Hybrid turbos for series cars
Hybrid turbocharger modification service based on a serial turbocharger. Characterized by a larger and lighter CNC-compressed wheel. Thanks to the reinforced bearings it was possible to prolong the turbocharger's life under increased load. Output of the turbocharger is 150-160 HP and this depends on the engine / condition of the car and related modifications. Characteristics: - Performance bearings - Very fast spool / high performance - 90/107/110/115HP engines We require you to send us your turbocharger. It is possible to buy a turbo already modified - price to be agreed. Modification price and power gains are the same for: Citoren 1.6HDI 90KM/107KM/110KM/115KM Peugeot 1.6HDI 90KM/107KM/110KM/115KM Mini Cooper 110HP/115HP Ford 1.6TDCI 90KM/107KM/110KM/115KM Volvo D2 1.6D 90KM/107KM/110KM/115KM..
629.02€
Ex Tax:524.19€
Hybrid turbocharger modification service, modification on the stock turbocharger. It is characterized by larger and lighter CNC compression wheel. Thanks to reinforced bearings life of the turbocharger is extended, even under increased load. The performance of the turbocharger is 200-230 HP depending on the engine / condition of the car and accompanying modifications. Brief characteristics: - Performance bearings - Fast spool / high performance - Engines 136 / 140 / 163 hp We require you to send us your turbocharger. It is possible to buy a ready-made turbo - price to be agreed. Modification price and power gains are the same for: Citoren 2.0HDI 136HP / 140HP / 163HP Peugeot 2.0HDI 136HP / 140HP / 163HP Ford 2.0TDCI 136HP / 140HP / 163HP Volvo D3 2.0HDI 136HP / 140HP / 163HP..
655.85€
Ex Tax:546.54€
Accord / Civic / CRV 2.2 i-CTDI Manufacturer: Hybrid Turbo SKU: 22D-Honda-Hyb..
682.68€
Ex Tax:568.90€
Hybrid turbocharger modification based on 204, 224, 233, 240 HP versions, for 340/350 HP power Modifications: - exhaust rotor clipping - bigger forged compression wheel - reinforced '360' bearings Characteristics - very fast spool - P&P assembly - high efficiencyTHIS IS A MODIFICATION SERVICE, WE REQUIRE SENDING YOUR TURBINE TO US, REALIZATION TIME UP TO 14 DAYS. It is possible to buy a ready-made turbocharger with earlier price arrangementTHE PRICE DOES NOT INCLUDE THE REPAIR / REGENERATION OF THE DRIVER. IF IT IS DAMAGED THE COST OF A NEW ONE IS 215€. We require sending us your turbocharger first, otherwise we charge a deposit of 185€..
682.68€
Ex Tax:568.90€
GTB 2260vk 1.9CDTI 16V - +300KM Manufacturer: jrspec SKU: GTB-2260VK-opel..
1,365.61€
Ex Tax:1,138.01€
GTB 2260vk 1.9JTDm 16V - +300KM Manufacturer: jrspec SKU: GTB-2260VK-alfa..
1,365.61€
Ex Tax:1,138.01€
GTD2060vz 1.9TD oraz 2.0TDI (VP, PD) 320hp Manufacturer: jrspec SKU: GTD-2060VZ-VW..
1,536.00€
Ex Tax:1,280.00€
Hybrid turbocharger built based on the Garrett / Mitsubishi serial turbine Depending on the delivered turbocharger, we can offer a choice of: stage 1 (bigger CNC compression wheel) stage 2 (bigger CNC compression wheel + bigger exhaust rotor) The whole thing has been checked and properly redrilled. Thanks to the high performance bearings service life of the turbocharger is extended. The modification allows to achieve the range of 200-220 HP (older turbines from M47 version) or 220-250 HP (N47 version). To make modifications, you need to send your turbine to us. If your turbine has cracks, it is necessary to replace it with new one in order to avoid further damage, e.g. to the rotor. Brief description: - High performance bearings - P&P assembly - Fast spool / High performance BMW models: - Series 1 ( E82, E87, F20, F21) - Series 3 ( E46, E90, E91, E92, F30, F31) - Series 5 ( E60, E61, F10, F11)..
629.02€
Ex Tax:524.19€
Hybrid turbocharger based on the serial KKK turbine. It is characterized a larger 11 turbine CNC wheel , larger exhaust wheel after clipping. Review: Modified light wheel after clipping The turbocharger performance is 520hp (560hp on methanol) Plug & play assembly without any modifications...
2,682.68€
Ex Tax:2,235.57€
BMW 135i / 335i / 535i - 306KM Hybrid turbochargers built in 306Km serial turbines Modification allowing up to 600KM with accompanying modifications (intake, fuel, exhaust system)Modifications - Larger forged compression wheel - 9 blade turbine exhaust wheel - modified turbine rotor - racing bearings - quick spool - P&P assembly - high performance The price is valid if the delivered turbine is suitable for regeneration (efficient regulator, undamaged housings, manifold etc.)..
2,536.58€
Ex Tax:2,113.82€
Hybrid turbo modyfication based on 272KM turbocharger ( pre LCI) Biturbo BMW 335d/535d enough to 450KM. Modyfication: small turbo: - turbine wheel - 6+6 CNC - racing bearings Big turbo: - custom turbine wheel, CNC 2nd generation - racing bearings Review - very quick spool - P&P montage - high performance The price depends on the condition of the turbocharger sent. This is a customer turbine rework service..
1,202.20€
Ex Tax:1,001.83€
Hybrid turbocharger based on the serial KKK turbine It is characterized a larger 6 + 6 or 11 turbine CNC wheel Review: Modified light impeller after clipping The turbocharger performance is 450-460ps Plug & play assembly without any modifications. Return of based turbocharger is not required..
1,638.78€
Ex Tax:1,365.65€
HYBRID TURBOCHARGER JRSPEC MERCEDES CDI300 340KM - STAGE 1 Manufacturer: jrspec SKU: MB-CDI300-st1..
682.68€
Ex Tax:568.90€
Hybrid Turbocharger JRspec Mercedes CDI300 400KM - STAGE 3 Modified Hybrid turbocharger based on serial GTB22 for around 400 HP ( 450 HP with nitro installation) Modifications: - bigger CNC compression wheel (71mm) with 11 blade rotor - bigger GTB25 exhaust rotor - ceramic ball bearings (2nd generation) - cast iron machiningCharacteristics: - quick spool - P&P assembly - high efficiency - 3 - 3,5 bar boost (depending on the car setup)THIS IS A MODIFICATION SERVICE, WE REQUIRE SENDING US YOUR TURBINE, ESTIMATED MODIFICATION TIME UP TO 14 DAYS. It is possible to buy a ready-made turbocharger ( at the agreed price). We require sending us your turbocharger for modification. The price is valid if the delivered customer's turbine is in good condition (turbine adjuster works , undamaged housings etc.). To achieve the specified power it is necessary to make some other modifications (exhaust, intake, fuel system) ..
1,311.95€
Ex Tax:1,093.29€
Hybrid turbochargers for Porsche 911 997 Turbo (BiTurbo) - 700HP It is necessary to make mechanical modifications such as: more efficient intake, intercooler, injections, sports exhaust etc. Turbochargers specification: - Reinforced new 9 blades turbine wheel - Reinforced high performance bearings K04/K16 - Larger forged CNC compression wheel 11 or 6/6 - Machined compressor side for larger compression wheel - New reinforced DV valves with replaceable springs (optional) It is possible to prepare turbines for any stage or make other hybrid turbochargers.For any modifications it is necessary to send your own turbine to us (realization time about 10-14 days)..
3,780.24€
Ex Tax:3,150.20€
BMW-30D-GTB22-HB Hybrid turbo modification based on 218HP, 231HP and 235HP turbocharger dedicated for 330/350HP. Modification: - bigger compression wheel - exhaust rotor clipping - stronger '360' bearings Review - very quick spool - P&P montage - high performanceThe price depends on the condition of the turbocharger sent. This is a customer turbine rework service. Necessary mods (downpipe, intake, fuel system and efficient intercooler) needs to be done in order to achieve designated HP...
685.12€
Ex Tax:570.94€
BMW-30D-GTB25-HB Hybrid turbo modification based on 218HP, 231HP and 235HP turbocharger dedicated for 380/400HP. Modification: - bigger CNC compression wheell - bigger GTB2 exhaust rotor clipping - stronger '360' bearings - matched housingReview: - very quick spool - P&P montage - high performance The price depends on the condition of the turbocharger sent. This is a customer turbine rework service. Necessary mods (exhaust – downpipe, intake, fuel system and efficient intercooler) needs to be done in order to achieve designated HP...
1,004.63€
Ex Tax:837.20€
BMW-30D-GTB28-HB Hybrid turbo modification based on 218HP, 231HP and 235HP turbocharger dedicated for 400-450HP (nitro)Modification: - bigger CNC gen 2 compression whell - bigger GTB28 exhaust rotor + clipping - stronger '360' bearings - matched housingReview: - quick spool - P&P montage - high performance The price depends on the condition of the turbocharger sent. This is a customer turbine rework service. Necessary mods (exhaust, intake, fuel system) needs to be done in order to achieve designated HP...
1,368.05€
Ex Tax:1,140.04€
JRSPEC K04-64 HYBRID turbo stg. 1 Manufacturer: Hybrid Turbo SKU: JRspec-K04-64-hybrid..
1,097.56€
Ex Tax:914.63€
Regeneracja Turbosprężarki Manufacturer: jrspec SKU: regeneracja-fmic..
1,638.78€
Ex Tax:1,365.65€
2.0 TFSI IHI turbo modification service(A4, A5 B8, A6 C7) for the following powers:Stage 1 320-330hp ( ) Modification: - Full regeneration, cast iron check - bigger compression wheel, bigger CNC billet - clipped exhaust rotor Stage 3 390-410hp ( ) Modifications: - Full regeneration - bigger compression wheel bigger CNC billet - bigger exhaust rotor - cast iron machining In case of damage to the cast iron it is necessary to replace it with a new one. Cost of the new iron is about ****. In order to achieve specified power it is necessary to modify less efficient serial components (intake, cooler, fuel system, exhaust system) and flash the ECU (remap, chip-tuning) We are offering modification service of any turbine from other car models, please contact us for more details...
655.85€
Ex Tax:546.54€
K03 2.0 TSI / TFSI turbo modification service(A3 8P, Golf mk5, 6 Octavia mk2 , SuperB mk2 , Leon mk2, Passat B6 B7 ) for the following powers:Stage 1 300-320hp ( ) Modification: - Full regeneration, cast iron check - bigger compression wheel, bigger CNC billet - clipped exhaust rotorStage 3 350-360hp ( ) Modifications: - Full regeneration - bigger compression wheel bigger CNC billet - bigger exhaust rotor - cast iron machining In case of damage to the cast iron it is necessary to replace it with a new one. Cost of the new iron is about ****. In order to achieve specified power it is necessary to modify less efficient serial components (intake, cooler, fuel system, exhaust system) and flash the ECU (remap, chip-tuning) We are offering modification service of any turbine from other car models, please contact us for more details...
655.85€
Ex Tax:546.54€
Turbo Hybrydowe Audi A4 / A5 / A6 C7/ A7 / Q7 VW Amarok / - 3.0TDI - 350KM Manufacturer: Hybrid Turbo SKU: VAG-30TDI-V2..
714.39€
Ex Tax:595.33€
Hybrid turbocharger based on the Garrett GT17 (engines 120/150KM) 1.9JTD. It's characterized by a larger rotor and compression wheel. The whole is of course checked and properly milled.Turbocharger is checked and properly milled. Extending the life of the turbocharger under increased load was possible after using high- performance bearings. Turbocharger efficiency is 200-230ps. The price is valid when you send us your original turbocharger. If turbine has cracks in cast iron, it is necessary to replace it with new ones to avoid further damage, e.g. of the impeller. Cost depends on iron and turbine. Short characteristics: - High performance bearings - Fast spool / high efficiency Alfa-Romeo: 159 JTD 120/150KM Fiat: Bravo II, Grande Punto, Croma II Opel: Astra CDTI, Vectra CDTI, Insignia, Signum CDTI Saab: 9-3 120/150 KM..
629.02€
Ex Tax:524.19€
Hybrid turbocharger built based on the serial K03 / K03s (transverse engines 150 / 180ps). Turbo got larger rotor and compression wheel from the K04-064 turbocharger (minimum intake overhaul required). Turbocharger is checked and properly milled. Extending the life of the turbocharger under increased load was possible after using high-performance bearings. Turbocharger efficiency is 280-300ps when using min. exhaust manifold type "Hi-flow". The price is valid when you send us your original turbocharger. If turbine has cracks in cast iron, it is necessary to replace it with new ones to avoid further damage, e.g. of the impeller. Cost depends on iron and turbine. Short characteristics: - High performance bearings - Rotor and compression wheel K04-064 - Fast spool / high efficiency Fits to: Audi A3 Skoda Octavia mk1 Seat Ibiza, Leon mk1, Toledo mk2 VW Golf IV..
629.02€
Ex Tax:524.19€
Hybrid turbocharger built based on the serial K03 / K03s (150/163/170 / 192ps longitudinal motors). Turbo got larger rotor and compression wheel from the K04-064 turbocharger (minimum intake overhaul required). Turbocharger is checked and properly milled. Extending the life of the turbocharger under increased load was possible after using high- performance bearings. Turbocharger efficiency is 260-280ps when using min. exhaust manifold type "Hi-flow". The price is valid when you send us your original turbocharger. If turbine has cracks in cast iron, it is necessary to replace it with new ones to avoid further damage, e.g. of the impeller. Cost depends on iron and turbine. Short characteristics: - High performance bearings - Rotor and compression wheel K04-064 - Bigger rotor and light compression wheel K04-064 - Very fast spool / high efficiency Fits to: Audi A4 B5, B6, A6 C5 Skoda SuperB MK1 Seat Exeo VW Passat B5 / B5FL..
681.95€
Ex Tax:568.29€
Hybrid turbocharger built based on the serial K03 / K03s (transverse engines 150 / 180ps). Turbo got larger rotor and compression wheel from the K04-064 turbocharger (minimum intake overhaul required). Turbocharger is checked and properly milled. Extending the life of the turbocharger under increased load was possible after using high-performance bearings. Turbocharger efficiency is 24-250ps when using min. exhaust manifold type "Hi-flow". The price is valid when you send us your original turbocharger. If turbine has cracks in cast iron, it is necessary to replace it with new ones to avoid further damage, e.g. of the impeller. Cost depends on iron and turbine. Short characteristics: - Sports bearings - Bigger rotor and light compression wheel - Very fast spool / high efficiency - P&P assembly without any modifications Fits to: Audi A3 Skoda Octavia mk1 Seat Ibiza, Leon mk1, Toledo mk2 VW Golf IV..
519.27€
Ex Tax:432.72€
Hybrid turbocharger built based on the serial K03 Turbocharger is checked and properly milled. Extending the life of the turbocharger under increased load was possible after using high-performance bearings. Turbocharger efficiency is 350-360ps. The price is valid when you send us your original turbochargers. If turbines got cracks in cast iron, it is necessary to replace it with new ones to avoid further damage, e.g. of the impeller. Cost depends on irons and turbine. Short characteristics: - Sports bearings - Bigger compression wheel - Very fast spool / high efficiency - P&P assembly without any modifications Audi S4 B5 2.7BiTurbo 250/265ps Audi A6 C5 2.7BiTurbo 230/250ps..
1,182.68€
Ex Tax:985.57€
K04-300-HSPHybrid turbocharger based of the OEM K04 (engines 210/225HP).Features a larger rotor and lighter billet compression wheel and larger exhaust shaft.Sport reinforced bearings have also been used, which translates into a longer service life The efficiency of the turbocharger is 300-330ps (depending on the type of exhaust manifold),Plug & play installation without any modifications. Short characteristics: Sports bearingsLarger rotor and lightweight compression wheelVery fast spool / high efficiencyP&P assembly without any modificationsNew cast iron fits to:Audi S3 210/225Seat Leon mk1 Cupra 210/225..
763.50€
Ex Tax:636.25€
Hybrid turbocharger with 300-350HP built based on the elements of the serial turbine for Astra H, G, Opel Speedster. Fits GTC 2.0 170, 200 and OPC 240KM versions. Turbocharger equipped for larger compression wheel from the K04-064 turbocharger. The whole checked and properly flared. Extending the life of the turbocharger under increased load was possible after the use of high-performance bearings and rings. A whole finished turbo, without sending back your old turbocharger. The turbocharger has new cast iron. Short characteristics: - High performance reinforced bearings, rings - Modified turbine wheel - Fast spool / high efficiency..
910.23€
Ex Tax:758.53€
Hybrid turbocharger built on the basis of a series GT17 (transverse engines with 1.9TDI and 2.0TDI capacity and 90/100/110/115/130/140). Turbo got larger rotor and compression wheel. Turbocharger is checked and properly milled. Extending the life of the turbocharger under increased load was possible after using high-performance bearings. Turbocharger efficiency is 200-230ps. Plug & play assembly without any modifications. The price is valid when you send us your original turbocharger. If turbine has cracks in cast iron, it is necessary to replace it with new ones to avoid further damage, e.g. of the impeller. Cost depends on iron and turbine. Short characteristics: - High performance bearings - Rotor and compression wheel K04-064 - Bigger rotor and light compression wheel K04-064 - Very fast spool / high efficiency Fits to: Audi A3 8L, 8P, 8V Skoda Octavia mk1, mk2, mk3 Seat Ibiza, Leon mk1, mk2, mk3 Toledo mk1,mk2 VW Golf IV, V, VI..
629.03€
Ex Tax:524.19€
Hybrid turbocharger built on the basis of a series GT17 (transverse engines with 1.9TDI and 2.0TDI capacity and 90/100/110/115/130/140). Turbo got larger rotor and compression wheel. Turbocharger is checked and properly milled. Extending the life of the turbocharger under increased load was possible after using high-performance bearings. Turbocharger efficiency is 200-230ps. Plug & play assembly without any modifications. The price is valid when you send us your original turbocharger. If turbine has cracks in cast iron, it is necessary to replace it with new ones to avoid further damage, e.g. of the impeller. Cost depends on iron and turbine. Short characteristics: - High performance bearings - Fast spool / high efficiency Fits to: Audi A3 8L, 8P, 8V Skoda Octavia mk1, mk2, mk3 Seat Ibiza, Leon mk1, mk2, mk3 Toledo mk1,mk2 VW Golf IV, V, VI..
629.02€
Ex Tax:524.19€
Hybrid turbo modification based on 286KM turbocharger ( lift version - LCI) , Biturbo BMW 335d/535d enough to 450KM. Modifications: small turbo: - turbine wheel - 6+6 CNC - racing bearings Big turbo: - custom turbine wheel, CNC 2nd generation - racing bearings Rewiev: - very quick spool - P&P montage - high performance The price is valid if the delivered turbine is suitable for regeneration (efficient regulator, undamaged housings, manifold etc.)..
1,255.85€
Ex Tax:1,046.54€
Hybrid turbochargers built on the base of Mitsubishi series turbines.Characterized by a larger 11-blade CNC rotorThanks to reinforced bearings life of the turbocharger is extended, even under increased load. PORSCHE CAYENNE 2007-2010Stage 1 to 700HP - price 2125 euro Characteristics:Custom exhaust rotorReinforced bearingsPlug & Play installation without any modifications.Stage 2 up to 800HP - price 3000 euro Characteristic:Custom exhaust rotorReinforced bearingsReinforced actuatorsPlug&play installation without any modifications. The price is valid if the delivered turbine is suitable for regeneration (efficient regulator, undamaged housings, manifold etc.)..
2,316.83€
Ex Tax:1,930.69€