Pedalbox
Reverse Swing Mount Brake and Clutch Pedal - Product Description This swinging mount pedal assembly combines the brake and clutch pedals in one unit with the master cylinders in a reverse position inside the firewall. It features a lightweight aluminum frame, with high strength reinforced I-Beam style forged 6.25:1 ratio pedal arms. The non-skid waffled pedal pads can be laterally adjusted for driver preference or clearance as necessary. The balance bar incorporates a positive detent stop every full turn to maintain adjustment position and driver awareness. A pin and clevis pushrod attachment system provides highest possible degree of misalignment angle for bind free operation through the entire range of travel. The balance bar can be locked in place with the included jam nut, or used with an optional remote cable for quick on-track adjustments. This pedal accepts any Wilwood vertical mount flange single outlet master cylinders that are ordered separately by style and bore size. Pedal Type: Material - Aluminum Finish - Black E-coat Pedal Description: Mount Loc - Swing Mount Facing - Reverse Balance Bar - Yes Mount Length (in) - 12.22 Pedal Ratio & Length: Pedal 1 Ratio - 6.25 to 1 Pedal 2 Ratio - 6.25 to 1 Pedal 1 Length (in) - 11.89 Pedal 2 Length (in) - 11.89..
330.73€
Ex Tax:275.61€
Brake / Clutch and Throttle Pedal - Product Description Wilwood’s new floor mount pedal assembly has a brake / clutch / throttle triple pedal design. There are three individual fabricated steel pedals with non-slip pedal pads to control brake, clutch and throttle. Pedal assembly part number 340-12411 is for front engine cars and includes a throttle bell crank and linkage assembly. This unit features an aluminum frame with strong lightweight fabricated steel pedal arms. The frame and the pedal arms have a black e-coat finish for protection and an attractive appearance. Also included with the pedal assembly are mounting studs, clevises, and balance bar assembly that is designed to provide smooth and accurate settings of the brake pedal bias. The balance bar can be set and locked down with the jam nut, or attached to a remote cable for quick on-track adjustments. The pedal assembly provides a 5.25 to 1 nominal ratio. Additional Pedal Dimensions Mount Length (in) 11.40 Pedal 1 Length (in) 10.66 Pedal 2 Length (in) 10.66 ..
555.12€
Ex Tax:462.60€
Floor Mount Clutch / Brake Pedal - Product Description This floor mount pedal assembly mounts a single brake or clutch master cylinder in a forward position outside the firewall. It features a lightweight aluminum frame, with a high strength reinforced I-Beam style forged 6:1 ratio pedal arm. The non-skid waffled pedal pad can be laterally adjusted for driver preference or clearance as necessary. This pedal accepts any Wilwood vertical mount flange single or tandem outlet master cylinder. Horizontal mount flange master cylinders require an adapter kit. Master cylinders are ordered separately by style and bore size Caution: To use this pedal with a horizontal mount flange tandem outlet master cylinder, order adapter kit part number 250-3677. Caution: Four wheel brake systems require a two circuit, tandem outlet master cylinder. Single outlet master cylinders should not be used for those applications Pedal Type: Material - Aluminum Finish - Black E-coat Pedal Description: Mount Loc - Floor Mount Facing - Forward Balance Bar - No Mount Length (in) - 10.42 Pedal Ratio & Length: Pedal 1 Ratio - 6.0 to 1 Pedal 1 Length (in) - 9.63 Additional Pedal Dimensions Mount Length (in) - 10.42 Pedal 1 Length (in) - 9.63..
121.96€
Ex Tax:101.63€
Reverse Swing Mount Brake and Clutch Pedal This swinging mount pedal assembly combines the brake and clutch pedals in one unit with the master cylinders in a reverse position inside the firewall. It features a lightweight aluminum frame, with high strength reinforced I-Beam style forged 5.1:1 ratio pedal arms. The non-skid waffled pedal pads can be laterally adjusted for driver preference or clearance as necessary. The balance bar incorporates a positive detent stop every full turn to maintain adjustment position and driver awareness. A pin and clevis pushrod attachment system provides highest possible degree of misalignment angle for bind free operation through the entire range of travel. The balance bar can be locked in place with the included jam nut, or used with an optional remote cable for quick on-track adjustments. This pedal accepts any Wilwood vertical mount flange single outlet master cylinders that are ordered separately by style and bore size. Material - Aluminum Finish - Black E-coat Pedal Description Mount Facing - Reverse Balance Bar - Yes Mount Length (in) - 11.02 Pedal 1 Ratio - 5.1 to 1 Pedal 2 Ratio - 5.1 to 1 Pedal 1 Length (in) - 10.14 Pedal 2 Length (in) - 10.14..
330.73€
Ex Tax:275.61€
Showing 1 to 0 of 4 (0 Pages)