Wraps
Black Glass Fiber Exhaust Wrap 2.5cm x 15m (1" x 50ft) DEI 010107 USA-DEI-10107 An important first step in reducing unwanted and power-robbing under hood heat is wrapping headers and down pipes. Less under hood radiant heat results in a cooler air charge for improved performance and keeping exhaust gases hotter within the exhaust system helps in decreasing exhaust density & increases exhaust flow. Design Engineering Stainless Steel Locking Ties are the perfect way to fasten exhaust wrap for a easy, clean and professional installation. Reduce under hood temperatures a realistic 50% Decreases exhaust density & increases exhaust flow Improves horsepower Withstands 1200°F direct/2000°F radiant Only exhaust wrap with installation guide lines Added durability and heat retention NOTE: Design Engineering HT Silicone Coating spray is highly recommended for DEI glass fiber wrap to penetrate, seal, protect and prolong the lifespan of exhaust wrap. NOTE: Wrapping of the catalytic converter is not recommended, as overheating can lead to reduced lifetime of the converter. Instead, try our Corvette Catalytic Converter Shield or create your own shield using our Floor & Tunnel Shield II™. Note of Caution: Wrap is not designed to be moved or removed after it has been heat cycled. After the fibers have been heated, they lose their initial flexibility. This does not reduce the thermal properties of the exhaust wrap. Be aware of this before you decide to remove the wrap. For this reason, you should avoid wrapping any flex-pipes or flex-joints. Note about Titanium Exhaust Systems: DEI does NOT recommend wrapping exhausts made of titanium. The alloys used in the production of titanium exhaust systems tend to be thin and are designed to dissipate heat quickly. Wrapping any titanium exhaust pipe, regardless of brand, can hold in too much heat, and make the titanium alloy turn brittle and prone to premature cracking. If you are seeking to reduce the heat on a titanium exhaust system, DEI recommends using alternatives such as our flexible heat shields. Direct Heat Resistance: 1200°F Radiant Heat Resistance: 2000°F..
43.90€
Ex Tax:36.59€
Black Glass Fiber Exhaust Wrap 2.5cm x 30m (1" x 100ft) DEI 010118 USA-DEI-10118 An important first step in reducing unwanted and power-robbing under hood heat is wrapping headers and down pipes. Less under hood radiant heat results in a cooler air charge for improved performance and keeping exhaust gases hotter within the exhaust system helps in decreasing exhaust density & increases exhaust flow. Design Engineering Stainless Steel Locking Ties are the perfect way to fasten exhaust wrap for a easy, clean and professional installation. Reduce under hood temperatures a realistic 50% Decreases exhaust density & increases exhaust flow Improves horsepower Withstands 1200°F direct/2000°F radiant Only exhaust wrap with installation guide lines Added durability and heat retention NOTE: Design Engineering HT Silicone Coating spray is highly recommended for DEI glass fiber wrap to penetrate, seal, protect and prolong the lifespan of exhaust wrap. NOTE: Wrapping of the catalytic converter is not recommended, as overheating can lead to reduced lifetime of the converter. Instead, try our Corvette Catalytic Converter Shield or create your own shield using our Floor & Tunnel Shield II™. Note of Caution: Wrap is not designed to be moved or removed after it has been heat cycled. After the fibers have been heated, they lose their initial flexibility. This does not reduce the thermal properties of the exhaust wrap. Be aware of this before you decide to remove the wrap. For this reason, you should avoid wrapping any flex-pipes or flex-joints. Note about Titanium Exhaust Systems: DEI does NOT recommend wrapping exhausts made of titanium. The alloys used in the production of titanium exhaust systems tend to be thin and are designed to dissipate heat quickly. Wrapping any titanium exhaust pipe, regardless of brand, can hold in too much heat, and make the titanium alloy turn brittle and prone to premature cracking. If you are seeking to reduce the heat on a titanium exhaust system, DEI recommends using alternatives such as our flexible heat shields. Direct Heat Resistance: 1200°F Radiant Heat Resistance: 2000°F..
96.59€
Ex Tax:80.49€
Black Glass Fiber Exhaust Wrap 5cm x 15m (2" x 50ft) DEI 010108 USA-DEI-10108 An important first step in reducing unwanted and power-robbing under hood heat is wrapping headers and down pipes. Less under hood radiant heat results in a cooler air charge for improved performance and keeping exhaust gases hotter within the exhaust system helps in decreasing exhaust density & increases exhaust flow. Design Engineering Stainless Steel Locking Ties are the perfect way to fasten exhaust wrap for a easy, clean and professional installation. Reduce under hood temperatures a realistic 50% Decreases exhaust density & increases exhaust flow Improves horsepower Withstands 1200°F direct/2000°F radiant Only exhaust wrap with installation guide lines Added durability and heat retention NOTE: Design Engineering HT Silicone Coating spray is highly recommended for DEI glass fiber wrap to penetrate, seal, protect and prolong the lifespan of exhaust wrap. NOTE: Wrapping of the catalytic converter is not recommended, as overheating can lead to reduced lifetime of the converter. Instead, try our Corvette Catalytic Converter Shield or create your own shield using our Floor & Tunnel Shield II™. Note of Caution: Wrap is not designed to be moved or removed after it has been heat cycled. After the fibers have been heated, they lose their initial flexibility. This does not reduce the thermal properties of the exhaust wrap. Be aware of this before you decide to remove the wrap. For this reason, you should avoid wrapping any flex-pipes or flex-joints. Note about Titanium Exhaust Systems: DEI does NOT recommend wrapping exhausts made of titanium. The alloys used in the production of titanium exhaust systems tend to be thin and are designed to dissipate heat quickly. Wrapping any titanium exhaust pipe, regardless of brand, can hold in too much heat, and make the titanium alloy turn brittle and prone to premature cracking. If you are seeking to reduce the heat on a titanium exhaust system, DEI recommends using alternatives such as our flexible heat shields. Direct Heat Resistance: 1200°F Radiant Heat Resistance: 2000°F..
77.07€
Ex Tax:64.23€
Black Glass Fiber Exhaust Wrap 8in x 100ft (20cm x 30.5m) DEI 010085 USA-DEI-10085 Wrapping headers and down pipes is an important first step in reducing unwanted and power-robbing under hood heat. Less under hood heat results in a cooler air charge for improved performance and keeping exhaust gases hotter within the exhaust system helps in decreasing exhaust density & increases exhaust flow. Design Engineering Stainless Steel Locking Ties are the perfect way to fasten exhaust wrap for a easy, clean and professional installation. Reduce under hood temperatures a realistic 50% Decreases exhaust density & increases exhaust flow Improves horsepower Withstands 1200°F direct/2000°F radiant Only exhaust wrap with installation guide lines Added durability and heat retention NOTE: Design Engineering HT Silicone Coating spray is highly recommended for DEI glass fiber wrap to penetrate, seal, protect and prolong the lifespan of exhaust wrap. NOTE: Wrapping of the catalytic converter is not recommended, as overheating can lead to reduced lifetime of the converter. Instead, try our Corvette Catalytic Converter Shield or create your own shield using our Floor & Tunnel Shield II™. Note of Caution: Wrap is not designed to be moved or removed after it has been heat cycled. After the fibers have been heated, they lose their initial flexibility. This does not reduce the thermal properties of the exhaust wrap. Be aware of this before you decide to remove the wrap. For this reason, you should avoid wrapping any flex-pipes or flex-joints. Note about Titanium Exhaust Systems: DEI does NOT recommend wrapping exhausts made of titanium. The alloys used in the production of titanium exhaust systems tend to be thin and are designed to dissipate heat quickly. Wrapping any titanium exhaust pipe, regardless of brand, can hold in too much heat, and make the titanium alloy turn brittle and prone to premature cracking. If you are seeking to reduce the heat on a titanium exhaust system, DEI recommends using alternatives such as our flexible heat shields. Direct Heat Resistance: 1200°F Radiant Heat Resistance: 2000°F..
336.59€
Ex Tax:280.49€
Black Glass Fiber Exhaust Wrap DEI 50mm x 7,5m (2in x 25ft) DEI 010099 USA-DEI-10099 Wrapping headers and down pipes is an important first step in reducing unwanted and power-robbing under hood heat. Less under hood heat results in a cooler air charge for improved performance and keeping exhaust gases hotter within the exhaust system helps in decreasing exhaust density & increases exhaust flow. Design Engineering Stainless Steel Locking Ties are the perfect way to fasten exhaust wrap for a easy, clean and professional installation. Reduce under hood temperatures a realistic 50% Decreases exhaust density & increases exhaust flow Improves horsepower Withstands 1200°F direct/2000°F radiant Only exhaust wrap with installation guide lines Added durability and heat retention NOTE: Design Engineering HT Silicone Coating spray is highly recommended for DEI glass fiber wrap to penetrate, seal, protect and prolong the lifespan of exhaust wrap. NOTE: Wrapping of the catalytic converter is not recommended, as overheating can lead to reduced lifetime of the converter. Instead, try our Corvette Catalytic Converter Shield or create your own shield using our Floor & Tunnel Shield II™. Note of Caution: Wrap is not designed to be moved or removed after it has been heat cycled. After the fibers have been heated, they lose their initial flexibility. This does not reduce the thermal properties of the exhaust wrap. Be aware of this before you decide to remove the wrap. For this reason, you should avoid wrapping any flex-pipes or flex-joints. Note about Titanium Exhaust Systems: DEI does NOT recommend wrapping exhausts made of titanium. The alloys used in the production of titanium exhaust systems tend to be thin and are designed to dissipate heat quickly. Wrapping any titanium exhaust pipe, regardless of brand, can hold in too much heat, and make the titanium alloy turn brittle and prone to premature cracking. If you are seeking to reduce the heat on a titanium exhaust system, DEI recommends using alternatives such as our flexible heat shields. Direct Heat Resistance: 1200°F Radiant Heat Resistance: 2000°F..
28.29€
Ex Tax:23.58€
Black Titanium Exhaust Wrap 2in x 100ft (5cm x 30m) DEI 010002 USA-DEI-10002 Black Titanium Exhaust Wrap, with LR Technology, is made from pulverized lava rock, stranded into a fiber material then woven into a proprietary weave. Black Titanium wrap is engineered to be stronger than most wraps and more durable for improved thermal performance and reliability. Designed to be pliable and resistant to chemical oil spills and vibration breakdown; it secures tightly without pre-wetting and is able to withstand direct heat up to 1800°F and intermittent heat up to 2500°F. Like the original Titanium Wrap, DEI’s Black Titanium Wrap maximizes horsepower and performance by reducing underhood temperatures and maintaining high exhaust gas velocity. Wrapped headers and exhaust also reduces the incidence of heat soak, can prevent harmful burns, protect heat sensitive underhood components, and reduce the level of heat transmitted through the firewall and floor of the vehicle for a more comfortable interior. Black carbon fiber look Extremely pliable for a tight & secure wrap Withstands 1800˚F direct / 2500˚F intermittent heat Pre-wetting roll not necessary for wrapping Reduce underhood temps..
135.61€
Ex Tax:113.01€
Black Titanium Exhaust Wrap 2in x 15ft (5cm x 4,5m) DEI 010005 USA-DEI-10005 Black Titanium Exhaust Wrap, with LR Technology, is made from pulverized lava rock, stranded into a fiber material then woven into a proprietary weave. Black Titanium wrap is engineered to be stronger than most wraps and more durable for improved thermal performance and reliability. Designed to be pliable and resistant to chemical oil spills and vibration breakdown; it secures tightly without pre-wetting and is able to withstand direct heat up to 1800°F and intermittent heat up to 2500°F. Like the original Titanium Wrap, DEI’s Black Titanium Wrap maximizes horsepower and performance by reducing underhood temperatures and maintaining high exhaust gas velocity. Wrapped headers and exhaust also reduces the incidence of heat soak, can prevent harmful burns, protect heat sensitive underhood components, and reduce the level of heat transmitted through the firewall and floor of the vehicle for a more comfortable interior. Black carbon fiber look Extremely pliable for a tight & secure wrap Withstands 1800˚F direct / 2500˚F intermittent heat Pre-wetting roll not necessary for wrapping Reduce underhood temps..
26.34€
Ex Tax:21.95€
Black Titanium Exhaust Wrap 2in x 25ft (5cm x 7,5m) DEI 010004 USA-DEI-10004 Black Titanium Exhaust Wrap, with LR Technology, is made from pulverized lava rock, stranded into a fiber material then woven into a proprietary weave. Black Titanium wrap is engineered to be stronger than most wraps and more durable for improved thermal performance and reliability. Designed to be pliable and resistant to chemical oil spills and vibration breakdown; it secures tightly without pre-wetting and is able to withstand direct heat up to 1800°F and intermittent heat up to 2500°F. Like the original Titanium Wrap, DEI’s Black Titanium Wrap maximizes horsepower and performance by reducing underhood temperatures and maintaining high exhaust gas velocity. Wrapped headers and exhaust also reduces the incidence of heat soak, can prevent harmful burns, protect heat sensitive underhood components, and reduce the level of heat transmitted through the firewall and floor of the vehicle for a more comfortable interior. Black carbon fiber look Extremely pliable for a tight & secure wrap Withstands 1800˚F direct / 2500˚F intermittent heat Pre-wetting roll not necessary for wrapping Reduce underhood temps..
38.05€
Ex Tax:31.71€
Black Titanium Exhaust Wrap 2in x 50ft (5cm x 15m) DEI 010003 USA-DEI-10003 Black Titanium Exhaust Wrap, with LR Technology, is made from pulverized lava rock, stranded into a fiber material then woven into a proprietary weave. Black Titanium wrap is engineered to be stronger than most wraps and more durable for improved thermal performance and reliability. Designed to be pliable and resistant to chemical oil spills and vibration breakdown; it secures tightly without pre-wetting and is able to withstand direct heat up to 1800°F and intermittent heat up to 2500°F. Like the original Titanium Wrap, DEI’s Black Titanium Wrap maximizes horsepower and performance by reducing underhood temperatures and maintaining high exhaust gas velocity. Wrapped headers and exhaust also reduces the incidence of heat soak, can prevent harmful burns, protect heat sensitive underhood components, and reduce the level of heat transmitted through the firewall and floor of the vehicle for a more comfortable interior. Black carbon fiber look Extremely pliable for a tight & secure wrap Withstands 1800˚F direct / 2500˚F intermittent heat Pre-wetting roll not necessary for wrapping Reduce underhood temps..
73.18€
Ex Tax:60.98€
High quality exhaust wrap can withstand a temperature of 800 degrees C, temporarily up to 1000 degrees C. It is manufactured in Austria by a company specialising in the manufacture of heat shields, much better than the Chinese wraps "up to 1200 degrees". It is used for wrapping the manifold and other exhaust system components. It significantly reduces the temperature under the hood. When it is used in turbocharged cars it will also slightly reduce the "lag" by increasing the energy of the fumes. Width: 40mm Thickness: 2mm Length: 5m, 10m, 15m or 30m.Bandaż - 10m..
16.83€
Ex Tax:14.02€
High quality exhaust wrap can withstand a temperature of 800 degrees C, temporarily up to 1000 degrees C. It is manufactured in Austria by a company specialising in the manufacture of heat shields, much better than the Chinese wraps "up to 1200 degrees". It is used for wrapping the manifold and other exhaust system components. It significantly reduces the temperature under the hood. When it is used in turbocharged cars it will also slightly reduce the "lag" by increasing the energy of the fumes. Width: 40mm Thickness: 2mm Length: 5m, 10m, 15m or 30m.Bandaż - 15m..
24.15€
Ex Tax:20.12€
High quality exhaust wrap can withstand a temperature of 800 degrees C, temporarily up to 1000 degrees C. It is manufactured in Austria by a company specialising in the manufacture of heat shields, much better than the Chinese wraps "up to 1200 degrees". It is used for wrapping the manifold and other exhaust system components. It significantly reduces the temperature under the hood. When it is used in turbocharged cars it will also slightly reduce the "lag" by increasing the energy of the fumes. Width: 40mm Thickness: 2mm Length: 5m, 10m, 15m or 30m.Bandaż - 30m..
46.10€
Ex Tax:38.41€
High quality exhaust wrap can withstand a temperature of 800 degrees C, temporarily up to 1000 degrees C. It is manufactured in Austria by a company specialising in the manufacture of heat shields, much better than the Chinese wraps "up to 1200 degrees". It is used for wrapping the manifold and other exhaust system components. It significantly reduces the temperature under the hood. When it is used in turbocharged cars it will also slightly reduce the "lag" by increasing the energy of the fumes. Width: 40mm Thickness: 2mm Length: 5m, 10m, 15m or 30m.Bandaż - 5m..
9.51€
Ex Tax:7.93€
High quality exhaust wrap can withstand a temperature of 800 degrees C, temporarily up to 1000 degrees C. It is manufactured in Austria by a company specialising in the manufacture of heat shields, much better than the Chinese wraps "up to 1200 degrees". It is used for wrapping the manifold and other exhaust system components. It significantly reduces the temperature under the hood. When it is used in turbocharged cars it will also slightly reduce the "lag" by increasing the energy of the fumes. Width: 40mm Thickness: 3mm Length: 5m, 10m, 15m or 30mBandaż - 10m..
18.29€
Ex Tax:15.24€
High quality exhaust wrap can withstand a temperature of 800 degrees C, temporarily up to 1000 degrees C. It is manufactured in Austria by a company specialising in the manufacture of heat shields, much better than the Chinese wraps "up to 1200 degrees". It is used for wrapping the manifold and other exhaust system components. It significantly reduces the temperature under the hood. When it is used in turbocharged cars it will also slightly reduce the "lag" by increasing the energy of the fumes. Width: 40mm Thickness: 3mm Length: 5m, 10m, 15m or 30mBandaż - 15m..
25.85€
Ex Tax:21.54€
High quality exhaust wrap can withstand a temperature of 800 degrees C, temporarily up to 1000 degrees C. It is manufactured in Austria by a company specialising in the manufacture of heat shields, much better than the Chinese wraps "up to 1200 degrees". It is used for wrapping the manifold and other exhaust system components. It significantly reduces the temperature under the hood. When it is used in turbocharged cars it will also slightly reduce the "lag" by increasing the energy of the fumes. Width: 40mm Thickness: 3mm Length: 5m, 10m, 15m or 30mBandaż - 30m..
50.24€
Ex Tax:41.87€
High quality exhaust wrap can withstand a temperature of 800 degrees C, temporarily up to 1000 degrees C. It is manufactured in Austria by a company specialising in the manufacture of heat shields, much better than the Chinese wraps "up to 1200 degrees". It is used for wrapping the manifold and other exhaust system components. It significantly reduces the temperature under the hood. When it is used in turbocharged cars it will also slightly reduce the "lag" by increasing the energy of the fumes. Width: 40mm Thickness: 3mm Length: 5m, 10m, 15m or 30mBandaż - 5m..
10.00€
Ex Tax:8.33€
High quality exhaust wrap can withstand a temperature of 800 degrees C, temporarily up to 1000 degrees C. It is manufactured in Austria by a company specialising in the manufacture of heat shields, much better than the Chinese wraps "up to 1200 degrees". It is used for wrapping the manifold and other exhaust system components. It significantly reduces the temperature under the hood. When it is used in turbocharged cars it will also slightly reduce the "lag" by increasing the energy of the fumes. Width: 50mm Thickness: 2mm Length: 5m, 10m, 15m or 30mBandaż - 10m..
19.27€
Ex Tax:16.06€
High quality exhaust wrap can withstand a temperature of 800 degrees C, temporarily up to 1000 degrees C. It is manufactured in Austria by a company specialising in the manufacture of heat shields, much better than the Chinese wraps "up to 1200 degrees". It is used for wrapping the manifold and other exhaust system components. It significantly reduces the temperature under the hood. When it is used in turbocharged cars it will also slightly reduce the "lag" by increasing the energy of the fumes. Width: 50mm Thickness: 2mm Length: 5m, 10m, 15m or 30mBandaż - 15m..
28.05€
Ex Tax:23.37€
High quality exhaust wrap can withstand a temperature of 800 degrees C, temporarily up to 1000 degrees C. It is manufactured in Austria by a company specialising in the manufacture of heat shields, much better than the Chinese wraps "up to 1200 degrees". It is used for wrapping the manifold and other exhaust system components. It significantly reduces the temperature under the hood. When it is used in turbocharged cars it will also slightly reduce the "lag" by increasing the energy of the fumes. Width: 50mm Thickness: 2mm Length: 5m, 10m, 15m or 30mBandaż - 30m..
53.41€
Ex Tax:44.51€
High quality exhaust wrap can withstand a temperature of 800 degrees C, temporarily up to 1000 degrees C. It is manufactured in Austria by a company specialising in the manufacture of heat shields, much better than the Chinese wraps "up to 1200 degrees". It is used for wrapping the manifold and other exhaust system components. It significantly reduces the temperature under the hood. When it is used in turbocharged cars it will also slightly reduce the "lag" by increasing the energy of the fumes. Width: 50mm Thickness: 2mm Length: 5m, 10m, 15m or 30mBandaż - 5m..
10.98€
Ex Tax:9.15€
High quality exhaust wrap can withstand a temperature of 800 degrees C, temporarily up to 1000 degrees C. It is manufactured in Austria by a company specialising in the manufacture of heat shields, much better than the Chinese wraps "up to 1200 degrees". It is used for wrapping the manifold and other exhaust system components. It significantly reduces the temperature under the hood. When it is used in turbocharged cars it will also slightly reduce the "lag" by increasing the energy of the fumes. Width: 50mm Thickness: 3mm Length: 5m, 10m, 15m or 30mBandaż - 10m..
20.00€
Ex Tax:16.67€
High quality exhaust wrap can withstand a temperature of 800 degrees C, temporarily up to 1000 degrees C. It is manufactured in Austria by a company specialising in the manufacture of heat shields, much better than the Chinese wraps "up to 1200 degrees". It is used for wrapping the manifold and other exhaust system components. It significantly reduces the temperature under the hood. When it is used in turbocharged cars it will also slightly reduce the "lag" by increasing the energy of the fumes. Width: 50mm Thickness: 3mm Length: 5m, 10m, 15m or 30mBandaż - 15m..
29.02€
Ex Tax:24.19€
High quality exhaust wrap can withstand a temperature of 800 degrees C, temporarily up to 1000 degrees C. It is manufactured in Austria by a company specialising in the manufacture of heat shields, much better than the Chinese wraps "up to 1200 degrees". It is used for wrapping the manifold and other exhaust system components. It significantly reduces the temperature under the hood. When it is used in turbocharged cars it will also slightly reduce the "lag" by increasing the energy of the fumes. Width: 50mm Thickness: 3mm Length: 5m, 10m, 15m or 30mBandaż - 30m..
55.85€
Ex Tax:46.54€
High quality exhaust wrap can withstand a temperature of 800 degrees C, temporarily up to 1000 degrees C. It is manufactured in Austria by a company specialising in the manufacture of heat shields, much better than the Chinese wraps "up to 1200 degrees". It is used for wrapping the manifold and other exhaust system components. It significantly reduces the temperature under the hood. When it is used in turbocharged cars it will also slightly reduce the "lag" by increasing the energy of the fumes. Width: 50mm Thickness: 3mm Length: 5m, 10m, 15m or 30mBandaż - 5m..
11.22€
Ex Tax:9.35€
High quality exhaust wrap can withstand a temperature of 800 degrees C, temporarily up to 1000 degrees C. It is manufactured in Austria by a company specialising in the manufacture of heat shields, much better than the Chinese wraps "up to 1200 degrees". It is used for wrapping the manifold and other exhaust system components. It significantly reduces the temperature under the hood. When it is used in turbocharged cars it will also slightly reduce the "lag" by increasing the energy of the fumes. Width: 50mm Thickness: 2mm Length: 5m, 10m or 15m Color: BlackBandaż - 10m..
21.71€
Ex Tax:18.09€
High quality exhaust wrap can withstand a temperature of 800 degrees C, temporarily up to 1000 degrees C. It is manufactured in Austria by a company specialising in the manufacture of heat shields, much better than the Chinese wraps "up to 1200 degrees". It is used for wrapping the manifold and other exhaust system components. It significantly reduces the temperature under the hood. When it is used in turbocharged cars it will also slightly reduce the "lag" by increasing the energy of the fumes. Width: 50mm Thickness: 2mm Length: 5m, 10m or 15m Color: BlackBandaż - 15m..
31.46€
Ex Tax:26.22€
High quality exhaust wrap can withstand a temperature of 800 degrees C, temporarily up to 1000 degrees C. It is manufactured in Austria by a company specialising in the manufacture of heat shields, much better than the Chinese wraps "up to 1200 degrees". It is used for wrapping the manifold and other exhaust system components. It significantly reduces the temperature under the hood. When it is used in turbocharged cars it will also slightly reduce the "lag" by increasing the energy of the fumes. Width: 50mm Thickness: 2mm Length: 5m, 10m or 15m Color: BlackBandaż - 5m..
11.95€
Ex Tax:9.96€
High quality exhaust wrap can withstand a temperature of 800 degrees C, temporarily up to 1000 degrees C. It is manufactured in Austria by a company specialising in the manufacture of heat shields, much better than the Chinese wraps "up to 1200 degrees". It is used for wrapping the manifold and other exhaust system components. It significantly reduces the temperature under the hood. When it is used in turbocharged cars it will also slightly reduce the "lag" by increasing the energy of the fumes. Width: 50mm Thickness: 2mm Length: 5m, 10m or 15m Color: BlueBandaż - 10m..
21.71€
Ex Tax:18.09€
High quality exhaust wrap can withstand a temperature of 800 degrees C, temporarily up to 1000 degrees C. It is manufactured in Austria by a company specialising in the manufacture of heat shields, much better than the Chinese wraps "up to 1200 degrees". It is used for wrapping the manifold and other exhaust system components. It significantly reduces the temperature under the hood. When it is used in turbocharged cars it will also slightly reduce the "lag" by increasing the energy of the fumes. Width: 50mm Thickness: 2mm Length: 5m, 10m or 15m Color: BlueBandaż - 15m..
31.46€
Ex Tax:26.22€
High quality exhaust wrap can withstand a temperature of 800 degrees C, temporarily up to 1000 degrees C. It is manufactured in Austria by a company specialising in the manufacture of heat shields, much better than the Chinese wraps "up to 1200 degrees". It is used for wrapping the manifold and other exhaust system components. It significantly reduces the temperature under the hood. When it is used in turbocharged cars it will also slightly reduce the "lag" by increasing the energy of the fumes. Width: 50mm Thickness: 2mm Length: 5m, 10m or 15m Color: BlueBandaż - 30m..
41.22€
Ex Tax:34.35€
High quality exhaust wrap can withstand a temperature of 800 degrees C, temporarily up to 1000 degrees C. It is manufactured in Austria by a company specialising in the manufacture of heat shields, much better than the Chinese wraps "up to 1200 degrees". It is used for wrapping the manifold and other exhaust system components. It significantly reduces the temperature under the hood. When it is used in turbocharged cars it will also slightly reduce the "lag" by increasing the energy of the fumes. Width: 50mm Thickness: 2mm Length: 5m, 10m or 15m Color: BlueBandaż - 5m..
11.95€
Ex Tax:9.96€
A thermal insulation bandage of very high quality, withstanding temperatures of 1300°C, temporarily up to 1650°C. Made of a special material that is resistant to very high temperatures, it has a beautiful golden colour. The bandage does not dust or crumble, unlike cheap, low-quality bandages. It is used to wrap the manifold and other exhaust system components. Its use can significantly reduce the temperature under the bonnet, while its use in turbocharged cars will also reduce "lag" by increasing the energy of the exhaust. Width: 50mm Thickness: 2mm Length: selectable 5m, 10m, 15m, 30m..
31.46€
Ex Tax:26.22€
A thermal insulation bandage of very high quality, withstanding temperatures of 1300°C, temporarily up to 1650°C. Made of a special material that is resistant to very high temperatures, it has a beautiful golden colour. The bandage does not dust or crumble, unlike cheap, low-quality bandages. It is used to wrap the manifold and other exhaust system components. Its use can significantly reduce the temperature under the bonnet, while its use in turbocharged cars will also reduce "lag" by increasing the energy of the exhaust. Width: 50mm Thickness: 2mm Length: selectable 5m, 10m, 15m, 30m..
46.10€
Ex Tax:38.41€
A thermal insulation bandage of very high quality, withstanding temperatures of 1300°C, temporarily up to 1650°C. Made of a special material that is resistant to very high temperatures, it has a beautiful golden colour. The bandage does not dust or crumble, unlike cheap, low-quality bandages. It is used to wrap the manifold and other exhaust system components. Its use can significantly reduce the temperature under the bonnet, while its use in turbocharged cars will also reduce "lag" by increasing the energy of the exhaust. Width: 50mm Thickness: 2mm Length: selectable 5m, 10m, 15m, 30m..
85.12€
Ex Tax:70.94€
A thermal insulation bandage of very high quality, withstanding temperatures of 1300°C, temporarily up to 1650°C. Made of a special material that is resistant to very high temperatures, it has a beautiful golden colour. The bandage does not dust or crumble, unlike cheap, low-quality bandages. It is used to wrap the manifold and other exhaust system components. Its use can significantly reduce the temperature under the bonnet, while its use in turbocharged cars will also reduce "lag" by increasing the energy of the exhaust. Width: 50mm Thickness: 2mm Length: selectable 5m, 10m, 15m, 30m..
16.83€
Ex Tax:14.02€
EXO Series Exhaust Wrap Black 1,5" x 10ft (4cm x 3m) DEI 010077 USA-DEI-10077 EXO Series exhaust wrap solves the problem of extreme exhaust heat in extreme environments like offroading and powersports. EXO Series exhaust wrap is designed for extreme environment use. Traditional exhaust wraps have not been able to withstand the extreme use that Off-road, Dirt track, Desert and other forms of driving have with exposure to water and dirt. The EXO Series is a dual-layer design, using a combination of hi-temp glass fiber, covered with a 304 grade stainless steel exoskeleton. This unique construction maintains high heat protection while offering superior abrasion and impact protection. Our unique Air Gap Technology keeps direct contact of the glass fiber wrap off the hot surface creating an insulating air barrier. The EXO Series exhaust wrap comes in a special 1.5" width, making it easy to install on any type of header, exhaust pipe or exhaust system making it perfect for high impact spot protection. In addition, the stainless steel exoskeleton locks together when overlapped keeping the wrap tight and making installation easy. Delivering outstanding looks and Rugged performance for long term durability, available in Black or Tan in either 1.5" x 10ft, 20ft, or 30ft rolls. NOTE: Wrapping of the catalytic converter is not recommended, as overheating can lead to reduced lifetime of the converter. Instead, try our Corvette Catalytic Converter Shield or create your own shield using our Floor & Tunnel Shield II™. Note of Caution: Wrap is not designed to be moved or removed after it has been heat cycled. After the fibers have been heated, they lose their initial flexibility. This does not reduce the thermal properties of the exhaust wrap. Be aware of this before you decide to remove the wrap. For this reason, you should avoid wrapping any flex-pipes or flex-joints. Note about Titanium Exhaust Systems: DEI does NOT recommend wrapping exhausts made of titanium. The alloys used in the production of titanium exhaust systems tend to be thin and are designed to dissipate heat quickly. Wrapping any titanium exhaust pipe, regardless of brand, can hold in too much heat, and make the titanium alloy turn brittle and prone to premature cracking. If you are seeking to reduce the heat on a titanium exhaust system, DEI recommends using alternatives such as our flexible heat shields. Direct Heat Resistance: 1200°F Radiant Heat Resistance: 2000°F..
40.98€
Ex Tax:34.15€
EXO Series Exhaust Wrap Black 1,5" x 20ft (4cm x 6m) DEI 010078 USA-DEI-10078 EXO Series exhaust wrap solves the problem of extreme exhaust heat in extreme environments like offroading and powersports. EXO Series exhaust wrap is designed for extreme environment use. Traditional exhaust wraps have not been able to withstand the extreme use that Off-road, Dirt track, Desert and other forms of driving have with exposure to water and dirt. The EXO Series is a dual-layer design, using a combination of hi-temp glass fiber, covered with a 304 grade stainless steel exoskeleton. This unique construction maintains high heat protection while offering superior abrasion and impact protection. Our unique Air Gap Technology keeps direct contact of the glass fiber wrap off the hot surface creating an insulating air barrier. The EXO Series exhaust wrap comes in a special 1.5" width, making it easy to install on any type of header, exhaust pipe or exhaust system making it perfect for high impact spot protection. In addition, the stainless steel exoskeleton locks together when overlapped keeping the wrap tight and making installation easy. Delivering outstanding looks and Rugged performance for long term durability, available in Black or Tan in either 1.5" x 10ft, 20ft, or 30ft rolls. NOTE: Wrapping of the catalytic converter is not recommended, as overheating can lead to reduced lifetime of the converter. Instead, try our Corvette Catalytic Converter Shield or create your own shield using our Floor & Tunnel Shield II™. Note of Caution: Wrap is not designed to be moved or removed after it has been heat cycled. After the fibers have been heated, they lose their initial flexibility. This does not reduce the thermal properties of the exhaust wrap. Be aware of this before you decide to remove the wrap. For this reason, you should avoid wrapping any flex-pipes or flex-joints. Note about Titanium Exhaust Systems: DEI does NOT recommend wrapping exhausts made of titanium. The alloys used in the production of titanium exhaust systems tend to be thin and are designed to dissipate heat quickly. Wrapping any titanium exhaust pipe, regardless of brand, can hold in too much heat, and make the titanium alloy turn brittle and prone to premature cracking. If you are seeking to reduce the heat on a titanium exhaust system, DEI recommends using alternatives such as our flexible heat shields. Direct Heat Resistance: 1200°F Radiant Heat Resistance: 2000°F..
92.68€
Ex Tax:77.24€
EXO Series Exhaust Wrap Black 1,5" x 30ft (4cm x 9m) DEI 010058 USA-DEI-10058 EXO Series exhaust wrap solves the problem of extreme exhaust heat in extreme environments like offroading and powersports. EXO Series exhaust wrap is designed for extreme environment use. Traditional exhaust wraps have not been able to withstand the extreme use that Off-road, Dirt track, Desert and other forms of driving have with exposure to water and dirt. The EXO Series is a dual-layer design, using a combination of hi-temp glass fiber, covered with a 304 grade stainless steel exoskeleton. This unique construction maintains high heat protection while offering superior abrasion and impact protection. Our unique Air Gap Technology keeps direct contact of the glass fiber wrap off the hot surface creating an insulating air barrier. The EXO Series exhaust wrap comes in a special 1.5" width, making it easy to install on any type of header, exhaust pipe or exhaust system making it perfect for high impact spot protection. In addition, the stainless steel exoskeleton locks together when overlapped keeping the wrap tight and making installation easy. Delivering outstanding looks and Rugged performance for long term durability, available in Black or Tan in either 1.5" x 10ft, 20ft, or 30ft rolls. NOTE: Wrapping of the catalytic converter is not recommended, as overheating can lead to reduced lifetime of the converter. Instead, try our Corvette Catalytic Converter Shield or create your own shield using our Floor & Tunnel Shield II™. Note of Caution: Wrap is not designed to be moved or removed after it has been heat cycled. After the fibers have been heated, they lose their initial flexibility. This does not reduce the thermal properties of the exhaust wrap. Be aware of this before you decide to remove the wrap. For this reason, you should avoid wrapping any flex-pipes or flex-joints. Note about Titanium Exhaust Systems: DEI does NOT recommend wrapping exhausts made of titanium. The alloys used in the production of titanium exhaust systems tend to be thin and are designed to dissipate heat quickly. Wrapping any titanium exhaust pipe, regardless of brand, can hold in too much heat, and make the titanium alloy turn brittle and prone to premature cracking. If you are seeking to reduce the heat on a titanium exhaust system, DEI recommends using alternatives such as our flexible heat shields. Direct Heat Resistance: 1200°F Radiant Heat Resistance: 2000°F..
121.95€
Ex Tax:101.63€
EXO Series Exhaust Wrap Tan 1,5" x 10ft (4cm x 3m) DEI 010075 USA-DEI-10075 EXO Series exhaust wrap solves the problem of extreme exhaust heat in extreme environments like offroading and powersports. EXO Series exhaust wrap is designed for extreme environment use. Traditional exhaust wraps have not been able to withstand the extreme use that Off-road, Dirt track, Desert and other forms of driving have with exposure to water and dirt. The EXO Series is a dual-layer design, using a combination of hi-temp glass fiber, covered with a 304 grade stainless steel exoskeleton. This unique construction maintains high heat protection while offering superior abrasion and impact protection. Our unique Air Gap Technology keeps direct contact of the glass fiber wrap off the hot surface creating an insulating air barrier. The EXO Series exhaust wrap comes in a special 1.5" width, making it easy to install on any type of header, exhaust pipe or exhaust system making it perfect for high impact spot protection. In addition, the stainless steel exoskeleton locks together when overlapped keeping the wrap tight and making installation easy. Delivering outstanding looks and Rugged performance for long term durability, available in Black or Tan in either 1.5" x 10ft, 20ft, or 30ft rolls. NOTE: Wrapping of the catalytic converter is not recommended, as overheating can lead to reduced lifetime of the converter. Instead, try our Corvette Catalytic Converter Shield or create your own shield using our Floor & Tunnel Shield II™. Note of Caution: Wrap is not designed to be moved or removed after it has been heat cycled. After the fibers have been heated, they lose their initial flexibility. This does not reduce the thermal properties of the exhaust wrap. Be aware of this before you decide to remove the wrap. For this reason, you should avoid wrapping any flex-pipes or flex-joints. Note about Titanium Exhaust Systems: DEI does NOT recommend wrapping exhausts made of titanium. The alloys used in the production of titanium exhaust systems tend to be thin and are designed to dissipate heat quickly. Wrapping any titanium exhaust pipe, regardless of brand, can hold in too much heat, and make the titanium alloy turn brittle and prone to premature cracking. If you are seeking to reduce the heat on a titanium exhaust system, DEI recommends using alternatives such as our flexible heat shields. Direct Heat Resistance: 1200°F Radiant Heat Resistance: 2000°F..
38.05€
Ex Tax:31.71€
EXO Series Exhaust Wrap Tan 1,5" x 20ft (4cm x 6m) DEI 010076 USA-DEI-10076 EXO Series exhaust wrap solves the problem of extreme exhaust heat in extreme environments like offroading and powersports. EXO Series exhaust wrap is designed for extreme environment use. Traditional exhaust wraps have not been able to withstand the extreme use that Off-road, Dirt track, Desert and other forms of driving have with exposure to water and dirt. The EXO Series is a dual-layer design, using a combination of hi-temp glass fiber, covered with a 304 grade stainless steel exoskeleton. This unique construction maintains high heat protection while offering superior abrasion and impact protection. Our unique Air Gap Technology keeps direct contact of the glass fiber wrap off the hot surface creating an insulating air barrier. The EXO Series exhaust wrap comes in a special 1.5" width, making it easy to install on any type of header, exhaust pipe or exhaust system making it perfect for high impact spot protection. In addition, the stainless steel exoskeleton locks together when overlapped keeping the wrap tight and making installation easy. Delivering outstanding looks and Rugged performance for long term durability, available in Black or Tan in either 1.5" x 10ft, 20ft, or 30ft rolls. NOTE: Wrapping of the catalytic converter is not recommended, as overheating can lead to reduced lifetime of the converter. Instead, try our Corvette Catalytic Converter Shield or create your own shield using our Floor & Tunnel Shield II™. Note of Caution: Wrap is not designed to be moved or removed after it has been heat cycled. After the fibers have been heated, they lose their initial flexibility. This does not reduce the thermal properties of the exhaust wrap. Be aware of this before you decide to remove the wrap. For this reason, you should avoid wrapping any flex-pipes or flex-joints. Note about Titanium Exhaust Systems: DEI does NOT recommend wrapping exhausts made of titanium. The alloys used in the production of titanium exhaust systems tend to be thin and are designed to dissipate heat quickly. Wrapping any titanium exhaust pipe, regardless of brand, can hold in too much heat, and make the titanium alloy turn brittle and prone to premature cracking. If you are seeking to reduce the heat on a titanium exhaust system, DEI recommends using alternatives such as our flexible heat shields. Direct Heat Resistance: 1200°F Radiant Heat Resistance: 2000°F..
73.17€
Ex Tax:60.98€
EXO Series Exhaust Wrap Tan 1,5" x 30ft (4cm x 9m) DEI 010059 USA-DEI-10059 EXO Series exhaust wrap solves the problem of extreme exhaust heat in extreme environments like offroading and powersports. EXO Series exhaust wrap is designed for extreme environment use. Traditional exhaust wraps have not been able to withstand the extreme use that Off-road, Dirt track, Desert and other forms of driving have with exposure to water and dirt. The EXO Series is a dual-layer design, using a combination of hi-temp glass fiber, covered with a 304 grade stainless steel exoskeleton. This unique construction maintains high heat protection while offering superior abrasion and impact protection. Our unique Air Gap Technology keeps direct contact of the glass fiber wrap off the hot surface creating an insulating air barrier. The EXO Series exhaust wrap comes in a special 1.5" width, making it easy to install on any type of header, exhaust pipe or exhaust system making it perfect for high impact spot protection. In addition, the stainless steel exoskeleton locks together when overlapped keeping the wrap tight and making installation easy. Delivering outstanding looks and Rugged performance for long term durability, available in Black or Tan in either 1.5" x 10ft, 20ft, or 30ft rolls. NOTE: Wrapping of the catalytic converter is not recommended, as overheating can lead to reduced lifetime of the converter. Instead, try our Corvette Catalytic Converter Shield or create your own shield using our Floor & Tunnel Shield II™. Note of Caution: Wrap is not designed to be moved or removed after it has been heat cycled. After the fibers have been heated, they lose their initial flexibility. This does not reduce the thermal properties of the exhaust wrap. Be aware of this before you decide to remove the wrap. For this reason, you should avoid wrapping any flex-pipes or flex-joints. Note about Titanium Exhaust Systems: DEI does NOT recommend wrapping exhausts made of titanium. The alloys used in the production of titanium exhaust systems tend to be thin and are designed to dissipate heat quickly. Wrapping any titanium exhaust pipe, regardless of brand, can hold in too much heat, and make the titanium alloy turn brittle and prone to premature cracking. If you are seeking to reduce the heat on a titanium exhaust system, DEI recommends using alternatives such as our flexible heat shields. Direct Heat Resistance: 1200°F Radiant Heat Resistance: 2000°F..
106.34€
Ex Tax:88.62€
Hose clamp made 100% out of high quality stainless steel. Dimensions: length - 200mm, width - 5mm. The clamp is required to accurately attach thermo wrap to the exhaust manifold and downpipe. A unique design of the cleat counteracts loosening of the clamp during exploitation...
0.48€
Ex Tax:0.40€
Hose clamp made 100% out of high quality stainless steel. Dimensions: length - 300mm, width - 5mm. The clamp is required to accurately attach thermo wrap to the exhaust manifold and downpipe. A unique design of the cleat counteracts loosening of the clamp during exploitation...
0.49€
Ex Tax:0.40€
Hose clamp made 100% out of high quality stainless steel. Dimensions: length - 350mm, width - 5mm. The clamp is required to accurately attach thermo wrap to the exhaust manifold and downpipe. A unique design of the cleat counteracts loosening of the clamp during exploitation...
0.50€
Ex Tax:0.42€
Clamp made of 100% high quality stainless steel, has a length of 360mm and a width of 5mm. Necessary when putting the thermal insulation bandage on the collector. The unique latch design prevents the clamp from loosening during use...
0.50€
Ex Tax:0.42€
Highest quality SILVER thermal insulation wrap additionally protected with a silver thermo-reflective layer that is resist to 800 degrees C, temporarily up to 1000 degrees C. Manufactured in Austria by a company specializing in the production of thermal shields, it is much better than Chinese bandages "up to 1200 degrees ". Recommended for wrapping the intake system around the exhaust system. Its use allows you to significantly reduce the temperature in the intake system, isolating it from the environment. Width: 50mm Thickness: 2mm Length: 5m, 10m, 15mBandaż - 10m..
21.71€
Ex Tax:18.09€
Highest quality SILVER thermal insulation wrap additionally protected with a silver thermo-reflective layer that is resist to 800 degrees C, temporarily up to 1000 degrees C. Manufactured in Austria by a company specializing in the production of thermal shields, it is much better than Chinese bandages "up to 1200 degrees ". Recommended for wrapping the intake system around the exhaust system. Its use allows you to significantly reduce the temperature in the intake system, isolating it from the environment. Width: 50mm Thickness: 2mm Length: 5m, 10m, 15mBandaż - 15m..
31.46€
Ex Tax:26.22€
Highest quality SILVER thermal insulation wrap additionally protected with a silver thermo-reflective layer that is resist to 800 degrees C, temporarily up to 1000 degrees C. Manufactured in Austria by a company specializing in the production of thermal shields, it is much better than Chinese bandages "up to 1200 degrees ". Recommended for wrapping the intake system around the exhaust system. Its use allows you to significantly reduce the temperature in the intake system, isolating it from the environment. Width: 50mm Thickness: 2mm Length: 5m, 10m, 15mBandaż - 30m..
60.73€
Ex Tax:50.61€
Highest quality SILVER thermal insulation wrap additionally protected with a silver thermo-reflective layer that is resist to 800 degrees C, temporarily up to 1000 degrees C. Manufactured in Austria by a company specializing in the production of thermal shields, it is much better than Chinese bandages "up to 1200 degrees ". Recommended for wrapping the intake system around the exhaust system. Its use allows you to significantly reduce the temperature in the intake system, isolating it from the environment. Width: 50mm Thickness: 2mm Length: 5m, 10m, 15mBandaż - 5m..
11.95€
Ex Tax:9.96€
Tan Glass Fiber Exhaust Wrap 15cm x 30m (6" x 100ft) DEI 010104 USA-DEI-10104 An important first step in reducing unwanted and power-robbing under hood heat is wrapping headers and down pipes. Less under hood radiant heat results in a cooler air charge for improved performance and keeping exhaust gases hotter within the exhaust system helps in decreasing exhaust density & increases exhaust flow. Design Engineering Stainless Steel Locking Ties are the perfect way to fasten exhaust wrap for a easy, clean and professional installation. Reduce under hood temperatures a realistic 50% Decreases exhaust density & increases exhaust flow Improves horsepower Withstands 1200°F direct/2000°F radiant Only exhaust wrap with installation guide lines Added durability and heat retention NOTE: Design Engineering HT Silicone Coating spray is highly recommended for DEI glass fiber wrap to penetrate, seal, protect and prolong the lifespan of exhaust wrap. NOTE: Wrapping of the catalytic converter is not recommended, as overheating can lead to reduced lifetime of the converter. Instead, try our Corvette Catalytic Converter Shield or create your own shield using our Floor & Tunnel Shield II™. Note of Caution: Wrap is not designed to be moved or removed after it has been heat cycled. After the fibers have been heated, they lose their initial flexibility. This does not reduce the thermal properties of the exhaust wrap. Be aware of this before you decide to remove the wrap. For this reason, you should avoid wrapping any flex-pipes or flex-joints. Note about Titanium Exhaust Systems: DEI does NOT recommend wrapping exhausts made of titanium. The alloys used in the production of titanium exhaust systems tend to be thin and are designed to dissipate heat quickly. Wrapping any titanium exhaust pipe, regardless of brand, can hold in too much heat, and make the titanium alloy turn brittle and prone to premature cracking. If you are seeking to reduce the heat on a titanium exhaust system, DEI recommends using alternatives such as our flexible heat shields. Direct Heat Resistance: 1200°F Radiant Heat Resistance: 2000°F..
268.29€
Ex Tax:223.58€
Tan Glass Fiber Exhaust Wrap 2.5cm x 15m (1"x50ft) DEI 010101 USA-DEI-10101 An important first step in reducing unwanted and power-robbing under hood heat is wrapping headers and down pipes. Less under hood radiant heat results in a cooler air charge for improved performance and keeping exhaust gases hotter within the exhaust system helps in decreasing exhaust density & increases exhaust flow. Design Engineering Stainless Steel Locking Ties are the perfect way to fasten exhaust wrap for a easy, clean and professional installation. Reduce under hood temperatures a realistic 50% Decreases exhaust density & increases exhaust flow Improves horsepower Withstands 1200°F direct/2000°F radiant Only exhaust wrap with installation guide lines Added durability and heat retention NOTE: Design Engineering HT Silicone Coating spray is highly recommended for DEI glass fiber wrap to penetrate, seal, protect and prolong the lifespan of exhaust wrap. NOTE: Wrapping of the catalytic converter is not recommended, as overheating can lead to reduced lifetime of the converter. Instead, try our Corvette Catalytic Converter Shield or create your own shield using our Floor & Tunnel Shield II™. Note of Caution: Wrap is not designed to be moved or removed after it has been heat cycled. After the fibers have been heated, they lose their initial flexibility. This does not reduce the thermal properties of the exhaust wrap. Be aware of this before you decide to remove the wrap. For this reason, you should avoid wrapping any flex-pipes or flex-joints. Note about Titanium Exhaust Systems: DEI does NOT recommend wrapping exhausts made of titanium. The alloys used in the production of titanium exhaust systems tend to be thin and are designed to dissipate heat quickly. Wrapping any titanium exhaust pipe, regardless of brand, can hold in too much heat, and make the titanium alloy turn brittle and prone to premature cracking. If you are seeking to reduce the heat on a titanium exhaust system, DEI recommends using alternatives such as our flexible heat shields. Direct Heat Resistance: 1200°F Radiant Heat Resistance: 2000°F..
36.00€
Ex Tax:30.00€
Tan Glass Fiber Exhaust Wrap 2.5cm x 30m (1" x 100ft) DEI 010117 USA-DEI-10117 An important first step in reducing unwanted and power-robbing under hood heat is wrapping headers and down pipes. Less under hood radiant heat results in a cooler air charge for improved performance and keeping exhaust gases hotter within the exhaust system helps in decreasing exhaust density & increases exhaust flow. Design Engineering Stainless Steel Locking Ties are the perfect way to fasten exhaust wrap for a easy, clean and professional installation. Reduce under hood temperatures a realistic 50% Decreases exhaust density & increases exhaust flow Improves horsepower Withstands 1200°F direct/2000°F radiant Only exhaust wrap with installation guide lines Added durability and heat retention NOTE: Design Engineering HT Silicone Coating spray is highly recommended for DEI glass fiber wrap to penetrate, seal, protect and prolong the lifespan of exhaust wrap. NOTE: Wrapping of the catalytic converter is not recommended, as overheating can lead to reduced lifetime of the converter. Instead, try our Corvette Catalytic Converter Shield or create your own shield using our Floor & Tunnel Shield II™. Note of Caution: Wrap is not designed to be moved or removed after it has been heat cycled. After the fibers have been heated, they lose their initial flexibility. This does not reduce the thermal properties of the exhaust wrap. Be aware of this before you decide to remove the wrap. For this reason, you should avoid wrapping any flex-pipes or flex-joints. Note about Titanium Exhaust Systems: DEI does NOT recommend wrapping exhausts made of titanium. The alloys used in the production of titanium exhaust systems tend to be thin and are designed to dissipate heat quickly. Wrapping any titanium exhaust pipe, regardless of brand, can hold in too much heat, and make the titanium alloy turn brittle and prone to premature cracking. If you are seeking to reduce the heat on a titanium exhaust system, DEI recommends using alternatives such as our flexible heat shields. Direct Heat Resistance: 1200°F Radiant Heat Resistance: 2000°F..
84.88€
Ex Tax:70.73€
Tan Glass Fiber Exhaust Wrap 2.5cm x 4.5m (1" x 15ft) DEI 010105 USA-DEI-10105 An important first step in reducing unwanted and power-robbing under hood heat is wrapping headers and down pipes. Less under hood radiant heat results in a cooler air charge for improved performance and keeping exhaust gases hotter within the exhaust system helps in decreasing exhaust density & increases exhaust flow. Design Engineering Stainless Steel Locking Ties are the perfect way to fasten exhaust wrap for a easy, clean and professional installation. Reduce under hood temperatures a realistic 50% Decreases exhaust density & increases exhaust flow Improves horsepower Withstands 1200°F direct/2000°F radiant Only exhaust wrap with installation guide lines Added durability and heat retention NOTE: Design Engineering HT Silicone Coating spray is highly recommended for DEI glass fiber wrap to penetrate, seal, protect and prolong the lifespan of exhaust wrap. NOTE: Wrapping of the catalytic converter is not recommended, as overheating can lead to reduced lifetime of the converter. Instead, try our Corvette Catalytic Converter Shield or create your own shield using our Floor & Tunnel Shield II™. Note of Caution: Wrap is not designed to be moved or removed after it has been heat cycled. After the fibers have been heated, they lose their initial flexibility. This does not reduce the thermal properties of the exhaust wrap. Be aware of this before you decide to remove the wrap. For this reason, you should avoid wrapping any flex-pipes or flex-joints. Note about Titanium Exhaust Systems: DEI does NOT recommend wrapping exhausts made of titanium. The alloys used in the production of titanium exhaust systems tend to be thin and are designed to dissipate heat quickly. Wrapping any titanium exhaust pipe, regardless of brand, can hold in too much heat, and make the titanium alloy turn brittle and prone to premature cracking. If you are seeking to reduce the heat on a titanium exhaust system, DEI recommends using alternatives such as our flexible heat shields. Direct Heat Resistance: 1200°F Radiant Heat Resistance: 2000°F..
13.17€
Ex Tax:10.98€
Tan Glass Fiber Exhaust Wrap 5cm x 15m (2" x 50ft) DEI 010102 USA-DEI-10102 An important first step in reducing unwanted and power-robbing under hood heat is wrapping headers and down pipes. Less under hood radiant heat results in a cooler air charge for improved performance and keeping exhaust gases hotter within the exhaust system helps in decreasing exhaust density & increases exhaust flow. Design Engineering Stainless Steel Locking Ties are the perfect way to fasten exhaust wrap for a easy, clean and professional installation. Reduce under hood temperatures a realistic 50% Decreases exhaust density & increases exhaust flow Improves horsepower Withstands 1200°F direct/2000°F radiant Only exhaust wrap with installation guide lines Added durability and heat retention NOTE: Design Engineering HT Silicone Coating spray is highly recommended for DEI glass fiber wrap to penetrate, seal, protect and prolong the lifespan of exhaust wrap. NOTE: Wrapping of the catalytic converter is not recommended, as overheating can lead to reduced lifetime of the converter. Instead, try our Corvette Catalytic Converter Shield or create your own shield using our Floor & Tunnel Shield II™. Note of Caution: Wrap is not designed to be moved or removed after it has been heat cycled. After the fibers have been heated, they lose their initial flexibility. This does not reduce the thermal properties of the exhaust wrap. Be aware of this before you decide to remove the wrap. For this reason, you should avoid wrapping any flex-pipes or flex-joints. Note about Titanium Exhaust Systems: DEI does NOT recommend wrapping exhausts made of titanium. The alloys used in the production of titanium exhaust systems tend to be thin and are designed to dissipate heat quickly. Wrapping any titanium exhaust pipe, regardless of brand, can hold in too much heat, and make the titanium alloy turn brittle and prone to premature cracking. If you are seeking to reduce the heat on a titanium exhaust system, DEI recommends using alternatives such as our flexible heat shields. Direct Heat Resistance: 1200°F Radiant Heat Resistance: 2000°F..
63.41€
Ex Tax:52.85€
Tan Glass Fiber Exhaust Wrap 5cm x 30m (2" x 100ft) DEI 010103 USA-DEI-10103 An important first step in reducing unwanted and power-robbing under hood heat is wrapping headers and down pipes. Less under hood radiant heat results in a cooler air charge for improved performance and keeping exhaust gases hotter within the exhaust system helps in decreasing exhaust density & increases exhaust flow. Design Engineering Stainless Steel Locking Ties are the perfect way to fasten exhaust wrap for a easy, clean and professional installation. Reduce under hood temperatures a realistic 50% Decreases exhaust density & increases exhaust flow Improves horsepower Withstands 1200°F direct/2000°F radiant Only exhaust wrap with installation guide lines Added durability and heat retention NOTE: Design Engineering HT Silicone Coating spray is highly recommended for DEI glass fiber wrap to penetrate, seal, protect and prolong the lifespan of exhaust wrap. NOTE: Wrapping of the catalytic converter is not recommended, as overheating can lead to reduced lifetime of the converter. Instead, try our Corvette Catalytic Converter Shield or create your own shield using our Floor & Tunnel Shield II™. Note of Caution: Wrap is not designed to be moved or removed after it has been heat cycled. After the fibers have been heated, they lose their initial flexibility. This does not reduce the thermal properties of the exhaust wrap. Be aware of this before you decide to remove the wrap. For this reason, you should avoid wrapping any flex-pipes or flex-joints. Note about Titanium Exhaust Systems: DEI does NOT recommend wrapping exhausts made of titanium. The alloys used in the production of titanium exhaust systems tend to be thin and are designed to dissipate heat quickly. Wrapping any titanium exhaust pipe, regardless of brand, can hold in too much heat, and make the titanium alloy turn brittle and prone to premature cracking. If you are seeking to reduce the heat on a titanium exhaust system, DEI recommends using alternatives such as our flexible heat shields. Direct Heat Resistance: 1200°F Radiant Heat Resistance: 2000°F..
112.20€
Ex Tax:93.50€
Tan Glass Fiber Exhaust Wrap 5cm x 4.5m (2" x 15ft) DEI 010106 USA-DEI-10106 An important first step in reducing unwanted and power-robbing under hood heat is wrapping headers and down pipes. Less under hood radiant heat results in a cooler air charge for improved performance and keeping exhaust gases hotter within the exhaust system helps in decreasing exhaust density & increases exhaust flow. Design Engineering Stainless Steel Locking Ties are the perfect way to fasten exhaust wrap for a easy, clean and professional installation. Reduce under hood temperatures a realistic 50% Decreases exhaust density & increases exhaust flow Improves horsepower Withstands 1200°F direct/2000°F radiant Only exhaust wrap with installation guide lines Added durability and heat retention NOTE: Design Engineering HT Silicone Coating spray is highly recommended for DEI glass fiber wrap to penetrate, seal, protect and prolong the lifespan of exhaust wrap. NOTE: Wrapping of the catalytic converter is not recommended, as overheating can lead to reduced lifetime of the converter. Instead, try our Corvette Catalytic Converter Shield or create your own shield using our Floor & Tunnel Shield II™. Note of Caution: Wrap is not designed to be moved or removed after it has been heat cycled. After the fibers have been heated, they lose their initial flexibility. This does not reduce the thermal properties of the exhaust wrap. Be aware of this before you decide to remove the wrap. For this reason, you should avoid wrapping any flex-pipes or flex-joints. Note about Titanium Exhaust Systems: DEI does NOT recommend wrapping exhausts made of titanium. The alloys used in the production of titanium exhaust systems tend to be thin and are designed to dissipate heat quickly. Wrapping any titanium exhaust pipe, regardless of brand, can hold in too much heat, and make the titanium alloy turn brittle and prone to premature cracking. If you are seeking to reduce the heat on a titanium exhaust system, DEI recommends using alternatives such as our flexible heat shields. Direct Heat Resistance: 1200°F Radiant Heat Resistance: 2000°F..
20.39€
Ex Tax:16.99€
Thermal tape DEI 5cm x 4.5m, black Manufacturer: DEI Article number: DEI-10121..
20.39€
Ex Tax:16.99€
Glass Fiber Exhaust Wraps solve the problem of extreme underhood heat and improve exhaust system performance. Wrapping headers and down pipes is an important first step in reducing unwanted and power-robbing under hood heat. Less under hood heat results in a cooler air charge for improved performance and keeping exhaust gases hotter within the exhaust system helps in decreasing exhaust density & increases exhaust flow. Design Engineering Stainless Steel Locking Ties are the perfect way to fasten exhaust wrap for a easy, clean and professional installation. Reduce under hood temperatures a realistic 50% Decreases exhaust density & increases exhaust flow Improves horsepower Withstands 1200°F direct/2000°F radiant Only exhaust wrap with installation guide lines Added durability and heat retention NOTE: Catalytic Convertors: Wrapping of the catalytic converter is not recommended, as overheating can lead to reduced lifetime of the converter. Instead, try our Corvette Catalytic Converter Shield or create your own shield using our Floor & Tunnel Shield II™. Removal: Exhaust wrap is not designed to be moved or removed after it has been heat cycled. After the fibers have been heated, they lose their initial flexibility. This does not reduce the thermal properties of the exhaust wrap. Be aware of this before you decide to remove the wrap. For this reason, you should avoid wrapping any flex-pipes or flex-joints. Titanium Exhaust Pipe Systems: DEI does NOT recommend wrapping exhausts made of titanium. The alloys used in the production of titanium exhaust systems tend to be thin and are designed to dissipate heat quickly. Wrapping any titanium exhaust pipe, regardless of brand, can hold in too much heat, and make the titanium alloy turn brittle and prone to premature cracking. If you are seeking to reduce the heat on a titanium exhaust system, DEI recommends using alternatives such as our flexible heat shields. Color Fade: While the performance and properties of black exhaust wrap does not deteriorate, the black color will fade over time and with use. It will fade faster in higher heat applications such as during racing and on turbo manifolds. If it does fade, it will fade to the color of the original tan wrap. It can be coated with HT Silicone Coating Spray to give it a longer lasting black finish. Design Engineering HT Silicone Coating spray is highly recommended for DEI glass fiber wrap to penetrate, seal, protect and prolong the lifespan of exhaust wrap. Direct Heat Resistance: 1200°F Radiant Heat Resistance: 2000°F Color: Black..
15.51€
Ex Tax:12.93€
Thermal Tape DEI Titanium 2.5cm x 15m (1in x 50ft) DEI 010126 USA-DEI-10126 DEI's ORIGINAL Titanium™ exhaust wrap, with LR Technology, is made from pulverized lava rock, stranded into a fiber material and woven into a proprietary weave. Titanium wrap is engineered to be stronger than most wraps and more durable for improved thermal performance and reliability. Perfect for any automotive or motorcycle application! Withstands 1800˚F direct/2500˚F intermittent heat Promotes increased flow for improved performance Reduces temperature & vibration breakdown Extremely pliable for a tight and secure wrap DEI HT Silicone Coating not required Pre-wetting roll not necessary for wrapping Hi-tech carbon fiber look High resistance to abrasions, oil spills, temperatures and vibration breakdown NOTE: Wrapping of the catalytic converter is not recommended, as overheating can lead to reduced lifetime of the converter. Instead, try our Corvette Catalytic Converter Shield or create your own shield using our Floor & Tunnel Shield II™. Note of Caution: Wrap is not designed to be moved or removed after it has been heat cycled. After the fibers have been heated, they lose their initial flexibility. This does not reduce the thermal properties of the exhaust wrap. Be aware of this before you decide to remove the wrap. For this reason, you should avoid wrapping any flex-pipes or flex-joints. Note about Titanium Exhaust Systems: DEI does NOT recommend wrapping exhausts made of titanium. The alloys used in the production of titanium exhaust systems tend to be thin and are designed to dissipate heat quickly. Wrapping any titanium exhaust pipe, regardless of brand, can hold in too much heat, and make the titanium alloy turn brittle and prone to premature cracking. If you are seeking to reduce the heat on a titanium exhaust system, DEI recommends using alternatives such as our flexible heat shields. Direct Heat Resistance: 1800°F Radiant Heat Resistance: 2500°F..
44.78€
Ex Tax:37.32€
Thermal Tape DEI Titanium 2.5cm x 30m (1in x 100ft) DEI 010133 USA-DEI-10133 DEI's ORIGINAL Titanium™ exhaust wrap, with LR Technology, is made from pulverized lava rock, stranded into a fiber material and woven into a proprietary weave. Titanium wrap is engineered to be stronger than most wraps and more durable for improved thermal performance and reliability. Perfect for any automotive or motorcycle application! Withstands 1800˚F direct/2500˚F intermittent heat Promotes increased flow for improved performance Reduces temperature & vibration breakdown Extremely pliable for a tight and secure wrap DEI HT Silicone Coating not required Pre-wetting roll not necessary for wrapping Hi-tech carbon fiber look High resistance to abrasions, oil spills, temperatures and vibration breakdown NOTE: Wrapping of the catalytic converter is not recommended, as overheating can lead to reduced lifetime of the converter. Instead, try our Corvette Catalytic Converter Shield or create your own shield using our Floor & Tunnel Shield II™. Note of Caution: Wrap is not designed to be moved or removed after it has been heat cycled. After the fibers have been heated, they lose their initial flexibility. This does not reduce the thermal properties of the exhaust wrap. Be aware of this before you decide to remove the wrap. For this reason, you should avoid wrapping any flex-pipes or flex-joints. Note about Titanium Exhaust Systems: DEI does NOT recommend wrapping exhausts made of titanium. The alloys used in the production of titanium exhaust systems tend to be thin and are designed to dissipate heat quickly. Wrapping any titanium exhaust pipe, regardless of brand, can hold in too much heat, and make the titanium alloy turn brittle and prone to premature cracking. If you are seeking to reduce the heat on a titanium exhaust system, DEI recommends using alternatives such as our flexible heat shields. Direct Heat Resistance: 1800°F Radiant Heat Resistance: 2500°F..
92.68€
Ex Tax:77.24€
Thermal Tape DEI Titanium 2.5cm x 4.5m (1in x 15ft) DEI 010128 USA-DEI-10128 DEI's ORIGINAL Titanium™ exhaust wrap, with LR Technology, is made from pulverized lava rock, stranded into a fiber material and woven into a proprietary weave. Titanium wrap is engineered to be stronger than most wraps and more durable for improved thermal performance and reliability. Perfect for any automotive or motorcycle application! Withstands 1800˚F direct/2500˚F intermittent heat Promotes increased flow for improved performance Reduces temperature & vibration breakdown Extremely pliable for a tight and secure wrap DEI HT Silicone Coating not required Pre-wetting roll not necessary for wrapping Hi-tech carbon fiber look High resistance to abrasions, oil spills, temperatures and vibration breakdown NOTE: Wrapping of the catalytic converter is not recommended, as overheating can lead to reduced lifetime of the converter. Instead, try our Corvette Catalytic Converter Shield or create your own shield using our Floor & Tunnel Shield II™. Note of Caution: Wrap is not designed to be moved or removed after it has been heat cycled. After the fibers have been heated, they lose their initial flexibility. This does not reduce the thermal properties of the exhaust wrap. Be aware of this before you decide to remove the wrap. For this reason, you should avoid wrapping any flex-pipes or flex-joints. Note about Titanium Exhaust Systems: DEI does NOT recommend wrapping exhausts made of titanium. The alloys used in the production of titanium exhaust systems tend to be thin and are designed to dissipate heat quickly. Wrapping any titanium exhaust pipe, regardless of brand, can hold in too much heat, and make the titanium alloy turn brittle and prone to premature cracking. If you are seeking to reduce the heat on a titanium exhaust system, DEI recommends using alternatives such as our flexible heat shields. Direct Heat Resistance: 1800°F Radiant Heat Resistance: 2500°F..
19.41€
Ex Tax:16.18€
Thermal Tape DEI Titanium 5cm x 10.1m (2in x 33ft) DEI 010125 USA-DEI-10125 DEI's ORIGINAL Titanium™ exhaust wrap, with LR Technology, is made from pulverized lava rock, stranded into a fiber material and woven into a proprietary weave. Titanium wrap is engineered to be stronger than most wraps and more durable for improved thermal performance and reliability. Perfect for any automotive or motorcycle application! Withstands 1800˚F direct/2500˚F intermittent heat Promotes increased flow for improved performance Reduces temperature & vibration breakdown Extremely pliable for a tight and secure wrap DEI HT Silicone Coating not required Pre-wetting roll not necessary for wrapping Hi-tech carbon fiber look High resistance to abrasions, oil spills, temperatures and vibration breakdown NOTE: Wrapping of the catalytic converter is not recommended, as overheating can lead to reduced lifetime of the converter. Instead, try our Corvette Catalytic Converter Shield or create your own shield using our Floor & Tunnel Shield II™. Note of Caution: Wrap is not designed to be moved or removed after it has been heat cycled. After the fibers have been heated, they lose their initial flexibility. This does not reduce the thermal properties of the exhaust wrap. Be aware of this before you decide to remove the wrap. For this reason, you should avoid wrapping any flex-pipes or flex-joints. Note about Titanium Exhaust Systems: DEI does NOT recommend wrapping exhausts made of titanium. The alloys used in the production of titanium exhaust systems tend to be thin and are designed to dissipate heat quickly. Wrapping any titanium exhaust pipe, regardless of brand, can hold in too much heat, and make the titanium alloy turn brittle and prone to premature cracking. If you are seeking to reduce the heat on a titanium exhaust system, DEI recommends using alternatives such as our flexible heat shields. Direct Heat Resistance: 1800°F Radiant Heat Resistance: 2500°F..
47.80€
Ex Tax:39.84€
Thermal Tape DEI Titanium 5cm x 10.6m (2in x 35ft) DEI 010132 USA-DEI-10132 DEI's ORIGINAL Titanium™ exhaust wrap, with LR Technology, is made from pulverized lava rock, stranded into a fiber material and woven into a proprietary weave. Titanium wrap is engineered to be stronger than most wraps and more durable for improved thermal performance and reliability. Perfect for any automotive or motorcycle application! Withstands 1800˚F direct/2500˚F intermittent heat Promotes increased flow for improved performance Reduces temperature & vibration breakdown Extremely pliable for a tight and secure wrap DEI HT Silicone Coating not required Pre-wetting roll not necessary for wrapping Hi-tech carbon fiber look High resistance to abrasions, oil spills, temperatures and vibration breakdown NOTE: Wrapping of the catalytic converter is not recommended, as overheating can lead to reduced lifetime of the converter. Instead, try our Corvette Catalytic Converter Shield or create your own shield using our Floor & Tunnel Shield II™. Note of Caution: Wrap is not designed to be moved or removed after it has been heat cycled. After the fibers have been heated, they lose their initial flexibility. This does not reduce the thermal properties of the exhaust wrap. Be aware of this before you decide to remove the wrap. For this reason, you should avoid wrapping any flex-pipes or flex-joints. Note about Titanium Exhaust Systems: DEI does NOT recommend wrapping exhausts made of titanium. The alloys used in the production of titanium exhaust systems tend to be thin and are designed to dissipate heat quickly. Wrapping any titanium exhaust pipe, regardless of brand, can hold in too much heat, and make the titanium alloy turn brittle and prone to premature cracking. If you are seeking to reduce the heat on a titanium exhaust system, DEI recommends using alternatives such as our flexible heat shields. Direct Heat Resistance: 1800°F Radiant Heat Resistance: 2500°F..
47.80€
Ex Tax:39.84€
Thermal Tape DEI Titanium 5cm x 15m (2in x 50ft) DEI 010127 USA-DEI-10127 DEI's ORIGINAL Titanium™ exhaust wrap, with LR Technology, is made from pulverized lava rock, stranded into a fiber material and woven into a proprietary weave. Titanium wrap is engineered to be stronger than most wraps and more durable for improved thermal performance and reliability. Perfect for any automotive or motorcycle application! Withstands 1800˚F direct/2500˚F intermittent heat Promotes increased flow for improved performance Reduces temperature & vibration breakdown Extremely pliable for a tight and secure wrap DEI HT Silicone Coating not required Pre-wetting roll not necessary for wrapping Hi-tech carbon fiber look High resistance to abrasions, oil spills, temperatures and vibration breakdown NOTE: Wrapping of the catalytic converter is not recommended, as overheating can lead to reduced lifetime of the converter. Instead, try our Corvette Catalytic Converter Shield or create your own shield using our Floor & Tunnel Shield II™. Note of Caution: Wrap is not designed to be moved or removed after it has been heat cycled. After the fibers have been heated, they lose their initial flexibility. This does not reduce the thermal properties of the exhaust wrap. Be aware of this before you decide to remove the wrap. For this reason, you should avoid wrapping any flex-pipes or flex-joints. Note about Titanium Exhaust Systems: DEI does NOT recommend wrapping exhausts made of titanium. The alloys used in the production of titanium exhaust systems tend to be thin and are designed to dissipate heat quickly. Wrapping any titanium exhaust pipe, regardless of brand, can hold in too much heat, and make the titanium alloy turn brittle and prone to premature cracking. If you are seeking to reduce the heat on a titanium exhaust system, DEI recommends using alternatives such as our flexible heat shields. Direct Heat Resistance: 1800°F Radiant Heat Resistance: 2500°F..
77.07€
Ex Tax:64.23€
Thermal Tape DEI Titanium 5cm x 30m (2in x 100ft) DEI 010130 USA-DEI-10130 DEI's ORIGINAL Titanium™ exhaust wrap, with LR Technology, is made from pulverized lava rock, stranded into a fiber material and woven into a proprietary weave. Titanium wrap is engineered to be stronger than most wraps and more durable for improved thermal performance and reliability. Perfect for any automotive or motorcycle application! Withstands 1800˚F direct/2500˚F intermittent heat Promotes increased flow for improved performance Reduces temperature & vibration breakdown Extremely pliable for a tight and secure wrap DEI HT Silicone Coating not required Pre-wetting roll not necessary for wrapping Hi-tech carbon fiber look High resistance to abrasions, oil spills, temperatures and vibration breakdown NOTE: Wrapping of the catalytic converter is not recommended, as overheating can lead to reduced lifetime of the converter. Instead, try our Corvette Catalytic Converter Shield or create your own shield using our Floor & Tunnel Shield II™. Note of Caution: Wrap is not designed to be moved or removed after it has been heat cycled. After the fibers have been heated, they lose their initial flexibility. This does not reduce the thermal properties of the exhaust wrap. Be aware of this before you decide to remove the wrap. For this reason, you should avoid wrapping any flex-pipes or flex-joints. Note about Titanium Exhaust Systems: DEI does NOT recommend wrapping exhausts made of titanium. The alloys used in the production of titanium exhaust systems tend to be thin and are designed to dissipate heat quickly. Wrapping any titanium exhaust pipe, regardless of brand, can hold in too much heat, and make the titanium alloy turn brittle and prone to premature cracking. If you are seeking to reduce the heat on a titanium exhaust system, DEI recommends using alternatives such as our flexible heat shields. Direct Heat Resistance: 1800°F Radiant Heat Resistance: 2500°F..
135.61€
Ex Tax:113.01€
Thermal Tape DEI Titanium 5cm x 4.5m (2in x 15ft) DEI 010129 USA-DEI-10129 DEI's ORIGINAL Titanium™ exhaust wrap, with LR Technology, is made from pulverized lava rock, stranded into a fiber material and woven into a proprietary weave. Titanium wrap is engineered to be stronger than most wraps and more durable for improved thermal performance and reliability. Perfect for any automotive or motorcycle application! Withstands 1800˚F direct/2500˚F intermittent heat Promotes increased flow for improved performance Reduces temperature & vibration breakdown Extremely pliable for a tight and secure wrap DEI HT Silicone Coating not required Pre-wetting roll not necessary for wrapping Hi-tech carbon fiber look High resistance to abrasions, oil spills, temperatures and vibration breakdown NOTE: Wrapping of the catalytic converter is not recommended, as overheating can lead to reduced lifetime of the converter. Instead, try our Corvette Catalytic Converter Shield or create your own shield using our Floor & Tunnel Shield II™. Note of Caution: Wrap is not designed to be moved or removed after it has been heat cycled. After the fibers have been heated, they lose their initial flexibility. This does not reduce the thermal properties of the exhaust wrap. Be aware of this before you decide to remove the wrap. For this reason, you should avoid wrapping any flex-pipes or flex-joints. Note about Titanium Exhaust Systems: DEI does NOT recommend wrapping exhausts made of titanium. The alloys used in the production of titanium exhaust systems tend to be thin and are designed to dissipate heat quickly. Wrapping any titanium exhaust pipe, regardless of brand, can hold in too much heat, and make the titanium alloy turn brittle and prone to premature cracking. If you are seeking to reduce the heat on a titanium exhaust system, DEI recommends using alternatives such as our flexible heat shields. Direct Heat Resistance: 1800°F Radiant Heat Resistance: 2500°F..
24.39€
Ex Tax:20.33€
Thermal Tape DEI Titanium 5cm x 7.5m (2in x 25ft) DEI 010131 USA-DEI-10131 DEI's ORIGINAL Titanium™ exhaust wrap, with LR Technology, is made from pulverized lava rock, stranded into a fiber material and woven into a proprietary weave. Titanium wrap is engineered to be stronger than most wraps and more durable for improved thermal performance and reliability. Perfect for any automotive or motorcycle application! Withstands 1800˚F direct/2500˚F intermittent heat Promotes increased flow for improved performance Reduces temperature & vibration breakdown Extremely pliable for a tight and secure wrap DEI HT Silicone Coating not required Pre-wetting roll not necessary for wrapping Hi-tech carbon fiber look High resistance to abrasions, oil spills, temperatures and vibration breakdown NOTE: Wrapping of the catalytic converter is not recommended, as overheating can lead to reduced lifetime of the converter. Instead, try our Corvette Catalytic Converter Shield or create your own shield using our Floor & Tunnel Shield II™. Note of Caution: Wrap is not designed to be moved or removed after it has been heat cycled. After the fibers have been heated, they lose their initial flexibility. This does not reduce the thermal properties of the exhaust wrap. Be aware of this before you decide to remove the wrap. For this reason, you should avoid wrapping any flex-pipes or flex-joints. Note about Titanium Exhaust Systems: DEI does NOT recommend wrapping exhausts made of titanium. The alloys used in the production of titanium exhaust systems tend to be thin and are designed to dissipate heat quickly. Wrapping any titanium exhaust pipe, regardless of brand, can hold in too much heat, and make the titanium alloy turn brittle and prone to premature cracking. If you are seeking to reduce the heat on a titanium exhaust system, DEI recommends using alternatives such as our flexible heat shields. Direct Heat Resistance: 1800°F Radiant Heat Resistance: 2500°F..
36.00€
Ex Tax:30.00€
