Sensors and Accessories
10 barowy czujnik ciśnienia firmy WHP (renomowanej firmy w Stanach Zjednoczonych). Są to idealne czujniki do precyzyjnego pomiaru ciśnieniu oleju, paliwa czy powietrza w zastosowaniach motoryzacyjnych. Czujniki ciśnienia WHP są idealnym towarzyszem każdego ECU. Są zbudowane zgodnie z certyfikatem ISO9001. Najnowsze osiągnięcia w technologii czujników sprawiły, iż czujniki ciśnienia WHP są niezwykle kompaktowe, ułatwiając instalację w ciasnych komorach silnika czy podwozia. Pomiar ciśnienia jest niezwykle dokładny (dokładność do 0,5%). Czujniki wykonane są w technologii CNC ze stali nierdzewnej 304. Zestaw zawiera: - 1x czujnik ciśnienia WHP 10bar, - 1x zestaw wtyczki z terminalami, Parametry: - Zakres napięć:0,5-4,5V - Zakres ciśnienia: - 0-10bar Gwint montażowy: 1/8" NPTEcumaster brand products are not shipped to the USA, Canada and Mexico...
85.85€
Ex Tax:71.54€
10 barowy czujnik ciśnienia firmy WHP (renomowanej firmy w Stanach Zjednoczonych). Są to idealne czujniki do precyzyjnego pomiaru ciśnieniu oleju, paliwa czy powietrza w zastosowaniach motoryzacyjnych. Czujniki ciśnienia WHP są idealnym towarzyszem każdego ECU. Są zbudowane zgodnie z certyfikatem ISO9001. Najnowsze osiągnięcia w technologii czujników sprawiły, iż czujniki ciśnienia WHP są niezwykle kompaktowe, ułatwiając instalację w ciasnych komorach silnika czy podwozia. Pomiar ciśnienia jest niezwykle dokładny (dokładność do 0,5%). Czujniki wykonane są w technologii CNC ze stali nierdzewnej 304. Zestaw zawiera: - 1x czujnik ciśnienia WHP 10bar, - 1x zestaw wtyczki z terminalami, Parametry: - Zakres napięć:0,5-4,5V - Zakres ciśnienia: - 0-10bar Gwint montażowy: 1/8" NPTEcumaster brand products are not shipped to the USA, Canada and Mexico...
63.17€
Ex Tax:52.64€
7 barowy czujnik ciśnienia firmy New Auto Gauge. Są to idealne czujniki do precyzyjnego pomiaru ciśnieniu oleju, paliwa czy powietrza w zastosowaniach motoryzacyjnych. Czujniki ciśnienia New Auto Gauge są idealnym towarzyszem każdego ECU. Są zbudowane zgodnie z certyfikatem ISO9001. Najnowsze osiągnięcia w technologii czujników sprawiły, iż czujniki ciśnienia New Auto Gauge są niezwykle kompaktowe, ułatwiając instalację w ciasnych komorach silnika czy podwozia. Pomiar ciśnienia jest niezwykle dokładny (dokładność do 0,5%). Czujniki wykonane są w technologii CNC ze stali nierdzewnej 304. Zestaw zawiera: - 1x czujnik ciśnienia New Auto Gauge 7bar, Parametry: - Zakres napięcia: 0,5-4,5v - Zakres ciśnienia: 0-7bar - Gwint montażowy: 1/8" NPTEcumaster brand products are not shipped to the USA, Canada and Mexico...
63.17€
Ex Tax:52.64€
Adapter that allowes to connect fuel lines with AN-6 connectors to a serial fuel rail with LT-1 connector without need to weld an additional nipple.Ecumaster brand products are not shipped to the USA, Canada and Mexico...
16.58€
Ex Tax:13.82€
Adapter that allowes to connect fuel lines with AN-8 connectors to a serial fuel rail with LT-1 connector without need to weld an additional nipple.Ecumaster brand products are not shipped to the USA, Canada and Mexico...
19.27€
Ex Tax:16.06€
The connector has been designed to be connected to the Bosch LSU 4.2 sensor. The kit includes the connector, terminals and safety seals. Ecumaster brand products are not shipped to the USA, Canada and Mexico...
6.10€
Ex Tax:5.08€
6-pin, 2-row plug for all cars from the VAG group. The kit includes plug, terminals and rubber bands. Among other things, the Bosch electronic throttle for 1.8T engines of the VAG group and the BMW group electronic throttle. The plug also fits the Bosch LSU 4.9 wideband sensor.Ecumaster brand products are not shipped to the USA, Canada and Mexico...
6.10€
Ex Tax:5.08€
The BOSCH LSU 4.2 broadband lambda sensor allows making precise measurements of the composition of the fuel-air mixture. It perfectly works with your ECUMASTER EMU, as well as commercially available AFR controllers/indicators. In our shop, you can also buy a complementary connector to the LSU 4.2 sensor.Ecumaster brand products are not shipped to the USA, Canada and Mexico...
109.51€
Ex Tax:91.26€
The BOSCH LSU 4.9 broadband lambda sensor allows making precise measurements of the composition of the fuel-air mixture. It perfectly works with your ECUMASTER EMU, as well as commercially available AFR controllers/indicators. In our shop, you can also buy a complementary connector to the LSU 4.9 sensor.Ecumaster brand products are not shipped to the USA, Canada and Mexico...
116.83€
Ex Tax:97.36€
MAC solenoid utilized to exercise precise control over the boost level. MAC solenoid valves are used by the most prominent Electronic Boost Controller (EBC) producers, such as: HKS, Greddy, Apexi, AEM, etc. The said products may be properly connected to VEMS, Mega Squirt, Ecumaster EMU, and DET. The product is characteristic mainly due to its fast pace of operation, precision, and reliability. Therefore, it is considered to be remarkably better than the traditional MBC. Technical specification: Voltage: 12V, Working frequency: 31Hz, Operating range: 10-90%, Max. pressure: 8 bar. Kit components: - MAC solenoid, - 2 stub-tubes, - spinneret Ecumaster brand products are not shipped to the USA, Canada and Mexico...
72.92€
Ex Tax:60.77€
7 barowy czujnik ciśnienia firmy WHP (renomowanej firmy w Stanach Zjednoczonych). Są to idealne czujniki do precyzyjnego pomiaru ciśnieniu oleju, paliwa czy powietrza w zastosowaniach motoryzacyjnych. Czujniki ciśnienia WHP są idealnym towarzyszem każdego ECU. Są zbudowane zgodnie z certyfikatem ISO9001. Najnowsze osiągnięcia w technologii czujników sprawiły, iż czujniki ciśnienia WHP są niezwykle kompaktowe, ułatwiając instalację w ciasnych komorach silnika czy podwozia. Pomiar ciśnienia jest niezwykle dokładny (dokładność do 0,5%). Czujniki wykonane są w technologii CNC ze stali nierdzewnej 304. Zestaw zawiera: - 1x czujnik ciśnienia WHP 7bar, - 1x zestaw wtyczki z terminalami Parametry: - Zakres napięcia: 0,5-4,5v - Zakres ciśnienia: 0-7bar - Gwint montażowy: 1/8" NPTEcumaster brand products are not shipped to the USA, Canada and Mexico...
85.85€
Ex Tax:71.54€
Ecumaster ADU connectors with terminalsEcumaster brand products are not shipped to the USA, Canada and Mexico...
50.98€
Ex Tax:42.48€
Ecumaster Battery Isolator is a motorsport master relay device designed for FIAcompliant battery isolation and engine shutdown. The device is designed for harsh motorsport environments and weighs only 83g. Featuring a full solid-state design, an absence of mechanical components ensures long life and high reliability. The device has built-in alternator load dump protection without the addition of any external components. There is no risk of damage to expensive electronic equipment during emergency shutdown. The isolator is controlled with two external switches and can be shut down with a CAN-bus message. The message may be sent from an Ecumaster PMU16 unit in the case of impact or another event. The device is configurable through CANbus. It also sends diagnostic information which can be used by other equipment and is valuable during device setup and diagnosis. It is fully protected against overheating and over-current. Device status is indicated with a multi-color led light. Key features •Weight: 83g •Dimensions: 50mm x 100mm x 38.5mm •Voltage range: 6V - 19V, 28V transient (12V automotive installations only) •Operating temperature range: -40C + 125C •Current capability: 300A continuous, peak up to 1000A •Current measurement resolution 4A •Current measurement range: -1000A to 1000A •Current measurement accuracy: ±10% •Inductive load switching capability: 600mJ •Enclosure: Anodized aluminium, IP67 rated • High current terminals: M8 nickel plated terminals or Radlok connectors •Signal connector: Deutsch ASX202-06PN (mating plug ASX602-06SN included) •Power save state current consumption:..
429.27€
Ex Tax:357.72€
Ecumaster Battery Isolator is a motorsport master relay device designed for FIAcompliant battery isolation and engine shutdown. The device is designed for harsh motorsport environments and weighs only 83g. Featuring a full solid-state design, an absence of mechanical components ensures long life and high reliability. The device has built-in alternator load dump protection without the addition of any external components. There is no risk of damage to expensive electronic equipment during emergency shutdown. The isolator is controlled with two external switches and can be shut down with a CAN-bus message. The message may be sent from an Ecumaster PMU16 unit in the case of impact or another event. The device is configurable through CANbus. It also sends diagnostic information which can be used by other equipment and is valuable during device setup and diagnosis. It is fully protected against overheating and over-current. Device status is indicated with a multi-color led light. Key features •Weight: 83g •Dimensions: 50mm x 100mm x 38.5mm •Voltage range: 6V - 19V, 28V transient (12V automotive installations only) •Operating temperature range: -40C + 125C •Current capability: 300A continuous, peak up to 1000A •Current measurement resolution 4A •Current measurement range: -1000A to 1000A •Current measurement accuracy: ±10% •Inductive load switching capability: 600mJ •Enclosure: Anodized aluminium, IP67 rated • High current terminals: M8 nickel plated terminals or Radlok connectors •Signal connector: Deutsch ASX202-06PN (mating plug ASX602-06SN included) •Power save state current consumption:..
398.53€
Ex Tax:332.11€
BATTERY ISOLATOR Ecumaster Battery Isolator is a motorsport master relay devicedesigned for FIAcompliant battery isolation and engine shutdown.The device is designed for harsh motorsport environments and weighsonly 83g. Featuring a full solid-state design, an absence of mechanicalcomponents ensures long life and high reliability.The device has built-in alternator load dump protection without theaddition of any external components.There is no risk of damage to expensive electronic equipment duringemergency shutdown. The isolator is controlled with two externalswitches and can be shut down with a CAN-bus message.The message may be sent from an Ecumaster PMU16 unit in the caseof impact or another event. The device is configurable through CANbus.It also sends diagnostic information which can be used by otherequipment and is valuable during device setup and diagnosis. It is fullyprotected against overheating and over-current.Device status is indicated with a multi-color led light. Key features •Weight: 83g•Dimensions: 50mm x 100mm x 38.5mm•Voltage range: 6V – 19V, 28V transient(12V automotive installations only)•Operating temperature range: -40C + 125C•Current capability: 300A continuous, peak up to 1000A•Current measurement resolution 4A•Current measurement range: -1000A to 1000A•Current measurement accuracy: ±10%•Inductive load switching capability: 600mJ•Enclosure: Anodized aluminium, IP67 rated• High current terminals: M8 nickel plated terminalsor Radlok connectors•Signal connector: Deutsch ASX202-06PN(mating plug ASX602-06SN included)•Power save state current consumption:..
331.71€
Ex Tax:276.42€
For: Ecumaster Emu, Emu Black Bluetooth module allows to transmit ECUMASTER log data via Bluetooth communication. It allows to trace all important engine parameters in real-time using Android compatible devices. Features: Free application available in Google Play store Serial or CAN version available Logged channels: RPM, MAP, TPS, IAT, AFR, CLT, LAMBDA, BATTERY VOLTAGE, IGNITION ANGLE, INJECTORS PW, SEC. INJECTORS PW, INJECTORS DC, EGT #1 and #2, KNOCK LEVEL, DWELL TIME, CURRENT GEAR, BARO PRESSURE, ANALOG #1,#2,#3,#4, ECU TEMPERATURE, OIL PRESSURE, OIL TEMPERATURE, FUEL PRESSURE, ETHANOL CONTENT, FUEL TEMPERATURE, VEHICLE SPEED, FUEL PRESSURE DELTA,FUEL LEVEL, TABLES SET ,CHECK ENGINE CODE Ecumaster brand products are not shipped to the USA, Canada and Mexico...
74.15€
Ex Tax:61.79€
A wireless communication module connected to the expansion port of the ECUMASTER EMU computer. It allows communicating with mobile phones and tablets operating under the Android operating system. Thanks to the use of the BlueTooth Module and the AIM communication protocol, the real-time monitoring of basic engine work parameters is possible.Ecumaster brand products are not shipped to the USA, Canada and Mexico...
58.04€
Ex Tax:48.37€
We offer CAN bus based keyboard with different key patterns. Designed for the harshest conditions, the keyboards are immune to water, mud, soil, chemicals, etc. Thanks to a unique system of removable key inserts, it is easy to make keypad layout. Custom inserts can be made. Thanks to built in LED the button state could be indicated (GREEN, ORANGE,RED,BLUE,CYAN,VIOLET,WHITE). The behavior of the individual keys can be defined in EMU BLACK or PMU client software. Key Features •CAN bus compatible keyboard •RGB buttons backlight •125kbps, 250kbps, 500kbps, 1000kbps CAN bus speed supported •works with EMU BLACK (1 keyboard) and PMU devices (up to 2 keyboards) •fully customizable •IP 67 rated Keybord without inserts. Available separetelly!Ecumaster brand products are not shipped to the USA, Canada and Mexico...
324.38€
Ex Tax:270.32€
We offer CAN bus based keyboard with different key patterns. Designed for the harshest conditions, the keyboards are immune to water, mud, soil, chemicals, etc. Thanks to a unique system of removable key inserts, it is easy to make keypad layout. Custom inserts can be made. Thanks to built in LED the button state could be indicated (GREEN, ORANGE,RED,BLUE,CYAN,VIOLET,WHITE). The behavior of the individual keys can be defined in EMU BLACK or PMU client software. Key Features •CAN bus compatible keyboard •RGB buttons backlight •125kbps, 250kbps, 500kbps, 1000kbps CAN bus speed supported •works with EMU BLACK (1 keyboard) and PMU devices (up to 2 keyboards) •fully customizable •IP 67 rated Keybord without inserts. Available separetelly!Ecumaster brand products are not shipped to the USA, Canada and Mexico...
212.68€
Ex Tax:177.24€
We offer CAN bus based keyboard with different key patterns. Designed for the harshest conditions, the keyboards are immune to water, mud, soil, chemicals, etc. Thanks to a unique system of removable key inserts, it is easy to make keypad layout. Custom inserts can be made. Thanks to built in LED the button state could be indicated (GREEN, ORANGE,RED,BLUE,CYAN,VIOLET,WHITE). The behavior of the individual keys can be defined in EMU BLACK or PMU client software. Key Features •CAN bus compatible keyboard •RGB buttons backlight •125kbps, 250kbps, 500kbps, 1000kbps CAN bus speed supported •works with EMU BLACK (1 keyboard) and PMU devices (up to 2 keyboards) •fully customizable •IP 67 rated Keybord without inserts. Available separetelly!Ecumaster brand products are not shipped to the USA, Canada and Mexico...
269.75€
Ex Tax:224.79€
We offer CAN bus based keyboard with different key patterns. Designed for the harshest conditions, the keyboards are immune to water, mud, soil, chemicals, etc. Thanks to a unique system of removable key inserts, it is easy to make keypad layout. Custom inserts can be made. Thanks to built in LED the button state could be indicated (GREEN, ORANGE,RED,BLUE,CYAN,VIOLET,WHITE). The behavior of the individual keys can be defined in EMU BLACK or PMU client software. Key Features •CAN bus compatible keyboard •RGB buttons backlight •125kbps, 250kbps, 500kbps, 1000kbps CAN bus speed supported •works with EMU BLACK (1 keyboard) and PMU devices (up to 2 keyboards) •fully customizable •IP 67 rated Keybord without inserts. Available separetelly!Ecumaster brand products are not shipped to the USA, Canada and Mexico...
282.92€
Ex Tax:235.76€
The DBW module is used to control the electronic throttle with the EMU device. An additional module has the executive function (H-Bridge + processor). The DBW module has been divided into two microprocessor devices which has many advantages, i.e. the parameters are defined in the EMU (this can be easily integrated with software) and the devices monitor each other. If there is a failure of the EMU device or the driver, an action can be undertaken to ensure safety (in the first case, the DBW module will shut it down, in the second the EMU will cut off the speed). The complete set includes the module with the connector and the plug. NOTE: Functions that are associated with operation of the electronic throttle are used for stationary tests only (generators, engine test benches). For safety reasons, do not use the service the electronic throttle on the road!!!Ecumaster brand products are not shipped to the USA, Canada and Mexico...
101.94€
Ex Tax:84.95€
Harness incorporating 20 FLRY electric cables (used in the automotive industry) of the length of 30 cm, with terminals designed for the DET3 plugs. The product facilitates device installation, as well as decreases the risk of improper device connection, especially due to the fact that each of the cables has a different color.Ecumaster brand products are not shipped to the USA, Canada and Mexico...
7.80€
Ex Tax:6.50€
Ecumaster DET3 connectors with terminals Manufacturer: ECUMASTER SKU: WT06005Ecumaster brand products are not shipped to the USA, Canada and Mexico...
7.80€
Ex Tax:6.50€
Ecumaster Emu Black connectors with terminals Manufacturer: ECUMASTER SKU: WT06021Ecumaster brand products are not shipped to the USA, Canada and Mexico...
19.51€
Ex Tax:16.26€
A universal cable harness that greatly simplifies the installation of the device. It consists of FLRY ducts intended for use in the automotive industry. In addition, at the end of each wire there is a terminal for EMU plugs. The beam consists of 61 wires with a length of 2.5 m each, including: 34 wires with a cross-section of 0.5mm2, 17 wires with a 0.75mm2 cross-section, 6 wires with a cross-section of 1mm2 (including 6 LGY cables designed for ignition coils), 4 wires with a cross-section of 1.5mm2.Ecumaster brand products are not shipped to the USA, Canada and Mexico...
84.88€
Ex Tax:70.73€
Ecumaster Emu Classic connectors with terminalsEcumaster brand products are not shipped to the USA, Canada and Mexico...
14.63€
Ex Tax:12.20€
Ecumaster EMU Classic ecu bracket (black) Mounting bracket for Ecumaster EMU Classic computer. Features: Made in CNC technology with aluminum Lightweight and solid aluminum - 150gr Painted with a black powder coating technique 2 mounting points (screws)Ecumaster brand products are not shipped to the USA, Canada and Mexico...
28.29€
Ex Tax:23.58€
A universal cable harness which makes assembly of the device much easier. It includes FLRY cables for use in the automotive industry. In addition, there is an EMU plug terminal at the end of each wire. The bundle consists of 43 wires 2.5m long each, including: - 19 wires with 0.5mm2 cross section, - 12 wires with 0.75mm2 cross section, - 9 wires with 1mm2 cross section (including 6 LGY wires for ignition coils) ) and 3 wires with a cross-section of 1.5mm2. P>Ecumaster brand products are not shipped to the USA, Canada and Mexico...
70.24€
Ex Tax:58.54€
Ecumaster Lambda to CAN controller is a compact device used to control a Bosch LSU 4.9 wideband oxygen sensor and transmit the lambda reading via CAN-BUS. Two programmable 0-5V analog signal lines are available, along with the CAN transmission. The controller uses a dedicated Bosch integrated circuit paired with an automotive grade digital controller to precisely manage the oxygen sensor and calculate Lambda and AFR. Multiple controllers may be used at the same time on one CAN–BUS, lending installation flexibility. Key Features •Bosch LSU 4.9 support (ADV version also available) •Operating voltage range: 9 -16V •Current consumption: up to 3A (during warm up) •IP65 enclosure •2 programmable analog outputs 0-5V •Communication and setup: CAN 2.0A/B Ecumaster brand products are not shipped to the USA, Canada and Mexico...
204.88€
Ex Tax:170.73€
An exhaust gas temperature sensor (EGT, K-type thermocouple) that cooperates with the ECUMASTER EMU computer. Unlike Chinese sensors, the design of our sensor ensures a quick response to the changing temperature and high resistance to high temperature (INCONEL armour). The sensor diameter is 3 mm, the length of the cable in a metal braid is 2 meters.Ecumaster brand products are not shipped to the USA, Canada and Mexico...
54.63€
Ex Tax:45.53€
An exhaust gas temperature sensor (EGT, K-type thermocouple) that cooperates with the ECUMASTER EMU computer. Unlike Chinese sensors, the design of our sensor ensures a quick response to the changing temperature and high resistance to high temperature (INCONEL armour). The sensor diameter is 3 mm, the length of the cable in a metal braid is 2 meters. The set includes a mounting bushing with an M10x1 thread.Ecumaster brand products are not shipped to the USA, Canada and Mexico...
64.63€
Ex Tax:53.86€
A mounting bushing with an M10x1 thread for exhaust gas temperature sensors (EGT).Ecumaster brand products are not shipped to the USA, Canada and Mexico...
10.24€
Ex Tax:8.54€
Stud fittings set with MAC solenoid valve for precise boost controlling. Air filter, thread size 1/8 NPT stud fitting, 6mm, thread size 1/8 NPTEcumaster brand products are not shipped to the USA, Canada and Mexico...
4.88€
Ex Tax:4.06€
The Flex Fuel sensor measures ethanol content in fuel. This information can be used by the EMU driver to correct such parameters as fuel dose, spark advance or boost pressure. In addition, the sensor measures the temperature of flowing fuel. The set includes the sensor with a plug and terminals. Required for all users of E85 fuel...
146.10€
Ex Tax:121.75€
The intake air temperature sensor (IAT) is perfectly suited to work with ECUMASTER EMU. The sensor has an M12x1.5 thread. In the ECUMASTER EMU configuration, select the BOSCH NTC M12-L 0280130039 as a sensor.Ecumaster brand products are not shipped to the USA, Canada and Mexico...
14.39€
Ex Tax:11.99€
Knock sensor is one of a number of important sensors that provide the necessary information to the engine management system. The original Bosch sensor under EV1 connector.Ecumaster brand products are not shipped to the USA, Canada and Mexico...
33.90€
Ex Tax:28.25€
Lambda probe moounting bush for Bosch LSU 4.2 and 4.9Ecumaster brand products are not shipped to the USA, Canada and Mexico...
6.10€
Ex Tax:5.08€
Long mounting bush for ECU Master EGT sensorEcumaster brand products are not shipped to the USA, Canada and Mexico...
9.76€
Ex Tax:8.13€
2.5 bar map sensor with the operation range between -1 and 1.5 bar. The sensor is exceptionally vital for proper mechanical tuning of a vehicle, especially while taking advantage of the EcuMaster device.Ecumaster brand products are not shipped to the USA, Canada and Mexico...
32.20€
Ex Tax:26.83€
Nuke Performance Full Flow Flex Fuel Sensor Adapter. Bypass design lets you use an ethanol content sensor without flow loss. With the Nuke Performance bypass Full Flow Flex Fuel Sensor Adapter, you can mount your ethanol content sensor on both the pressure and return fuel line in your fuel system. A sensor is not included with delivery. Fits most common GM flex-fuel sensors Bypass design exceeds AN-10 fuel line capacity AN-10 ORB inlet/outlet for maximum fuel flow Works on both pressure and return fuel lines Lightweight design, with an integrated bracket 4 x Viton O-rings for long-term durability When running alcoholic fuels such as E85, an ethanol content sensor is used to measure fuel at all times in order to maintain the accuracy and performance of the ECU. The most commonly used sensors have a very small flow capacity which doesn´t support a high-performing fuel setup. With this sensor adapter, you can put the sensor on both the pressure and return side with close to no flow loss, thanks to its bypass design which surpasses the capability of a dash 10 fuel line. Fits all of the most common OEM ethanol content sensors for your aftermarket fuel system. Designed to work with the most common flex-fuel sensors on the market from OEM manufacturer GM (Continental), this adapter works with 13577379, 13577429, SE1003, 13577394, and other sensors of the same design. Many of the standalone ECU manufacturers, such as Haltec, Cobb Tuning, Fuel Tech USA, ECU Master, AEM, Link, and MaxxECU, sell sensors with their own branding. However, these normally have the same specifications as the OEM parts and work with the Nuke Performance sensor adaptor as long as they use 9.49 (5/16") connections. Designed with a bypass design that exceeds an AN10 fuel line capacity, oversized components give you headroom where you need it. The oversized internal bypass fuel line integrated within the Nuke Performance Full Flow Flex Fuel Sensor Adapter exceeds a AN-10 fuel line capacity. The oversized internal gives you headroom where you need it and makes it possible to mount the sensor on either the pressure or return side of your fuel system. Which flex fuel sensor can be used with the Nuke Performance bypass ethanol content sensor adapter? The Nuke Performance split-flow sensor adapter has been developed to be used together with all the commonly used flex fuel content sensors such as Continental (GM) 13577429, 2022400116, 13577379, SE1003, and even the 13577394, which needs to be modified to a width of 95mm (3.75"). GM 13577429 flex fuel sensor GM 13577379 flex fuel sensor GM13577394 flex fuel sensor The full flow flex fuel sensor adapter is delivered without the needed flex fuel sensor. GM Flex Fuel Sensor 13577429 Part # : 70-13577429 GM Flex Fuel Sensor 13577379 Part # : 70-13577379 Delivered with a lightweight bracket for an easy mounting solution for the GM 13577429 flex fuel sensor. One of the most common ethanol content sensors, the GM 13577429, lacks mounting points as stock. With the Nuke Performance Full Flow Flex Fuel Sensor Adapter, you will both receive all the benefits of a split-flow design while integrated brackets provide a safe and durable installation, particularly helpful alongside the often demanding conditions within motorsports. For the GM 13577379 and 13577394, which have their own mountings holes, you do not need to use the provided mounting bracket. Developed and designed for both enthusiasts and professional motorsport athletes by Nuke Performance in Sweden. The Nuke Performance full flow flex fuel sensor adapter, AN-10 is developed and designed in-house by Nuke Performance in Sweden for the highest possible quality with the same hallmark as all the other parts in our lightweight motorsports range. There is no substitute for the quality of Nuke Performance! Full Flow Flex Fuel Sensor Adapter, AN-10 Specifications: For more information about specifications, contact us directly. Fits sensors SE1003, 13577379, 13577429, 13577394* Inlet thread AN-10 ORB, view assortment here Outlet thread AN-10 ORB, view assortment here Bypass design YES, total internals exceeds AN-10 fuel line Fuel compatibility Gasoline, Petrol, Methanol, Ethanol Integrated bracket YES, removable when not needed Height 44.2mm (1.74") / 56.2mm (2.21") ** Width 137mm (5.39") Depth 32mm (1.26") / 42.5mm (1.67") ** Bracket CC 48mm (1.89") Weight 240g (8.46oz) Sensor connection SAE 9.49 (5/16") Sensor max width 95mm (3.75") * Sensor 13577394 needs modification before application ** First measurement is without the bracket, second measurement is with the bracket Nuke Performance Full Flow Flex Fuel Sensor Adapter Includes: 1 x Full Flow Flex Fuel Sensor Adapter 1 x Lightweight bracket, removable when not needed 1 x Safety leaflet Der Full Flow Flex Fuel Sensor Adapter wird ohne den benötigten Flex Fuel Sensor geliefert. GM Flex Fuel Sensor 13577429 Teilenummer: 70-13577429 GM Flex Fuel Sensor 13577379 Teilenummer: 70-13577379 Wird mit einer leichten Halterung für eine einfache Montagelösung für den flexiblen Kraftstoffsensor GM 13577429 geliefert. Einem der gebräuchlichsten Sensoren für den Ethanolgehalt, dem GM 13577429, fehlen standardmäßig Befestigungspunkte. Mit dem Nuke Performance Full Flow Flex Fuel Sensor Adapter erhalten Sie beide alle Vorteile eines Split-Flow-Designs, während integrierte Halterungen eine sichere und dauerhafte Installation bieten, was besonders hilfreich neben den oft anspruchsvollen Bedingungen im Motorsport ist. Für die GM 13577379 und 13577394, die über eigene Befestigungslöcher verfügen, müssen Sie den mitgelieferten Befestigungswinkel nicht verwenden. Entwickelt und entworfen für Enthusiasten und professionelle Motorsportler von Nuke Performance in Schweden. Der Nuke Performance Full-Flow-Flex-Kraftstoffsensor-Adapter, AN-10, wurde von Nuke Performance in Schweden im eigenen Haus entwickelt und konstruiert, um die höchstmögliche Qualität mit dem gleichen Markenzeichen wie alle anderen Teile in unserem Leichtbau-Motorsportsortiment zu erzielen. Es gibt keinen Ersatz für die Qualität von Nuke Performance! Full Flow Flex Fuel Sensor Adapter, AN-10 Spezifikationen: Für weitere Informationen zu den Spezifikationen wenden Sie sich direkt an uns. Passend für Sensoren SE1003, 13577379, 13577429, 13577394* Einlassgewinde AN-10 ORB, Sortiment hier ansehen Ausgangsgewinde AN-10 ORB, Sortiment hier ansehen Bypass-Design JA, die gesamten Einbauten übersteigen die AN-10-Kraftstoffleitung Kraftstoffkompatibilität Benzin, Benzin, Methanol, Ethanol Integrierte Halterung JA, abnehmbar, wenn nicht benötigt Höhe 44,2 mm (1,74 Zoll) / 56,2 mm (2,21 Zoll) ** Breite 137 mm (5,39") Tiefe 32 mm (1,26 Zoll) / 42,5 mm (1,67 Zoll) ** Halterung CC 48mm (1,89") Gewicht 240 g (8,46 Unzen) Sensoranschluss SAE 9.49 (5/16") Max. Breite des Sensors 95 mm (3,75 Zoll) * Sensor 13577394 muss vor der Anwendung modifiziert werden ** Erste Messung ohne Bügel, zweite Messung mit Bügel Nuke Performance Full Flow Flex-Kraftstoffsensor-Adapter enthält: 1 x Full-Flow-Flex-Kraftstoffsensor-Adapter 1 x Leichte Halterung, abnehmbar, wenn nicht benötigt 1 x Sicherheitsbroschüre..
198.00€
Ex Tax:165.00€
Oil temperature sensor suited to work with ECUMASTER EMU. Sensor has a 1/8 "NPT thread. Includes plug with terminals, sealants and resistor.Ecumaster brand products are not shipped to the USA, Canada and Mexico...
24.39€
Ex Tax:20.33€
Lambda probe cover, plug, screw, M18 x 1.5 threadEnd cap made of 304 grade stainless steelEcumaster brand products are not shipped to the USA, Canada and Mexico...
3.66€
Ex Tax:3.05€
SAE J2044 7.89 (5/16") to AN-6 Male fitting Nuke Performance High flow SAE J2044 to AN Male fittings, with plastic inserts and Viton o-rings, safe for all types of fuels such as ethanol and petrol. Connects to OEM male 5/16 and 3/8 SAE quick connect fuel fittings. These adapters are often used to convert an OEM fuel system, that is using SAE 5/16 (7.89mm), SAE 3/8 (9.49mm) quick connect fittings. Converts fittings into AN-6 / AN-8 Male fittings to use AN fuel lines in your aftermarket fuel system. The plastic inserts are sold as spare parts to be replaced if needed. Available in different versions and sizes: SAE J2044 Ø7.89 5/16" to AN-6 Male fitting Part #: 150-20-401 SAE J2044 Ø9.49 3/8" to AN-6 Male fitting Part #: 150-20-402 SAE J2044 Ø9.49 3/8" to AN-8 Male fitting Part #: 150-20-403 Used on Nuke Performance products: SAE fuel lines, adapters, fittings Fuel pump mounting kits If you wish to change or complement the use of fittings of the highest quality, we recommend that you use our fittings which are designed to withstand high power and excessive wear and in the right combination with the products they were intended for. Available in several sizes, make sure to choose the preferred size when placing an order...
21.00€
Ex Tax:17.50€
SAE J2044 9.49 3/8" to AN-6 Male fitting Nuke Performance High flow SAE J2044 to AN Male fittings, with plastic inserts and Viton o-rings, safe for all types of fuels such as ethanol and petrol. Connects to OEM male 5/16 and 3/8 SAE quick connect fuel fittings. These adapters are often used to convert an OEM fuel system, that is using SAE 5/16 (7.89mm), SAE 3/8 (9.49mm) quick connect fittings. Converts fittings into AN-6 / AN-8 Male fittings to use AN fuel lines in your aftermarket fuel system. The plastic inserts are sold as spare parts to be replaced if needed. Available in different versions and sizes: SAE J2044 Ø7.89 5/16" to AN-6 Male fitting Part #: 150-20-401 SAE J2044 Ø9.49 3/8" to AN-6 Male fitting Part #: 150-20-402 SAE J2044 Ø9.49 3/8" to AN-8 Male fitting Part #: 150-20-403 Used on Nuke Performance products: SAE fuel lines, adapters, fittings Fuel pump mounting kits If you wish to change or complement the use of fittings of the highest quality, we recommend that you use our fittings which are designed to withstand high power and excessive wear and in the right combination with the products they were intended for. Available in several sizes, make sure to choose the preferred size when placing an order...
21.00€
Ex Tax:17.50€
SAE J2044 9.49 3/8" to AN-8 Male fitting Nuke Performance High flow SAE J2044 to AN Male fittings, with plastic inserts and Viton o-rings, safe for all types of fuels such as ethanol and petrol. Connects to OEM male 5/16 and 3/8 SAE quick connect fuel fittings. These adapters are often used to convert an OEM fuel system, that is using SAE 5/16 (7.89mm), SAE 3/8 (9.49mm) quick connect fittings. Converts fittings into AN-6 / AN-8 Male fittings to use AN fuel lines in your aftermarket fuel system. The plastic inserts are sold as spare parts to be replaced if needed. Available in different versions and sizes: SAE J2044 Ø7.89 5/16" to AN-6 Male fitting Part #: 150-20-401 SAE J2044 Ø9.49 3/8" to AN-6 Male fitting Part #: 150-20-402 SAE J2044 Ø9.49 3/8" to AN-8 Male fitting Part #: 150-20-403 Used on Nuke Performance products: SAE fuel lines, adapters, fittings Fuel pump mounting kits If you wish to change or complement the use of fittings of the highest quality, we recommend that you use our fittings which are designed to withstand high power and excessive wear and in the right combination with the products they were intended for. Available in several sizes, make sure to choose the preferred size when placing an order...
21.00€
Ex Tax:17.50€
Short mounting bush for EGT sensorEcumaster brand products are not shipped to the USA, Canada and Mexico...
8.54€
Ex Tax:7.11€
Flex fuel sensors measure ethanol content. They can be used in the FPR return line. But for improved accuracy and faster response times, the sensor should be plumbed upstream of the fuel injectors in the feed line. In this case, expect to see up to a ~10psi pressure drop if multiple pumps are used with a high-powered engine. As shown above, the Radium Engineering adapter splits the fuel flow into an auxiliary passage parallel to the sensor. Because the flex fuel sensor is directly inline with the fuel flow path, it will read the incoming ethanol content at high and low engine demands. Traditionally this additional flow path could be accomplished with hose and y-adapter fittings. However, the Radium Split-Flow Flex Fuel Sensor Adapter is less complicated, considerably compact, and provides a mounting solution for the popular GM 13577429 flex fuel sensor (shown below). Two M6x1.0mm socket head bolts are provided for mounting. Additionally, the position of the sensor can be rotated at any given time even when mounted and plumbed. This is great for proper spacing with surrounding components. Unique 10AN ORB end port adapter fittings can be purchased 1. GM P/N: 13577429 NOTE: This sensor is the same found in AEM 30-2200 / 30-2201, ECU Master WHP, MaxxECU 1282, Fuel Tech 5005100353 / 5011100354, and Cobb Tuning kits. Compatible with included mount (shown below). 2. GM P/N: 13577379 This sensor already has 3 useable mounting holes. The provided mount cannot be used. 3. GM P/N: 13577394 NOTE: This sensor is the same found in the Haltech HT-011000 kit This sensor already has 3 useable mounting holes. The provided mount cannot be used. For assembly, this sensor (shown above) requires a minor modification described in the instructions. FEATURES -4pc billet 6061 aluminum construction -Black anodized and laser engraved -10AN (5/8") equivalent flow rate -Can be used on fuel feed or return line -8 double FKM O-rings (primary and backup) -Stainless steel metric hardware Instruction PDFEcumaster brand products are not shipped to the USA, Canada and Mexico...
116.10€
Ex Tax:96.75€