Compressor Pulley
The KAVS Motorsport +5% Alternator Pulley is designed to reduce the speed of the alternator when other engine modifications mean it would be spinning faster. Much like it is a good idea to fit a KAVS Motorsport Enlarged Crank Pulley to your engine when you install a smaller supercharger pulley (available from KAVS Motorsport in various sizes), fitting our enlarged Alternator Pulley will mean that the alternator will not have to work as hard when Enlarged Crank Pulleys and smaller supercharger pulleys are installed. The benefits include: - Increased life of your alternator - More BHP; because the design of the pulley allows the belt to work more efficiently with reduced stress - Allows you to run a higher rev limit for more performance The KAVS Motorsport +5% Alternator Pulley is made from steel and finished with a galvanic coat. The product is also useful for owners who want to use their standard OEM belt with our smaller supercharger pulleys around the 11% up to 15% sizes. We here at KAVS Motorsport recommend the +5% Alternator Pulley as a good all-round size. Our custom sized Alternator Pulleys can be useful if you: - Run an extremely small supercharger pulley and would like to slow the alternator down even more - Have a lot of electronic/In Car Entertainment (I.C.E) accessories in your car, and would like to boost the electricity to ensure your accessories run smoothly The KAVS Motorsport Alternator Pulley has the same lifetime warranty that our supercharger pulley does, and still meets all the required standards (ISO 9001:2008 and ISO 14001:2004)...
57.56€
Ex Tax:47.97€
The KAVS Motorsport +10% Alternator Pulley is designed to reduce the speed of the alternator when other engine modifications mean it would be spinning faster. Much like it is a good idea to fit a KAVS Motorsport Enlarged Crank Pulley to your engine when you install a smaller supercharger pulley (available from KAVS Motorsport in various sizes), fitting our enlarged Alternator Pulley will mean that the alternator will not have to work as hard when Enlarged Crank Pulleys and smaller supercharger pulleys are installed. The benefits include: - Increased life of your alternator - More BHP; because the design of the pulley allows the belt to work more efficiently with reduced stress - Allows you to run a higher rev limit for more performance The KAVS Motorsport +10% Alternator Pulley is made from steel and finished with a galvanic coat. The product is also useful for owners who want to use their standard OEM belt with our smaller supercharger pulleys around the 11% up to 15% sizes. Our custom sized Alternator Pulleys can be useful if you: - Run an extremely small supercharger pulley and would like to slow the alternator down even more - Have a lot of electronic/In Car Entertainment (I.C.E) accessories in your car, and would like to boost the electricity to ensure your accessories run smoothly The KAVS Motorsport Alternator Pulley has the same lifetime warranty that our supercharger pulley does, and still meets all the required standards (ISO 9001:2008 and ISO 14001:2004)...
57.56€
Ex Tax:47.97€
The KAVS Motorsport +5% Alternator Pulley is designed to reduce the speed of the alternator when other engine modifications mean it would be spinning faster. Much like it is a good idea to fit a KAVS Motorsport Enlarged Crank Pulley to your engine when you install a smaller supercharger pulley (available from KAVS Motorsport in various sizes), fitting our enlarged Alternator Pulley will mean that the alternator will not have to work as hard when Enlarged Crank Pulleys and smaller supercharger pulleys are installed. The benefits include: - Increased life of your alternator - More BHP; because the design of the pulley allows the belt to work more efficiently with reduced stress - Allows you to run a higher rev limit for more performance The KAVS Motorsport +5% Alternator Pulley is made from steel and finished with a galvanic coat. The product is also useful for owners who want to use their standard OEM belt with our smaller supercharger pulleys around the 11% up to 15% sizes. We here at KAVS Motorsport recommend the +5% Alternator Pulley as a good all-round size. Our custom sized Alternator Pulleys can be useful if you: - Run an extremely small supercharger pulley and would like to slow the alternator down even more - Have a lot of electronic/In Car Entertainment (I.C.E) accessories in your car, and would like to boost the electricity to ensure your accessories run smoothly The KAVS Motorsport Alternator Pulley has the same lifetime warranty that our supercharger pulley does, and still meets all the required standards (ISO 9001:2008 and ISO 14001:2004)...
57.56€
Ex Tax:47.97€
The Gates compressor belt is a product of very high durability and highest quality. It is perfectly matched to the KAVS Motorsport tuned compressor wheels also available in our offer. Suitable for 11-15% compressor wheels..
26.59€
Ex Tax:22.15€
The Gates compressor belt is a product of very high durability and highest quality. It is perfectly matched to the KAVS Motorsport tuned compressor wheels also available in our offer. Suitable for 16-17% compressor wheels..
26.59€
Ex Tax:22.15€
The Gates compressor belt is a product of very high durability and highest quality. It is perfectly matched to the KAVS Motorsport tuned compressor wheels also available in our offer. Suitable for 18-20% compressor wheels..
26.59€
Ex Tax:22.15€
The KAVS Motorsport reduced supercharger pulley is available in various sizes. The aluminum compressor pulley with stainless steel inside gives the compressor more rotational speed, so that more air enters the cylinder. Dimension: 11% - 58,0mm 15% pulley, it is 15% smaller in circumference and therefore gives 15% more revolutions to the compressor.This allows more power to be programmed.The software and pulley belt must be adjusted after installation...
135.61€
Ex Tax:113.01€
The KAVS Motorsport reduced supercharger pulley is available in various sizes. The aluminum compressor pulley with stainless steel inside gives the compressor more rotational speed, so that more air enters the cylinder. Dimension: 13% - 57,0mm 15% pulley, it is 15% smaller in circumference and therefore gives 15% more revolutions to the compressor.This allows more power to be programmed.The software and pulley belt must be adjusted after installation...
135.61€
Ex Tax:113.01€
The KAVS Motorsport reduced supercharger pulley is available in various sizes. The aluminum compressor pulley with stainless steel inside gives the compressor more rotational speed, so that more air enters the cylinder. Dimension: 15% (55,5 mm) 15% pulley, it is 15% smaller in circumference and therefore gives 15% more revolutions to the compressor.This allows more power to be programmed.The software and pulley belt must be adjusted after installation...
135.61€
Ex Tax:113.01€
The KAVS Motorsport reduced supercharger pulley is available in various sizes. The aluminum compressor pulley with stainless steel inside gives the compressor more rotational speed, so that more air enters the cylinder. Dimension: 16% - 55,0mm 15% pulley, it is 15% smaller in circumference and therefore gives 15% more revolutions to the compressor.This allows more power to be programmed.The software and pulley belt must be adjusted after installation...
135.61€
Ex Tax:113.01€
The KAVS Motorsport reduced supercharger pulley is available in various sizes. The aluminum compressor pulley with stainless steel inside gives the compressor more rotational speed, so that more air enters the cylinder. Dimension: 14% - 56,5mm 15% pulley, it is 15% smaller in circumference and therefore gives 15% more revolutions to the compressor.This allows more power to be programmed.The software and pulley belt must be adjusted after installation...
135.61€
Ex Tax:113.01€
The KAVS Motorsport reduced supercharger pulley is available in various sizes. The aluminum compressor pulley with stainless steel inside gives the compressor more rotational speed, so that more air enters the cylinder. Dimension: 17% - 54,5mm 15% pulley, it is 15% smaller in circumference and therefore gives 15% more revolutions to the compressor.This allows more power to be programmed.The software and pulley belt must be adjusted after installation...
135.61€
Ex Tax:113.01€
The KAVS Motorsport reduced supercharger pulley is available in various sizes. The aluminum compressor pulley with stainless steel inside gives the compressor more rotational speed, so that more air enters the cylinder. Dimension: 18% - 53,8mm 15% pulley, it is 15% smaller in circumference and therefore gives 15% more revolutions to the compressor.This allows more power to be programmed.The software and pulley belt must be adjusted after installation...
135.61€
Ex Tax:113.01€
The KAVS Motorsport reduced supercharger pulley is available in various sizes. The aluminum compressor pulley with stainless steel inside gives the compressor more rotational speed, so that more air enters the cylinder. Dimension: 19% - 53,0mm 15% pulley, it is 15% smaller in circumference and therefore gives 15% more revolutions to the compressor.This allows more power to be programmed.The software and pulley belt must be adjusted after installation...
135.61€
Ex Tax:113.01€
The KAVS Motorsport reduced supercharger pulley is available in various sizes. The aluminum compressor pulley with stainless steel inside gives the compressor more rotational speed, so that more air enters the cylinder. Dimension: 20% - 52,5mm 15% pulley, it is 15% smaller in circumference and therefore gives 15% more revolutions to the compressor.This allows more power to be programmed.The software and pulley belt must be adjusted after installation...
135.61€
Ex Tax:113.01€
Fits to Audi with 3.0 TFSI V6 Supercharged engines Wheel diameter - 57mm Engine revs - 6950 Supercharger revs - 16456 Estimated power - 450HP after chiptuning and dyno..
135.61€
Ex Tax:113.01€
Lightweight Crankshaft Pulley Mini Cooper S 139mm Make:MINI Engine:1.6 Supercharged Found In:Cooper S (R53 Hardtop 2002-2006, R52 Convertible 2005-2008) Sizes available:139mm (0%), 140mm, 141mm, 142mm (+2%) The KAVS Motorsport Lightweight Crankshaft Pulley is a fantastic addition to your R52/R53 Cooper S, whether or not you’re already reaping the benefit of one of our Reduced Supercharger Pulleys or Enlarged Alternator Pulleys. Our Lightweight Crankshaft Pulleys are forged, solid units; far superior to weaker, machine cut pulleys, as offered by our competitors, which can be prone to failure. The last supercharged Cooper S rolled off the production line in 2008; meaning that many of these cars are getting on; many of which are already over a decade old. A common problem due to aging is that the rubber starts to fail, severely reducing the reliability of your engine. We therefore offer a 139mm diameter pulley designed to replace your stock, OEM unit from the factory and, in addition, 140mm, 141mm and 142mm pulleys, offering up to a 2% enlargement over the standard size. Weights range between 550g and 600g depending on the size. Why do we offer larger pulleys over standard? As you reduce the size of your supercharger pulley, seeking higher performance, you increase the demands on your crankshaft; spinning it faster than its usual operating speed. By enlarging the size of the crankshaft pulley, you allow the engine to work at its normal pace, reducing the rotating mass within the engine, while still delivering the higher boost you have gained by introducing a smaller supercharger pulley to the powertrain. The end result is more reliability, reduced engine drag, higher horsepower and torque figures; with more efficient power delivery. To truly enhance the power and efficiency of your MINI’s engine, combine all three of our pulleys; KAVS Motorsport Reduced Supercharger Pulley KAVS Motorsport Lightweight and Enlarged Crankshaft Pulley KAVS Motorsport Lightweight and Enlarged Alternator Pulley..
145.37€
Ex Tax:121.14€
Lightweight Crankshaft Pulley Mini Cooper S 142mm Make:MINI Engine:1.6 Supercharged Found In:Cooper S (R53 Hardtop 2002-2006, R52 Convertible 2005-2008) Sizes available:139mm (0%), 140mm, 141mm, 142mm (+2%) The KAVS Motorsport Lightweight Crankshaft Pulley is a fantastic addition to your R52/R53 Cooper S, whether or not you’re already reaping the benefit of one of our Reduced Supercharger Pulleys or Enlarged Alternator Pulleys. Our Lightweight Crankshaft Pulleys are forged, solid units; far superior to weaker, machine cut pulleys, as offered by our competitors, which can be prone to failure. The last supercharged Cooper S rolled off the production line in 2008; meaning that many of these cars are getting on; many of which are already over a decade old. A common problem due to aging is that the rubber starts to fail, severely reducing the reliability of your engine. We therefore offer a 139mm diameter pulley designed to replace your stock, OEM unit from the factory and, in addition, 140mm, 141mm and 142mm pulleys, offering up to a 2% enlargement over the standard size. Weights range between 550g and 600g depending on the size. Why do we offer larger pulleys over standard? As you reduce the size of your supercharger pulley, seeking higher performance, you increase the demands on your crankshaft; spinning it faster than its usual operating speed. By enlarging the size of the crankshaft pulley, you allow the engine to work at its normal pace, reducing the rotating mass within the engine, while still delivering the higher boost you have gained by introducing a smaller supercharger pulley to the powertrain. The end result is more reliability, reduced engine drag, higher horsepower and torque figures; with more efficient power delivery. To truly enhance the power and efficiency of your MINI’s engine, combine all three of our pulleys; KAVS Motorsport Reduced Supercharger Pulley KAVS Motorsport Lightweight and Enlarged Crankshaft Pulley KAVS Motorsport Lightweight and Enlarged Alternator Pulley..
145.37€
Ex Tax:121.14€
For those who want a stealth look of their tuned engine we developed a 1-piece interference fit supercharger pulley in most popular dimensions: 11%, 15%, 17% and 19% size. The power gains are the same as with our 2-piece design pulley, but the car will look original when you look under the hood. As many people want to revert to standard settings before selling their car, we developed the standard 0% pulley which looks and works as the standard pulley in your car. Please note that these are 1-piece interference fit pulleys, and need to be heated to approx 350-400°C before fitting onto the supercharger. We recommend that this product is installed by a professional garage or by a professional mechanic to avoid any potential damage to your supercharger...
102.44€
Ex Tax:85.37€
For those who want a stealth look of their tuned engine we developed a 1-piece interference fit supercharger pulley in most popular dimensions: 11%, 15%, 17% and 19% size. The power gains are the same as with our 2-piece design pulley, but the car will look original when you look under the hood. As many people want to revert to standard settings before selling their car, we developed the standard 0% pulley which looks and works as the standard pulley in your car. Please note that these are 1-piece interference fit pulleys, and need to be heated to approx 350-400°C before fitting onto the supercharger. We recommend that this product is installed by a professional garage or by a professional mechanic to avoid any potential damage to your supercharger...
102.44€
Ex Tax:85.37€