layer: Material with high silica dioxide content Filling layer: Ceramic wool External layer: Magma with carbon fibres Edge trimming material: Magma..
50.98€
Ex Tax:42.48€
FMIC.Pro wastegate blanket is a professional product from a completely new, innovative series of thermal insulation.The first, inner layer is made of a material which, thanks to the high content of silicon dioxide, can easily handle heated up to 1000'C wastegate body. The blanket is filled with a thick layer of ceramic wool, which effectively stops the temperature, and the whole blanket is covered with magma style material, used in thermal insulation bandages. Thanks to such a combination, despite constant contact with temperatures exceeding 1000'C, FMIC.Pro blanket is an excellent thermal barrier, does not discolour, and after dismantling it remains flexible and suitable for reapplication. The FMIC.Pro blanket can be used in extreme conditions, making it suitable for professional racing cars. It reduces the temperature under the hood perfectly, which has a positive effect on the engine and cooling system components. Temperature resistance: 1100'C Wastegate size: 35/38mm Interior layer: Material with high silica dioxide content Filling layer: Ceramic wool External layer: Magma Edge trimming material: Magma..
41.22€
Ex Tax:34.35€
FMIC.Pro wastegate blanket is a professional product from a completely new, innovative series of thermal insulation.The first, inner layer is made of a material which, thanks to the high content of silicon dioxide, can easily handle heated up to 1000'C wastegate body. The blanket is filled with a thick layer of ceramic wool, which effectively stops the temperature, and the whole blanket is covered with carbon fiber material. Thanks to such a combination, despite constant contact with temperatures exceeding 1000'C, FMIC.Pro blanket is an excellent thermal barrier, does not discolour, and after dismantling it remains flexible and suitable for reapplication. The FMIC.Pro blanket can be used in extreme conditions, making it suitable for professional racing cars. It reduces the temperature under the hood perfectly, which has a positive effect on the engine and cooling system components. Temperature resistance: 1100'C Wastegate size: 40/45mm Interior layer: Material with high silica dioxide content Filling layer: Ceramic wool External layer: Carbon fibres Edge trimming material: Magma..
63.17€
Ex Tax:52.64€
FMIC.Pro wastegate blanket is a professional product from a completely new, innovative series of thermal insulation.The first, inner layer is made of a material which, thanks to the high content of silicon dioxide, can easily handle heated up to 1000'C wastegate body. The blanket is filled with a thick layer of ceramic wool, which effectively stops the temperature, and the whole blanket is covered with magma style material, used in thermal insulation bandages, additionally interlaced with carbon fibres. Thanks to such a combination, despite constant contact with temperatures exceeding 1000'C, FMIC.Pro blanket is an excellent thermal barrier, does not discolour, and after dismantling it remains flexible and suitable for reapplication. The FMIC.Pro blanket can be used in extreme conditions, making it suitable for professional racing cars. It reduces the temperature under the hood perfectly, which has a positive effect on the engine and cooling system components. Temperature resistance: 1100'C Wastegate size: 40/45mm Interior layer: Material with high silica dioxide content Filling layer: Ceramic wool External layer: Magma with carbon fibres Edge trimming material: Magma..
53.41€
Ex Tax:44.51€
FMIC.Pro wastegate blanket is a professional product from a completely new, innovative series of thermal insulation.The first, inner layer is made of a material which, thanks to the high content of silicon dioxide, can easily handle heated up to 1000'C wastegate body. The blanket is filled with a thick layer of ceramic wool, which effectively stops the temperature, and the whole blanket is covered with magma style material, used in thermal insulation bandages. Thanks to such a combination, despite constant contact with temperatures exceeding 1000'C, FMIC.Pro blanket is an excellent thermal barrier, does not discolour, and after dismantling it remains flexible and suitable for reapplication. The FMIC.Pro blanket can be used in extreme conditions, making it suitable for professional racing cars. It reduces the temperature under the hood perfectly, which has a positive effect on the engine and cooling system components. Temperature resistance: 1100'C Wastegate size: 40/45mm Interior layer: Material with high silica dioxide content Filling layer: Ceramic wool External layer: Magma Edge trimming material: Magma..
43.66€
Ex Tax:36.38€
FMIC.Pro wastegate blanket is a professional product from a completely new, innovative series of thermal insulation.The first, inner layer is made of a material which, thanks to the high content of silicon dioxide, can easily handle heated up to 1000'C wastegate body. The blanket is filled with a thick layer of ceramic wool, which effectively stops the temperature, and the whole blanket is covered with carbon fiber material. Thanks to such a combination, despite constant contact with temperatures exceeding 1000'C, FMIC.Pro blanket is an excellent thermal barrier, does not discolour, and after dismantling it remains flexible and suitable for reapplication. The FMIC.Pro blanket can be used in extreme conditions, making it suitable for professional racing cars. It reduces the temperature under the hood perfectly, which has a positive effect on the engine and cooling system components. Temperature resistance: 1100'C Wastegate size: 50/54mm Interior layer: Material with high silica dioxide content Filling layer: Ceramic wool External layer: Carbon fibres Edge trimming material: Magma..
65.61€
Ex Tax:54.67€
FMIC.Pro wastegate blanket is a professional product from a completely new, innovative series of thermal insulation.The first, inner layer is made of a material which, thanks to the high content of silicon dioxide, can easily handle heated up to 1000'C wastegate body. The blanket is filled with a thick layer of ceramic wool, which effectively stops the temperature, and the whole blanket is covered with magma style material, used in thermal insulation bandages, additionally interlaced with carbon fibres. Thanks to such a combination, despite constant contact with temperatures exceeding 1000'C, FMIC.Pro blanket is an excellent thermal barrier, does not discolour, and after dismantling it remains flexible and suitable for reapplication. The FMIC.Pro blanket can be used in extreme conditions, making it suitable for professional racing cars. It reduces the temperature under the hood perfectly, which has a positive effect on the engine and cooling system components. Temperature resistance: 1100'C Wastegate size: 50/54mm Interior layer: Material with high silica dioxide content Filling layer: Ceramic wool External layer: Magma with carbon fibres Edge trimming material: Magma..
55.85€
Ex Tax:46.54€
FMIC.Pro wastegate blanket is a professional product from a completely new, innovative series of thermal insulation.The first, inner layer is made of a material which, thanks to the high content of silicon dioxide, can easily handle heated up to 1000'C wastegate body. The blanket is filled with a thick layer of ceramic wool, which effectively stops the temperature, and the whole blanket is covered with magma style material, used in thermal insulation bandages. Thanks to such a combination, despite constant contact with temperatures exceeding 1000'C, FMIC.Pro blanket is an excellent thermal barrier, does not discolour, and after dismantling it remains flexible and suitable for reapplication. The FMIC.Pro blanket can be used in extreme conditions, making it suitable for professional racing cars. It reduces the temperature under the hood perfectly, which has a positive effect on the engine and cooling system components. Temperature resistance: 1100'C Wastegate size: 50/54mm Interior layer: Material with high silica dioxide content Filling layer: Ceramic wool External layer: Magma Edge trimming material: Magma..
46.10€
Ex Tax:38.41€
FMIC.Pro wastegate blanket is a professional product from a completely new, innovative series of thermal insulation.The first, inner layer is made of a material which, thanks to the high content of silicon dioxide, can easily handle heated up to 1000'C wastegate body. The blanket is filled with a thick layer of ceramic wool, which effectively stops the temperature, and the whole blanket is covered with carbon fiber material. Thanks to such a combination, despite constant contact with temperatures exceeding 1000'C, FMIC.Pro blanket is an excellent thermal barrier, does not discolour, and after dismantling it remains flexible and suitable for reapplication. The FMIC.Pro blanket can be used in extreme conditions, making it suitable for professional racing cars. It reduces the temperature under the hood perfectly, which has a positive effect on the engine and cooling system components. Temperature resistance: 1100'C Wastegate size: 60mm Interior layer: Material with high silica dioxide content Filling layer: Ceramic wool External layer: Carbon fibres Edge trimming material: Magma..
68.05€
Ex Tax:56.71€
FMIC.Pro wastegate blanket is a professional product from a completely new, innovative series of thermal insulation.The first, inner layer is made of a material which, thanks to the high content of silicon dioxide, can easily handle heated up to 1000'C wastegate body. The blanket is filled with a thick layer of ceramic wool, which effectively stops the temperature, and the whole blanket is covered with magma style material, used in thermal insulation bandages, additionally interlaced with carbon fibres. Thanks to such a combination, despite constant contact with temperatures exceeding 1000'C, FMIC.Pro blanket is an excellent thermal barrier, does not discolour, and after dismantling it remains flexible and suitable for reapplication. The FMIC.Pro blanket can be used in extreme conditions, making it suitable for professional racing cars. It reduces the temperature under the hood perfectly, which has a positive effect on the engine and cooling system components. Temperature resistance: 1100'C Wastegate size: 60mm Interior layer: Material with high silica dioxide content Filling layer: Ceramic wool External layer: Magma with carbon fibres Edge trimming material: Magma..
58.29€
Ex Tax:48.58€
FMIC.Pro wastegate blanket is a professional product from a completely new, innovative series of thermal insulation.The first, inner layer is made of a material which, thanks to the high content of silicon dioxide, can easily handle heated up to 1000'C wastegate body. The blanket is filled with a thick layer of ceramic wool, which effectively stops the temperature, and the whole blanket is covered with magma style material, used in thermal insulation bandages. Thanks to such a combination, despite constant contact with temperatures exceeding 1000'C, FMIC.Pro blanket is an excellent thermal barrier, does not discolour, and after dismantling it remains flexible and suitable for reapplication. The FMIC.Pro blanket can be used in extreme conditions, making it suitable for professional racing cars. It reduces the temperature under the hood perfectly, which has a positive effect on the engine and cooling system components. Temperature resistance: 1100'C Wastegate size: 60mm Interior layer: Material with high silica dioxide content Filling layer: Ceramic wool External layer: Magma Edge trimming material: Magma..
46.10€
Ex Tax:38.41€