Thermal insulation
DEI Hoodliner Insulation Kits are custom cut kits made from our Black Under Hood™ material. It controls engine heat and noise that is often a problem with today’s modified vehicles packed with high performance components. These pre-cut hood insulation kits are the perfect replacement for your worn out, dirty hood liner, while protecting your paint from engine heat and chemicals. Each kit is custom CNC cut and has an aggressive adhesive backing, making for an easy installation. Replacement for dirty worn out hood liners Black textured finish Cooler hood surfaces protects your paint Reduced engine noise for quieter passenger compartment Easy peel & stick installation CNC cut for a precise fit..
67.32€
Ex Tax:56.10€
DEI Hoodliner Insulation Kits are custom cut kits made from our Black Under Hood™ material. It controls engine heat and noise that is often a problem with today’s modified vehicles packed with high performance components. These pre-cut hood insulation kits are the perfect replacement for your worn out, dirty hood liner, while protecting your paint from engine heat and chemicals. Each kit is custom CNC cut and has an aggressive adhesive backing, making for an easy installation. Replacement for dirty worn out hood liners Black textured finish Cooler hood surfaces protects your paint Reduced engine noise for quieter passenger compartment Easy peel & stick installation CNC cut for a precise fit..
67.32€
Ex Tax:56.10€
DEI Hoodliner Insulation Kits are custom cut kits made from our Black Under Hood™ material. It controls engine heat and noise that is often a problem with today’s modified vehicles packed with high performance components. These pre-cut hood insulation kits are the perfect replacement for your worn out, dirty hood liner, while protecting your paint from engine heat and chemicals. Each kit is custom CNC cut and has an aggressive adhesive backing, making for an easy installation. Replacement for dirty worn out hood liners Black textured finish Cooler hood surfaces protects your paint Reduced engine noise for quieter passenger compartment Easy peel & stick installation CNC cut for a precise fit..
50.73€
Ex Tax:42.28€
A material used for acoustic and thermal isolation, as well as protection against vibrations. Product tested by the Industrial Motorization Institute. APPLICATION: acoustic and thermal isolation for ventilation, refrigeration, heating and sanitary installations soundproofing of engine compartment, bonnet, wheel arches, floors and luggage compartments, machine housing vibration reduction BENEFITS: noise reduction thermal isolation resistance to increased temperature flexibility does not absorb water does not spread fire antibacterial coating harmless for people and the environment Width: 1000 mm; Length: 1000 mm; Thickness: 13mm; Self-adhesive; Maximum quantity per package: 16mb; The price is for 1 m...
26.59€
Ex Tax:22.15€
A material used for acoustic and thermal isolation, as well as protection against vibrations. Product tested by the Industrial Motorization Institute. APPLICATION: acoustic and thermal isolation for ventilation, refrigeration, heating and sanitary installations soundproofing of engine compartment, bonnet, wheel arches, floors and luggage compartments, machine housing vibration reduction BENEFITS: noise reduction thermal isolation resistance to increased temperature flexibility does not absorb water does not spread fire antibacterial coating harmless for people and the environment aluminium layer additionally isolating from the heat source Width: 1000 mm Length: 1000 mm Thickness: 13 mm Self-adhesive; Maximum quantity per package: 16mb The price is for 1 m...
43.66€
Ex Tax:36.38€
A material used for acoustic and thermal isolation, as well as protection against vibrations. Product tested by the Industrial Motorization Institute. APPLICATION: acoustic and thermal isolation for ventilation, refrigeration, heating and sanitary installations soundproofing of engine compartment, bonnet, wheel arches, floors and luggage compartments, machine housing vibration reduction BENEFITS: noise reduction thermal isolation resistance to increased temperature flexibility does not absorb water does not spread fire antibacterial coating harmless for people and the environment Width: 1000 mm; Length: 1000 mm; Thickness: 19mm; Self-adhesive; Maximum quantity per package: 16mb; The price is for 1 m...
32.93€
Ex Tax:27.44€
A material used for acoustic and thermal isolation, as well as protection against vibrations. Product tested by the Industrial Motorization Institute. APPLICATION: acoustic and thermal isolation for ventilation, refrigeration, heating and sanitary installations soundproofing of engine compartment, bonnet, wheel arches, floors and luggage compartments, machine housing vibration reduction BENEFITS: noise reduction thermal isolation resistance to increased temperature flexibility does not absorb water does not spread fire antibacterial coating harmless for people and the environment aluminium layer additionally isolating from the heat source Width: 1000 mm Length: 1000 mm Thickness: 19 mm Self-adhesive; Maximum quantity per package: 16mb The price is for 1 m...
47.56€
Ex Tax:39.63€
A material used for acoustic and thermal isolation, as well as protection against vibrations. Product tested by the Industrial Motorization Institute. APPLICATION: acoustic and thermal isolation for ventilation, refrigeration, heating and sanitary installations soundproofing of engine compartment, bonnet, wheel arches, floors and luggage compartments, machine housing vibration reduction BENEFITS: noise reduction thermal isolation resistance to increased temperature flexibility does not absorb water does not spread fire antibacterial coating harmless for people and the environment Width: 1000 mm; Length: 1000 mm; Thickness: 25mm; Self-adhesive; Maximum quantity per package: 16mb; The price is for 1 m...
37.80€
Ex Tax:31.50€
A material used for acoustic and thermal isolation, as well as protection against vibrations. Product tested by the Industrial Motorization Institute. APPLICATION: acoustic and thermal isolation for ventilation, refrigeration, heating and sanitary installations soundproofing of engine compartment, bonnet, wheel arches, floors and luggage compartments, machine housing vibration reduction BENEFITS: noise reduction thermal isolation resistance to increased temperature flexibility does not absorb water does not spread fire antibacterial coating harmless for people and the environment aluminium layer additionally isolating from the heat source Width: 1000 mm Length: 1000 mm Thickness: 25 mm Self-adhesive; Maximum quantity per package: 16mb The price is for 1 m...
53.41€
Ex Tax:44.51€
A material used for acoustic and thermal isolation, as well as protection against vibrations. Product tested by the Industrial Motorization Institute. APPLICATION: acoustic and thermal isolation for ventilation, refrigeration, heating and sanitary installations soundproofing of engine compartment, bonnet, wheel arches, floors and luggage compartments, machine housing vibration reduction BENEFITS: noise reduction thermal isolation resistance to increased temperature flexibility does not absorb water does not spread fire antibacterial coating harmless for people and the environment Width: 1000 mm; Length: 1000 mm; Thickness: 6 mm; Self-adhesive; Maximum quantity per package: 16mb; The price is for 1 m...
20.73€
Ex Tax:17.28€
A material used for acoustic and thermal isolation, as well as protection against vibrations. Product tested by the Industrial Motorization Institute. APPLICATION: acoustic and thermal isolation for ventilation, refrigeration, heating and sanitary installations soundproofing of engine compartment, bonnet, wheel arches, floors and luggage compartments, machine housing vibration reduction BENEFITS: noise reduction thermal isolation resistance to increased temperature flexibility does not absorb water does not spread fire antibacterial coating harmless for people and the environment Width: 1000 mm; Length: 1000 mm; Thickness: 9mm; Self-adhesive; Maximum quantity per package: 16mb; The price is for 1 m...
23.17€
Ex Tax:19.31€
Floor & Tunnel Shield II DEI (Non-Adhesive) 50cm x 120cm (21" x 48") DEI 50552 USA-DEI-50552 New Black Floor & Tunnel Shield solves the problem of blocking engine and exhaust heat while wanting a great, flexible, black finish. With a proprietary high temperature black coating, Black Floor & Tunnel Shield controls heat from getting into interiors and protects components from damage. Aggressive adhesive backing makes installation easy. Flexible - easily shapes to firewalls, trans tunnels, floors, and more. Constructed with an embossed 10 mil aluminum face bonded to 1/8" composite glass-fiber core and backed with a high temp super strong pressure sensitive backing, Floor & Tunnel Shield II withstands up to 1750°F. The adhesive side holds past 450°F. Proprietary high temperature black coating Wind & water will not affect adhesive Minimum clearance required, only 3/16” thick Easily shape, trim, peel & stick Aggressive self-adhesive backing *DO NOT apply directly to exhaust components. Backing: Adhesive Direct Heat Resistance: 1750°F..
151.22€
Ex Tax:126.02€
Floor & Tunnel Shield II DEI (Non-Adhesive) 107cm x 120cm (42" x 48") DEI 50520 USA-DEI-50520 New Black Floor & Tunnel Shield solves the problem of blocking engine and exhaust heat while wanting a great, flexible, black finish. With a proprietary high temperature black coating, Black Floor & Tunnel Shield controls heat from getting into interiors and protects components from damage. Aggressive adhesive backing makes installation easy. Flexible - easily shapes to firewalls, trans tunnels, floors, and more. Constructed with an embossed 10 mil aluminum face bonded to 1/8" composite glass-fiber core and backed with a high temp super strong pressure sensitive backing, Floor & Tunnel Shield II withstands up to 1750°F. The adhesive side holds past 450°F. Proprietary high temperature black coating Wind & water will not affect adhesive Minimum clearance required, only 3/16” thick Easily shape, trim, peel & stick Aggressive self-adhesive backing *DO NOT apply directly to exhaust components. Backing: Adhesive Direct Heat Resistance: 1750°F..
268.29€
Ex Tax:223.58€
Black Glass Fiber Exhaust Wrap 2.5cm x 15m (1" x 50ft) DEI 010107 USA-DEI-10107 An important first step in reducing unwanted and power-robbing under hood heat is wrapping headers and down pipes. Less under hood radiant heat results in a cooler air charge for improved performance and keeping exhaust gases hotter within the exhaust system helps in decreasing exhaust density & increases exhaust flow. Design Engineering Stainless Steel Locking Ties are the perfect way to fasten exhaust wrap for a easy, clean and professional installation. Reduce under hood temperatures a realistic 50% Decreases exhaust density & increases exhaust flow Improves horsepower Withstands 1200°F direct/2000°F radiant Only exhaust wrap with installation guide lines Added durability and heat retention NOTE: Design Engineering HT Silicone Coating spray is highly recommended for DEI glass fiber wrap to penetrate, seal, protect and prolong the lifespan of exhaust wrap. NOTE: Wrapping of the catalytic converter is not recommended, as overheating can lead to reduced lifetime of the converter. Instead, try our Corvette Catalytic Converter Shield or create your own shield using our Floor & Tunnel Shield II™. Note of Caution: Wrap is not designed to be moved or removed after it has been heat cycled. After the fibers have been heated, they lose their initial flexibility. This does not reduce the thermal properties of the exhaust wrap. Be aware of this before you decide to remove the wrap. For this reason, you should avoid wrapping any flex-pipes or flex-joints. Note about Titanium Exhaust Systems: DEI does NOT recommend wrapping exhausts made of titanium. The alloys used in the production of titanium exhaust systems tend to be thin and are designed to dissipate heat quickly. Wrapping any titanium exhaust pipe, regardless of brand, can hold in too much heat, and make the titanium alloy turn brittle and prone to premature cracking. If you are seeking to reduce the heat on a titanium exhaust system, DEI recommends using alternatives such as our flexible heat shields. Direct Heat Resistance: 1200°F Radiant Heat Resistance: 2000°F..
43.90€
Ex Tax:36.59€
Black Glass Fiber Exhaust Wrap 2.5cm x 30m (1" x 100ft) DEI 010118 USA-DEI-10118 An important first step in reducing unwanted and power-robbing under hood heat is wrapping headers and down pipes. Less under hood radiant heat results in a cooler air charge for improved performance and keeping exhaust gases hotter within the exhaust system helps in decreasing exhaust density & increases exhaust flow. Design Engineering Stainless Steel Locking Ties are the perfect way to fasten exhaust wrap for a easy, clean and professional installation. Reduce under hood temperatures a realistic 50% Decreases exhaust density & increases exhaust flow Improves horsepower Withstands 1200°F direct/2000°F radiant Only exhaust wrap with installation guide lines Added durability and heat retention NOTE: Design Engineering HT Silicone Coating spray is highly recommended for DEI glass fiber wrap to penetrate, seal, protect and prolong the lifespan of exhaust wrap. NOTE: Wrapping of the catalytic converter is not recommended, as overheating can lead to reduced lifetime of the converter. Instead, try our Corvette Catalytic Converter Shield or create your own shield using our Floor & Tunnel Shield II™. Note of Caution: Wrap is not designed to be moved or removed after it has been heat cycled. After the fibers have been heated, they lose their initial flexibility. This does not reduce the thermal properties of the exhaust wrap. Be aware of this before you decide to remove the wrap. For this reason, you should avoid wrapping any flex-pipes or flex-joints. Note about Titanium Exhaust Systems: DEI does NOT recommend wrapping exhausts made of titanium. The alloys used in the production of titanium exhaust systems tend to be thin and are designed to dissipate heat quickly. Wrapping any titanium exhaust pipe, regardless of brand, can hold in too much heat, and make the titanium alloy turn brittle and prone to premature cracking. If you are seeking to reduce the heat on a titanium exhaust system, DEI recommends using alternatives such as our flexible heat shields. Direct Heat Resistance: 1200°F Radiant Heat Resistance: 2000°F..
96.59€
Ex Tax:80.49€
Black Glass Fiber Exhaust Wrap 5cm x 15m (2" x 50ft) DEI 010108 USA-DEI-10108 An important first step in reducing unwanted and power-robbing under hood heat is wrapping headers and down pipes. Less under hood radiant heat results in a cooler air charge for improved performance and keeping exhaust gases hotter within the exhaust system helps in decreasing exhaust density & increases exhaust flow. Design Engineering Stainless Steel Locking Ties are the perfect way to fasten exhaust wrap for a easy, clean and professional installation. Reduce under hood temperatures a realistic 50% Decreases exhaust density & increases exhaust flow Improves horsepower Withstands 1200°F direct/2000°F radiant Only exhaust wrap with installation guide lines Added durability and heat retention NOTE: Design Engineering HT Silicone Coating spray is highly recommended for DEI glass fiber wrap to penetrate, seal, protect and prolong the lifespan of exhaust wrap. NOTE: Wrapping of the catalytic converter is not recommended, as overheating can lead to reduced lifetime of the converter. Instead, try our Corvette Catalytic Converter Shield or create your own shield using our Floor & Tunnel Shield II™. Note of Caution: Wrap is not designed to be moved or removed after it has been heat cycled. After the fibers have been heated, they lose their initial flexibility. This does not reduce the thermal properties of the exhaust wrap. Be aware of this before you decide to remove the wrap. For this reason, you should avoid wrapping any flex-pipes or flex-joints. Note about Titanium Exhaust Systems: DEI does NOT recommend wrapping exhausts made of titanium. The alloys used in the production of titanium exhaust systems tend to be thin and are designed to dissipate heat quickly. Wrapping any titanium exhaust pipe, regardless of brand, can hold in too much heat, and make the titanium alloy turn brittle and prone to premature cracking. If you are seeking to reduce the heat on a titanium exhaust system, DEI recommends using alternatives such as our flexible heat shields. Direct Heat Resistance: 1200°F Radiant Heat Resistance: 2000°F..
77.07€
Ex Tax:64.23€
Black Glass Fiber Exhaust Wrap 8in x 100ft (20cm x 30.5m) DEI 010085 USA-DEI-10085 Wrapping headers and down pipes is an important first step in reducing unwanted and power-robbing under hood heat. Less under hood heat results in a cooler air charge for improved performance and keeping exhaust gases hotter within the exhaust system helps in decreasing exhaust density & increases exhaust flow. Design Engineering Stainless Steel Locking Ties are the perfect way to fasten exhaust wrap for a easy, clean and professional installation. Reduce under hood temperatures a realistic 50% Decreases exhaust density & increases exhaust flow Improves horsepower Withstands 1200°F direct/2000°F radiant Only exhaust wrap with installation guide lines Added durability and heat retention NOTE: Design Engineering HT Silicone Coating spray is highly recommended for DEI glass fiber wrap to penetrate, seal, protect and prolong the lifespan of exhaust wrap. NOTE: Wrapping of the catalytic converter is not recommended, as overheating can lead to reduced lifetime of the converter. Instead, try our Corvette Catalytic Converter Shield or create your own shield using our Floor & Tunnel Shield II™. Note of Caution: Wrap is not designed to be moved or removed after it has been heat cycled. After the fibers have been heated, they lose their initial flexibility. This does not reduce the thermal properties of the exhaust wrap. Be aware of this before you decide to remove the wrap. For this reason, you should avoid wrapping any flex-pipes or flex-joints. Note about Titanium Exhaust Systems: DEI does NOT recommend wrapping exhausts made of titanium. The alloys used in the production of titanium exhaust systems tend to be thin and are designed to dissipate heat quickly. Wrapping any titanium exhaust pipe, regardless of brand, can hold in too much heat, and make the titanium alloy turn brittle and prone to premature cracking. If you are seeking to reduce the heat on a titanium exhaust system, DEI recommends using alternatives such as our flexible heat shields. Direct Heat Resistance: 1200°F Radiant Heat Resistance: 2000°F..
336.59€
Ex Tax:280.49€
Black Glass Fiber Exhaust Wrap DEI 50mm x 7,5m (2in x 25ft) DEI 010099 USA-DEI-10099 Wrapping headers and down pipes is an important first step in reducing unwanted and power-robbing under hood heat. Less under hood heat results in a cooler air charge for improved performance and keeping exhaust gases hotter within the exhaust system helps in decreasing exhaust density & increases exhaust flow. Design Engineering Stainless Steel Locking Ties are the perfect way to fasten exhaust wrap for a easy, clean and professional installation. Reduce under hood temperatures a realistic 50% Decreases exhaust density & increases exhaust flow Improves horsepower Withstands 1200°F direct/2000°F radiant Only exhaust wrap with installation guide lines Added durability and heat retention NOTE: Design Engineering HT Silicone Coating spray is highly recommended for DEI glass fiber wrap to penetrate, seal, protect and prolong the lifespan of exhaust wrap. NOTE: Wrapping of the catalytic converter is not recommended, as overheating can lead to reduced lifetime of the converter. Instead, try our Corvette Catalytic Converter Shield or create your own shield using our Floor & Tunnel Shield II™. Note of Caution: Wrap is not designed to be moved or removed after it has been heat cycled. After the fibers have been heated, they lose their initial flexibility. This does not reduce the thermal properties of the exhaust wrap. Be aware of this before you decide to remove the wrap. For this reason, you should avoid wrapping any flex-pipes or flex-joints. Note about Titanium Exhaust Systems: DEI does NOT recommend wrapping exhausts made of titanium. The alloys used in the production of titanium exhaust systems tend to be thin and are designed to dissipate heat quickly. Wrapping any titanium exhaust pipe, regardless of brand, can hold in too much heat, and make the titanium alloy turn brittle and prone to premature cracking. If you are seeking to reduce the heat on a titanium exhaust system, DEI recommends using alternatives such as our flexible heat shields. Direct Heat Resistance: 1200°F Radiant Heat Resistance: 2000°F..
28.29€
Ex Tax:23.58€
FMIC black thermal insulation tape, made of high quality Thermo-Reflex material and adhesive resistant to high temperatures. It works perfectly in the most extreme conditions, and thanks to the excellent heat reflection it's widely used in motorsport - used in the engine compartment, for insulation of e.g. floors from the exhaust, etc. Size: 51x51cm ..
58.30€
Ex Tax:48.58€
Black Titanium Exhaust Wrap 2in x 100ft (5cm x 30m) DEI 010002 USA-DEI-10002 Black Titanium Exhaust Wrap, with LR Technology, is made from pulverized lava rock, stranded into a fiber material then woven into a proprietary weave. Black Titanium wrap is engineered to be stronger than most wraps and more durable for improved thermal performance and reliability. Designed to be pliable and resistant to chemical oil spills and vibration breakdown; it secures tightly without pre-wetting and is able to withstand direct heat up to 1800°F and intermittent heat up to 2500°F. Like the original Titanium Wrap, DEI’s Black Titanium Wrap maximizes horsepower and performance by reducing underhood temperatures and maintaining high exhaust gas velocity. Wrapped headers and exhaust also reduces the incidence of heat soak, can prevent harmful burns, protect heat sensitive underhood components, and reduce the level of heat transmitted through the firewall and floor of the vehicle for a more comfortable interior. Black carbon fiber look Extremely pliable for a tight & secure wrap Withstands 1800˚F direct / 2500˚F intermittent heat Pre-wetting roll not necessary for wrapping Reduce underhood temps..
135.61€
Ex Tax:113.01€
Black Titanium Exhaust Wrap 2in x 15ft (5cm x 4,5m) DEI 010005 USA-DEI-10005 Black Titanium Exhaust Wrap, with LR Technology, is made from pulverized lava rock, stranded into a fiber material then woven into a proprietary weave. Black Titanium wrap is engineered to be stronger than most wraps and more durable for improved thermal performance and reliability. Designed to be pliable and resistant to chemical oil spills and vibration breakdown; it secures tightly without pre-wetting and is able to withstand direct heat up to 1800°F and intermittent heat up to 2500°F. Like the original Titanium Wrap, DEI’s Black Titanium Wrap maximizes horsepower and performance by reducing underhood temperatures and maintaining high exhaust gas velocity. Wrapped headers and exhaust also reduces the incidence of heat soak, can prevent harmful burns, protect heat sensitive underhood components, and reduce the level of heat transmitted through the firewall and floor of the vehicle for a more comfortable interior. Black carbon fiber look Extremely pliable for a tight & secure wrap Withstands 1800˚F direct / 2500˚F intermittent heat Pre-wetting roll not necessary for wrapping Reduce underhood temps..
26.34€
Ex Tax:21.95€
Black Titanium Exhaust Wrap 2in x 25ft (5cm x 7,5m) DEI 010004 USA-DEI-10004 Black Titanium Exhaust Wrap, with LR Technology, is made from pulverized lava rock, stranded into a fiber material then woven into a proprietary weave. Black Titanium wrap is engineered to be stronger than most wraps and more durable for improved thermal performance and reliability. Designed to be pliable and resistant to chemical oil spills and vibration breakdown; it secures tightly without pre-wetting and is able to withstand direct heat up to 1800°F and intermittent heat up to 2500°F. Like the original Titanium Wrap, DEI’s Black Titanium Wrap maximizes horsepower and performance by reducing underhood temperatures and maintaining high exhaust gas velocity. Wrapped headers and exhaust also reduces the incidence of heat soak, can prevent harmful burns, protect heat sensitive underhood components, and reduce the level of heat transmitted through the firewall and floor of the vehicle for a more comfortable interior. Black carbon fiber look Extremely pliable for a tight & secure wrap Withstands 1800˚F direct / 2500˚F intermittent heat Pre-wetting roll not necessary for wrapping Reduce underhood temps..
38.05€
Ex Tax:31.71€
Black Titanium Exhaust Wrap 2in x 50ft (5cm x 15m) DEI 010003 USA-DEI-10003 Black Titanium Exhaust Wrap, with LR Technology, is made from pulverized lava rock, stranded into a fiber material then woven into a proprietary weave. Black Titanium wrap is engineered to be stronger than most wraps and more durable for improved thermal performance and reliability. Designed to be pliable and resistant to chemical oil spills and vibration breakdown; it secures tightly without pre-wetting and is able to withstand direct heat up to 1800°F and intermittent heat up to 2500°F. Like the original Titanium Wrap, DEI’s Black Titanium Wrap maximizes horsepower and performance by reducing underhood temperatures and maintaining high exhaust gas velocity. Wrapped headers and exhaust also reduces the incidence of heat soak, can prevent harmful burns, protect heat sensitive underhood components, and reduce the level of heat transmitted through the firewall and floor of the vehicle for a more comfortable interior. Black carbon fiber look Extremely pliable for a tight & secure wrap Withstands 1800˚F direct / 2500˚F intermittent heat Pre-wetting roll not necessary for wrapping Reduce underhood temps..
73.18€
Ex Tax:60.98€
Chill Charger 16FL OZ. DEI 040208 USA-DEI-40208 Chill Charger for water-to-air intercoolers maximizes thermal transfer to lower air intake temperatures while also protecting core corrosion, electrolysis and harmful mineral build up. By effectively transferring water that circulates through the intercooler Chill Charger reduces liquid heat soak in high performance turbo and supercharger systems. ..
13.17€
Ex Tax:10.98€
Cool Tape - 2in x 18m roll Heat Reflective Tape DEI 010413 USA-DEI-10413 Cool Tape™ is a flexible and super strong self-adhesive thermal insulating tape capable of protecting up to 2000°F of radiant heat. Made of one mil aluminized material bonded to a woven glass fiber heat resistant matting, Cool Tape™ is a ultra light weight heat reflective solution for wrapping wires, cables, hoses, fuel lines, covering seams and many other uses. Withstands direct heat up to 400°F Use to secure panels, seal air boxes, wrap wiring & more Strong self-adhesive backing Perfect for giving Reflect-A-Cool, Heat Screen and Floor & Tunnel Shield II a finished edge look! Direct Heat Resistance: 400°F Radiant Heat Resistance: 2000°F..
84.88€
Ex Tax:70.73€
Cool Tape 1.5in x 9,1m roll Heat Reflective Tape DEI 010416 USA-DEI-10416 Cool Tape™ is a flexible and super strong self-adhesive thermal insulating tape capable of protecting up to 2000°F of radiant heat. Made of one mil aluminized material bonded to a woven glass fiber heat resistant matting, Cool Tape™ is a ultra light weight heat reflective solution for wrapping wires, cables, hoses, fuel lines, covering seams and many other uses. Withstands direct heat up to 400°F Use to secure panels, seal air boxes, wrap wiring & more Strong self-adhesive backing Perfect for giving Reflect-A-Cool, Heat Screen and Floor & Tunnel Shield II a finished edge look! Direct Heat Resistance: 400°F Radiant Heat Resistance: 2000°F..
38.05€
Ex Tax:31.71€
Cool Tape 2in x 9,1m roll Heat Reflective Tape DEI 010468 USA-DEI-10468 Cool Tape™ is a flexible and super strong self-adhesive thermal insulating tape capable of protecting up to 2000°F of radiant heat. Made of one mil aluminized material bonded to a woven glass fiber heat resistant matting, Cool Tape™ is a ultra light weight heat reflective solution for wrapping wires, cables, hoses, fuel lines, covering seams and many other uses. Withstands direct heat up to 400°F Use to secure panels, seal air boxes, wrap wiring & more Strong self-adhesive backing Perfect for giving Reflect-A-Cool, Heat Screen and Floor & Tunnel Shield II a finished edge look! Direct Heat Resistance: 400°F Radiant Heat Resistance: 2000°F..
44.78€
Ex Tax:37.32€
Cell Saver™ solves the problem of heat soak into batteries, absorbs leaking acids and prevents premature failure due to heat. Batteries are very susceptible to heat and vibration that could cause premature failure and hazardous leaks. Cell Saver™ is very capable of damping vibration and will absorb and neutralize any damaging leaky battery acids. Cell Saver™ is easy to install and excess material can be trimmed to accommodate batteries of most sizes and shapes. Protects batteries from harmful radiant heat Material withstands up to 2000°F radiant heat Traps & neutralizes harmful battery acid Protects environment and your vehicle Completely safe to handle before and during installation Clean finished look with easy installation Kit Includes: 40" L x 7" W insulation material 12" x 7" treated base mat Radiant Heat Resistance: 2000°F..
36.00€
Ex Tax:30.00€
Easy Loom™ Split Sleeves are a great solution to cleaning up and protecting old wiring, new wiring, lines hoses and more. Protective Easy Loom offers a clean, classy way to protect exposed wires, cables and hoses on trucks, SUV's and powersport vehicles including ATVs and UTVs. Superior in style and function to simple plastic tubing, DEI's Easy Loom adds a superior level of protection to sensitive wires cables and hoses exposed to abrasion or the elements; all with a clean, classy look. Protects against abrasion, chemicals & the elements Clean, classy way to protect wires, hoses & cables Superior style & function vs. plastic tubing Split design makes installation easy No need to disconnect wires Available in multiple diameters Radiant Heat Resistance: 347°F Melting Point: 500°F..
32.20€
Ex Tax:26.83€
Easy Loom™ Split Sleeves are a great solution to cleaning up and protecting old wiring, new wiring, lines hoses and more. Protective Easy Loom offers a clean, classy way to protect exposed wires, cables and hoses on trucks, SUV's and powersport vehicles including ATVs and UTVs. Superior in style and function to simple plastic tubing, DEI's Easy Loom adds a superior level of protection to sensitive wires cables and hoses exposed to abrasion or the elements; all with a clean, classy look. Protects against abrasion, chemicals & the elements Clean, classy way to protect wires, hoses & cables Superior style & function vs. plastic tubing Split design makes installation easy No need to disconnect wires Available in multiple diameters Radiant Heat Resistance: 347°F Melting Point: 500°F..
40.98€
Ex Tax:34.15€
Easy Loom™ Split Sleeves are a great solution to cleaning up and protecting old wiring, new wiring, lines hoses and more. Protective Easy Loom offers a clean, classy way to protect exposed wires, cables and hoses on trucks, SUV's and powersport vehicles including ATVs and UTVs. Superior in style and function to simple plastic tubing, DEI's Easy Loom adds a superior level of protection to sensitive wires cables and hoses exposed to abrasion or the elements; all with a clean, classy look. Protects against abrasion, chemicals & the elements Clean, classy way to protect wires, hoses & cables Superior style & function vs. plastic tubing Split design makes installation easy No need to disconnect wires Available in multiple diameters Radiant Heat Resistance: 347°F Melting Point: 500°F..
32.20€
Ex Tax:26.83€
Easy Loom™ Split Sleeves are a great solution to cleaning up and protecting old wiring, new wiring, lines hoses and more. Protective Easy Loom offers a clean, classy way to protect exposed wires, cables and hoses on trucks, SUV's and powersport vehicles including ATVs and UTVs. Superior in style and function to simple plastic tubing, DEI's Easy Loom adds a superior level of protection to sensitive wires cables and hoses exposed to abrasion or the elements; all with a clean, classy look. Protects against abrasion, chemicals & the elements Clean, classy way to protect wires, hoses & cables Superior style & function vs. plastic tubing Split design makes installation easy No need to disconnect wires Available in multiple diameters Radiant Heat Resistance: 347°F Melting Point: 500°F..
28.29€
Ex Tax:23.58€
DEI Speed Tape insulation tape, 2in x 27.5m DEI 060101 USA-DEI-60101 DEI's Speed Tape™ has multiple uses including race applications, temporary damage repairs and taping body seams to name a few. Speed Tape™ tears straight and easy every time...
9.94€
Ex Tax:8.28€
High quality exhaust wrap can withstand a temperature of 800 degrees C, temporarily up to 1000 degrees C. It is manufactured in Austria by a company specialising in the manufacture of heat shields, much better than the Chinese wraps "up to 1200 degrees". It is used for wrapping the manifold and other exhaust system components. It significantly reduces the temperature under the hood. When it is used in turbocharged cars it will also slightly reduce the "lag" by increasing the energy of the fumes. Width: 40mm Thickness: 2mm Length: 5m, 10m, 15m or 30m.Bandaż - 10m..
16.83€
Ex Tax:14.02€
High quality exhaust wrap can withstand a temperature of 800 degrees C, temporarily up to 1000 degrees C. It is manufactured in Austria by a company specialising in the manufacture of heat shields, much better than the Chinese wraps "up to 1200 degrees". It is used for wrapping the manifold and other exhaust system components. It significantly reduces the temperature under the hood. When it is used in turbocharged cars it will also slightly reduce the "lag" by increasing the energy of the fumes. Width: 40mm Thickness: 2mm Length: 5m, 10m, 15m or 30m.Bandaż - 15m..
24.15€
Ex Tax:20.12€
High quality exhaust wrap can withstand a temperature of 800 degrees C, temporarily up to 1000 degrees C. It is manufactured in Austria by a company specialising in the manufacture of heat shields, much better than the Chinese wraps "up to 1200 degrees". It is used for wrapping the manifold and other exhaust system components. It significantly reduces the temperature under the hood. When it is used in turbocharged cars it will also slightly reduce the "lag" by increasing the energy of the fumes. Width: 40mm Thickness: 2mm Length: 5m, 10m, 15m or 30m.Bandaż - 30m..
46.10€
Ex Tax:38.41€
High quality exhaust wrap can withstand a temperature of 800 degrees C, temporarily up to 1000 degrees C. It is manufactured in Austria by a company specialising in the manufacture of heat shields, much better than the Chinese wraps "up to 1200 degrees". It is used for wrapping the manifold and other exhaust system components. It significantly reduces the temperature under the hood. When it is used in turbocharged cars it will also slightly reduce the "lag" by increasing the energy of the fumes. Width: 40mm Thickness: 2mm Length: 5m, 10m, 15m or 30m.Bandaż - 5m..
9.51€
Ex Tax:7.93€
High quality exhaust wrap can withstand a temperature of 800 degrees C, temporarily up to 1000 degrees C. It is manufactured in Austria by a company specialising in the manufacture of heat shields, much better than the Chinese wraps "up to 1200 degrees". It is used for wrapping the manifold and other exhaust system components. It significantly reduces the temperature under the hood. When it is used in turbocharged cars it will also slightly reduce the "lag" by increasing the energy of the fumes. Width: 40mm Thickness: 3mm Length: 5m, 10m, 15m or 30mBandaż - 10m..
18.29€
Ex Tax:15.24€
High quality exhaust wrap can withstand a temperature of 800 degrees C, temporarily up to 1000 degrees C. It is manufactured in Austria by a company specialising in the manufacture of heat shields, much better than the Chinese wraps "up to 1200 degrees". It is used for wrapping the manifold and other exhaust system components. It significantly reduces the temperature under the hood. When it is used in turbocharged cars it will also slightly reduce the "lag" by increasing the energy of the fumes. Width: 40mm Thickness: 3mm Length: 5m, 10m, 15m or 30mBandaż - 15m..
25.85€
Ex Tax:21.54€
High quality exhaust wrap can withstand a temperature of 800 degrees C, temporarily up to 1000 degrees C. It is manufactured in Austria by a company specialising in the manufacture of heat shields, much better than the Chinese wraps "up to 1200 degrees". It is used for wrapping the manifold and other exhaust system components. It significantly reduces the temperature under the hood. When it is used in turbocharged cars it will also slightly reduce the "lag" by increasing the energy of the fumes. Width: 40mm Thickness: 3mm Length: 5m, 10m, 15m or 30mBandaż - 30m..
50.24€
Ex Tax:41.87€
High quality exhaust wrap can withstand a temperature of 800 degrees C, temporarily up to 1000 degrees C. It is manufactured in Austria by a company specialising in the manufacture of heat shields, much better than the Chinese wraps "up to 1200 degrees". It is used for wrapping the manifold and other exhaust system components. It significantly reduces the temperature under the hood. When it is used in turbocharged cars it will also slightly reduce the "lag" by increasing the energy of the fumes. Width: 40mm Thickness: 3mm Length: 5m, 10m, 15m or 30mBandaż - 5m..
10.00€
Ex Tax:8.33€
High quality exhaust wrap can withstand a temperature of 800 degrees C, temporarily up to 1000 degrees C. It is manufactured in Austria by a company specialising in the manufacture of heat shields, much better than the Chinese wraps "up to 1200 degrees". It is used for wrapping the manifold and other exhaust system components. It significantly reduces the temperature under the hood. When it is used in turbocharged cars it will also slightly reduce the "lag" by increasing the energy of the fumes. Width: 50mm Thickness: 2mm Length: 5m, 10m, 15m or 30mBandaż - 10m..
19.27€
Ex Tax:16.06€
High quality exhaust wrap can withstand a temperature of 800 degrees C, temporarily up to 1000 degrees C. It is manufactured in Austria by a company specialising in the manufacture of heat shields, much better than the Chinese wraps "up to 1200 degrees". It is used for wrapping the manifold and other exhaust system components. It significantly reduces the temperature under the hood. When it is used in turbocharged cars it will also slightly reduce the "lag" by increasing the energy of the fumes. Width: 50mm Thickness: 2mm Length: 5m, 10m, 15m or 30mBandaż - 15m..
28.05€
Ex Tax:23.37€
High quality exhaust wrap can withstand a temperature of 800 degrees C, temporarily up to 1000 degrees C. It is manufactured in Austria by a company specialising in the manufacture of heat shields, much better than the Chinese wraps "up to 1200 degrees". It is used for wrapping the manifold and other exhaust system components. It significantly reduces the temperature under the hood. When it is used in turbocharged cars it will also slightly reduce the "lag" by increasing the energy of the fumes. Width: 50mm Thickness: 2mm Length: 5m, 10m, 15m or 30mBandaż - 30m..
53.41€
Ex Tax:44.51€
High quality exhaust wrap can withstand a temperature of 800 degrees C, temporarily up to 1000 degrees C. It is manufactured in Austria by a company specialising in the manufacture of heat shields, much better than the Chinese wraps "up to 1200 degrees". It is used for wrapping the manifold and other exhaust system components. It significantly reduces the temperature under the hood. When it is used in turbocharged cars it will also slightly reduce the "lag" by increasing the energy of the fumes. Width: 50mm Thickness: 2mm Length: 5m, 10m, 15m or 30mBandaż - 5m..
10.98€
Ex Tax:9.15€
High quality exhaust wrap can withstand a temperature of 800 degrees C, temporarily up to 1000 degrees C. It is manufactured in Austria by a company specialising in the manufacture of heat shields, much better than the Chinese wraps "up to 1200 degrees". It is used for wrapping the manifold and other exhaust system components. It significantly reduces the temperature under the hood. When it is used in turbocharged cars it will also slightly reduce the "lag" by increasing the energy of the fumes. Width: 50mm Thickness: 3mm Length: 5m, 10m, 15m or 30mBandaż - 10m..
20.00€
Ex Tax:16.67€
High quality exhaust wrap can withstand a temperature of 800 degrees C, temporarily up to 1000 degrees C. It is manufactured in Austria by a company specialising in the manufacture of heat shields, much better than the Chinese wraps "up to 1200 degrees". It is used for wrapping the manifold and other exhaust system components. It significantly reduces the temperature under the hood. When it is used in turbocharged cars it will also slightly reduce the "lag" by increasing the energy of the fumes. Width: 50mm Thickness: 3mm Length: 5m, 10m, 15m or 30mBandaż - 15m..
29.02€
Ex Tax:24.19€
High quality exhaust wrap can withstand a temperature of 800 degrees C, temporarily up to 1000 degrees C. It is manufactured in Austria by a company specialising in the manufacture of heat shields, much better than the Chinese wraps "up to 1200 degrees". It is used for wrapping the manifold and other exhaust system components. It significantly reduces the temperature under the hood. When it is used in turbocharged cars it will also slightly reduce the "lag" by increasing the energy of the fumes. Width: 50mm Thickness: 3mm Length: 5m, 10m, 15m or 30mBandaż - 30m..
55.85€
Ex Tax:46.54€
High quality exhaust wrap can withstand a temperature of 800 degrees C, temporarily up to 1000 degrees C. It is manufactured in Austria by a company specialising in the manufacture of heat shields, much better than the Chinese wraps "up to 1200 degrees". It is used for wrapping the manifold and other exhaust system components. It significantly reduces the temperature under the hood. When it is used in turbocharged cars it will also slightly reduce the "lag" by increasing the energy of the fumes. Width: 50mm Thickness: 3mm Length: 5m, 10m, 15m or 30mBandaż - 5m..
11.22€
Ex Tax:9.35€
High quality exhaust wrap can withstand a temperature of 800 degrees C, temporarily up to 1000 degrees C. It is manufactured in Austria by a company specialising in the manufacture of heat shields, much better than the Chinese wraps "up to 1200 degrees". It is used for wrapping the manifold and other exhaust system components. It significantly reduces the temperature under the hood. When it is used in turbocharged cars it will also slightly reduce the "lag" by increasing the energy of the fumes. Width: 50mm Thickness: 2mm Length: 5m, 10m or 15m Color: BlackBandaż - 10m..
21.71€
Ex Tax:18.09€
High quality exhaust wrap can withstand a temperature of 800 degrees C, temporarily up to 1000 degrees C. It is manufactured in Austria by a company specialising in the manufacture of heat shields, much better than the Chinese wraps "up to 1200 degrees". It is used for wrapping the manifold and other exhaust system components. It significantly reduces the temperature under the hood. When it is used in turbocharged cars it will also slightly reduce the "lag" by increasing the energy of the fumes. Width: 50mm Thickness: 2mm Length: 5m, 10m or 15m Color: BlackBandaż - 15m..
31.46€
Ex Tax:26.22€
High quality exhaust wrap can withstand a temperature of 800 degrees C, temporarily up to 1000 degrees C. It is manufactured in Austria by a company specialising in the manufacture of heat shields, much better than the Chinese wraps "up to 1200 degrees". It is used for wrapping the manifold and other exhaust system components. It significantly reduces the temperature under the hood. When it is used in turbocharged cars it will also slightly reduce the "lag" by increasing the energy of the fumes. Width: 50mm Thickness: 2mm Length: 5m, 10m or 15m Color: BlackBandaż - 5m..
11.95€
Ex Tax:9.96€
High quality exhaust wrap can withstand a temperature of 800 degrees C, temporarily up to 1000 degrees C. It is manufactured in Austria by a company specialising in the manufacture of heat shields, much better than the Chinese wraps "up to 1200 degrees". It is used for wrapping the manifold and other exhaust system components. It significantly reduces the temperature under the hood. When it is used in turbocharged cars it will also slightly reduce the "lag" by increasing the energy of the fumes. Width: 50mm Thickness: 2mm Length: 5m, 10m or 15m Color: BlueBandaż - 10m..
21.71€
Ex Tax:18.09€
High quality exhaust wrap can withstand a temperature of 800 degrees C, temporarily up to 1000 degrees C. It is manufactured in Austria by a company specialising in the manufacture of heat shields, much better than the Chinese wraps "up to 1200 degrees". It is used for wrapping the manifold and other exhaust system components. It significantly reduces the temperature under the hood. When it is used in turbocharged cars it will also slightly reduce the "lag" by increasing the energy of the fumes. Width: 50mm Thickness: 2mm Length: 5m, 10m or 15m Color: BlueBandaż - 15m..
31.46€
Ex Tax:26.22€
High quality exhaust wrap can withstand a temperature of 800 degrees C, temporarily up to 1000 degrees C. It is manufactured in Austria by a company specialising in the manufacture of heat shields, much better than the Chinese wraps "up to 1200 degrees". It is used for wrapping the manifold and other exhaust system components. It significantly reduces the temperature under the hood. When it is used in turbocharged cars it will also slightly reduce the "lag" by increasing the energy of the fumes. Width: 50mm Thickness: 2mm Length: 5m, 10m or 15m Color: BlueBandaż - 30m..
41.22€
Ex Tax:34.35€
High quality exhaust wrap can withstand a temperature of 800 degrees C, temporarily up to 1000 degrees C. It is manufactured in Austria by a company specialising in the manufacture of heat shields, much better than the Chinese wraps "up to 1200 degrees". It is used for wrapping the manifold and other exhaust system components. It significantly reduces the temperature under the hood. When it is used in turbocharged cars it will also slightly reduce the "lag" by increasing the energy of the fumes. Width: 50mm Thickness: 2mm Length: 5m, 10m or 15m Color: BlueBandaż - 5m..
11.95€
Ex Tax:9.96€
A thermal insulation bandage of very high quality, withstanding temperatures of 1300°C, temporarily up to 1650°C. Made of a special material that is resistant to very high temperatures, it has a beautiful golden colour. The bandage does not dust or crumble, unlike cheap, low-quality bandages. It is used to wrap the manifold and other exhaust system components. Its use can significantly reduce the temperature under the bonnet, while its use in turbocharged cars will also reduce "lag" by increasing the energy of the exhaust. Width: 50mm Thickness: 2mm Length: selectable 5m, 10m, 15m, 30m..
31.46€
Ex Tax:26.22€
A thermal insulation bandage of very high quality, withstanding temperatures of 1300°C, temporarily up to 1650°C. Made of a special material that is resistant to very high temperatures, it has a beautiful golden colour. The bandage does not dust or crumble, unlike cheap, low-quality bandages. It is used to wrap the manifold and other exhaust system components. Its use can significantly reduce the temperature under the bonnet, while its use in turbocharged cars will also reduce "lag" by increasing the energy of the exhaust. Width: 50mm Thickness: 2mm Length: selectable 5m, 10m, 15m, 30m..
46.10€
Ex Tax:38.41€
A thermal insulation bandage of very high quality, withstanding temperatures of 1300°C, temporarily up to 1650°C. Made of a special material that is resistant to very high temperatures, it has a beautiful golden colour. The bandage does not dust or crumble, unlike cheap, low-quality bandages. It is used to wrap the manifold and other exhaust system components. Its use can significantly reduce the temperature under the bonnet, while its use in turbocharged cars will also reduce "lag" by increasing the energy of the exhaust. Width: 50mm Thickness: 2mm Length: selectable 5m, 10m, 15m, 30m..
85.12€
Ex Tax:70.94€
A thermal insulation bandage of very high quality, withstanding temperatures of 1300°C, temporarily up to 1650°C. Made of a special material that is resistant to very high temperatures, it has a beautiful golden colour. The bandage does not dust or crumble, unlike cheap, low-quality bandages. It is used to wrap the manifold and other exhaust system components. Its use can significantly reduce the temperature under the bonnet, while its use in turbocharged cars will also reduce "lag" by increasing the energy of the exhaust. Width: 50mm Thickness: 2mm Length: selectable 5m, 10m, 15m, 30m..
16.83€
Ex Tax:14.02€
EXO Series Exhaust Wrap Black 1,5" x 10ft (4cm x 3m) DEI 010077 USA-DEI-10077 EXO Series exhaust wrap solves the problem of extreme exhaust heat in extreme environments like offroading and powersports. EXO Series exhaust wrap is designed for extreme environment use. Traditional exhaust wraps have not been able to withstand the extreme use that Off-road, Dirt track, Desert and other forms of driving have with exposure to water and dirt. The EXO Series is a dual-layer design, using a combination of hi-temp glass fiber, covered with a 304 grade stainless steel exoskeleton. This unique construction maintains high heat protection while offering superior abrasion and impact protection. Our unique Air Gap Technology keeps direct contact of the glass fiber wrap off the hot surface creating an insulating air barrier. The EXO Series exhaust wrap comes in a special 1.5" width, making it easy to install on any type of header, exhaust pipe or exhaust system making it perfect for high impact spot protection. In addition, the stainless steel exoskeleton locks together when overlapped keeping the wrap tight and making installation easy. Delivering outstanding looks and Rugged performance for long term durability, available in Black or Tan in either 1.5" x 10ft, 20ft, or 30ft rolls. NOTE: Wrapping of the catalytic converter is not recommended, as overheating can lead to reduced lifetime of the converter. Instead, try our Corvette Catalytic Converter Shield or create your own shield using our Floor & Tunnel Shield II™. Note of Caution: Wrap is not designed to be moved or removed after it has been heat cycled. After the fibers have been heated, they lose their initial flexibility. This does not reduce the thermal properties of the exhaust wrap. Be aware of this before you decide to remove the wrap. For this reason, you should avoid wrapping any flex-pipes or flex-joints. Note about Titanium Exhaust Systems: DEI does NOT recommend wrapping exhausts made of titanium. The alloys used in the production of titanium exhaust systems tend to be thin and are designed to dissipate heat quickly. Wrapping any titanium exhaust pipe, regardless of brand, can hold in too much heat, and make the titanium alloy turn brittle and prone to premature cracking. If you are seeking to reduce the heat on a titanium exhaust system, DEI recommends using alternatives such as our flexible heat shields. Direct Heat Resistance: 1200°F Radiant Heat Resistance: 2000°F..
40.98€
Ex Tax:34.15€
EXO Series Exhaust Wrap Black 1,5" x 20ft (4cm x 6m) DEI 010078 USA-DEI-10078 EXO Series exhaust wrap solves the problem of extreme exhaust heat in extreme environments like offroading and powersports. EXO Series exhaust wrap is designed for extreme environment use. Traditional exhaust wraps have not been able to withstand the extreme use that Off-road, Dirt track, Desert and other forms of driving have with exposure to water and dirt. The EXO Series is a dual-layer design, using a combination of hi-temp glass fiber, covered with a 304 grade stainless steel exoskeleton. This unique construction maintains high heat protection while offering superior abrasion and impact protection. Our unique Air Gap Technology keeps direct contact of the glass fiber wrap off the hot surface creating an insulating air barrier. The EXO Series exhaust wrap comes in a special 1.5" width, making it easy to install on any type of header, exhaust pipe or exhaust system making it perfect for high impact spot protection. In addition, the stainless steel exoskeleton locks together when overlapped keeping the wrap tight and making installation easy. Delivering outstanding looks and Rugged performance for long term durability, available in Black or Tan in either 1.5" x 10ft, 20ft, or 30ft rolls. NOTE: Wrapping of the catalytic converter is not recommended, as overheating can lead to reduced lifetime of the converter. Instead, try our Corvette Catalytic Converter Shield or create your own shield using our Floor & Tunnel Shield II™. Note of Caution: Wrap is not designed to be moved or removed after it has been heat cycled. After the fibers have been heated, they lose their initial flexibility. This does not reduce the thermal properties of the exhaust wrap. Be aware of this before you decide to remove the wrap. For this reason, you should avoid wrapping any flex-pipes or flex-joints. Note about Titanium Exhaust Systems: DEI does NOT recommend wrapping exhausts made of titanium. The alloys used in the production of titanium exhaust systems tend to be thin and are designed to dissipate heat quickly. Wrapping any titanium exhaust pipe, regardless of brand, can hold in too much heat, and make the titanium alloy turn brittle and prone to premature cracking. If you are seeking to reduce the heat on a titanium exhaust system, DEI recommends using alternatives such as our flexible heat shields. Direct Heat Resistance: 1200°F Radiant Heat Resistance: 2000°F..
92.68€
Ex Tax:77.24€
EXO Series Exhaust Wrap Black 1,5" x 30ft (4cm x 9m) DEI 010058 USA-DEI-10058 EXO Series exhaust wrap solves the problem of extreme exhaust heat in extreme environments like offroading and powersports. EXO Series exhaust wrap is designed for extreme environment use. Traditional exhaust wraps have not been able to withstand the extreme use that Off-road, Dirt track, Desert and other forms of driving have with exposure to water and dirt. The EXO Series is a dual-layer design, using a combination of hi-temp glass fiber, covered with a 304 grade stainless steel exoskeleton. This unique construction maintains high heat protection while offering superior abrasion and impact protection. Our unique Air Gap Technology keeps direct contact of the glass fiber wrap off the hot surface creating an insulating air barrier. The EXO Series exhaust wrap comes in a special 1.5" width, making it easy to install on any type of header, exhaust pipe or exhaust system making it perfect for high impact spot protection. In addition, the stainless steel exoskeleton locks together when overlapped keeping the wrap tight and making installation easy. Delivering outstanding looks and Rugged performance for long term durability, available in Black or Tan in either 1.5" x 10ft, 20ft, or 30ft rolls. NOTE: Wrapping of the catalytic converter is not recommended, as overheating can lead to reduced lifetime of the converter. Instead, try our Corvette Catalytic Converter Shield or create your own shield using our Floor & Tunnel Shield II™. Note of Caution: Wrap is not designed to be moved or removed after it has been heat cycled. After the fibers have been heated, they lose their initial flexibility. This does not reduce the thermal properties of the exhaust wrap. Be aware of this before you decide to remove the wrap. For this reason, you should avoid wrapping any flex-pipes or flex-joints. Note about Titanium Exhaust Systems: DEI does NOT recommend wrapping exhausts made of titanium. The alloys used in the production of titanium exhaust systems tend to be thin and are designed to dissipate heat quickly. Wrapping any titanium exhaust pipe, regardless of brand, can hold in too much heat, and make the titanium alloy turn brittle and prone to premature cracking. If you are seeking to reduce the heat on a titanium exhaust system, DEI recommends using alternatives such as our flexible heat shields. Direct Heat Resistance: 1200°F Radiant Heat Resistance: 2000°F..
121.95€
Ex Tax:101.63€
EXO Series Exhaust Wrap Tan 1,5" x 10ft (4cm x 3m) DEI 010075 USA-DEI-10075 EXO Series exhaust wrap solves the problem of extreme exhaust heat in extreme environments like offroading and powersports. EXO Series exhaust wrap is designed for extreme environment use. Traditional exhaust wraps have not been able to withstand the extreme use that Off-road, Dirt track, Desert and other forms of driving have with exposure to water and dirt. The EXO Series is a dual-layer design, using a combination of hi-temp glass fiber, covered with a 304 grade stainless steel exoskeleton. This unique construction maintains high heat protection while offering superior abrasion and impact protection. Our unique Air Gap Technology keeps direct contact of the glass fiber wrap off the hot surface creating an insulating air barrier. The EXO Series exhaust wrap comes in a special 1.5" width, making it easy to install on any type of header, exhaust pipe or exhaust system making it perfect for high impact spot protection. In addition, the stainless steel exoskeleton locks together when overlapped keeping the wrap tight and making installation easy. Delivering outstanding looks and Rugged performance for long term durability, available in Black or Tan in either 1.5" x 10ft, 20ft, or 30ft rolls. NOTE: Wrapping of the catalytic converter is not recommended, as overheating can lead to reduced lifetime of the converter. Instead, try our Corvette Catalytic Converter Shield or create your own shield using our Floor & Tunnel Shield II™. Note of Caution: Wrap is not designed to be moved or removed after it has been heat cycled. After the fibers have been heated, they lose their initial flexibility. This does not reduce the thermal properties of the exhaust wrap. Be aware of this before you decide to remove the wrap. For this reason, you should avoid wrapping any flex-pipes or flex-joints. Note about Titanium Exhaust Systems: DEI does NOT recommend wrapping exhausts made of titanium. The alloys used in the production of titanium exhaust systems tend to be thin and are designed to dissipate heat quickly. Wrapping any titanium exhaust pipe, regardless of brand, can hold in too much heat, and make the titanium alloy turn brittle and prone to premature cracking. If you are seeking to reduce the heat on a titanium exhaust system, DEI recommends using alternatives such as our flexible heat shields. Direct Heat Resistance: 1200°F Radiant Heat Resistance: 2000°F..
38.05€
Ex Tax:31.71€
EXO Series Exhaust Wrap Tan 1,5" x 20ft (4cm x 6m) DEI 010076 USA-DEI-10076 EXO Series exhaust wrap solves the problem of extreme exhaust heat in extreme environments like offroading and powersports. EXO Series exhaust wrap is designed for extreme environment use. Traditional exhaust wraps have not been able to withstand the extreme use that Off-road, Dirt track, Desert and other forms of driving have with exposure to water and dirt. The EXO Series is a dual-layer design, using a combination of hi-temp glass fiber, covered with a 304 grade stainless steel exoskeleton. This unique construction maintains high heat protection while offering superior abrasion and impact protection. Our unique Air Gap Technology keeps direct contact of the glass fiber wrap off the hot surface creating an insulating air barrier. The EXO Series exhaust wrap comes in a special 1.5" width, making it easy to install on any type of header, exhaust pipe or exhaust system making it perfect for high impact spot protection. In addition, the stainless steel exoskeleton locks together when overlapped keeping the wrap tight and making installation easy. Delivering outstanding looks and Rugged performance for long term durability, available in Black or Tan in either 1.5" x 10ft, 20ft, or 30ft rolls. NOTE: Wrapping of the catalytic converter is not recommended, as overheating can lead to reduced lifetime of the converter. Instead, try our Corvette Catalytic Converter Shield or create your own shield using our Floor & Tunnel Shield II™. Note of Caution: Wrap is not designed to be moved or removed after it has been heat cycled. After the fibers have been heated, they lose their initial flexibility. This does not reduce the thermal properties of the exhaust wrap. Be aware of this before you decide to remove the wrap. For this reason, you should avoid wrapping any flex-pipes or flex-joints. Note about Titanium Exhaust Systems: DEI does NOT recommend wrapping exhausts made of titanium. The alloys used in the production of titanium exhaust systems tend to be thin and are designed to dissipate heat quickly. Wrapping any titanium exhaust pipe, regardless of brand, can hold in too much heat, and make the titanium alloy turn brittle and prone to premature cracking. If you are seeking to reduce the heat on a titanium exhaust system, DEI recommends using alternatives such as our flexible heat shields. Direct Heat Resistance: 1200°F Radiant Heat Resistance: 2000°F..
73.17€
Ex Tax:60.98€
EXO Series Exhaust Wrap Tan 1,5" x 30ft (4cm x 9m) DEI 010059 USA-DEI-10059 EXO Series exhaust wrap solves the problem of extreme exhaust heat in extreme environments like offroading and powersports. EXO Series exhaust wrap is designed for extreme environment use. Traditional exhaust wraps have not been able to withstand the extreme use that Off-road, Dirt track, Desert and other forms of driving have with exposure to water and dirt. The EXO Series is a dual-layer design, using a combination of hi-temp glass fiber, covered with a 304 grade stainless steel exoskeleton. This unique construction maintains high heat protection while offering superior abrasion and impact protection. Our unique Air Gap Technology keeps direct contact of the glass fiber wrap off the hot surface creating an insulating air barrier. The EXO Series exhaust wrap comes in a special 1.5" width, making it easy to install on any type of header, exhaust pipe or exhaust system making it perfect for high impact spot protection. In addition, the stainless steel exoskeleton locks together when overlapped keeping the wrap tight and making installation easy. Delivering outstanding looks and Rugged performance for long term durability, available in Black or Tan in either 1.5" x 10ft, 20ft, or 30ft rolls. NOTE: Wrapping of the catalytic converter is not recommended, as overheating can lead to reduced lifetime of the converter. Instead, try our Corvette Catalytic Converter Shield or create your own shield using our Floor & Tunnel Shield II™. Note of Caution: Wrap is not designed to be moved or removed after it has been heat cycled. After the fibers have been heated, they lose their initial flexibility. This does not reduce the thermal properties of the exhaust wrap. Be aware of this before you decide to remove the wrap. For this reason, you should avoid wrapping any flex-pipes or flex-joints. Note about Titanium Exhaust Systems: DEI does NOT recommend wrapping exhausts made of titanium. The alloys used in the production of titanium exhaust systems tend to be thin and are designed to dissipate heat quickly. Wrapping any titanium exhaust pipe, regardless of brand, can hold in too much heat, and make the titanium alloy turn brittle and prone to premature cracking. If you are seeking to reduce the heat on a titanium exhaust system, DEI recommends using alternatives such as our flexible heat shields. Direct Heat Resistance: 1200°F Radiant Heat Resistance: 2000°F..
106.34€
Ex Tax:88.62€
Fire Tape / Self Vulcanizing roll 1in x 11m DEI 010476 USA-DEI-10476 Fire Tape is a multi use self-fusing tape that can be used to cover wires, seal temporary leaks, and much much more. Made of a non-adhesive silicone rubber, Fire Tape is waterproof, remains flexible, and does not leave a sticky residue after removal. Ideal for use with Fire Sleeve and other DEI line & hose protective sleeving products, this self-adhesive tape serves as an excellent insulating alternative to vinyl tapes and wraps. Other uses include wrapping wiring harnesses, cover and protect wire splices, and electrical wire terminations. Corrosion & moisture resistant Stretch & wrap application 700 psi tensile strength Permanent air/liquid tight seal Withstands 500°F direct continuous heat Self-bonding and self-curing Does not harden - remains flexible 1" wide x 36ft roll..
47.80€
Ex Tax:39.84€
Flex turbo blanket allows to significantly reduce the temperature under the hood, improving the performance of the exhaust. Working temperatures are up to 1000 degrees, momentarily up to 1200 degrees. Our blankets are thick, well made with several layers of high-quality heat-resistant materials, which guarantees trouble-free exploitation. Blanket is of an average size of T25 (e.g. GT20, GT22, GT25, GT28) Size of the blanket: 380x115(one side 155)mm...
53.41€
Ex Tax:44.51€
Floor & Tunnel Shield II DEI (Non-Adhesive) 107cm x 120cm (42" x 48") DEI 50520 USA-DEI-50520 Floor & Tunnel Shield II™ solves the problem of needing a high heat barrier to block heat from any source intruding into interiors and damaging components and electronics. Use as a barrier to reflect and insulate from any heat source. Designed to provide the best possible heat protection in areas where high temperatures are always present and problematic, Floor & Tunnel Shield II limits heat transfer on fire walls, transmission tunnels, floor boards, fuel cells and other areas where heat is an issue. Floor & Tunnel Shield II provides excellent light weight thermal protection, acts as a guard against track and road debris, and provides sound deadening as well. Constructed with an embossed 10 mil aluminum face bonded to 1/8" composite glass-fiber core, Floor & Tunnel Shield II withstands up to 1750°F. Its improved multifaceted modern aluminum surface offers improved reflection and rigidity and allows for ease of installation - aluminum side must face the heat source. At only 3/16" thick, this product can be shaped and trimmed for a custom fit and is ideal for minimal clearance areas. With a unique and patented finely woven glass-fiber backing, Floor & Tunnel Shield II is the easiest, most cost effective way to control thermal transfer while protecting expensive components and vehicle occupants from extreme heat situations and sound. Floor & Tunnel Shield II can be used on any number of surfaces including, metal, aluminum, carbon fiber, plastic, and more. Multiple uses include: fire walls, under hoods, transmission tunnels, floor pans, fuel cells, and exterior under vehicle locations - anywhere to reflect damaging heat. This version of Floor and Tunnel II does not include the adhesive backing the Original Floor and Tunnel Shield II has. 10 mil dimpled aluminum face Protection for engine compartments Protection for painted body parts Comfortable interior at any temperature Extreme heat barrier - aluminum side should face the heat Only 3/16" thick Use as barrier to reflect and insulate from any heat source No adhesive backing..
102.44€
Ex Tax:85.37€
Floor & Tunnel Shield II DEI (Non-Adhesive) 107cm x 61cm (21" x 42") DEI 50506 USA-DEI-50506 Floor & Tunnel Shield II™ solves the problem of needing a high heat barrier to block heat from any source intruding into interiors and damaging components and electronics. Use as a barrier to reflect and insulate from any heat source. Designed to provide the best possible heat protection in areas where high temperatures are always present and problematic, Floor & Tunnel Shield II limits heat transfer on fire walls, transmission tunnels, floor boards, fuel cells and other areas where heat is an issue. Floor & Tunnel Shield II provides excellent light weight thermal protection, acts as a guard against track and road debris, and provides sound deadening as well. Constructed with an embossed 10 mil aluminum face bonded to 1/8" composite glass-fiber core, Floor & Tunnel Shield II withstands up to 1750°F. Its improved multifaceted modern aluminum surface offers improved reflection and rigidity and allows for ease of installation - aluminum side must face the heat source. At only 3/16" thick, this product can be shaped and trimmed for a custom fit and is ideal for minimal clearance areas. With a unique and patented finely woven glass-fiber backing, Floor & Tunnel Shield II is the easiest, most cost effective way to control thermal transfer while protecting expensive components and vehicle occupants from extreme heat situations and sound. Floor & Tunnel Shield II can be used on any number of surfaces including, metal, aluminum, carbon fiber, plastic, and more. Multiple uses include: fire walls, under hoods, transmission tunnels, floor pans, fuel cells, and exterior under vehicle locations - anywhere to reflect damaging heat. This version of Floor and Tunnel II does not include the adhesive backing the Original Floor and Tunnel Shield II has. 10 mil dimpled aluminum face Protection for engine compartments Protection for painted body parts Comfortable interior at any temperature Extreme heat barrier - aluminum side should face the heat Only 3/16" thick Use as barrier to reflect and insulate from any heat source No adhesive backing..
47.80€
Ex Tax:39.84€
Floor & Tunnel Shield II DEI 050501 - 21" x 24" (61cm x 53cm) Floor & Tunnel Shield II™ solves the problem of needing a high heat barrier to block heat from any source intruding into interiors and damaging components and electronics. Use as a barrier to reflect and insulate from any heat source. Designed to provide the best possible heat protection in areas where high temperatures are always present and problematic, Floor & Tunnel Shield II limits heat transfer on fire walls, transmission tunnels, floor boards, fuel cells and other areas where heat is an issue. Floor & Tunnel Shield II provides excellent light weight thermal protection, acts as a guard against track and road debris, and provides sound deadening as well. Constructed with an embossed 10 mil aluminum face bonded to 1/8" composite glass-fiber core and backed with a high temp super strong pressure sensitive backing, Floor & Tunnel Shield II withstands up to 1750°F. The adhesive side holds past 450°F. Its improved multifaceted modern aluminum surface offers improved reflection and rigidity and allows for ease of installation - aluminum side must face the heat source. At only 3/16" thick, this product can be shaped and trimmed for a custom fit and is ideal for minimal clearance areas. With a unique and patented finely woven glass-fiber backing, Floor & Tunnel Shield II is the easiest, most cost effective way to control thermal transfer while protecting expensive components and vehicle occupants from extreme heat situations and sound. Floor & Tunnel Shield II can be used on any number of surfaces including, metal, aluminum, carbon fiber, plastic, and more. Multiple uses include: fire walls, under hoods, transmission tunnels, floor pans, fuel cells, and exterior under vehicle locations - anywhere to reflect damaging heat. 10 mil dimpled aluminum face Protection for engine compartments Protection for painted body parts Comfortable interior at any temperature Hi-temp adhesive for a "do-it-once" install Extreme heat barrier - aluminum side should face the heat Only 3/16" thick Use as barrier to reflect and insulate from any heat source Great for exterior applications Backing: Adhesive Direct Heat Resistance: 1750°F..
47.80€
Ex Tax:39.84€
Floor & Tunnel Shield II DEI 050502 - 21" x 4ft (122cm x 53cm) Floor & Tunnel Shield II™ solves the problem of needing a high heat barrier to block heat from any source intruding into interiors and damaging components and electronics. Use as a barrier to reflect and insulate from any heat source. Designed to provide the best possible heat protection in areas where high temperatures are always present and problematic, Floor & Tunnel Shield II limits heat transfer on fire walls, transmission tunnels, floor boards, fuel cells and other areas where heat is an issue. Floor & Tunnel Shield II provides excellent light weight thermal protection, acts as a guard against track and road debris, and provides sound deadening as well. Constructed with an embossed 10 mil aluminum face bonded to 1/8" composite glass-fiber core and backed with a high temp super strong pressure sensitive backing, Floor & Tunnel Shield II withstands up to 1750°F. The adhesive side holds past 450°F. Its improved multifaceted modern aluminum surface offers improved reflection and rigidity and allows for ease of installation - aluminum side must face the heat source. At only 3/16" thick, this product can be shaped and trimmed for a custom fit and is ideal for minimal clearance areas. With a unique and patented finely woven glass-fiber backing, Floor & Tunnel Shield II is the easiest, most cost effective way to control thermal transfer while protecting expensive components and vehicle occupants from extreme heat situations and sound. Floor & Tunnel Shield II can be used on any number of surfaces including, metal, aluminum, carbon fiber, plastic, and more. Multiple uses include: fire walls, under hoods, transmission tunnels, floor pans, fuel cells, and exterior under vehicle locations - anywhere to reflect damaging heat. 10 mil dimpled aluminum face Protection for engine compartments Protection for painted body parts Comfortable interior at any temperature Hi-temp adhesive for a "do-it-once" install Extreme heat barrier - aluminum side should face the heat Only 3/16" thick Use as barrier to reflect and insulate from any heat source Great for exterior applications Backing: Adhesive Direct Heat Resistance: 1750°F..
92.69€
Ex Tax:77.24€
Floor & Tunnel Shield II DEI 90553 - 10" x 10" (25cm x 25cm) Floor & Tunnel Shield II™ solves the problem of needing a high heat barrier to block heat from any source intruding into interiors and damaging components and electronics. Use as a barrier to reflect and insulate from any heat source. Designed to provide the best possible heat protection in areas where high temperatures are always present and problematic, Floor & Tunnel Shield II limits heat transfer on fire walls, transmission tunnels, floor boards, fuel cells and other areas where heat is an issue. Floor & Tunnel Shield II provides excellent light weight thermal protection, acts as a guard against track and road debris, and provides sound deadening as well. Constructed with an embossed 10 mil aluminum face bonded to 1/8" composite glass-fiber core and backed with a high temp super strong pressure sensitive backing, Floor & Tunnel Shield II withstands up to 1750°F. The adhesive side holds past 450°F. Its improved multifaceted modern aluminum surface offers improved reflection and rigidity and allows for ease of installation - aluminum side must face the heat source. At only 3/16" thick, this product can be shaped and trimmed for a custom fit and is ideal for minimal clearance areas. With a unique and patented finely woven glass-fiber backing, Floor & Tunnel Shield II is the easiest, most cost effective way to control thermal transfer while protecting expensive components and vehicle occupants from extreme heat situations and sound. Floor & Tunnel Shield II can be used on any number of surfaces including, metal, aluminum, carbon fiber, plastic, and more. Multiple uses include: fire walls, under hoods, transmission tunnels, floor pans, fuel cells, and exterior under vehicle locations - anywhere to reflect damaging heat. 10 mil dimpled aluminum face Protection for engine compartments Protection for painted body parts Comfortable interior at any temperature Hi-temp adhesive for a "do-it-once" install Extreme heat barrier - aluminum side should face the heat Only 3/16" thick Use as barrier to reflect and insulate from any heat source Great for exterior applications Backing: Adhesive Direct Heat Resistance: 1750°F..
15.52€
Ex Tax:12.93€
FMIC gold thermal insulation tape, made of high quality Thermo-Reflex material and adhesive resistant to high temperatures. It works perfectly in the most extreme conditions, and thanks to the excellent heat reflection it's widely used in motorsport - used in the engine compartment, for insulation of e.g. floors from the exhaust, etc. Tape width: 2 " ( 50,8mm) Length of tape to choose from: 4.5m or 9m Lenght - 9m..
38.05€
Ex Tax:31.71€
FMIC gold thermal insulation tape, made of high quality Thermo-Reflex material and adhesive resistant to high temperatures. It works perfectly in the most extreme conditions, and thanks to the excellent heat reflection it's widely used in motorsport - used in the engine compartment, for insulation of e.g. floors from the exhaust, etc. Tape width: 2 " ( 50,8mm) Length of tape to choose from: 4.5m or 9m Lenght - 4,5m..
18.54€
Ex Tax:15.45€
Form-A-Shield - 42in x 48in (105cm x 120cm) DEI 10516 USA-DEI-10516 Form-A-Shield™ solves the problem of needing a direct contact, extreme heat barrier. Capable of withstanding direct heat of up to 1400°F+, Form-A-Shield can be applied to exhaust headers, manifolds, turbo housings, and downpipes dramatically reducing radiant exhaust temperatures. Formed from 10 mil dimpled aluminum bonded to a high temperature rated basalt thermal barrier material, Form-A-Shield can be applied directly to hot surfaces helping to lower under hood temperatures while keeping more heat in the exhaust system. Extremely pliable and forms to many shapes and configurations Durable and resistant to oil and chemical spills Withstands direct heat up to 1400°F+ Superior insulator anywhere near the path of exhaust pipes Can be applied directly to hot surfaces Fasten with straps, clamps or DEI Locking Ties No adhesive backing NOTE: Use DEI Adhesive Spray with Form-A-Shield on non-hot areas to serve as a heat barrier / reflector Direct Heat Resistance: 1400°F..
174.63€
Ex Tax:145.53€
Form-A-Shield - 12in x 21in (30cm x 53cm) DEI 50519 USA-DEI-50519 Form-A-Shield™ solves the problem of needing a direct contact, extreme heat barrier. Capable of withstanding direct heat of up to 1400°F+, Form-A-Shield can be applied to exhaust headers, manifolds, turbo housings, and downpipes dramatically reducing radiant exhaust temperatures. Formed from 10 mil dimpled aluminum bonded to a high temperature rated basalt thermal barrier material, Form-A-Shield can be applied directly to hot surfaces helping to lower under hood temperatures while keeping more heat in the exhaust system. Extremely pliable and forms to many shapes and configurations Durable and resistant to oil and chemical spills Withstands direct heat up to 1400°F+ Superior insulator anywhere near the path of exhaust pipes Can be applied directly to hot surfaces Fasten with straps, clamps or DEI Locking Ties No adhesive backing NOTE: Use DEI Adhesive Spray with Form-A-Shield on non-hot areas to serve as a heat barrier / reflector Direct Heat Resistance: 1400°F..
36.00€
Ex Tax:30.00€
Form-A-Shield™ - 21in x 48in (53cm x 122cm) USA-DEI-10517 Form-A-Shield™ solves the problem of needing a direct contact, extreme heat barrier. Capable of withstanding direct heat of up to 1400°F+, Form-A-Shield can be applied to exhaust headers, manifolds, turbo housings, and downpipes dramatically reducing radiant exhaust temperatures. Formed from 10 mil dimpled aluminum bonded to a high temperature rated basalt thermal barrier material, Form-A-Shield can be applied directly to hot surfaces helping to lower under hood temperatures while keeping more heat in the exhaust system. Extremely pliable and forms to many shapes and configurations Durable and resistant to oil and chemical spills Withstands direct heat up to 1400°F+ Superior insulator anywhere near the path of exhaust pipes Can be applied directly to hot surfaces Fasten with straps, clamps or DEI Locking Ties No adhesive backing NOTE: Use DEI Adhesive Spray with Form-A-Shield on non-hot areas to serve as a heat barrier / reflector Direct Heat Resistance: 1400°F..
102.44€
Ex Tax:85.37€
FMIC gold thermal insulation tape, made of high quality Thermo-Reflex material and adhesive resistant to high temperatures. It works perfectly in the most extreme conditions, and thanks to the excellent heat reflection it's widely used in motorsport - used in the engine compartment, for insulation of e.g. floors from the exhaust, etc. Size: 51x51cm..
28.29€
Ex Tax:23.58€
Thermal insulation sleeve made of fiberglass coated with high-class thermo-reflective material. In addition to the excellent thermal insulation properties, it also protects hoses or bundles against mechanical damage. The sleeve is resistant to various working conditions - it can be used at temperatures from -60 to even +300 ° C. The price is for the 10cm section, the maximum length of one section is 1m. Inner diameter: 20mm..
1.54€
Ex Tax:1.28€
The heat insulation sleeve is made from fiberglass coated with high quality thermal reflective material. Apart from excellent heat insulation properties it also protects the hoses against mechanical damage. The sleeve is resistant to variable working conditions - it is suitable for use at temperatures from -60 up to + 300°C. The price concerns a 10cm section, maximum length of one section is 1m. Interior diameter: 30mm..
2.22€
Ex Tax:1.85€
The heat insulation sleeve is made from fiberglass coated with high quality thermal reflective material. Apart from excellent heat insulation properties it also protects the hoses against mechanical damage. The sleeve is resistant to variable working conditions - it is suitable for use at temperatures from -60 up to + 300°C. The price concerns a 10cm section, maximum length of one section is 3m. Interior diameter: 50mm..
3.29€
Ex Tax:2.74€
The heat insulation sleeve is made from fiberglass coated with high quality thermal reflective material. Apart from excellent heat insulation properties it also protects the hoses against mechanical damage. The sleeve is resistant to variable working conditions - it is suitable for use at temperatures from -60 up to + 300°C. The price concerns a 10cm section, maximum length of one section is 3m. Interior diameter: 60mm..
3.78€
Ex Tax:3.15€
Heat Resistant Sealant DEI 010410 USA-DEI-10410 Developed by Dow Corning for the extreme-duty aerospace applications, Heat Resistant Sealant bonds to almost all surfaces including fiberglass, metal, wood, rubber and plastic. Its an ideal method of encapsulating and protecting applications where parts must perform at high temperatures. Unlike other sealants, Heat Resistant Sealant will not sag or run on overhead or on side wall applications. For use with fiberglass, metal, wood, rubber, plastic & more Withstands continuous temps up to 500°F Made from 100% silicone & remains flexible Peel strength of 20 lbs. Includes application nozzle 3 oz. tube Radiant Heat Resistance: 500°F Intermittent Heat Resistance: 600°F..
24.39€
Ex Tax:20.33€
Heat Screen GOLD™ solves the problem of heat from engines and exhaust intruding into interiors and components. Manufactured from our high temperature metalized polyimide lamination, bonded to a robust 20oz heat treated glass fiber base material, Heat Screen GOLD is a reflective heat protection barrier that will protect and keep components cool in the most demanding applications. Able to reflect direct heat up to 800°F makes this the perfect choice to keep critical components air intakes and interiors cool and protected. Heat flux test shows 36% reduction of temperature. 20oz. heat treated base glass Base glass radiant heat to 1100°F .031" thick Mechanically fasten or use DEI Hi-Temp Adhesive *DO NOT apply directly to exhaust components. Direct Heat Resistance: 800°F..
112.20€
Ex Tax:93.50€
Heat Screen no Adhesive 90cm x 100cm (36in x 40in) DEI 010401 USA-DEI-10401 Heat Screen™ solves the problem of heat from engines and exhaust intruding into interiors and components. Heat Screen™ offers an excellent way to reflect radiant heat away from a vehicle's interior and because it's flexible and can be trimmed-to-size to protect against excessive heat sources. Constructed of a high temperature resistant fiberglass material, and with a thickness of only .060", Heat Screen™ features a thermal barrier on one side made of a superior reflective aluminized mylar surface, capable of withstanding direct heat up to 1200°F. Heat Screen™ can be used to protect areas where excessive heat can blister paint, where exhaust pipes run close to the fuel tank, and has many other applications including floorboards, body panels, and under carpeting. Available with or without an adhesive backing (see options above). A high temperature adhesive such as DEI's Hi-Temp Spray Adhesive or Heat Resistant Sealant can be applied to secure the non-adhesive backed Heat Screen™ as well as mechanical fasteners like screws or rivets. DEI's Cool Tape™ is ideal for sealing and covering seams. Excellent protection for painted surfaces Withstands 1200°F of direct heat Can be secured with adhesive or fasteners Trim to desired length Use with DEI's Hi-Temp Spray Adhesive or Heat Resistant Sealant Direct Heat Resistance: 1200°F Radiant Heat Resistance: 2000°F ..
96.59€
Ex Tax:80.49€
Heat Screen with Adhesive 30cm x 60cm (12in x 24in) DEI 010071 USA-DEI-10071 Heat Screen™ solves the problem of heat from engines and exhaust intruding into interiors and components. Heat Screen™ offers an excellent way to reflect radiant heat away from a vehicle's interior and because it's flexible and can be trimmed-to-size to protect against excessive heat sources. Constructed of a high temperature resistant fiberglass material, and with a thickness of only .060", Heat Screen™ features a thermal barrier on one side made of a superior reflective aluminized mylar surface, capable of withstanding direct heat up to 1200°F. Heat Screen™ can be used to protect areas where excessive heat can blister paint, where exhaust pipes run close to the fuel tank, and has many other applications including floorboards, body panels, and under carpeting. Available with or without an adhesive backing (see options above). A high temperature adhesive such as DEI's Hi-Temp Spray Adhesive or Heat Resistant Sealant can be applied to secure the non-adhesive backed Heat Screen™ as well as mechanical fasteners like screws or rivets. DEI's Cool Tape™ is ideal for sealing and covering seams. Excellent protection for painted surfaces Withstands 1200°F of direct heat Can be secured with adhesive or fasteners Trim to desired length Use with DEI's Hi-Temp Spray Adhesive or Heat Resistant Sealant Direct Heat Resistance: 1200°F Radiant Heat Resistance: 2000°F..
31.22€
Ex Tax:26.02€
Heat Screen with Adhesive 90cm x 50cm (36in x 20in) DEI 010399 USA-DEI-10399 Heat Screen™ solves the problem of heat from engines and exhaust intruding into interiors and components. Heat Screen™ offers an excellent way to reflect radiant heat away from a vehicle's interior and because it's flexible and can be trimmed-to-size to protect against excessive heat sources. Constructed of a high temperature resistant fiberglass material, and with a thickness of only .060", Heat Screen™ features a thermal barrier on one side made of a superior reflective aluminized mylar surface, capable of withstanding direct heat up to 1200°F. Heat Screen™ can be used to protect areas where excessive heat can blister paint, where exhaust pipes run close to the fuel tank, and has many other applications including floorboards, body panels, and under carpeting. Available with or without an adhesive backing (see options above). A high temperature adhesive such as DEI's Hi-Temp Spray Adhesive or Heat Resistant Sealant can be applied to secure the non-adhesive backed Heat Screen™ as well as mechanical fasteners like screws or rivets. DEI's Cool Tape™ is ideal for sealing and covering seams. Excellent protection for painted surfaces Withstands 1200°F of direct heat Can be secured with adhesive or fasteners Trim to desired length Use with DEI's Hi-Temp Spray Adhesive or Heat Resistant Sealant Direct Heat Resistance: 1200°F Radiant Heat Resistance: 2000°F..
57.56€
Ex Tax:47.97€
Heat Screen with Adhesive 90cm x 50cm (36in x 40in) DEI 010400 USA-DEI-10400 Heat Screen™ solves the problem of heat from engines and exhaust intruding into interiors and components. Heat Screen™ offers an excellent way to reflect radiant heat away from a vehicle's interior and because it's flexible and can be trimmed-to-size to protect against excessive heat sources. Constructed of a high temperature resistant fiberglass material, and with a thickness of only .060", Heat Screen™ features a thermal barrier on one side made of a superior reflective aluminized mylar surface, capable of withstanding direct heat up to 1200°F. Heat Screen™ can be used to protect areas where excessive heat can blister paint, where exhaust pipes run close to the fuel tank, and has many other applications including floorboards, body panels, and under carpeting. Available with or without an adhesive backing (see options above). A high temperature adhesive such as DEI's Hi-Temp Spray Adhesive or Heat Resistant Sealant can be applied to secure the non-adhesive backed Heat Screen™ as well as mechanical fasteners like screws or rivets. DEI's Cool Tape™ is ideal for sealing and covering seams. Excellent protection for painted surfaces Withstands 1200°F of direct heat Can be secured with adhesive or fasteners Trim to desired length Use with DEI's Hi-Temp Spray Adhesive or Heat Resistant Sealant Direct Heat Resistance: 1200°F Radiant Heat Resistance: 2000°F..
125.85€
Ex Tax:104.88€
Hi-Temp Silicone Coating Spray – Aluminium DEI 010302 USA-DEI-10302 Ht Silicone Coatings solve the problem of exhaust wraps deteriorating because of dirt and debris hitting it. It seals and protects wraps and extends the life of the wrap. The High Temperature (HT) Silicone Coating provides lasting protection for any hot surface up to 1500 degrees. DEI recommend the use of this coating with their exhaust wrap because it seals the material and provides lasting protection from oil, dirt and road grime. Don't limit the use to exhaust header wrap, this products works well on headers, blocks, starters and even on your grill at home. HT Silicone Coating is VOC (Volatile Organic Compounds) compliant in all 50 states. For use with all DEI exhaust wraps, HT Silicone Coating penetrates, seals and protects as well as helping to extend the lifespan of all DEI exhaust wraps. See special instructions below for best adhesion on Titanium exhaust wrap products. Protection from abrasions, oil, and grime Withstands up to 1500°F For use on exhaust wraps, engine blocks, pipes, manifolds & more 12 oz. can Cure temperature: 400°F Cure time: 2 hours Titanium Application Instructions While not required for Titanium exhaust wrap, HT Silicone Coating will protect and prolong the life of the wrap. Due to the difference in material from glass fiber, HT Silicone Coating soaks into Titanium exhaust wrap's basalt fiber differently and needs a few coats and heat cycles for it to adhere properly. DEI recommends a minimum of three coats, each heat cycled for curing before applying the next coat. To cure, HT Silicone Coating needs to reach a temperature of 400°F for approximately 2 hours. Allow to cool before applying the next coat. * HT Silicone Coating is sold in a compressed aerosol container. Regulations restrict the air transport of flammable products (aerosols). If you are outside the continental USA and are interested in purchasing an aerosol based DEI product, please contact our offices for further information at 1-440-930-7940. Radiant Heat Resistance: 1500°F Color: Aluminium ..
18.05€
Ex Tax:15.04€
Hi-Temp Silicone Coating Spray – Black DEI 010301 USA-DEI-10301 Ht Silicone Coatings solve the problem of exhaust wraps deteriorating because of dirt and debris hitting it. It seals and protects wraps and extends the life of the wrap. The High Temperature (HT) Silicone Coating provides lasting protection for any hot surface up to 1500 degrees. DEI recommend the use of this coating with their exhaust wrap because it seals the material and provides lasting protection from oil, dirt and road grime. Don't limit the use to exhaust header wrap, this products works well on headers, blocks, starters and even on your grill at home. HT Silicone Coating is VOC (Volatile Organic Compounds) compliant in all 50 states. For use with all DEI exhaust wraps, HT Silicone Coating penetrates, seals and protects as well as helping to extend the lifespan of all DEI exhaust wraps. See special instructions below for best adhesion on Titanium exhaust wrap products. Protection from abrasions, oil, and grime Withstands up to 1500°F For use on exhaust wraps, engine blocks, pipes, manifolds & more 12 oz. can Cure temperature: 400°F Cure time: 2 hours Titanium Application Instructions While not required for Titanium exhaust wrap, HT Silicone Coating will protect and prolong the life of the wrap. Due to the difference in material from glass fiber, HT Silicone Coating soaks into Titanium exhaust wrap's basalt fiber differently and needs a few coats and heat cycles for it to adhere properly. DEI recommends a minimum of three coats, each heat cycled for curing before applying the next coat. To cure, HT Silicone Coating needs to reach a temperature of 400°F for approximately 2 hours. Allow to cool before applying the next coat. * HT Silicone Coating is sold in a compressed aerosol container. Regulations restrict the air transport of flammable products (aerosols). If you are outside the continental USA and are interested in purchasing an aerosol based DEI product, please contact our offices for further information at 1-440-930-7940. Radiant Heat Resistance: 1500°F Color: Black..
18.05€
Ex Tax:15.04€
Hi-Temp Silicone Coating Spray – White DEI 010303 USA-DEI-10303 Ht Silicone Coatings solve the problem of exhaust wraps deteriorating because of dirt and debris hitting it. It seals and protects wraps and extends the life of the wrap. The High Temperature (HT) Silicone Coating provides lasting protection for any hot surface up to 1500 degrees. DEI recommend the use of this coating with their exhaust wrap because it seals the material and provides lasting protection from oil, dirt and road grime. Don't limit the use to exhaust header wrap, this products works well on headers, blocks, starters and even on your grill at home. HT Silicone Coating is VOC (Volatile Organic Compounds) compliant in all 50 states. For use with all DEI exhaust wraps, HT Silicone Coating penetrates, seals and protects as well as helping to extend the lifespan of all DEI exhaust wraps. See special instructions below for best adhesion on Titanium exhaust wrap products. Protection from abrasions, oil, and grime Withstands up to 1500°F For use on exhaust wraps, engine blocks, pipes, manifolds & more 12 oz. can Cure temperature: 400°F Cure time: 2 hours Titanium Application Instructions While not required for Titanium exhaust wrap, HT Silicone Coating will protect and prolong the life of the wrap. Due to the difference in material from glass fiber, HT Silicone Coating soaks into Titanium exhaust wrap's basalt fiber differently and needs a few coats and heat cycles for it to adhere properly. DEI recommends a minimum of three coats, each heat cycled for curing before applying the next coat. To cure, HT Silicone Coating needs to reach a temperature of 400°F for approximately 2 hours. Allow to cool before applying the next coat. * HT Silicone Coating is sold in a compressed aerosol container. Regulations restrict the air transport of flammable products (aerosols). If you are outside the continental USA and are interested in purchasing an aerosol based DEI product, please contact our offices for further information at 1-440-930-7940. Radiant Heat Resistance: 1500°F Color: White..
18.05€
Ex Tax:15.04€
Hi-Temp Spray Adhesive DEI 010490 USA-DEI-10490 Hi-Temp Spray Adhesive provides high strength adhesion and bonds a wide variety of materials, including trims, foams, fabrics and more. It has a specially designed three-way adjustable valve allowing the user to select the spray pattern that best suits the job. Dries quickly & clear Forms a water-resistant bond High temp resistant up to 160°F (71°C) High bonding strength for many materials 10 oz. can Radiant Heat Resistance: 160°F..
20.39€
Ex Tax:16.99€
Hose clamp made 100% out of high quality stainless steel. Dimensions: length - 200mm, width - 5mm. The clamp is required to accurately attach thermo wrap to the exhaust manifold and downpipe. A unique design of the cleat counteracts loosening of the clamp during exploitation...
0.48€
Ex Tax:0.40€
Hose clamp made 100% out of high quality stainless steel. Dimensions: length - 300mm, width - 5mm. The clamp is required to accurately attach thermo wrap to the exhaust manifold and downpipe. A unique design of the cleat counteracts loosening of the clamp during exploitation...
0.49€
Ex Tax:0.40€
Hose clamp made 100% out of high quality stainless steel. Dimensions: length - 350mm, width - 5mm. The clamp is required to accurately attach thermo wrap to the exhaust manifold and downpipe. A unique design of the cleat counteracts loosening of the clamp during exploitation...
0.50€
Ex Tax:0.42€
Clamp made of 100% high quality stainless steel, has a length of 360mm and a width of 5mm. Necessary when putting the thermal insulation bandage on the collector. The unique latch design prevents the clamp from loosening during use...
0.50€
Ex Tax:0.42€
The professional heat shield Inconel FMIC.Pro is widely used in motorsport. It is ideal for insulating high temperatures from exhaust system components, such as manifolds, downpipes, mufflers, catalytic converters and turbochargers. Inconel, from which the heat shield is made, significantly exceeds with its properties similar shields made of stainless steel. Higher resistance to high temperatures has made it possible to reduce the thickness of the heat shield, which in combination with embossing makes it much easier to form and fit the sheet to the insulated element. It is easy to weld and extremely durable. A product for professional use, chosen by professional drivers. Dimensions of the mat: 50x60cm Material: Stamped Inconel..
24.15€
Ex Tax:20.12€
The professional heat shield Inconel FMIC.Pro is widely used in motorsport. It is ideal for insulating high temperatures from exhaust system components, such as manifolds, downpipes, mufflers, catalytic converters and turbochargers. Inconel, from which the heat shield is made, significantly exceeds with its properties similar shields made of stainless steel. Higher resistance to high temperatures has made it possible to reduce the thickness of the heat shield, which in combination with embossing makes it much easier to form and fit the sheet to the insulated element. It is easy to weld and extremely durable. A product for professional use, chosen by professional drivers. Dimensions of the mat: 100x60cm Material: Stamped Inconel..
41.22€
Ex Tax:34.35€
The professional heat shield Inconel FMIC.Pro is widely used in motorsport. It is ideal for insulating high temperatures from exhaust system components, such as manifolds, downpipes, mufflers, catalytic converters and turbochargers. Inconel, from which the heat shield is made, significantly exceeds with its properties similar shields made of stainless steel while a thick layer of ceramic matting additionally insulates the temperature. Higher resistance to high temperatures has made it possible to reduce the thickness of the heat shield, which in combination with embossing makes it much easier to form and fit the sheet to the insulated element. It is easy to weld and extremely durable. A product for professional use, chosen by professional drivers. Dimensions of the mat: 50x60cm Material: Stamped Inconel..
33.90€
Ex Tax:28.25€
The professional heat shield Inconel FMIC.Pro is widely used in motorsport. It is ideal for insulating high temperatures from exhaust system components, such as manifolds, downpipes, mufflers, catalytic converters and turbochargers. Inconel, from which the heat shield is made, significantly exceeds with its properties similar shields made of stainless steel while a thick layer of ceramic matting additionally insulates the temperature. Higher resistance to high temperatures has made it possible to reduce the thickness of the heat shield, which in combination with embossing makes it much easier to form and fit the sheet to the insulated element. It is easy to weld and extremely durable. A product for professional use, chosen by professional drivers. Dimensions of the mat: 100x60cm Material: Stamped Inconel..
53.41€
Ex Tax:44.51€
Muffler Shield Kit DEI 10529 USA-DEI-10529 Muffler Shield Kit solves the problem of heat soak into interiors and components from mufflers that are close to floors. The Best muffler shield/wrap on the market. Based off our proven Floor and Tunnel II heat shield, our new Muffler Shield is designed to wrap around just about any size muffler. Includes our tough Stainless Steel positive locking ties for a tight secure installation. Made from 10mil dimpled aluminum with a 1/8" needle glass insulator it can be easily trimmed to fit most mufflers. Greatly reduces radiant heat coming off your muffler resulting in a cooler interior and protection from damaging heat. NOTE: intended for street legal vehicle use only. For performance racing or heavy industrial applications, use Form-A-Shield instead. Greatly reduce radiant heat from street muffler Cooler interior Protect from damaging heat Kit includes FREE Locking Tie Tool Kit Includes: 1 - 42" x 24" Muffler Shield 4 - 40" x 1/2" Positive Locking Ties 1 - Locking Tie Tool Direct Heat Resistance: 700°F..
77.07€
Ex Tax:64.23€
Quick-Fix Self-Adhering Tape 2,5cm x 3,6m DEI 010491 USA-DEI-10491 High performance Quick Fix Tape bonds to itself and is self-curing, forming a waterproof permanent seal. It's ideal for emergency hose repair, non-slip grip surface for tools, electrical splices and connections, serves as a temporary leak sealer, and does not leave a sticky residue after removal. Just a few of it's many uses. Extruded from a special high performance grade silicone compound and engineered at 700psi tensile strength, Quick Fix Tape is adhesive-free, has insulating capabilities up to 8,000 volts and stretches to three times its length for a simple stretch-and-wrap application. The triangular profile of the tape (the center is thicker than the edges) provides a smooth edge when over lapping tape. Withstands temperatures from -65F (-54C) to 500F (260C) Seal hoses, bundle & wrap wires, weatherproof connections & more Can be applied to wet surfaces Permanent air / liquid tight seal Adhesive-free 700psi tensile strength Insulating capabilities up to 8,000 volts Stretches 3x length 1" wide x 12 ft roll Radiant Heat Resistance: 500°F Tensile Strength: 700psi Insulating Capabilities: 8,000 volts..
15.51€
Ex Tax:12.93€
Radiator Relief for Diesels 16oz. DEI 040204 USA-DEI-40204 Radiator Relief for Diesels supercharges your radiator by transferring heat more efficiently through the radiator. Similar to the original formula this proven coolant additive will reduce your operating temperature up to 30°F degrees and reduce engine wear that occurs during extreme heat. NEW Radiator Relief for Diesels is also formulated with a corrosion inhibitor that reduces mineral deposits. This is the first additive that maintains pH levels that otherwise fluctuate over time resulting in core damage. ..
13.17€
Ex Tax:10.98€
Reflect-A-Cool 30cm x 30cm (12in x 12in) Heat Reflective Sheets DEI 010460 USA-DEI-10460 Reflect-A-Cool™ solves the problem of heat intrusion into interiors and components. Reflect-A-Cool™, constructed of fiberglass material backed with a layer of aluminized reflective foil to handle direct continuous temperature of 400°F has many uses such as covering firewalls, marine engine compartments, RVs, in the tub of a race car where typical mechanical fasteners cannot be used and has many industrial uses. Reflect-A-Cool™ can be trimmed to fit just about any shape. Just measure, trim, face reflective side towards source of radiant heat and remove self-adhesive backing. It's that easy. Protect wires, cables, hoses, pipes & tubing from radiant heat sources Radiant heat protection up to 2000°F Self-adhesive backing with release liner for easy installation Moisture & solvent resistant Virtually NO clearance needed Light weight and flexible-Trim to size 0.0065" thick Easy to apply, won't lift off Direct Heat Resistance: 400°F Radiant Heat Resistance: 2000°F..
13.17€
Ex Tax:10.98€
Reflect-A-Cool 30cm x 60cm (12in x 24in) Heat Reflective Sheets DEI 010461 USA-DEI-10461 Reflect-A-Cool™ solves the problem of heat intrusion into interiors and components. Reflect-A-Cool™, constructed of fiberglass material backed with a layer of aluminized reflective foil to handle direct continuous temperature of 400°F has many uses such as covering firewalls, marine engine compartments, RVs, in the tub of a race car where typical mechanical fasteners cannot be used and has many industrial uses. Reflect-A-Cool™ can be trimmed to fit just about any shape. Just measure, trim, face reflective side towards source of radiant heat and remove self-adhesive backing. It's that easy. Protect wires, cables, hoses, pipes & tubing from radiant heat sources Radiant heat protection up to 2000°F Self-adhesive backing with release liner for easy installation Moisture & solvent resistant Virtually NO clearance needed Light weight and flexible-Trim to size 0.0065" thick Easy to apply, won't lift off Direct Heat Resistance: 400°F Radiant Heat Resistance: 2000°F..
22.34€
Ex Tax:18.62€
Reflect-A-Cool 60cm x 60cm (24in x 24in) Heat Reflective Sheets DEI 010462 USA-DEI-10462 Reflect-A-Cool™ solves the problem of heat intrusion into interiors and components. Reflect-A-Cool™, constructed of fiberglass material backed with a layer of aluminized reflective foil to handle direct continuous temperature of 400°F has many uses such as covering firewalls, marine engine compartments, RVs, in the tub of a race car where typical mechanical fasteners cannot be used and has many industrial uses. Reflect-A-Cool™ can be trimmed to fit just about any shape. Just measure, trim, face reflective side towards source of radiant heat and remove self-adhesive backing. It's that easy. Protect wires, cables, hoses, pipes & tubing from radiant heat sources Radiant heat protection up to 2000°F Self-adhesive backing with release liner for easy installation Moisture & solvent resistant Virtually NO clearance needed Light weight and flexible-Trim to size 0.0065" thick Easy to apply, won't lift off Direct Heat Resistance: 400°F Radiant Heat Resistance: 2000°F..
28.29€
Ex Tax:23.58€
Reflect-A-Cool 90cm x 120cm (36in x 48in) Heat Reflective Sheets DEI 010412 USA-DEI-10412 Reflect-A-Cool™ solves the problem of heat intrusion into interiors and components. Reflect-A-Cool™, constructed of fiberglass material backed with a layer of aluminized reflective foil to handle direct continuous temperature of 400°F has many uses such as covering firewalls, marine engine compartments, RVs, in the tub of a race car where typical mechanical fasteners cannot be used and has many industrial uses. Reflect-A-Cool™ can be trimmed to fit just about any shape. Just measure, trim, face reflective side towards source of radiant heat and remove self-adhesive backing. It's that easy. Protect wires, cables, hoses, pipes & tubing from radiant heat sources Radiant heat protection up to 2000°F Self-adhesive backing with release liner for easy installation Moisture & solvent resistant Virtually NO clearance needed Light weight and flexible-Trim to size 0.0065" thick Easy to apply, won't lift off Direct Heat Resistance: 400°F Radiant Heat Resistance: 2000°F..
82.93€
Ex Tax:69.11€
Reflect-A-GOLD - 30cm x 30cm (12in x 12in) Heat Reflective Sheet DEI 010391 USA-DEI-10391 Reflect-A-GOLD™ solves the problem of heat soak into air boxes, seats, firewalls, transmission tunnels and intakes. Now available as a 2-Pack for a limited time! Reflect-A-GOLD is an adhesive heat shield made from a metalized polyimide laminated to a light weight glass fiber cloth with a high temperature pressure sensitive adhesive for use in extreme temperature swing environments. Our lightweight, adhesive thermal shielding is easily applied and won't lift off. It's minimal clearance and ease of use makes Reflect-A-GOLD a highly effective material for firewalls, fuel cells, engine covers, under hoods, engine compartment, bulk heads, seat bottoms, and anything or area that needs protection from heat. For firewalls, bulkheads, engine covers, floors, seat bottoms & more Handles continuous temps up to 800°F Resists UV degradation for long-term performance Adhesive protected by release liner rated up to 325°F 0.0065" thick Easy to apply, won't lift off Radiant Heat Resistance: 800°F Adhesive Heat Resistance: 325°F..
24.39€
Ex Tax:20.33€
Reflect-A-GOLD - 30cm x 60cm (12in x 24in) Heat Reflective Sheet DEI 010392 USA-DEI-10392 Reflect-A-GOLD™ solves the problem of heat soak into air boxes, seats, firewalls, transmission tunnels and intakes. Now available as a 2-Pack for a limited time! Reflect-A-GOLD is an adhesive heat shield made from a metalized polyimide laminated to a light weight glass fiber cloth with a high temperature pressure sensitive adhesive for use in extreme temperature swing environments. Our lightweight, adhesive thermal shielding is easily applied and won't lift off. It's minimal clearance and ease of use makes Reflect-A-GOLD a highly effective material for firewalls, fuel cells, engine covers, under hoods, engine compartment, bulk heads, seat bottoms, and anything or area that needs protection from heat. For firewalls, bulkheads, engine covers, floors, seat bottoms & more Handles continuous temps up to 800°F Resists UV degradation for long-term performance Adhesive protected by release liner rated up to 325°F 0.0065" thick Easy to apply, won't lift off Radiant Heat Resistance: 800°F Adhesive Heat Resistance: 325°F..
40.98€
Ex Tax:34.15€
Reflect-A-GOLD - 30cm x 30cm (12in x 12in) Heat Reflective Sheet DEI 010393 USA-DEI-10393 Reflect-A-GOLD™ solves the problem of heat soak into air boxes, seats, firewalls, transmission tunnels and intakes. Now available as a 2-Pack for a limited time! Reflect-A-GOLD is an adhesive heat shield made from a metalized polyimide laminated to a light weight glass fiber cloth with a high temperature pressure sensitive adhesive for use in extreme temperature swing environments. Our lightweight, adhesive thermal shielding is easily applied and won't lift off. It's minimal clearance and ease of use makes Reflect-A-GOLD a highly effective material for firewalls, fuel cells, engine covers, under hoods, engine compartment, bulk heads, seat bottoms, and anything or area that needs protection from heat. For firewalls, bulkheads, engine covers, floors, seat bottoms & more Handles continuous temps up to 800°F Resists UV degradation for long-term performance Adhesive protected by release liner rated up to 325°F 0.0065" thick Easy to apply, won't lift off Radiant Heat Resistance: 800°F Adhesive Heat Resistance: 325°F..
67.32€
Ex Tax:56.10€
The heat insulation sleeve is made from fiberglass coated with high quality silicone. Apart from excellent heat insulation properties it also protects the hoses against mechanical damage. The sleeve is resistant to variable working conditions - it is suitable for use at temperatures from -60 up to + 300°C. The price concerns a 10cm section, maximum length of one section is 5m. Interior diameter: 12mm - 10cm section..
1.20€
Ex Tax:1.00€
The heat insulation sleeve is made from fiberglass coated with high quality silicone. Apart from excellent heat insulation properties it also protects the hoses against mechanical damage. The sleeve is resistant to variable working conditions - it is suitable for use at temperatures from -60 up to + 300°C. The price concerns a 10cm section, maximum length of one section is 5m. Interior diameter: 15mm..
1.37€
Ex Tax:1.14€
The heat insulation sleeve is made from fiberglass coated with high quality silicone. Apart from excellent heat insulation properties it also protects the hoses against mechanical damage. The sleeve is resistant to variable working conditions - it is suitable for use at temperatures from -60 up to + 300°C. The price concerns a 10cm section, maximum length of one section is 5m. Interior diameter: 19mm..
1.54€
Ex Tax:1.28€
The heat insulation sleeve is made from fiberglass coated with high quality silicone. Apart from excellent heat insulation properties it also protects the hoses against mechanical damage. The sleeve is resistant to variable working conditions - it is suitable for use at temperatures from -60 up to + 300°C. The price concerns a 10cm section, maximum length of one section is 5m. Interior diameter: 25mm..
1.93€
Ex Tax:1.61€
The heat insulation sleeve is made from fiberglass coated with high quality silicone. Apart from excellent heat insulation properties it also protects the hoses against mechanical damage. The sleeve is resistant to variable working conditions - it is suitable for use at temperatures from -60 up to + 300°C. The price concerns a 10cm section, maximum length of one section is 5m. Interior diameter: 30mm..
2.22€
Ex Tax:1.85€
The heat insulation sleeve is made from fiberglass coated with high quality silicone. Apart from excellent heat insulation properties it also protects the hoses against mechanical damage. The sleeve is resistant to variable working conditions - it is suitable for use at temperatures from -60 up to + 300°C. The price concerns a 10cm section, maximum length of one section is 5m. Interior diameter: 40mm..
2.80€
Ex Tax:2.34€
The heat insulation sleeve is made from fiberglass coated with high quality silicone. Apart from excellent heat insulation properties it also protects the hoses against mechanical damage. The sleeve is resistant to variable working conditions - it is suitable for use at temperatures from -60 up to + 300°C. The price concerns a 10cm section, maximum length of one section is 5m. Interior diameter: 50mm..
3.29€
Ex Tax:2.74€
The heat insulation sleeve is made from fiberglass coated with high quality silicone. Apart from excellent heat insulation properties it also protects the hoses against mechanical damage. The sleeve is resistant to variable working conditions - it is suitable for use at temperatures from -60 up to + 300°C. The price concerns a 10cm section, maximum length of one section is 5m. Interior diameter: 60mm..
3.78€
Ex Tax:3.15€
The heat insulation sleeve is made from fiberglass coated with high quality silicone. Apart from excellent heat insulation properties it also protects the hoses against mechanical damage. The sleeve is resistant to variable working conditions - it is suitable for use at temperatures from -60 up to + 300°C. The price concerns a 10cm section, maximum length of one section is 5m. Interior diameter: 9mm..
0.70€
Ex Tax:0.59€
The heat insulation sleeve is made from fiberglass coated with high quality silicone. Apart from excellent heat insulation properties it also protects the hoses against mechanical damage. The sleeve is resistant to variable working conditions - it is suitable for use at temperatures from -60 up to + 300°C. The price concerns a 10cm section, maximum length of one section is 5m. Interior diameter: 9mm..
0.90€
Ex Tax:0.75€
Highest quality SILVER thermal insulation wrap additionally protected with a silver thermo-reflective layer that is resist to 800 degrees C, temporarily up to 1000 degrees C. Manufactured in Austria by a company specializing in the production of thermal shields, it is much better than Chinese bandages "up to 1200 degrees ". Recommended for wrapping the intake system around the exhaust system. Its use allows you to significantly reduce the temperature in the intake system, isolating it from the environment. Width: 50mm Thickness: 2mm Length: 5m, 10m, 15mBandaż - 10m..
21.71€
Ex Tax:18.09€
Highest quality SILVER thermal insulation wrap additionally protected with a silver thermo-reflective layer that is resist to 800 degrees C, temporarily up to 1000 degrees C. Manufactured in Austria by a company specializing in the production of thermal shields, it is much better than Chinese bandages "up to 1200 degrees ". Recommended for wrapping the intake system around the exhaust system. Its use allows you to significantly reduce the temperature in the intake system, isolating it from the environment. Width: 50mm Thickness: 2mm Length: 5m, 10m, 15mBandaż - 15m..
31.46€
Ex Tax:26.22€
Highest quality SILVER thermal insulation wrap additionally protected with a silver thermo-reflective layer that is resist to 800 degrees C, temporarily up to 1000 degrees C. Manufactured in Austria by a company specializing in the production of thermal shields, it is much better than Chinese bandages "up to 1200 degrees ". Recommended for wrapping the intake system around the exhaust system. Its use allows you to significantly reduce the temperature in the intake system, isolating it from the environment. Width: 50mm Thickness: 2mm Length: 5m, 10m, 15mBandaż - 30m..
60.73€
Ex Tax:50.61€
Highest quality SILVER thermal insulation wrap additionally protected with a silver thermo-reflective layer that is resist to 800 degrees C, temporarily up to 1000 degrees C. Manufactured in Austria by a company specializing in the production of thermal shields, it is much better than Chinese bandages "up to 1200 degrees ". Recommended for wrapping the intake system around the exhaust system. Its use allows you to significantly reduce the temperature in the intake system, isolating it from the environment. Width: 50mm Thickness: 2mm Length: 5m, 10m, 15mBandaż - 5m..
11.95€
Ex Tax:9.96€
Heat-insulated cover for spark plugs from FMIC.EU. Made of fiberglass, well insulates plugs/pipes from external heat sources (e.g. exhaust manifold). Maintaining constant, lower temperature ensures a stable spark. The price is for one piece...
7.80€
Ex Tax:6.50€
Heat-insulated cover for spark plugs from FMIC.EU. Made of fiberglass, well insulates plugs/pipes from external heat sources (e.g. exhaust manifold). Maintaining constant, lower temperature ensures a stable spark. The price is for one piece...
10.98€
Ex Tax:9.15€
Made from durable 304 stainless steel and preformed with a curved shape to fit most any size pipes. Two layers of 304 stainless encapsulate a high temperature insulation, allowing up to a 2000°F direct temperature rating. Standoffs 1/2” high provide an air gap to the pipe and making mounting easy with provided stainless clamps. Two sizes available. Features: Stainless Steel Heat Barrier material on outside surfaces Insulating inner layer Welded seams for strength and durability Stainless Steel stand offs to create air gap Advantages: Extremely light weight Block heat & protect components better than factory shields Easy to install with stainless straps Flexible to shape around pipes Benefits: Helps prevent burns & blocks uncomfortable heat Protects components from heat damage Increases driver & passenger comfort..
112.20€
Ex Tax:93.50€
Made from durable 304 stainless steel and preformed with a curved shape to fit most any size pipes. Two layers of 304 stainless encapsulate a high temperature insulation, allowing up to a 2000°F direct temperature rating. Standoffs 1/2” high provide an air gap to the pipe and making mounting easy with provided stainless clamps. Two sizes available. Features: Stainless Steel Heat Barrier material on outside surfaces Insulating inner layer Welded seams for strength and durability Stainless Steel stand offs to create air gap Advantages: Extremely light weight Block heat & protect components better than factory shields Easy to install with stainless straps Flexible to shape around pipes Benefits: Helps prevent burns & blocks uncomfortable heat Protects components from heat damage Increases driver & passenger comfort..
121.95€
Ex Tax:101.63€
Universal heat shield pads. Made from double sided high grade Stainless Steel with silica insulation. Welded seams seal the insulation between the stainless steel making for a durable, long lasting shield. Grommet holes allow for easy mounting. Capable of 2000°F direct heat. Can be hand formed to fit bends and curves. Available in two sizes. Durable 306 stainless steel Dual layer with high temperature insulation Withstands radiant temperatures up to 2000°F Welded edges for strength Integrated grommets for easy, secure mounting..
135.61€
Ex Tax:113.01€
Tan Glass Fiber Exhaust Wrap 15cm x 30m (6" x 100ft) DEI 010104 USA-DEI-10104 An important first step in reducing unwanted and power-robbing under hood heat is wrapping headers and down pipes. Less under hood radiant heat results in a cooler air charge for improved performance and keeping exhaust gases hotter within the exhaust system helps in decreasing exhaust density & increases exhaust flow. Design Engineering Stainless Steel Locking Ties are the perfect way to fasten exhaust wrap for a easy, clean and professional installation. Reduce under hood temperatures a realistic 50% Decreases exhaust density & increases exhaust flow Improves horsepower Withstands 1200°F direct/2000°F radiant Only exhaust wrap with installation guide lines Added durability and heat retention NOTE: Design Engineering HT Silicone Coating spray is highly recommended for DEI glass fiber wrap to penetrate, seal, protect and prolong the lifespan of exhaust wrap. NOTE: Wrapping of the catalytic converter is not recommended, as overheating can lead to reduced lifetime of the converter. Instead, try our Corvette Catalytic Converter Shield or create your own shield using our Floor & Tunnel Shield II™. Note of Caution: Wrap is not designed to be moved or removed after it has been heat cycled. After the fibers have been heated, they lose their initial flexibility. This does not reduce the thermal properties of the exhaust wrap. Be aware of this before you decide to remove the wrap. For this reason, you should avoid wrapping any flex-pipes or flex-joints. Note about Titanium Exhaust Systems: DEI does NOT recommend wrapping exhausts made of titanium. The alloys used in the production of titanium exhaust systems tend to be thin and are designed to dissipate heat quickly. Wrapping any titanium exhaust pipe, regardless of brand, can hold in too much heat, and make the titanium alloy turn brittle and prone to premature cracking. If you are seeking to reduce the heat on a titanium exhaust system, DEI recommends using alternatives such as our flexible heat shields. Direct Heat Resistance: 1200°F Radiant Heat Resistance: 2000°F..
268.29€
Ex Tax:223.58€
Tan Glass Fiber Exhaust Wrap 2.5cm x 15m (1"x50ft) DEI 010101 USA-DEI-10101 An important first step in reducing unwanted and power-robbing under hood heat is wrapping headers and down pipes. Less under hood radiant heat results in a cooler air charge for improved performance and keeping exhaust gases hotter within the exhaust system helps in decreasing exhaust density & increases exhaust flow. Design Engineering Stainless Steel Locking Ties are the perfect way to fasten exhaust wrap for a easy, clean and professional installation. Reduce under hood temperatures a realistic 50% Decreases exhaust density & increases exhaust flow Improves horsepower Withstands 1200°F direct/2000°F radiant Only exhaust wrap with installation guide lines Added durability and heat retention NOTE: Design Engineering HT Silicone Coating spray is highly recommended for DEI glass fiber wrap to penetrate, seal, protect and prolong the lifespan of exhaust wrap. NOTE: Wrapping of the catalytic converter is not recommended, as overheating can lead to reduced lifetime of the converter. Instead, try our Corvette Catalytic Converter Shield or create your own shield using our Floor & Tunnel Shield II™. Note of Caution: Wrap is not designed to be moved or removed after it has been heat cycled. After the fibers have been heated, they lose their initial flexibility. This does not reduce the thermal properties of the exhaust wrap. Be aware of this before you decide to remove the wrap. For this reason, you should avoid wrapping any flex-pipes or flex-joints. Note about Titanium Exhaust Systems: DEI does NOT recommend wrapping exhausts made of titanium. The alloys used in the production of titanium exhaust systems tend to be thin and are designed to dissipate heat quickly. Wrapping any titanium exhaust pipe, regardless of brand, can hold in too much heat, and make the titanium alloy turn brittle and prone to premature cracking. If you are seeking to reduce the heat on a titanium exhaust system, DEI recommends using alternatives such as our flexible heat shields. Direct Heat Resistance: 1200°F Radiant Heat Resistance: 2000°F..
36.00€
Ex Tax:30.00€
Tan Glass Fiber Exhaust Wrap 2.5cm x 30m (1" x 100ft) DEI 010117 USA-DEI-10117 An important first step in reducing unwanted and power-robbing under hood heat is wrapping headers and down pipes. Less under hood radiant heat results in a cooler air charge for improved performance and keeping exhaust gases hotter within the exhaust system helps in decreasing exhaust density & increases exhaust flow. Design Engineering Stainless Steel Locking Ties are the perfect way to fasten exhaust wrap for a easy, clean and professional installation. Reduce under hood temperatures a realistic 50% Decreases exhaust density & increases exhaust flow Improves horsepower Withstands 1200°F direct/2000°F radiant Only exhaust wrap with installation guide lines Added durability and heat retention NOTE: Design Engineering HT Silicone Coating spray is highly recommended for DEI glass fiber wrap to penetrate, seal, protect and prolong the lifespan of exhaust wrap. NOTE: Wrapping of the catalytic converter is not recommended, as overheating can lead to reduced lifetime of the converter. Instead, try our Corvette Catalytic Converter Shield or create your own shield using our Floor & Tunnel Shield II™. Note of Caution: Wrap is not designed to be moved or removed after it has been heat cycled. After the fibers have been heated, they lose their initial flexibility. This does not reduce the thermal properties of the exhaust wrap. Be aware of this before you decide to remove the wrap. For this reason, you should avoid wrapping any flex-pipes or flex-joints. Note about Titanium Exhaust Systems: DEI does NOT recommend wrapping exhausts made of titanium. The alloys used in the production of titanium exhaust systems tend to be thin and are designed to dissipate heat quickly. Wrapping any titanium exhaust pipe, regardless of brand, can hold in too much heat, and make the titanium alloy turn brittle and prone to premature cracking. If you are seeking to reduce the heat on a titanium exhaust system, DEI recommends using alternatives such as our flexible heat shields. Direct Heat Resistance: 1200°F Radiant Heat Resistance: 2000°F..
84.88€
Ex Tax:70.73€
Tan Glass Fiber Exhaust Wrap 2.5cm x 4.5m (1" x 15ft) DEI 010105 USA-DEI-10105 An important first step in reducing unwanted and power-robbing under hood heat is wrapping headers and down pipes. Less under hood radiant heat results in a cooler air charge for improved performance and keeping exhaust gases hotter within the exhaust system helps in decreasing exhaust density & increases exhaust flow. Design Engineering Stainless Steel Locking Ties are the perfect way to fasten exhaust wrap for a easy, clean and professional installation. Reduce under hood temperatures a realistic 50% Decreases exhaust density & increases exhaust flow Improves horsepower Withstands 1200°F direct/2000°F radiant Only exhaust wrap with installation guide lines Added durability and heat retention NOTE: Design Engineering HT Silicone Coating spray is highly recommended for DEI glass fiber wrap to penetrate, seal, protect and prolong the lifespan of exhaust wrap. NOTE: Wrapping of the catalytic converter is not recommended, as overheating can lead to reduced lifetime of the converter. Instead, try our Corvette Catalytic Converter Shield or create your own shield using our Floor & Tunnel Shield II™. Note of Caution: Wrap is not designed to be moved or removed after it has been heat cycled. After the fibers have been heated, they lose their initial flexibility. This does not reduce the thermal properties of the exhaust wrap. Be aware of this before you decide to remove the wrap. For this reason, you should avoid wrapping any flex-pipes or flex-joints. Note about Titanium Exhaust Systems: DEI does NOT recommend wrapping exhausts made of titanium. The alloys used in the production of titanium exhaust systems tend to be thin and are designed to dissipate heat quickly. Wrapping any titanium exhaust pipe, regardless of brand, can hold in too much heat, and make the titanium alloy turn brittle and prone to premature cracking. If you are seeking to reduce the heat on a titanium exhaust system, DEI recommends using alternatives such as our flexible heat shields. Direct Heat Resistance: 1200°F Radiant Heat Resistance: 2000°F..
13.17€
Ex Tax:10.98€
Tan Glass Fiber Exhaust Wrap 5cm x 15m (2" x 50ft) DEI 010102 USA-DEI-10102 An important first step in reducing unwanted and power-robbing under hood heat is wrapping headers and down pipes. Less under hood radiant heat results in a cooler air charge for improved performance and keeping exhaust gases hotter within the exhaust system helps in decreasing exhaust density & increases exhaust flow. Design Engineering Stainless Steel Locking Ties are the perfect way to fasten exhaust wrap for a easy, clean and professional installation. Reduce under hood temperatures a realistic 50% Decreases exhaust density & increases exhaust flow Improves horsepower Withstands 1200°F direct/2000°F radiant Only exhaust wrap with installation guide lines Added durability and heat retention NOTE: Design Engineering HT Silicone Coating spray is highly recommended for DEI glass fiber wrap to penetrate, seal, protect and prolong the lifespan of exhaust wrap. NOTE: Wrapping of the catalytic converter is not recommended, as overheating can lead to reduced lifetime of the converter. Instead, try our Corvette Catalytic Converter Shield or create your own shield using our Floor & Tunnel Shield II™. Note of Caution: Wrap is not designed to be moved or removed after it has been heat cycled. After the fibers have been heated, they lose their initial flexibility. This does not reduce the thermal properties of the exhaust wrap. Be aware of this before you decide to remove the wrap. For this reason, you should avoid wrapping any flex-pipes or flex-joints. Note about Titanium Exhaust Systems: DEI does NOT recommend wrapping exhausts made of titanium. The alloys used in the production of titanium exhaust systems tend to be thin and are designed to dissipate heat quickly. Wrapping any titanium exhaust pipe, regardless of brand, can hold in too much heat, and make the titanium alloy turn brittle and prone to premature cracking. If you are seeking to reduce the heat on a titanium exhaust system, DEI recommends using alternatives such as our flexible heat shields. Direct Heat Resistance: 1200°F Radiant Heat Resistance: 2000°F..
63.41€
Ex Tax:52.85€
Tan Glass Fiber Exhaust Wrap 5cm x 30m (2" x 100ft) DEI 010103 USA-DEI-10103 An important first step in reducing unwanted and power-robbing under hood heat is wrapping headers and down pipes. Less under hood radiant heat results in a cooler air charge for improved performance and keeping exhaust gases hotter within the exhaust system helps in decreasing exhaust density & increases exhaust flow. Design Engineering Stainless Steel Locking Ties are the perfect way to fasten exhaust wrap for a easy, clean and professional installation. Reduce under hood temperatures a realistic 50% Decreases exhaust density & increases exhaust flow Improves horsepower Withstands 1200°F direct/2000°F radiant Only exhaust wrap with installation guide lines Added durability and heat retention NOTE: Design Engineering HT Silicone Coating spray is highly recommended for DEI glass fiber wrap to penetrate, seal, protect and prolong the lifespan of exhaust wrap. NOTE: Wrapping of the catalytic converter is not recommended, as overheating can lead to reduced lifetime of the converter. Instead, try our Corvette Catalytic Converter Shield or create your own shield using our Floor & Tunnel Shield II™. Note of Caution: Wrap is not designed to be moved or removed after it has been heat cycled. After the fibers have been heated, they lose their initial flexibility. This does not reduce the thermal properties of the exhaust wrap. Be aware of this before you decide to remove the wrap. For this reason, you should avoid wrapping any flex-pipes or flex-joints. Note about Titanium Exhaust Systems: DEI does NOT recommend wrapping exhausts made of titanium. The alloys used in the production of titanium exhaust systems tend to be thin and are designed to dissipate heat quickly. Wrapping any titanium exhaust pipe, regardless of brand, can hold in too much heat, and make the titanium alloy turn brittle and prone to premature cracking. If you are seeking to reduce the heat on a titanium exhaust system, DEI recommends using alternatives such as our flexible heat shields. Direct Heat Resistance: 1200°F Radiant Heat Resistance: 2000°F..
112.20€
Ex Tax:93.50€
Tan Glass Fiber Exhaust Wrap 5cm x 4.5m (2" x 15ft) DEI 010106 USA-DEI-10106 An important first step in reducing unwanted and power-robbing under hood heat is wrapping headers and down pipes. Less under hood radiant heat results in a cooler air charge for improved performance and keeping exhaust gases hotter within the exhaust system helps in decreasing exhaust density & increases exhaust flow. Design Engineering Stainless Steel Locking Ties are the perfect way to fasten exhaust wrap for a easy, clean and professional installation. Reduce under hood temperatures a realistic 50% Decreases exhaust density & increases exhaust flow Improves horsepower Withstands 1200°F direct/2000°F radiant Only exhaust wrap with installation guide lines Added durability and heat retention NOTE: Design Engineering HT Silicone Coating spray is highly recommended for DEI glass fiber wrap to penetrate, seal, protect and prolong the lifespan of exhaust wrap. NOTE: Wrapping of the catalytic converter is not recommended, as overheating can lead to reduced lifetime of the converter. Instead, try our Corvette Catalytic Converter Shield or create your own shield using our Floor & Tunnel Shield II™. Note of Caution: Wrap is not designed to be moved or removed after it has been heat cycled. After the fibers have been heated, they lose their initial flexibility. This does not reduce the thermal properties of the exhaust wrap. Be aware of this before you decide to remove the wrap. For this reason, you should avoid wrapping any flex-pipes or flex-joints. Note about Titanium Exhaust Systems: DEI does NOT recommend wrapping exhausts made of titanium. The alloys used in the production of titanium exhaust systems tend to be thin and are designed to dissipate heat quickly. Wrapping any titanium exhaust pipe, regardless of brand, can hold in too much heat, and make the titanium alloy turn brittle and prone to premature cracking. If you are seeking to reduce the heat on a titanium exhaust system, DEI recommends using alternatives such as our flexible heat shields. Direct Heat Resistance: 1200°F Radiant Heat Resistance: 2000°F..
20.39€
Ex Tax:16.99€
Thermal tape DEI 5cm x 4.5m, black Manufacturer: DEI Article number: DEI-10121..
20.39€
Ex Tax:16.99€
Thermal sleeve cool-tube extreme, for hoses and cables DEI - 1.25in x 91cm (black) Able to reflect continuous heat up to 750°F while offering a quality profession look, Cool Tube Extreme™ is flexible enough to conform to tight bends and provide superior protection against extreme under hood temperatures, weather conditions and abrasions. Made from a special composite material with a spiral wire reinforcement, Cool Tube Extreme™ is ultra-light that can be slit lengthwise to apply to cables, wires and hoses. Trim to length Can be slit lengthwise for easy install Tough, durable with an easy to clean finish Direct Heat Resistance: 750°F..
43.91€
Ex Tax:36.59€
thermal sleeve cool-tube extreme, for hoses and cables DEI - 1.25in x 91cm (blue) DEI 10435 Able to reflect continuous heat up to 750°F while offering a quality profession look, Cool Tube Extreme™ is flexible enough to conform to tight bends and provide superior protection against extreme under hood temperatures, weather conditions and abrasions. Made from a special composite material with a spiral wire reinforcement, Cool Tube Extreme™ is ultra-light that can be slit lengthwise to apply to cables, wires and hoses. Trim to length Can be slit lengthwise for easy install Tough, durable with an easy to clean finish Direct Heat Resistance: 750°F..
36.00€
Ex Tax:30.00€
Thermal sleeve cool-tube extreme, for hoses and cables DEI - 1.25in x 91cm (silver) Able to reflect continuous heat up to 750°F while offering a quality profession look, Cool Tube Extreme™ is flexible enough to conform to tight bends and provide superior protection against extreme under hood temperatures, weather conditions and abrasions. Made from a special composite material with a spiral wire reinforcement, Cool Tube Extreme™ is ultra-light that can be slit lengthwise to apply to cables, wires and hoses. Trim to length Can be slit lengthwise for easy install Tough, durable with an easy to clean finish Direct Heat Resistance: 750°F..
34.15€
Ex Tax:28.46€
Thermal sleeve cool-tube extreme, for hoses and cables DEI - 1.5in x 91cm (black) Able to reflect continuous heat up to 750°F while offering a quality profession look, Cool Tube Extreme™ is flexible enough to conform to tight bends and provide superior protection against extreme under hood temperatures, weather conditions and abrasions. Made from a special composite material with a spiral wire reinforcement, Cool Tube Extreme™ is ultra-light that can be slit lengthwise to apply to cables, wires and hoses. Trim to length Can be slit lengthwise for easy install Tough, durable with an easy to clean finish Direct Heat Resistance: 750°F..
47.81€
Ex Tax:39.84€
thermal sleeve cool-tube extreme, for hoses and cables DEI - 1.5in x 91cm (silver) Able to reflect continuous heat up to 750°F while offering a quality profession look, Cool Tube Extreme™ is flexible enough to conform to tight bends and provide superior protection against extreme under hood temperatures, weather conditions and abrasions. Made from a special composite material with a spiral wire reinforcement, Cool Tube Extreme™ is ultra-light that can be slit lengthwise to apply to cables, wires and hoses. Trim to length Can be slit lengthwise for easy install Tough, durable with an easy to clean finish Direct Heat Resistance: 750°F..
32.20€
Ex Tax:26.83€
Thermal sleeve cool-tube extreme, for hoses and cables DEI - 1/2in x 2.7m (silver) Able to reflect continuous heat up to 750°F while offering a quality profession look, Cool Tube Extreme™ is flexible enough to conform to tight bends and provide superior protection against extreme under hood temperatures, weather conditions and abrasions. Made from a special composite material with a spiral wire reinforcement, Cool Tube Extreme™ is ultra-light that can be slit lengthwise to apply to cables, wires and hoses. Trim to length Can be slit lengthwise for easy install Tough, durable with an easy to clean finish Direct Heat Resistance: 750°F..
63.42€
Ex Tax:52.85€
Thermal sleeve cool-tube extreme, for hoses and cables DEI - 1/2in x 91cm (silver) USA-DEI-10421 Able to reflect continuous heat up to 750°F while offering a quality profession look, Cool Tube Extreme™ is flexible enough to conform to tight bends and provide superior protection against extreme under hood temperatures, weather conditions and abrasions. Made from a special composite material with a spiral wire reinforcement, Cool Tube Extreme™ is ultra-light that can be slit lengthwise to apply to cables, wires and hoses. Trim to length Can be slit lengthwise for easy install Tough, durable with an easy to clean finish Direct Heat Resistance: 750°F..
18.05€
Ex Tax:15.04€
thermal sleeve cool-tube extreme, for hoses and cables DEI - 1in x 91cm (silver) USA-DEI-10429 Able to reflect continuous heat up to 750°F while offering a quality profession look, Cool Tube Extreme™ is flexible enough to conform to tight bends and provide superior protection against extreme under hood temperatures, weather conditions and abrasions. Made from a special composite material with a spiral wire reinforcement, Cool Tube Extreme™ is ultra-light that can be slit lengthwise to apply to cables, wires and hoses. Trim to length Can be slit lengthwise for easy install Tough, durable with an easy to clean finish Direct Heat Resistance: 750°F..
24.39€
Ex Tax:20.33€
Thermal sleeve cool-tube extreme, for hoses and cables DEI - 3/4in x 2.7m (black) Able to reflect continuous heat up to 750°F while offering a quality profession look, Cool Tube Extreme™ is flexible enough to conform to tight bends and provide superior protection against extreme under hood temperatures, weather conditions and abrasions. Made from a special composite material with a spiral wire reinforcement, Cool Tube Extreme™ is ultra-light that can be slit lengthwise to apply to cables, wires and hoses. Trim to length Can be slit lengthwise for easy install Tough, durable with an easy to clean finish Direct Heat Resistance: 750°F..
92.69€
Ex Tax:77.24€
Thermal sleeve cool-tube extreme, for hoses and cables DEI - 3/4in x 91cm (black)Producent: DEIKod produktu: DEI-10428 Able to reflect continuous heat up to 750°F while offering a quality profession look, Cool Tube Extreme™ is flexible enough to conform to tight bends and provide superior protection against extreme under hood temperatures, weather conditions and abrasions. Made from a special composite material with a spiral wire reinforcement, Cool Tube Extreme™ is ultra-light that can be slit lengthwise to apply to cables, wires and hoses. Trim to length Can be slit lengthwise for easy install Tough, durable with an easy to clean finish Direct Heat Resistance: 750°F..
34.15€
Ex Tax:28.46€
Thermal sleeve cool-tube extreme, for hoses and cables DEI - 3/4in x 91cm (silver) USA-DEI-10425 Able to reflect continuous heat up to 750°F while offering a quality profession look, Cool Tube Extreme™ is flexible enough to conform to tight bends and provide superior protection against extreme under hood temperatures, weather conditions and abrasions. Made from a special composite material with a spiral wire reinforcement, Cool Tube Extreme™ is ultra-light that can be slit lengthwise to apply to cables, wires and hoses. Trim to length Can be slit lengthwise for easy install Tough, durable with an easy to clean finish Direct Heat Resistance: 750°F..
22.34€
Ex Tax:18.62€
Thermal sleeve DEI Fire Sleeve, for cables, hoses and wires - 3/4in x 50cm Manufacturer: DEI SKU: DEI-010473B25..
13.17€
Ex Tax:10.98€
Thermal sleeve DEI Fire Sleeve, for hoses and cables - 1in x 91cm Fire Sleeve solves the problem of heat and abrasions damaging fuel, transmission and brake lines and is a fireproof solution. Constructed from a high temperature resistant braided glass material, woven into a sleeve and heavily coated with 100% iron oxide silicone rubber, Fire Sleeve thermal insulator sleeve provides the ultimate in heat insulation and protection from direct heat up to 500°F. Includes a 16-inch length of black Fire Tape, an adhesive-free, self-adhering tape, to finish off ends of Fire Sleeve or when joining two Fire Sleeves together while presenting a clean and professional look. Insulates wiring, hoses, oil / brakes / transmission lines & more Use for bundling & protecting hoses, electrical wiring, etc. Withstands 2000°F of intermittent heat Includes 16 inches of black Fire Tape Size: 0.375 (3/8) inch x 36 inches Radiant Heat Resistance: 2000°F Direct Heat Resistance: 500°F..
53.66€
Ex Tax:44.72€
Thermal sleeve DEI Fire Sleeve, for hoses and cables - 3/8in x 91cm Fire Sleeve solves the problem of heat and abrasions damaging fuel, transmission and brake lines and is a fireproof solution. Constructed from a high temperature resistant braided glass material, woven into a sleeve and heavily coated with 100% iron oxide silicone rubber, Fire Sleeve thermal insulator sleeve provides the ultimate in heat insulation and protection from direct heat up to 500°F. Includes a 16-inch length of black Fire Tape, an adhesive-free, self-adhering tape, to finish off ends of Fire Sleeve or when joining two Fire Sleeves together while presenting a clean and professional look. Insulates wiring, hoses, oil / brakes / transmission lines & more Use for bundling & protecting hoses, electrical wiring, etc. Withstands 2000°F of intermittent heat Includes 16 inches of black Fire Tape Size: 0.375 (3/8) inch x 36 inches Radiant Heat Resistance: 2000°F Direct Heat Resistance: 500°F..
34.15€
Ex Tax:28.46€
Thermal sleeve DEI Fire Sleeve, for hoses and cables - 5/8in x 91cm Fire Sleeve solves the problem of heat and abrasions damaging fuel, transmission and brake lines and is a fireproof solution. Constructed from a high temperature resistant braided glass material, woven into a sleeve and heavily coated with 100% iron oxide silicone rubber, Fire Sleeve thermal insulator sleeve provides the ultimate in heat insulation and protection from direct heat up to 500°F. Includes a 16-inch length of black Fire Tape, an adhesive-free, self-adhering tape, to finish off ends of Fire Sleeve or when joining two Fire Sleeves together while presenting a clean and professional look. Insulates wiring, hoses, oil / brakes / transmission lines & more Use for bundling & protecting hoses, electrical wiring, etc. Withstands 2000°F of intermittent heat Includes 16 inches of black Fire Tape Size: 0.375 (3/8) inch x 36 inches Radiant Heat Resistance: 2000°F Direct Heat Resistance: 500°F..
38.05€
Ex Tax:31.71€
Thermal sleeve DEI, for hoses and cables - 1.25in x 50cm..
15.51€
Ex Tax:12.93€
Thermal sleeve DEI, for hoses and cables - 1.25in x 91cm DEI 010404 USA-DEI-10404 Heat Sheath™ solves the problem of heat and abrasions causing failure of lines, hoses & wires. Designed to slide over wires, cables and hoses, Heat Sheath provides the ultimate protection from extreme heat as well as chemical and oil spills, dirt, grease and road grime. Constructed from a high temperature fabric and bonded to an aluminized material to reflect heat. Heat Sheath is fireproof and withstands direct heat up to 500°F. Pliable for tight bends Capable of withstanding 2000°F radiant heat Trim to desired length NOTE: Each diameter is available up to 50 ft lengths. Other diameters are also available as a special order. Items with custom cut patterns and/or custom cut lengths of material cannot be returned. Direct Heat Resistance: 500°F Radiant Heat Resistance: 2000°F..
22.34€
Ex Tax:18.62€
Thermal sleeve DEI, for hoses and cables - 1.5in x 15,2m..
13.17€
Ex Tax:10.98€
Thermal sleeve DEI, for hoses and cables - 1/2in x 91cm Manufacturer: DEI Article number: DEI-10418..
15.51€
Ex Tax:12.93€
Thermal sleeve DEI, for hoses and cables - 1in x 91cm Manufacturer: DEI Article number: DEI-010419..
20.39€
Ex Tax:16.99€
Thermal sleeve DEI, for hoses and cables - 3/4in x 91cm USA-DEI-10403 Heat Sheath™ solves the problem of heat and abrasions causing failure of lines, hoses & wires. Designed to slide over wires, cables and hoses, Heat Sheath provides the ultimate protection from extreme heat as well as chemical and oil spills, dirt, grease and road grime. Constructed from a high temperature fabric and bonded to an aluminized material to reflect heat. Heat Sheath is fireproof and withstands direct heat up to 500°F. Pliable for tight bends Capable of withstanding 2000°F radiant heat Trim to desired length NOTE: Each diameter is available up to 50 ft lengths. Other diameters are also available as a special order. Items with custom cut patterns and/or custom cut lengths of material cannot be returned. Direct Heat Resistance: 500°F Radiant Heat Resistance: 2000°F..
15.51€
Ex Tax:12.93€
Thermal sleeve Gold DEI Heat Sheath for hoses and cables - 1.25in x 91cm DEI 010915 USA-DEI-10915 Heat Sheath GOLD™ solves the problem of heat and abrasions causing failure of lines, hoses & wires. DEI Heat Sheath GOLD is manufactured from our high temperature metalized polyimide lamination, bonded to a robust 20oz. heat treated glass fiber base material, the DEI line of GOLD™ sleeving will protect and keep components cool in the most demanding applications. Able to reflect radiant heat up to 800°F makes DEI GOLD line sleeving the perfect choice to keep critical lines, air intakes and hoses cool and protected. 20oz. heat treated base glass Metalized Polyimide lamination Base glass rated to 1100°F Radiant Heat Resistance: 800°F..
38.05€
Ex Tax:31.71€
Thermal sleeve Gold DEI Heat Sheath for hoses and cables - 1/2in x 91cm DEI 010916 USA-DEI-10916 Heat Sheath GOLD™ solves the problem of heat and abrasions causing failure of lines, hoses & wires. DEI Heat Sheath GOLD is manufactured from our high temperature metalized polyimide lamination, bonded to a robust 20oz. heat treated glass fiber base material, the DEI line of GOLD™ sleeving will protect and keep components cool in the most demanding applications. Able to reflect radiant heat up to 800°F makes DEI GOLD line sleeving the perfect choice to keep critical lines, air intakes and hoses cool and protected. 20oz. heat treated base glass Metalized Polyimide lamination Base glass rated to 1100°F Radiant Heat Resistance: 800°F..
24.39€
Ex Tax:20.33€
Thermal sleeve Gold DEI Heat Sheath for hoses and cables - 1in x 91cm DEI 010917 USA-DEI-10917 Heat Sheath GOLD™ solves the problem of heat and abrasions causing failure of lines, hoses & wires. DEI Heat Sheath GOLD is manufactured from our high temperature metalized polyimide lamination, bonded to a robust 20oz. heat treated glass fiber base material, the DEI line of GOLD™ sleeving will protect and keep components cool in the most demanding applications. Able to reflect radiant heat up to 800°F makes DEI GOLD line sleeving the perfect choice to keep critical lines, air intakes and hoses cool and protected. 20oz. heat treated base glass Metalized Polyimide lamination Base glass rated to 1100°F Radiant Heat Resistance: 800°F..
32.20€
Ex Tax:26.83€
Thermal sleeve Gold DEI Heat Sheath for hoses and cables - 3/4in x 91cm DEI 010914 USA-DEI-10914 Heat Sheath GOLD™ solves the problem of heat and abrasions causing failure of lines, hoses & wires. DEI Heat Sheath GOLD is manufactured from our high temperature metalized polyimide lamination, bonded to a robust 20oz. heat treated glass fiber base material, the DEI line of GOLD™ sleeving will protect and keep components cool in the most demanding applications. Able to reflect radiant heat up to 800°F makes DEI GOLD line sleeving the perfect choice to keep critical lines, air intakes and hoses cool and protected. 20oz. heat treated base glass Metalized Polyimide lamination Base glass rated to 1100°F Radiant Heat Resistance: 800°F..
28.29€
Ex Tax:23.58€
Thermal sleeve Heat Shroud - 1/2in - 1.25in x 91cm DEI 10405 USA-DEI-10405 Heat Shroud™ 10405 Heat Shroud™ solves the problem of heat and abrasions causing failure of lines, hoses and wires without the need to disconnect them. Heat Shroud is made from a high temperature rated glass fiber fabric with an aluminized outer facing. Same as Heat Sheath but with the added convenience of hook & loop closure design along the open edges. Without the need of removing one end of connected wires, cables and hoses, simply wrap Heat Shroud around whatever needs protection and close edges. Heat Shroud protects against oil, dirt, road grime and is fireproof, can be shaped to fit the tightest bends and is available in multiple sizes to offer the versatility of fitting diameters from 0.5 - 2.5 inches. No need to remove wires and hoses Convenient hook & loop closure design Available is sizes ranging 0.5 - 2.5 inches in diameter Reflects 90% of radiant heat Easily trim to length Direct Heat Resistance: 500°F..
44.78€
Ex Tax:37.32€
Thermal sleeve Heat Shroud - 2in - 2 1/2in x 91cm DEI 010487 USA-DEI-10487 Heat Shroud™ 010487 Heat Shroud™ solves the problem of heat and abrasions causing failure of lines, hoses and wires without the need to disconnect them. Heat Shroud is made from a high temperature rated glass fiber fabric with an aluminized outer facing. Same as Heat Sheath but with the added convenience of hook & loop closure design along the open edges. Without the need of removing one end of connected wires, cables and hoses, simply wrap Heat Shroud around whatever needs protection and close edges. Heat Shroud protects against oil, dirt, road grime and is fireproof, can be shaped to fit the tightest bends and is available in multiple sizes to offer the versatility of fitting diameters from 0.5 - 2.5 inches. No need to remove wires and hoses Convenient hook & loop closure design Available is sizes ranging 0.5 - 2.5 inches in diameter Reflects 90% of radiant heat Easily trim to length Direct Heat Resistance: 500°F..
44.78€
Ex Tax:37.32€
Thermal sleeve Heat Shroud - 3/4" x 91cm DEI 010457 USA-DEI-10457 Heat Shroud™ 010457 Heat Shroud™ solves the problem of heat and abrasions causing failure of lines, hoses and wires without the need to disconnect them. Heat Shroud is made from a high temperature rated glass fiber fabric with an aluminized outer facing. Same as Heat Sheath but with the added convenience of hook & loop closure design along the open edges. Without the need of removing one end of connected wires, cables and hoses, simply wrap Heat Shroud around whatever needs protection and close edges. Heat Shroud protects against oil, dirt, road grime and is fireproof, can be shaped to fit the tightest bends and is available in multiple sizes to offer the versatility of fitting diameters from 0.5 - 2.5 inches. No need to remove wires and hoses Convenient hook & loop closure design Available is sizes ranging 0.5 - 2.5 inches in diameter Reflects 90% of radiant heat Easily trim to length Direct Heat Resistance: 500°F..
31.22€
Ex Tax:26.02€
Thermal sleeve Heat Shroud Gold - 0.5-1.25" x 91cm DEI 010458 USA-DEI-010458 Heat Shroud GOLD™ solves the problem of heat and abrasions causing failure of lines, hoses and wires without the need to disconnect them. High temperature Metalized Polyimide lamination, bonded to a robust 20oz heat treated glass fiber base material, Heat Shroud GOLD will protect and keep components cool in the most demanding applications. Able to reflect radiant heat up to 800°F makes Heat Shroud GOLD the perfect choice to keep critical lines cool and protected. The added convenience of hook & loop closure eliminates the need of removing one end of connected wires, cables and hoses to install. Fits 0.5" to 1.25" diameter x 36" length 20oz. heat treated base glass Metalized Polyimide lamination Base glass rated to 1100°F High temperature hook & loop Radiant Heat Resistance: 800°F..
47.80€
Ex Tax:39.84€
Speed Sleeves provide everything you need to cover and protect primary exhaust header pipes. An alternative to wrapping complete headers and ideal for spot protection from heat generating pipes and manifolds. They are easily installed in tight engine compartments. Great for trouble shooting specific components that are close to the exhaust header like ignition wires or fuel line. Serves as an insulator & radiant heat barrier Quick & simple installation Supplied wrap covers pipes up to 2.5" diameter 4 & 6 Cylinder Kit Includes: 12 ft x 8" wide exhaust wrap Lock fasteners Locking Ties 8 Cylinder Kit Includes: 16 ft x 8" wide exhaust wrap Lock fasteners Locking Ties Direct Heat Resistance: 1200°F Radiant Heat Resistance: 2000°F Color: Tan ..
112.20€
Ex Tax:93.50€
Speed Sleeves provide everything you need to cover and protect primary exhaust header pipes. An alternative to wrapping complete headers and ideal for spot protection from heat generating pipes and manifolds. They are easily installed in tight engine compartments. Great for trouble shooting specific components that are close to the exhaust header like ignition wires or fuel line. Serves as an insulator & radiant heat barrier Quick & simple installation Supplied wrap covers pipes up to 2.5" diameter 4 & 6 Cylinder Kit Includes: 12 ft x 8" wide exhaust wrap Lock fasteners Locking Ties 8 Cylinder Kit Includes: 16 ft x 8" wide exhaust wrap Lock fasteners Locking Ties Direct Heat Resistance: 1200°F Radiant Heat Resistance: 2000°F Color: Tan..
141.46€
Ex Tax:117.89€
Glass Fiber Exhaust Wraps solve the problem of extreme underhood heat and improve exhaust system performance. Wrapping headers and down pipes is an important first step in reducing unwanted and power-robbing under hood heat. Less under hood heat results in a cooler air charge for improved performance and keeping exhaust gases hotter within the exhaust system helps in decreasing exhaust density & increases exhaust flow. Design Engineering Stainless Steel Locking Ties are the perfect way to fasten exhaust wrap for a easy, clean and professional installation. Reduce under hood temperatures a realistic 50% Decreases exhaust density & increases exhaust flow Improves horsepower Withstands 1200°F direct/2000°F radiant Only exhaust wrap with installation guide lines Added durability and heat retention NOTE: Catalytic Convertors: Wrapping of the catalytic converter is not recommended, as overheating can lead to reduced lifetime of the converter. Instead, try our Corvette Catalytic Converter Shield or create your own shield using our Floor & Tunnel Shield II™. Removal: Exhaust wrap is not designed to be moved or removed after it has been heat cycled. After the fibers have been heated, they lose their initial flexibility. This does not reduce the thermal properties of the exhaust wrap. Be aware of this before you decide to remove the wrap. For this reason, you should avoid wrapping any flex-pipes or flex-joints. Titanium Exhaust Pipe Systems: DEI does NOT recommend wrapping exhausts made of titanium. The alloys used in the production of titanium exhaust systems tend to be thin and are designed to dissipate heat quickly. Wrapping any titanium exhaust pipe, regardless of brand, can hold in too much heat, and make the titanium alloy turn brittle and prone to premature cracking. If you are seeking to reduce the heat on a titanium exhaust system, DEI recommends using alternatives such as our flexible heat shields. Color Fade: While the performance and properties of black exhaust wrap does not deteriorate, the black color will fade over time and with use. It will fade faster in higher heat applications such as during racing and on turbo manifolds. If it does fade, it will fade to the color of the original tan wrap. It can be coated with HT Silicone Coating Spray to give it a longer lasting black finish. Design Engineering HT Silicone Coating spray is highly recommended for DEI glass fiber wrap to penetrate, seal, protect and prolong the lifespan of exhaust wrap. Direct Heat Resistance: 1200°F Radiant Heat Resistance: 2000°F Color: Black..
15.51€
Ex Tax:12.93€
Thermal tape DEI Cool-Tape, 1.5in x 4,5m DEI 010408 USA-DEI-10408 Cool Tape™ is a flexible and super strong self-adhesive thermal insulating tape capable of protecting up to 2000°F of radiant heat. Made of one mil aluminized material bonded to a woven glass fiber heat resistant matting, Cool Tape™ is a ultra light weight heat reflective solution for wrapping wires, cables, hoses, fuel lines, covering seams and many other uses. Withstands direct heat up to 400°F Use to secure panels, seal air boxes, wrap wiring & more Strong self-adhesive backing Perfect for giving Reflect-A-Cool, Heat Screen and Floor & Tunnel Shield II a finished edge look! Direct Heat Resistance: 400°F Radiant Heat Resistance: 2000°F..
19.41€
Ex Tax:16.18€
Thermal Tape DEI Titanium 2.5cm x 15m (1in x 50ft) DEI 010126 USA-DEI-10126 DEI's ORIGINAL Titanium™ exhaust wrap, with LR Technology, is made from pulverized lava rock, stranded into a fiber material and woven into a proprietary weave. Titanium wrap is engineered to be stronger than most wraps and more durable for improved thermal performance and reliability. Perfect for any automotive or motorcycle application! Withstands 1800˚F direct/2500˚F intermittent heat Promotes increased flow for improved performance Reduces temperature & vibration breakdown Extremely pliable for a tight and secure wrap DEI HT Silicone Coating not required Pre-wetting roll not necessary for wrapping Hi-tech carbon fiber look High resistance to abrasions, oil spills, temperatures and vibration breakdown NOTE: Wrapping of the catalytic converter is not recommended, as overheating can lead to reduced lifetime of the converter. Instead, try our Corvette Catalytic Converter Shield or create your own shield using our Floor & Tunnel Shield II™. Note of Caution: Wrap is not designed to be moved or removed after it has been heat cycled. After the fibers have been heated, they lose their initial flexibility. This does not reduce the thermal properties of the exhaust wrap. Be aware of this before you decide to remove the wrap. For this reason, you should avoid wrapping any flex-pipes or flex-joints. Note about Titanium Exhaust Systems: DEI does NOT recommend wrapping exhausts made of titanium. The alloys used in the production of titanium exhaust systems tend to be thin and are designed to dissipate heat quickly. Wrapping any titanium exhaust pipe, regardless of brand, can hold in too much heat, and make the titanium alloy turn brittle and prone to premature cracking. If you are seeking to reduce the heat on a titanium exhaust system, DEI recommends using alternatives such as our flexible heat shields. Direct Heat Resistance: 1800°F Radiant Heat Resistance: 2500°F..
44.78€
Ex Tax:37.32€
Thermal Tape DEI Titanium 2.5cm x 30m (1in x 100ft) DEI 010133 USA-DEI-10133 DEI's ORIGINAL Titanium™ exhaust wrap, with LR Technology, is made from pulverized lava rock, stranded into a fiber material and woven into a proprietary weave. Titanium wrap is engineered to be stronger than most wraps and more durable for improved thermal performance and reliability. Perfect for any automotive or motorcycle application! Withstands 1800˚F direct/2500˚F intermittent heat Promotes increased flow for improved performance Reduces temperature & vibration breakdown Extremely pliable for a tight and secure wrap DEI HT Silicone Coating not required Pre-wetting roll not necessary for wrapping Hi-tech carbon fiber look High resistance to abrasions, oil spills, temperatures and vibration breakdown NOTE: Wrapping of the catalytic converter is not recommended, as overheating can lead to reduced lifetime of the converter. Instead, try our Corvette Catalytic Converter Shield or create your own shield using our Floor & Tunnel Shield II™. Note of Caution: Wrap is not designed to be moved or removed after it has been heat cycled. After the fibers have been heated, they lose their initial flexibility. This does not reduce the thermal properties of the exhaust wrap. Be aware of this before you decide to remove the wrap. For this reason, you should avoid wrapping any flex-pipes or flex-joints. Note about Titanium Exhaust Systems: DEI does NOT recommend wrapping exhausts made of titanium. The alloys used in the production of titanium exhaust systems tend to be thin and are designed to dissipate heat quickly. Wrapping any titanium exhaust pipe, regardless of brand, can hold in too much heat, and make the titanium alloy turn brittle and prone to premature cracking. If you are seeking to reduce the heat on a titanium exhaust system, DEI recommends using alternatives such as our flexible heat shields. Direct Heat Resistance: 1800°F Radiant Heat Resistance: 2500°F..
92.68€
Ex Tax:77.24€
Thermal Tape DEI Titanium 2.5cm x 4.5m (1in x 15ft) DEI 010128 USA-DEI-10128 DEI's ORIGINAL Titanium™ exhaust wrap, with LR Technology, is made from pulverized lava rock, stranded into a fiber material and woven into a proprietary weave. Titanium wrap is engineered to be stronger than most wraps and more durable for improved thermal performance and reliability. Perfect for any automotive or motorcycle application! Withstands 1800˚F direct/2500˚F intermittent heat Promotes increased flow for improved performance Reduces temperature & vibration breakdown Extremely pliable for a tight and secure wrap DEI HT Silicone Coating not required Pre-wetting roll not necessary for wrapping Hi-tech carbon fiber look High resistance to abrasions, oil spills, temperatures and vibration breakdown NOTE: Wrapping of the catalytic converter is not recommended, as overheating can lead to reduced lifetime of the converter. Instead, try our Corvette Catalytic Converter Shield or create your own shield using our Floor & Tunnel Shield II™. Note of Caution: Wrap is not designed to be moved or removed after it has been heat cycled. After the fibers have been heated, they lose their initial flexibility. This does not reduce the thermal properties of the exhaust wrap. Be aware of this before you decide to remove the wrap. For this reason, you should avoid wrapping any flex-pipes or flex-joints. Note about Titanium Exhaust Systems: DEI does NOT recommend wrapping exhausts made of titanium. The alloys used in the production of titanium exhaust systems tend to be thin and are designed to dissipate heat quickly. Wrapping any titanium exhaust pipe, regardless of brand, can hold in too much heat, and make the titanium alloy turn brittle and prone to premature cracking. If you are seeking to reduce the heat on a titanium exhaust system, DEI recommends using alternatives such as our flexible heat shields. Direct Heat Resistance: 1800°F Radiant Heat Resistance: 2500°F..
19.41€
Ex Tax:16.18€
Thermal Tape DEI Titanium 5cm x 10.1m (2in x 33ft) DEI 010125 USA-DEI-10125 DEI's ORIGINAL Titanium™ exhaust wrap, with LR Technology, is made from pulverized lava rock, stranded into a fiber material and woven into a proprietary weave. Titanium wrap is engineered to be stronger than most wraps and more durable for improved thermal performance and reliability. Perfect for any automotive or motorcycle application! Withstands 1800˚F direct/2500˚F intermittent heat Promotes increased flow for improved performance Reduces temperature & vibration breakdown Extremely pliable for a tight and secure wrap DEI HT Silicone Coating not required Pre-wetting roll not necessary for wrapping Hi-tech carbon fiber look High resistance to abrasions, oil spills, temperatures and vibration breakdown NOTE: Wrapping of the catalytic converter is not recommended, as overheating can lead to reduced lifetime of the converter. Instead, try our Corvette Catalytic Converter Shield or create your own shield using our Floor & Tunnel Shield II™. Note of Caution: Wrap is not designed to be moved or removed after it has been heat cycled. After the fibers have been heated, they lose their initial flexibility. This does not reduce the thermal properties of the exhaust wrap. Be aware of this before you decide to remove the wrap. For this reason, you should avoid wrapping any flex-pipes or flex-joints. Note about Titanium Exhaust Systems: DEI does NOT recommend wrapping exhausts made of titanium. The alloys used in the production of titanium exhaust systems tend to be thin and are designed to dissipate heat quickly. Wrapping any titanium exhaust pipe, regardless of brand, can hold in too much heat, and make the titanium alloy turn brittle and prone to premature cracking. If you are seeking to reduce the heat on a titanium exhaust system, DEI recommends using alternatives such as our flexible heat shields. Direct Heat Resistance: 1800°F Radiant Heat Resistance: 2500°F..
47.80€
Ex Tax:39.84€
Thermal Tape DEI Titanium 5cm x 10.6m (2in x 35ft) DEI 010132 USA-DEI-10132 DEI's ORIGINAL Titanium™ exhaust wrap, with LR Technology, is made from pulverized lava rock, stranded into a fiber material and woven into a proprietary weave. Titanium wrap is engineered to be stronger than most wraps and more durable for improved thermal performance and reliability. Perfect for any automotive or motorcycle application! Withstands 1800˚F direct/2500˚F intermittent heat Promotes increased flow for improved performance Reduces temperature & vibration breakdown Extremely pliable for a tight and secure wrap DEI HT Silicone Coating not required Pre-wetting roll not necessary for wrapping Hi-tech carbon fiber look High resistance to abrasions, oil spills, temperatures and vibration breakdown NOTE: Wrapping of the catalytic converter is not recommended, as overheating can lead to reduced lifetime of the converter. Instead, try our Corvette Catalytic Converter Shield or create your own shield using our Floor & Tunnel Shield II™. Note of Caution: Wrap is not designed to be moved or removed after it has been heat cycled. After the fibers have been heated, they lose their initial flexibility. This does not reduce the thermal properties of the exhaust wrap. Be aware of this before you decide to remove the wrap. For this reason, you should avoid wrapping any flex-pipes or flex-joints. Note about Titanium Exhaust Systems: DEI does NOT recommend wrapping exhausts made of titanium. The alloys used in the production of titanium exhaust systems tend to be thin and are designed to dissipate heat quickly. Wrapping any titanium exhaust pipe, regardless of brand, can hold in too much heat, and make the titanium alloy turn brittle and prone to premature cracking. If you are seeking to reduce the heat on a titanium exhaust system, DEI recommends using alternatives such as our flexible heat shields. Direct Heat Resistance: 1800°F Radiant Heat Resistance: 2500°F..
47.80€
Ex Tax:39.84€
Thermal Tape DEI Titanium 5cm x 15m (2in x 50ft) DEI 010127 USA-DEI-10127 DEI's ORIGINAL Titanium™ exhaust wrap, with LR Technology, is made from pulverized lava rock, stranded into a fiber material and woven into a proprietary weave. Titanium wrap is engineered to be stronger than most wraps and more durable for improved thermal performance and reliability. Perfect for any automotive or motorcycle application! Withstands 1800˚F direct/2500˚F intermittent heat Promotes increased flow for improved performance Reduces temperature & vibration breakdown Extremely pliable for a tight and secure wrap DEI HT Silicone Coating not required Pre-wetting roll not necessary for wrapping Hi-tech carbon fiber look High resistance to abrasions, oil spills, temperatures and vibration breakdown NOTE: Wrapping of the catalytic converter is not recommended, as overheating can lead to reduced lifetime of the converter. Instead, try our Corvette Catalytic Converter Shield or create your own shield using our Floor & Tunnel Shield II™. Note of Caution: Wrap is not designed to be moved or removed after it has been heat cycled. After the fibers have been heated, they lose their initial flexibility. This does not reduce the thermal properties of the exhaust wrap. Be aware of this before you decide to remove the wrap. For this reason, you should avoid wrapping any flex-pipes or flex-joints. Note about Titanium Exhaust Systems: DEI does NOT recommend wrapping exhausts made of titanium. The alloys used in the production of titanium exhaust systems tend to be thin and are designed to dissipate heat quickly. Wrapping any titanium exhaust pipe, regardless of brand, can hold in too much heat, and make the titanium alloy turn brittle and prone to premature cracking. If you are seeking to reduce the heat on a titanium exhaust system, DEI recommends using alternatives such as our flexible heat shields. Direct Heat Resistance: 1800°F Radiant Heat Resistance: 2500°F..
77.07€
Ex Tax:64.23€
Thermal Tape DEI Titanium 5cm x 30m (2in x 100ft) DEI 010130 USA-DEI-10130 DEI's ORIGINAL Titanium™ exhaust wrap, with LR Technology, is made from pulverized lava rock, stranded into a fiber material and woven into a proprietary weave. Titanium wrap is engineered to be stronger than most wraps and more durable for improved thermal performance and reliability. Perfect for any automotive or motorcycle application! Withstands 1800˚F direct/2500˚F intermittent heat Promotes increased flow for improved performance Reduces temperature & vibration breakdown Extremely pliable for a tight and secure wrap DEI HT Silicone Coating not required Pre-wetting roll not necessary for wrapping Hi-tech carbon fiber look High resistance to abrasions, oil spills, temperatures and vibration breakdown NOTE: Wrapping of the catalytic converter is not recommended, as overheating can lead to reduced lifetime of the converter. Instead, try our Corvette Catalytic Converter Shield or create your own shield using our Floor & Tunnel Shield II™. Note of Caution: Wrap is not designed to be moved or removed after it has been heat cycled. After the fibers have been heated, they lose their initial flexibility. This does not reduce the thermal properties of the exhaust wrap. Be aware of this before you decide to remove the wrap. For this reason, you should avoid wrapping any flex-pipes or flex-joints. Note about Titanium Exhaust Systems: DEI does NOT recommend wrapping exhausts made of titanium. The alloys used in the production of titanium exhaust systems tend to be thin and are designed to dissipate heat quickly. Wrapping any titanium exhaust pipe, regardless of brand, can hold in too much heat, and make the titanium alloy turn brittle and prone to premature cracking. If you are seeking to reduce the heat on a titanium exhaust system, DEI recommends using alternatives such as our flexible heat shields. Direct Heat Resistance: 1800°F Radiant Heat Resistance: 2500°F..
135.61€
Ex Tax:113.01€
Thermal Tape DEI Titanium 5cm x 4.5m (2in x 15ft) DEI 010129 USA-DEI-10129 DEI's ORIGINAL Titanium™ exhaust wrap, with LR Technology, is made from pulverized lava rock, stranded into a fiber material and woven into a proprietary weave. Titanium wrap is engineered to be stronger than most wraps and more durable for improved thermal performance and reliability. Perfect for any automotive or motorcycle application! Withstands 1800˚F direct/2500˚F intermittent heat Promotes increased flow for improved performance Reduces temperature & vibration breakdown Extremely pliable for a tight and secure wrap DEI HT Silicone Coating not required Pre-wetting roll not necessary for wrapping Hi-tech carbon fiber look High resistance to abrasions, oil spills, temperatures and vibration breakdown NOTE: Wrapping of the catalytic converter is not recommended, as overheating can lead to reduced lifetime of the converter. Instead, try our Corvette Catalytic Converter Shield or create your own shield using our Floor & Tunnel Shield II™. Note of Caution: Wrap is not designed to be moved or removed after it has been heat cycled. After the fibers have been heated, they lose their initial flexibility. This does not reduce the thermal properties of the exhaust wrap. Be aware of this before you decide to remove the wrap. For this reason, you should avoid wrapping any flex-pipes or flex-joints. Note about Titanium Exhaust Systems: DEI does NOT recommend wrapping exhausts made of titanium. The alloys used in the production of titanium exhaust systems tend to be thin and are designed to dissipate heat quickly. Wrapping any titanium exhaust pipe, regardless of brand, can hold in too much heat, and make the titanium alloy turn brittle and prone to premature cracking. If you are seeking to reduce the heat on a titanium exhaust system, DEI recommends using alternatives such as our flexible heat shields. Direct Heat Resistance: 1800°F Radiant Heat Resistance: 2500°F..
24.39€
Ex Tax:20.33€
Thermal Tape DEI Titanium 5cm x 7.5m (2in x 25ft) DEI 010131 USA-DEI-10131 DEI's ORIGINAL Titanium™ exhaust wrap, with LR Technology, is made from pulverized lava rock, stranded into a fiber material and woven into a proprietary weave. Titanium wrap is engineered to be stronger than most wraps and more durable for improved thermal performance and reliability. Perfect for any automotive or motorcycle application! Withstands 1800˚F direct/2500˚F intermittent heat Promotes increased flow for improved performance Reduces temperature & vibration breakdown Extremely pliable for a tight and secure wrap DEI HT Silicone Coating not required Pre-wetting roll not necessary for wrapping Hi-tech carbon fiber look High resistance to abrasions, oil spills, temperatures and vibration breakdown NOTE: Wrapping of the catalytic converter is not recommended, as overheating can lead to reduced lifetime of the converter. Instead, try our Corvette Catalytic Converter Shield or create your own shield using our Floor & Tunnel Shield II™. Note of Caution: Wrap is not designed to be moved or removed after it has been heat cycled. After the fibers have been heated, they lose their initial flexibility. This does not reduce the thermal properties of the exhaust wrap. Be aware of this before you decide to remove the wrap. For this reason, you should avoid wrapping any flex-pipes or flex-joints. Note about Titanium Exhaust Systems: DEI does NOT recommend wrapping exhausts made of titanium. The alloys used in the production of titanium exhaust systems tend to be thin and are designed to dissipate heat quickly. Wrapping any titanium exhaust pipe, regardless of brand, can hold in too much heat, and make the titanium alloy turn brittle and prone to premature cracking. If you are seeking to reduce the heat on a titanium exhaust system, DEI recommends using alternatives such as our flexible heat shields. Direct Heat Resistance: 1800°F Radiant Heat Resistance: 2500°F..
36.00€
Ex Tax:30.00€
Thermal Tape Reflect-A-GOLD - Heat Reflective Tape 1.5in x 4,6m DEI 010394 USA-DEI-10394 Reflect-A-GOLD™ solves the problem of heat soak into air boxes, seats, firewalls, transmission tunnels and intakes. Reflect-A-GOLD is a metalized polyimide laminated glass cloth with a high temperature pressure sensitive adhesive for use in extreme temperature swing environments. It is lightweight and easy to apply and won't lift off. Highly effective material for firewalls, fuel cells, engine covers, under hoods, engine compartment, bulk heads, seat bottoms & anything or area that needs protection from heat. For firewalls, bulkheads, engine covers, floors, seat bottoms & more Handles continuous temps up to 800°F Resists UV degradation for long-term performance Adhesive protected by release liner rated up to 325°F 0.0065" thick Easy to apply, won't lift off..
38.05€
Ex Tax:31.71€
Thermal Tape Reflect-A-GOLD - Heat Reflective Tape 1.5in x 9,1m DEI 010395 USA-DEI-10395 Reflect-A-GOLD™ solves the problem of heat soak into air boxes, seats, firewalls, transmission tunnels and intakes. Reflect-A-GOLD is a metalized polyimide laminated glass cloth with a high temperature pressure sensitive adhesive for use in extreme temperature swing environments. It is lightweight and easy to apply and won't lift off. Highly effective material for firewalls, fuel cells, engine covers, under hoods, engine compartment, bulk heads, seat bottoms & anything or area that needs protection from heat. For firewalls, bulkheads, engine covers, floors, seat bottoms & more Handles continuous temps up to 800°F Resists UV degradation for long-term performance Adhesive protected by release liner rated up to 325°F 0.0065" thick Easy to apply, won't lift off..
67.32€
Ex Tax:56.10€
Thermal Tape Reflect-A-GOLD - Heat Reflective Tape 2in x 4,6m DEI 010396 USA-DEI-10396 Reflect-A-GOLD™ solves the problem of heat soak into air boxes, seats, firewalls, transmission tunnels and intakes. Reflect-A-GOLD is a metalized polyimide laminated glass cloth with a high temperature pressure sensitive adhesive for use in extreme temperature swing environments. It is lightweight and easy to apply and won't lift off. Highly effective material for firewalls, fuel cells, engine covers, under hoods, engine compartment, bulk heads, seat bottoms & anything or area that needs protection from heat. For firewalls, bulkheads, engine covers, floors, seat bottoms & more Handles continuous temps up to 800°F Resists UV degradation for long-term performance Adhesive protected by release liner rated up to 325°F 0.0065" thick Easy to apply, won't lift off..
47.80€
Ex Tax:39.84€
Thermal Tape Reflect-A-GOLD - Heat Reflective Tape 2in x 9,1m DEI 010397 USA-DEI-10397 Reflect-A-GOLD™ solves the problem of heat soak into air boxes, seats, firewalls, transmission tunnels and intakes. Reflect-A-GOLD is a metalized polyimide laminated glass cloth with a high temperature pressure sensitive adhesive for use in extreme temperature swing environments. It is lightweight and easy to apply and won't lift off. Highly effective material for firewalls, fuel cells, engine covers, under hoods, engine compartment, bulk heads, seat bottoms & anything or area that needs protection from heat. For firewalls, bulkheads, engine covers, floors, seat bottoms & more Handles continuous temps up to 800°F Resists UV degradation for long-term performance Adhesive protected by release liner rated up to 325°F 0.0065" thick Easy to apply, won't lift off..
116.10€
Ex Tax:96.75€
Titanium Pipe Shield 10cm x 20cm (4" x 8") DEI 010453 USA-DEI-10453 Pipe Shields solve the problem of needing spot heat protection for exhaust pipes and components. Extreme heat can rob power and potentially damage engines, transmissions, hoses, and sensitive electrical components. DEI, a market leader in thermal protection, has introduced a revolutionary advancement in pipe shield technology that greatly outperforms Mylar-backed glass fiber shields. DEI's Titanium Pipe Shield combines the high heat tolerance of DEIs proprietary LR fiber technology with a unique rivet-based clamp shield design to improve heat dissipation and cooling. Glass fiber shields can begin to fail at 900°F with the Mylar outer material cracking and flaking off. DEI's Titanium Pipe Shield provides heat protection up to 1350°F. LR fiber technology is a two-ply material. The outer layer is made from pulverized and stranded lava rock into a proprietary tightly woven weave for durability and strength. The inside material is made of a special high temperature resistant fabric (89% silica) designed to withstand 350 degrees more heat than glass fiber. This proprietary fiber technology combined with DEI's unique shield standoff bracket design provides an air gap between the shield and pipe that together provides the maximum potential for cooling and heat dissipation. With the strategic placement of DEI's Titanium Pipe Shield near transmissions, brake lines, floorboards, body panels, diesel exhaust stacks or motorcycle pipes, radiant heat can be controlled for maximum protection and performance. Other uses include isolated areas such as sections of the exhaust pipe after the collector, an area that can heat transmission fluid, or along the path of an exhaust system in proximity of gas tanks, differentials and rear facias. The shield is designed for multiple automotive applications as well as marine, powersports, diesel and industrial applications where heat dissipation and thermal control is needed. Heat protection up to 1350°F LR fiber technology is a two-ply material Outer layer - pulverized and stranded lava rock woven for durability & strength Inside material - high temp resistant fabric (89% silica) designed to withstand 350°F more heat than glass fiber Includes 3.5" clamps for pipe diameters up to 3" Direct Heat Resistance: 1350°F..
43.90€
Ex Tax:36.59€
Titanium Pipe Shield 10cm x 30cm (4" x 12") DEI 010454 USA-DEI-10454 Pipe Shields solve the problem of needing spot heat protection for exhaust pipes and components. Extreme heat can rob power and potentially damage engines, transmissions, hoses, and sensitive electrical components. DEI, a market leader in thermal protection, has introduced a revolutionary advancement in pipe shield technology that greatly outperforms Mylar-backed glass fiber shields. DEI's Titanium Pipe Shield combines the high heat tolerance of DEIs proprietary LR fiber technology with a unique rivet-based clamp shield design to improve heat dissipation and cooling. Glass fiber shields can begin to fail at 900°F with the Mylar outer material cracking and flaking off. DEI's Titanium Pipe Shield provides heat protection up to 1350°F. LR fiber technology is a two-ply material. The outer layer is made from pulverized and stranded lava rock into a proprietary tightly woven weave for durability and strength. The inside material is made of a special high temperature resistant fabric (89% silica) designed to withstand 350 degrees more heat than glass fiber. This proprietary fiber technology combined with DEI's unique shield standoff bracket design provides an air gap between the shield and pipe that together provides the maximum potential for cooling and heat dissipation. With the strategic placement of DEI's Titanium Pipe Shield near transmissions, brake lines, floorboards, body panels, diesel exhaust stacks or motorcycle pipes, radiant heat can be controlled for maximum protection and performance. Other uses include isolated areas such as sections of the exhaust pipe after the collector, an area that can heat transmission fluid, or along the path of an exhaust system in proximity of gas tanks, differentials and rear facias. The shield is designed for multiple automotive applications as well as marine, powersports, diesel and industrial applications where heat dissipation and thermal control is needed. Heat protection up to 1350°F LR fiber technology is a two-ply material Outer layer - pulverized and stranded lava rock woven for durability & strength Inside material - high temp resistant fabric (89% silica) designed to withstand 350°F more heat than glass fiber Includes 3.5" clamps for pipe diameters up to 3" Direct Heat Resistance: 1350°F..
43.90€
Ex Tax:36.59€
Titanium Pipe Shield 15cm x 30cm (6" x 12") DEI 010450 USA-DEI-10450 Pipe Shields solve the problem of needing spot heat protection for exhaust pipes and components. Extreme heat can rob power and potentially damage engines, transmissions, hoses, and sensitive electrical components. DEI, a market leader in thermal protection, has introduced a revolutionary advancement in pipe shield technology that greatly outperforms Mylar-backed glass fiber shields. DEI's Titanium Pipe Shield combines the high heat tolerance of DEIs proprietary LR fiber technology with a unique rivet-based clamp shield design to improve heat dissipation and cooling. Glass fiber shields can begin to fail at 900°F with the Mylar outer material cracking and flaking off. DEI's Titanium Pipe Shield provides heat protection up to 1350°F. LR fiber technology is a two-ply material. The outer layer is made from pulverized and stranded lava rock into a proprietary tightly woven weave for durability and strength. The inside material is made of a special high temperature resistant fabric (89% silica) designed to withstand 350 degrees more heat than glass fiber. This proprietary fiber technology combined with DEI's unique shield standoff bracket design provides an air gap between the shield and pipe that together provides the maximum potential for cooling and heat dissipation. With the strategic placement of DEI's Titanium Pipe Shield near transmissions, brake lines, floorboards, body panels, diesel exhaust stacks or motorcycle pipes, radiant heat can be controlled for maximum protection and performance. Other uses include isolated areas such as sections of the exhaust pipe after the collector, an area that can heat transmission fluid, or along the path of an exhaust system in proximity of gas tanks, differentials and rear facias. The shield is designed for multiple automotive applications as well as marine, powersports, diesel and industrial applications where heat dissipation and thermal control is needed. Heat protection up to 1350°F LR fiber technology is a two-ply material Outer layer - pulverized and stranded lava rock woven for durability & strength Inside material - high temp resistant fabric (89% silica) designed to withstand 350°F more heat than glass fiber Includes 3.5" clamps for pipe diameters up to 3" Direct Heat Resistance: 1350°F..
57.56€
Ex Tax:47.97€
Titanium Pipe Shield 15cm x 60cm (6" x 24") DEI 010451 USA-DEI-10451 Pipe Shields solve the problem of needing spot heat protection for exhaust pipes and components. Extreme heat can rob power and potentially damage engines, transmissions, hoses, and sensitive electrical components. DEI, a market leader in thermal protection, has introduced a revolutionary advancement in pipe shield technology that greatly outperforms Mylar-backed glass fiber shields. DEI's Titanium Pipe Shield combines the high heat tolerance of DEIs proprietary LR fiber technology with a unique rivet-based clamp shield design to improve heat dissipation and cooling. Glass fiber shields can begin to fail at 900°F with the Mylar outer material cracking and flaking off. DEI's Titanium Pipe Shield provides heat protection up to 1350°F. LR fiber technology is a two-ply material. The outer layer is made from pulverized and stranded lava rock into a proprietary tightly woven weave for durability and strength. The inside material is made of a special high temperature resistant fabric (89% silica) designed to withstand 350 degrees more heat than glass fiber. This proprietary fiber technology combined with DEI's unique shield standoff bracket design provides an air gap between the shield and pipe that together provides the maximum potential for cooling and heat dissipation. With the strategic placement of DEI's Titanium Pipe Shield near transmissions, brake lines, floorboards, body panels, diesel exhaust stacks or motorcycle pipes, radiant heat can be controlled for maximum protection and performance. Other uses include isolated areas such as sections of the exhaust pipe after the collector, an area that can heat transmission fluid, or along the path of an exhaust system in proximity of gas tanks, differentials and rear facias. The shield is designed for multiple automotive applications as well as marine, powersports, diesel and industrial applications where heat dissipation and thermal control is needed. Heat protection up to 1350°F LR fiber technology is a two-ply material Outer layer - pulverized and stranded lava rock woven for durability & strength Inside material - high temp resistant fabric (89% silica) designed to withstand 350°F more heat than glass fiber Includes 3.5" clamps for pipe diameters up to 3" Direct Heat Resistance: 1350°F..
78.05€
Ex Tax:65.04€
Titanium Pipe Shield 15cm x 90cm (6" x 36") DEI 010452 USA-DEI-10452 Pipe Shields solve the problem of needing spot heat protection for exhaust pipes and components. Extreme heat can rob power and potentially damage engines, transmissions, hoses, and sensitive electrical components. DEI, a market leader in thermal protection, has introduced a revolutionary advancement in pipe shield technology that greatly outperforms Mylar-backed glass fiber shields. DEI's Titanium Pipe Shield combines the high heat tolerance of DEIs proprietary LR fiber technology with a unique rivet-based clamp shield design to improve heat dissipation and cooling. Glass fiber shields can begin to fail at 900°F with the Mylar outer material cracking and flaking off. DEI's Titanium Pipe Shield provides heat protection up to 1350°F. LR fiber technology is a two-ply material. The outer layer is made from pulverized and stranded lava rock into a proprietary tightly woven weave for durability and strength. The inside material is made of a special high temperature resistant fabric (89% silica) designed to withstand 350 degrees more heat than glass fiber. This proprietary fiber technology combined with DEI's unique shield standoff bracket design provides an air gap between the shield and pipe that together provides the maximum potential for cooling and heat dissipation. With the strategic placement of DEI's Titanium Pipe Shield near transmissions, brake lines, floorboards, body panels, diesel exhaust stacks or motorcycle pipes, radiant heat can be controlled for maximum protection and performance. Other uses include isolated areas such as sections of the exhaust pipe after the collector, an area that can heat transmission fluid, or along the path of an exhaust system in proximity of gas tanks, differentials and rear facias. The shield is designed for multiple automotive applications as well as marine, powersports, diesel and industrial applications where heat dissipation and thermal control is needed. Heat protection up to 1350°F LR fiber technology is a two-ply material Outer layer - pulverized and stranded lava rock woven for durability & strength Inside material - high temp resistant fabric (89% silica) designed to withstand 350°F more heat than glass fiber Includes 3.5" clamps for pipe diameters up to 3" Direct Heat Resistance: 1350°F..
102.44€
Ex Tax:85.37€
Titanium Protect-A-Sleeve solves the problem of burning, cracking plug wires, lines & hoses from engine & exhaust heat. DEI's Titanium Protect-A-Sleeve with LR Technology™ offers the best possible line sleeve protection on the market. Developed specifically for any application where extreme high heat is present, these Titanium sleeves will protect wires, lines and cables when exposed up to 1800°F direct heat/2500°F radiant. Developed with DEI's proprietary LR Technology, these high temperature rated sleeves provide superior thermal protection for street vehicles or race engines, protecting fuel, oil lines, spark plug and electrical wires from direct or under hood radiant heat. Water and heat resistant, they are also ideal for Powersports ATV/UTV, motorcycle, personal watercraft, snowmobiles, and marine use. The 1/2" ID sleeves will fit many of today's larger diameter spark plug wires for protection against hot exhaust manifolds and headers. Titanium Protect-A-Sleeve is also offered in 1" and 2" diameters. 0.5in ID x 4ft includes ten (10) 18mm x 1.5" Black Spark Plug Wire / Boot Shrink Tubes 1in ID x 4t includes two (2) 50mm x 3" Black Spark Plug Wire / Boot Shrink Tubes 2in ID x 3ft includes two (2) 75mm x 3" Black Spark Plug Wire / Boot Shrink Tubes Bulk sizes DO NOT INCLUDE Black Spark Plug Wire / Boot Shrink Tubes Protects plug wires from hot exhaust manifolds & headers Sizes large enough for radiator hoses, heater hoses & other large hoses Radiant Heat Resistance: 2500°F Direct Heat Resistance: 1800°F Color: Titanium..
32.20€
Ex Tax:26.83€
Titanium Protect-A-Sleeve solves the problem of burning, cracking plug wires, lines & hoses from engine & exhaust heat. DEI's Titanium Protect-A-Sleeve with LR Technology™ offers the best possible line sleeve protection on the market. Developed specifically for any application where extreme high heat is present, these Titanium sleeves will protect wires, lines and cables when exposed up to 1800°F direct heat/2500°F radiant. Developed with DEI's proprietary LR Technology, these high temperature rated sleeves provide superior thermal protection for street vehicles or race engines, protecting fuel, oil lines, spark plug and electrical wires from direct or under hood radiant heat. Water and heat resistant, they are also ideal for Powersports ATV/UTV, motorcycle, personal watercraft, snowmobiles, and marine use. The 1/2" ID sleeves will fit many of today's larger diameter spark plug wires for protection against hot exhaust manifolds and headers. Titanium Protect-A-Sleeve is also offered in 1" and 2" diameters. 0.5in ID x 4ft includes ten (10) 18mm x 1.5" Black Spark Plug Wire / Boot Shrink Tubes 1in ID x 4t includes two (2) 50mm x 3" Black Spark Plug Wire / Boot Shrink Tubes 2in ID x 3ft includes two (2) 75mm x 3" Black Spark Plug Wire / Boot Shrink Tubes Bulk sizes DO NOT INCLUDE Black Spark Plug Wire / Boot Shrink Tubes Protects plug wires from hot exhaust manifolds & headers Sizes large enough for radiator hoses, heater hoses & other large hoses Radiant Heat Resistance: 2500°F Direct Heat Resistance: 1800°F Color: Titanium..
73.17€
Ex Tax:60.98€
Titanium Protect-A-Sleeve solves the problem of burning, cracking plug wires, lines & hoses from engine & exhaust heat. DEI's Titanium Protect-A-Sleeve with LR Technology™ offers the best possible line sleeve protection on the market. Developed specifically for any application where extreme high heat is present, these Titanium sleeves will protect wires, lines and cables when exposed up to 1800°F direct heat/2500°F radiant. Developed with DEI's proprietary LR Technology, these high temperature rated sleeves provide superior thermal protection for street vehicles or race engines, protecting fuel, oil lines, spark plug and electrical wires from direct or under hood radiant heat. Water and heat resistant, they are also ideal for Powersports ATV/UTV, motorcycle, personal watercraft, snowmobiles, and marine use. The 1/2" ID sleeves will fit many of today's larger diameter spark plug wires for protection against hot exhaust manifolds and headers. Titanium Protect-A-Sleeve is also offered in 1" and 2" diameters. 0.5in ID x 4ft includes ten (10) 18mm x 1.5" Black Spark Plug Wire / Boot Shrink Tubes 1in ID x 4t includes two (2) 50mm x 3" Black Spark Plug Wire / Boot Shrink Tubes 2in ID x 3ft includes two (2) 75mm x 3" Black Spark Plug Wire / Boot Shrink Tubes Bulk sizes DO NOT INCLUDE Black Spark Plug Wire / Boot Shrink Tubes Protects plug wires from hot exhaust manifolds & headers Sizes large enough for radiator hoses, heater hoses & other large hoses Radiant Heat Resistance: 2500°F Direct Heat Resistance: 1800°F Color: Titanium..
47.80€
Ex Tax:39.84€
Flex turbo blanket allows to significantly reduce the temperature under the hood, improving the performance of the exhaust. Working temperatures are up to 800 degrees, temporarily up to 1000 degrees. Our blankets are thick, well made with several layers of high-quality heat-resistant materials, which guarantees trouble-free exploitation. Blanket is of an average size of T3 (e.g. Garrett GT28RS, IHI VF34). Size of the blanket: 450x170mm..
58.29€
Ex Tax:48.58€
Flex turbo blanket allows to significantly reduce the temperature under the hood, improving the performance of the exhaust. Working temperatures are up to 800 degrees, temporarily up to 1000 degrees. Our blankets are thick, well made with several layers of high-quality heat-resistant materials, which guarantees trouble-free exploitation. Size of the blanket: 460x190mm..
70.49€
Ex Tax:58.74€
MAGMA STRONG turbo blanket with reinforcement designed for highest resistance to extremely high temperatures (up to 1650˚C). It helps to significantly reduce the temperature under the hood, which has a positive effect on engine and cooling system components. Also blanket improving exhaust outlet speed. Blanket is thick, solidly made of several layers of high quality heat-resistant materials. Additional advantage is reinforcement of the inner part to facilitate the possible removal of the cast iron blanket. The product is intended for smaller turbochargers (e.g. GT20, GT22, GT25, GT28). The blanket after heating is not suitable for disassembly and reinstallation !!..
55.85€
Ex Tax:46.54€
MAGMA STRONG turbo blanket with reinforcement designed for highest resistance to extremely high temperatures (up to 1650˚C). It helps to significantly reduce the temperature under the hood, which has a positive effect on engine and cooling system components. Also blanket improving exhaust outlet speed. Blanket is thick, solidly made of several layers of high quality heat-resistant materials. Additional advantage is reinforcement of the inner part to facilitate the possible removal of the cast iron blanket. The product is intended for medium turbochargers (e.g. Garrett GT28, GT30, GT35, IHI VF34). The blanket after heating is not suitable for disassembly and reinstallation !!..
60.73€
Ex Tax:50.61€
MAGMA STRONG turbo blanket with reinforcement designed for highest resistance to extremely high temperatures (up to 1650˚C). It helps to significantly reduce the temperature under the hood, which has a positive effect on engine and cooling system components. Also blanket improving exhaust outlet speed. Blanket is thick, solidly made of several layers of high quality heat-resistant materials. Additional advantage is reinforcement of the inner part to facilitate the possible removal of the cast iron blanket. The product is intended for big turbochargers (e.g. Garrett GT40, GT42, GT45, Holset HX40). The blanket after heating is not suitable for disassembly and reinstallation !!..
65.61€
Ex Tax:54.67€
Blanket for MAGMA type turbo with the highest resistance to extreme temperatures (up to 1650˚C). It helps to greatly reduce temperature under the hood, which has a beneficial effect on the engine and the cooling system components, further improving the exhaust rate. Our blankets are thick, solidly made of several layers of high-quality heat-resistant materials, which guarantees trouble-free use. Blankets with an average size of T25 (e.g. GT20, GT22, GT25, GT28)...
50.98€
Ex Tax:42.48€
Blanket for MAGMA type turbo with the highest resistance to extreme temperatures (up to 1650˚C). It helps to greatly reduce temperature under the hood, which has a beneficial effect on the engine and the cooling system components, further improving the exhaust rate. Our blankets are thick, solidly made of several layers of high-quality heat-resistant materials, which guarantees trouble-free use. Blankets with an average size of T3 (e.g. Garrett GT28, GT30, GT35, IHI VF34, etc.)...
55.85€
Ex Tax:46.54€
Blanket for MAGMA type turbo with the highest resistance to extreme temperatures (up to 1650˚C). It helps to greatly reduce temperature under the hood, which has a beneficial effect on the engine and the cooling system components, further improving the exhaust rate. Our blankets are thick, solidly made of several layers of high-quality heat-resistant materials, which guarantees trouble-free use. Blankets with an average size of T4 (e.g. Garrett GT40, GT42, GT45, Holset HX40 itd.)...
60.73€
Ex Tax:50.61€
BLACK STRONG turbo blanket with reinforcement designed for highest resistance to extremely high temperatures (up to 1650˚C). It helps to significantly reduce the temperature under the hood, which has a positive effect on engine and cooling system components. Also blanket improving exhaust outlet speed. Blanket is thick, solidly made of several layers of high quality heat-resistant materials. Additional advantage is reinforcement of the inner part to facilitate the possible removal of the cast iron blanket. The product is intended for smaller turbochargers (e.g. GT20, GT22, GT25, GT28). The blanket after heating is not suitable for disassembly and reinstallation !!..
48.54€
Ex Tax:40.45€
Turbo blanket allows to significantly reduce the temperature under the hood, improving the performance of the exhaust. Our blankets are thick, well made with several layers of high-quality heat-resistant materials, which guarantees trouble-free exploitation. Blanket is of an average size of T25 (e.g. GT20, GT22, GT25, GT28) is available in silver and black.koc - black..
46.10€
Ex Tax:38.41€
Turbo blanket allows to significantly reduce the temperature under the hood, improving the performance of the exhaust. Our blankets are thick, well made with several layers of high-quality heat-resistant materials, which guarantees trouble-free exploitation. Blanket is of an average size of T25 (e.g. GT20, GT22, GT25, GT28) is available in silver and black.koc - silver..
46.10€
Ex Tax:38.41€
Turbo blanket allows to significantly reduce the temperature under the hood, improving the performance of the exhaust. Our blankets are thick, well made with several layers of high-quality heat-resistant materials, which guarantees trouble-free exploitation. Blanket is of an average size of T3 (e.g. Garrett GT28RS, IHI VF34) is available in silver and black. Pictures show a blanket T3 compared to T4.koc - black..
58.29€
Ex Tax:48.58€
Turbo blanket allows to significantly reduce the temperature under the hood, improving the performance of the exhaust. Our blankets are thick, well made with several layers of high-quality heat-resistant materials, which guarantees trouble-free exploitation. Blanket is of an average size of T3 (e.g. Garrett GT28RS, IHI VF34) is available in silver and black. Pictures show a blanket T3 compared to T4.koc - silver..
58.29€
Ex Tax:48.58€
Turbo blanket allows to significantly reduce the temperature under the hood, improving the performance of the exhaust. Our blankets are thick, well made with several layers of high-quality heat-resistant materials, which guarantees trouble-free exploitation. Blanket is of an average size of T4 (e.g. Garrett GT40, Holset HX4) is available in silver and black. Pictures show a blanket T3 compared to T4.koc - black..
70.49€
Ex Tax:58.74€
Turbo blanket allows to significantly reduce the temperature under the hood, improving the performance of the exhaust. Our blankets are thick, well made with several layers of high-quality heat-resistant materials, which guarantees trouble-free exploitation. Blanket is of an average size of T4 (e.g. Garrett GT40, Holset HX4) is available in silver and black. Pictures show a blanket T3 compared to T4.koc - silver..
70.49€
Ex Tax:58.74€
FMIC.Pro Carbon fiber Koc na turbo FMIC.Pro to profesjonalny produkt z zupełnie nowej, innowacyjnej serii termoizolacji. Pierwsza, wewnętrzna warstwa wykonana jest z materiału, który dzięki wysokiej zawartości ditlenku krzemu, bez problemu poradzi z rozgrzaną do czerwoności muszlą wydechową turbosprężarki. Wypełnienie koca stanowi gruba warstwa wełny ceramicznej, która skutecznie zatrzymuje temperaturę, a całość obszyta jest materiałem z włókna węglowego (carbon fiber). Dzięki takiemu połączeniu, mimo stałego kontaktu z temperaturami przekraczającymi 1000’C, koc FMIC.Pro stanowi znakomitą barierę termiczną, nie odbarwia się, a po demontażu pozostaje elastyczny i nadaje się do ponownego założenia. Termoizolacja z serii FMIC.Pro może być stosowana w ekstremalnych warunkach, dzięki czemu jest wykorzystywana w profesjonalnych samochodach wyścigowych. Znakomicie obniża temperaturę pod maską, co korzystnie wpływa na pracę silnika i elementy układu chłodzenia, dodatkowo zwiększając energię wylotową spalin. Odporność temperaturowa: 1100’C Rozmiar muszli turbo: T25 Warstwa wewnętrzna: Materiał o dużej zawartości ditlenku krzemionki Warstwa wypełniająca: Wełna ceramiczna Warstwa zewnętrzna: Włókno węglowe (carbon fiber) Materiał obszycia krawędzi: Magma..
92.44€
Ex Tax:77.03€
FMIC.Pro Carbon fiber Koc na turbo FMIC.Pro to profesjonalny produkt z zupełnie nowej, innowacyjnej serii termoizolacji. Pierwsza, wewnętrzna warstwa wykonana jest z materiału, który dzięki wysokiej zawartości ditlenku krzemu, bez problemu poradzi z rozgrzaną do czerwoności muszlą wydechową turbosprężarki. Wypełnienie koca stanowi gruba warstwa wełny ceramicznej, która skutecznie zatrzymuje temperaturę, a całość obszyta jest materiałem z włókna węglowego (carbon fiber). Dzięki takiemu połączeniu, mimo stałego kontaktu z temperaturami przekraczającymi 1000’C, koc FMIC.Pro stanowi znakomitą barierę termiczną, nie odbarwia się, a po demontażu pozostaje elastyczny i nadaje się do ponownego założenia. Termoizolacja z serii FMIC.Pro może być stosowana w ekstremalnych warunkach, dzięki czemu jest wykorzystywana w profesjonalnych samochodach wyścigowych. Znakomicie obniża temperaturę pod maską, co korzystnie wpływa na pracę silnika i elementy układu chłodzenia, dodatkowo zwiększając energię wylotową spalin. Odporność temperaturowa: 1100’C Rozmiar muszli turbo: T3 Warstwa wewnętrzna: Materiał o dużej zawartości ditlenku krzemionki Warstwa wypełniająca: Wełna ceramiczna Warstwa zewnętrzna: Włókno węglowe (carbon fiber) Materiał obszycia krawędzi: Magma..
94.88€
Ex Tax:79.07€
FMIC.Pro Carbon fiber Koc na turbo FMIC.Pro to profesjonalny produkt z zupełnie nowej, innowacyjnej serii termoizolacji. Pierwsza, wewnętrzna warstwa wykonana jest z materiału, który dzięki wysokiej zawartości ditlenku krzemu, bez problemu poradzi z rozgrzaną do czerwoności muszlą wydechową turbosprężarki. Wypełnienie koca stanowi gruba warstwa wełny ceramicznej, która skutecznie zatrzymuje temperaturę, a całość obszyta jest materiałem z włókna węglowego (carbon fiber). Dzięki takiemu połączeniu, mimo stałego kontaktu z temperaturami przekraczającymi 1000’C, koc FMIC.Pro stanowi znakomitą barierę termiczną, nie odbarwia się, a po demontażu pozostaje elastyczny i nadaje się do ponownego założenia. Termoizolacja z serii FMIC.Pro może być stosowana w ekstremalnych warunkach, dzięki czemu jest wykorzystywana w profesjonalnych samochodach wyścigowych. Znakomicie obniża temperaturę pod maską, co korzystnie wpływa na pracę silnika i elementy układu chłodzenia, dodatkowo zwiększając energię wylotową spalin. Odporność temperaturowa: 1100’C Rozmiar muszli turbo: T4 Warstwa wewnętrzna: Materiał o dużej zawartości ditlenku krzemionki Warstwa wypełniająca: Wełna ceramiczna Warstwa zewnętrzna: Włókno węglowe (carbon fiber) Materiał obszycia krawędzi: Magma..
97.32€
Ex Tax:81.10€
FMIC.Pro Inconel Carbon fiber FMIC.Pro turbo blanket is a professional product from a completely new, innovative series of thermal insulation.The first, inner layer is made of inconelu which, thanks to the high resistance to oxidation and corrosion is used in the aviation industry and its melting point is as high as 1300'C. The blanket is filled with a thick layer of ceramic wool, which effectively stops the temperature, and the whole blanket is covered with carbon fiber material. The inconel layer forced the use a stainless steel mesh to cover the blanket, and this additionally increases its durability. Thanks to such a combination, despite constant contact with temperatures exceeding 1000'C, FMIC.Pro blanket is an excellent thermal barrier, does not discolour, and after dismantling it remains flexible and suitable for reapplication. The FMIC.Pro blanket can be used in extreme conditions, making it suitable for professional racing cars. It reduces the temperature under the hood perfectly, which has a positive effect on the engine and cooling system components, further increasing the exhaust energy. Temperature resistance: 1250'C Turbo shell size: T25 Interior layer: Inconel Filling layer: Ceramic wool External layer: Carbon fibres Edge trimming material: Stainless steel..
116.83€
Ex Tax:97.36€
FMIC.Pro Inconel Carbon fiber FMIC.Pro turbo blanket is a professional product from a completely new, innovative series of thermal insulation.The first, inner layer is made of inconelu which, thanks to the high resistance to oxidation and corrosion is used in the aviation industry and its melting point is as high as 1300'C. The blanket is filled with a thick layer of ceramic wool, which effectively stops the temperature, and the whole blanket is covered with carbon fiber material. The inconel layer forced the use a stainless steel mesh to cover the blanket, and this additionally increases its durability. Thanks to such a combination, despite constant contact with temperatures exceeding 1000'C, FMIC.Pro blanket is an excellent thermal barrier, does not discolour, and after dismantling it remains flexible and suitable for reapplication. The FMIC.Pro blanket can be used in extreme conditions, making it suitable for professional racing cars. It reduces the temperature under the hood perfectly, which has a positive effect on the engine and cooling system components, further increasing the exhaust energy. Temperature resistance: 1250'C Turbo shell size: T3 Interior layer: Inconel Filling layer: Ceramic wool External layer: Carbon fibres Edge trimming material: Stainless steel..
119.27€
Ex Tax:99.39€
FMIC.Pro Inconel Carbon fiber FMIC.Pro turbo blanket is a professional product from a completely new, innovative series of thermal insulation.The first, inner layer is made of inconelu which, thanks to the high resistance to oxidation and corrosion is used in the aviation industry and its melting point is as high as 1300'C. The blanket is filled with a thick layer of ceramic wool, which effectively stops the temperature, and the whole blanket is covered with carbon fiber material. The inconel layer forced the use a stainless steel mesh to cover the blanket, and this additionally increases its durability. Thanks to such a combination, despite constant contact with temperatures exceeding 1000'C, FMIC.Pro blanket is an excellent thermal barrier, does not discolour, and after dismantling it remains flexible and suitable for reapplication. The FMIC.Pro blanket can be used in extreme conditions, making it suitable for professional racing cars. It reduces the temperature under the hood perfectly, which has a positive effect on the engine and cooling system components, further increasing the exhaust energy. Temperature resistance: 1250'C Turbo shell size: T4 Interior layer: Inconel Filling layer: Ceramic wool External layer: Carbon fibres Edge trimming material: Stainless steel..
121.70€
Ex Tax:101.42€
FMIC.Pro Inconel Magma Carbon Fiber FMIC.Pro turbo blanket is a professional product from a completely new, innovative series of thermal insulation.The first, inner layer is made of inconelu which, thanks to the high resistance to oxidation and corrosion is used in the aviation industry and its melting point is as high as 1300'C. The blanket is filled with a thick layer of ceramic wool, which effectively stops the temperature, and the whole blanket is covered with magma style material, used in thermal insulation bandages, additionally interlaced with carbon fibres. The inconel layer forced the use a stainless steel mesh to cover the blanket, and this additionally increases its durability. Thanks to such a combination, despite constant contact with temperatures exceeding 1000'C, FMIC.Pro blanket is an excellent thermal barrier, does not discolour, and after dismantling it remains flexible and suitable for reapplication. The FMIC.Pro blanket can be used in extreme conditions, making it suitable for professional racing cars. It reduces the temperature under the hood perfectly, which has a positive effect on the engine and cooling system components, further increasing the exhaust energy. Temperature resistance: 1250'C Turbo shell size: T25 Interior layer: Inconel Filling layer: Ceramic wool External layer: Magma interlaced with carbon fibres Edge trimming material: Stainless steel..
104.64€
Ex Tax:87.20€
FMIC.Pro Inconel Magma Carbon Fiber FMIC.Pro turbo blanket is a professional product from a completely new, innovative series of thermal insulation.The first, inner layer is made of inconelu which, thanks to the high resistance to oxidation and corrosion is used in the aviation industry and its melting point is as high as 1300'C. The blanket is filled with a thick layer of ceramic wool, which effectively stops the temperature, and the whole blanket is covered with magma style material, used in thermal insulation bandages, additionally interlaced with carbon fibres. The inconel layer forced the use a stainless steel mesh to cover the blanket, and this additionally increases its durability. Thanks to such a combination, despite constant contact with temperatures exceeding 1000'C, FMIC.Pro blanket is an excellent thermal barrier, does not discolour, and after dismantling it remains flexible and suitable for reapplication. The FMIC.Pro blanket can be used in extreme conditions, making it suitable for professional racing cars. It reduces the temperature under the hood perfectly, which has a positive effect on the engine and cooling system components, further increasing the exhaust energy. Temperature resistance: 1250'C Turbo shell size: T3 Interior layer: Inconel Filling layer: Ceramic wool External layer: Magma interlaced with carbon fibres Edge trimming material: Stainless steel..
107.08€
Ex Tax:89.23€
FMIC.Pro Inconel Magma Carbon Fiber FMIC.Pro turbo blanket is a professional product from a completely new, innovative series of thermal insulation.The first, inner layer is made of inconelu which, thanks to the high resistance to oxidation and corrosion is used in the aviation industry and its melting point is as high as 1300'C. The blanket is filled with a thick layer of ceramic wool, which effectively stops the temperature, and the whole blanket is covered with magma style material, used in thermal insulation bandages, additionally interlaced with carbon fibres. The inconel layer forced the use a stainless steel mesh to cover the blanket, and this additionally increases its durability. Thanks to such a combination, despite constant contact with temperatures exceeding 1000'C, FMIC.Pro blanket is an excellent thermal barrier, does not discolour, and after dismantling it remains flexible and suitable for reapplication. The FMIC.Pro blanket can be used in extreme conditions, making it suitable for professional racing cars. It reduces the temperature under the hood perfectly, which has a positive effect on the engine and cooling system components, further increasing the exhaust energy. Temperature resistance: 1250'C Turbo shell size: T4 Interior layer: Inconel Filling layer: Ceramic wool External layer: Magma interlaced with carbon fibres Edge trimming material: Stainless steel..
109.51€
Ex Tax:91.26€
FMIC.Pro Inconel Magma Koc na turbo FMIC.Pro to profesjonalny produkt z zupełnie nowej, innowacyjnej serii termoizolacji. Pierwsza, wewnętrzna warstwa wykonana jest z inconelu, który dzięki odporności na utlenianie i korozję znajduje zastosowanie w przemyśle lotniczym, a jego temperatura topnienia sięga aż 1300’C. Wypełnienie koca stanowi gruba warstwa wełny ceramicznej, która skutecznie zatrzymuje temperaturę, a całość obszyta jest materiałem typu magma, znajdującego zastosowanie w bandażach termoizolacyjnych. Użycie warstwy z inconelu wymusiło zastosowania siatki nierdzewnej do obszycia koca, co dodatkowo wpływa na jego trwałość. Dzięki takiemu połączeniu, mimo stałego kontaktu z temperaturami przekraczającymi 1000’C, koc FMIC.Pro stanowi znakomitą barierę termiczną, nie odbarwia się, a po demontażu pozostaje elastyczny i nadaje się do ponownego założenia. Termoizolacja z serii FMIC.Pro może być stosowana w ekstremalnych warunkach, dzięki czemu jest wykorzystywana w profesjonalnych samochodach wyścigowych. Znakomicie obniża temperaturę pod maską, co korzystnie wpływa na pracę silnika i elementy układu chłodzenia, dodatkowo zwiększając energię wylotową spalin. Odporność temperaturowa: 1250’C Rozmiar muszli turbo: T25 Warstwa wewnętrzna: Inconel Warstwa wypełniająca: Wełna ceramiczna Warstwa zewnętrzna: Magma Materiał obszycia krawędzi: Stal nierdzewna..
92.44€
Ex Tax:77.03€
FMIC.Pro Inconel Magma Koc na turbo FMIC.Pro to profesjonalny produkt z zupełnie nowej, innowacyjnej serii termoizolacji. Pierwsza, wewnętrzna warstwa wykonana jest z inconelu, który dzięki odporności na utlenianie i korozję znajduje zastosowanie w przemyśle lotniczym, a jego temperatura topnienia sięga aż 1300’C. Wypełnienie koca stanowi gruba warstwa wełny ceramicznej, która skutecznie zatrzymuje temperaturę, a całość obszyta jest materiałem typu magma, znajdującego zastosowanie w bandażach termoizolacyjnych. Użycie warstwy z inconelu wymusiło zastosowania siatki nierdzewnej do obszycia koca, co dodatkowo wpływa na jego trwałość. Dzięki takiemu połączeniu, mimo stałego kontaktu z temperaturami przekraczającymi 1000’C, koc FMIC.Pro stanowi znakomitą barierę termiczną, nie odbarwia się, a po demontażu pozostaje elastyczny i nadaje się do ponownego założenia. Termoizolacja z serii FMIC.Pro może być stosowana w ekstremalnych warunkach, dzięki czemu jest wykorzystywana w profesjonalnych samochodach wyścigowych. Znakomicie obniża temperaturę pod maską, co korzystnie wpływa na pracę silnika i elementy układu chłodzenia, dodatkowo zwiększając energię wylotową spalin. Odporność temperaturowa: 1250’C Rozmiar muszli turbo: T3 Warstwa wewnętrzna: Inconel Warstwa wypełniająca: Wełna ceramiczna Warstwa zewnętrzna: Magma Materiał obszycia krawędzi: Stal nierdzewna..
94.88€
Ex Tax:79.07€
FMIC.Pro Inconel Magma Koc na turbo FMIC.Pro to profesjonalny produkt z zupełnie nowej, innowacyjnej serii termoizolacji. Pierwsza, wewnętrzna warstwa wykonana jest z inconelu, który dzięki odporności na utlenianie i korozję znajduje zastosowanie w przemyśle lotniczym, a jego temperatura topnienia sięga aż 1300’C. Wypełnienie koca stanowi gruba warstwa wełny ceramicznej, która skutecznie zatrzymuje temperaturę, a całość obszyta jest materiałem typu magma, znajdującego zastosowanie w bandażach termoizolacyjnych. Użycie warstwy z inconelu wymusiło zastosowania siatki nierdzewnej do obszycia koca, co dodatkowo wpływa na jego trwałość. Dzięki takiemu połączeniu, mimo stałego kontaktu z temperaturami przekraczającymi 1000’C, koc FMIC.Pro stanowi znakomitą barierę termiczną, nie odbarwia się, a po demontażu pozostaje elastyczny i nadaje się do ponownego założenia. Termoizolacja z serii FMIC.Pro może być stosowana w ekstremalnych warunkach, dzięki czemu jest wykorzystywana w profesjonalnych samochodach wyścigowych. Znakomicie obniża temperaturę pod maską, co korzystnie wpływa na pracę silnika i elementy układu chłodzenia, dodatkowo zwiększając energię wylotową spalin. Odporność temperaturowa: 1250’C Rozmiar muszli turbo: T4 Warstwa wewnętrzna: Inconel Warstwa wypełniająca: Wełna ceramiczna Warstwa zewnętrzna: Magma Materiał obszycia krawędzi: Stal nierdzewna..
97.32€
Ex Tax:81.10€
FMIC.Pro Magma Carbon Fiber FMIC.Pro turbo blanket is a professional product from a completely new, innovative series of thermal insulation.The first, inner layer is made of a material which, thanks to the high content of silicon dioxide, can easily handle the red-hot exhaust shell of the turbocharger. The blanket is filled with a thick layer of ceramic wool, which effectively stops the temperature, and the whole blanket is covered with magma style material, used in thermal insulation bandages, additionally interlaced with carbon fibres. Thanks to such a combination, despite constant contact with temperatures exceeding 1000'C, FMIC.Pro blanket is an excellent thermal barrier, does not discolour, and after dismantling it remains flexible and suitable for reapplication. The FMIC.Pro blanket can be used in extreme conditions, making it suitable for professional racing cars. It reduces the temperature under the hood perfectly, which has a positive effect on the engine and cooling system components, further increasing the exhaust energy. Temperature resistance: 1100'C Turbo shell size: T25 Interior layer: Material with high silica dioxide content Filling layer: Ceramic wool External layer: Magma interlaced with carbon fibres Edge trimming material: Magma..
80.24€
Ex Tax:66.87€
FMIC.Pro Magma Carbon Fiber FMIC.Pro turbo blanket is a professional product from a completely new, innovative series of thermal insulation.The first, inner layer is made of a material which, thanks to the high content of silicon dioxide, can easily handle the red-hot exhaust shell of the turbocharger. The blanket is filled with a thick layer of ceramic wool, which effectively stops the temperature, and the whole blanket is covered with magma style material, used in thermal insulation bandages, additionally interlaced with carbon fibres. Thanks to such a combination, despite constant contact with temperatures exceeding 1000'C, FMIC.Pro blanket is an excellent thermal barrier, does not discolour, and after dismantling it remains flexible and suitable for reapplication. The FMIC.Pro blanket can be used in extreme conditions, making it suitable for professional racing cars. It reduces the temperature under the hood perfectly, which has a positive effect on the engine and cooling system components, further increasing the exhaust energy. Temperature resistance: 1100'C Turbo shell size: T3 Interior layer: Material with high silica dioxide content Filling layer: Ceramic wool External layer: Magma interlaced with carbon fibres Edge trimming material: Magma..
82.68€
Ex Tax:68.90€
FMIC.Pro Magma Carbon Fiber FMIC.Pro turbo blanket is a professional product from a completely new, innovative series of thermal insulation.The first, inner layer is made of a material which, thanks to the high content of silicon dioxide, can easily handle the red-hot exhaust shell of the turbocharger. The blanket is filled with a thick layer of ceramic wool, which effectively stops the temperature, and the whole blanket is covered with magma style material, used in thermal insulation bandages, additionally interlaced with carbon fibres. Thanks to such a combination, despite constant contact with temperatures exceeding 1000'C, FMIC.Pro blanket is an excellent thermal barrier, does not discolour, and after dismantling it remains flexible and suitable for reapplication. The FMIC.Pro blanket can be used in extreme conditions, making it suitable for professional racing cars. It reduces the temperature under the hood perfectly, which has a positive effect on the engine and cooling system components, further increasing the exhaust energy. Temperature resistance: 1100'C Turbo shell size: T4 Interior layer: Material with high silica dioxide content Filling layer: Ceramic wool External layer: Magma interlaced with carbon fibres Edge trimming material: Magma..
85.12€
Ex Tax:70.94€
FMIC.Pro Magma FMIC.Pro turbo blanket is a professional product from a completely new, innovative series of thermal insulation.The first, inner layer is made of a material which, thanks to the high content of silicon dioxide, can easily handle the red-hot exhaust shell of the turbocharger. The blanket is filled with a thick layer of ceramic wool, which effectively stops the temperature, and the whole blanket is covered with magma style material, used in thermal insulation bandages. Thanks to such a combination, despite constant contact with temperatures exceeding 1000'C, FMIC.Pro blanket is an excellent thermal barrier, does not discolour, and after dismantling it remains flexible and suitable for reapplication. The FMIC.Pro blanket can be used in extreme conditions, making it suitable for professional racing cars. It reduces the temperature under the hood perfectly, which has a positive effect on the engine and cooling system components, further increasing the exhaust energy. Temperature resistance: 1100'C Turbo shell size: T25 Interior layer: Material with high silica dioxide content Filling layer: Ceramic wool External layer: Magma Edge trimming material: Magma..
68.05€
Ex Tax:56.71€
FMIC.Pro Magma FMIC.Pro turbo blanket is a professional product from a completely new, innovative series of thermal insulation.The first, inner layer is made of a material which, thanks to the high content of silicon dioxide, can easily handle the red-hot exhaust shell of the turbocharger. The blanket is filled with a thick layer of ceramic wool, which effectively stops the temperature, and the whole blanket is covered with magma style material, used in thermal insulation bandages. Thanks to such a combination, despite constant contact with temperatures exceeding 1000'C, FMIC.Pro blanket is an excellent thermal barrier, does not discolour, and after dismantling it remains flexible and suitable for reapplication. The FMIC.Pro blanket can be used in extreme conditions, making it suitable for professional racing cars. It reduces the temperature under the hood perfectly, which has a positive effect on the engine and cooling system components, further increasing the exhaust energy. Temperature resistance: 1100'C Turbo shell size: T3 Interior layer: Material with high silica dioxide content Filling layer: Ceramic wool External layer: Magma Edge trimming material: Magma..
70.49€
Ex Tax:58.74€
FMIC.Pro Magma FMIC.Pro turbo blanket is a professional product from a completely new, innovative series of thermal insulation.The first, inner layer is made of a material which, thanks to the high content of silicon dioxide, can easily handle the red-hot exhaust shell of the turbocharger. The blanket is filled with a thick layer of ceramic wool, which effectively stops the temperature, and the whole blanket is covered with magma style material, used in thermal insulation bandages. Thanks to such a combination, despite constant contact with temperatures exceeding 1000'C, FMIC.Pro blanket is an excellent thermal barrier, does not discolour, and after dismantling it remains flexible and suitable for reapplication. The FMIC.Pro blanket can be used in extreme conditions, making it suitable for professional racing cars. It reduces the temperature under the hood perfectly, which has a positive effect on the engine and cooling system components, further increasing the exhaust energy. Temperature resistance: 1100'C Turbo shell size: T4 Interior layer: Material with high silica dioxide content Filling layer: Ceramic wool External layer: Magma Edge trimming material: Magma..
72.93€
Ex Tax:60.77€
FMIC.Pro wastegate blanket is a professional product from a completely new, innovative series of thermal insulation.The first, inner layer is made of a material which, thanks to the high content of silicon dioxide, can easily handle heated up to 1000'C wastegate body. The blanket is filled with a thick layer of ceramic wool, which effectively stops the temperature, and the whole blanket is covered with carbon fiber material. Thanks to such a combination, despite constant contact with temperatures exceeding 1000'C, FMIC.Pro blanket is an excellent thermal barrier, does not discolour, and after dismantling it remains flexible and suitable for reapplication. The FMIC.Pro blanket can be used in extreme conditions, making it suitable for professional racing cars. It reduces the temperature under the hood perfectly, which has a positive effect on the engine and cooling system components. Temperature resistance: 1100'C Wastegate size: 35/38mm Interior layer: Material with high silica dioxide content Filling layer: Ceramic wool External layer: Carbon fibres Edge trimming material: Magma..
60.73€
Ex Tax:50.61€
FMIC.Pro wastegate blanket is a professional product from a completely new, innovative series of thermal insulation.The first, inner layer is made of a material which, thanks to the high content of silicon dioxide, can easily handle heated up to 1000'C wastegate body. The blanket is filled with a thick layer of ceramic wool, which effectively stops the temperature, and the whole blanket is covered with magma style material, used in thermal insulation bandages, additionally interlaced with carbon fibres. Thanks to such a combination, despite constant contact with temperatures exceeding 1000'C, FMIC.Pro blanket is an excellent thermal barrier, does not discolour, and after dismantling it remains flexible and suitable for reapplication. The FMIC.Pro blanket can be used in extreme conditions, making it suitable for professional racing cars. It reduces the temperature under the hood perfectly, which has a positive effect on the engine and cooling system components. Temperature resistance: 1100'C Wastegate size: 35/38mm Interior layer: Material with high silica dioxide content Filling layer: Ceramic wool External layer: Magma with carbon fibres Edge trimming material: Magma..
50.98€
Ex Tax:42.48€
FMIC.Pro wastegate blanket is a professional product from a completely new, innovative series of thermal insulation.The first, inner layer is made of a material which, thanks to the high content of silicon dioxide, can easily handle heated up to 1000'C wastegate body. The blanket is filled with a thick layer of ceramic wool, which effectively stops the temperature, and the whole blanket is covered with magma style material, used in thermal insulation bandages. Thanks to such a combination, despite constant contact with temperatures exceeding 1000'C, FMIC.Pro blanket is an excellent thermal barrier, does not discolour, and after dismantling it remains flexible and suitable for reapplication. The FMIC.Pro blanket can be used in extreme conditions, making it suitable for professional racing cars. It reduces the temperature under the hood perfectly, which has a positive effect on the engine and cooling system components. Temperature resistance: 1100'C Wastegate size: 35/38mm Interior layer: Material with high silica dioxide content Filling layer: Ceramic wool External layer: Magma Edge trimming material: Magma..
41.22€
Ex Tax:34.35€
FMIC.Pro wastegate blanket is a professional product from a completely new, innovative series of thermal insulation.The first, inner layer is made of a material which, thanks to the high content of silicon dioxide, can easily handle heated up to 1000'C wastegate body. The blanket is filled with a thick layer of ceramic wool, which effectively stops the temperature, and the whole blanket is covered with carbon fiber material. Thanks to such a combination, despite constant contact with temperatures exceeding 1000'C, FMIC.Pro blanket is an excellent thermal barrier, does not discolour, and after dismantling it remains flexible and suitable for reapplication. The FMIC.Pro blanket can be used in extreme conditions, making it suitable for professional racing cars. It reduces the temperature under the hood perfectly, which has a positive effect on the engine and cooling system components. Temperature resistance: 1100'C Wastegate size: 40/45mm Interior layer: Material with high silica dioxide content Filling layer: Ceramic wool External layer: Carbon fibres Edge trimming material: Magma..
63.17€
Ex Tax:52.64€
FMIC.Pro wastegate blanket is a professional product from a completely new, innovative series of thermal insulation.The first, inner layer is made of a material which, thanks to the high content of silicon dioxide, can easily handle heated up to 1000'C wastegate body. The blanket is filled with a thick layer of ceramic wool, which effectively stops the temperature, and the whole blanket is covered with magma style material, used in thermal insulation bandages, additionally interlaced with carbon fibres. Thanks to such a combination, despite constant contact with temperatures exceeding 1000'C, FMIC.Pro blanket is an excellent thermal barrier, does not discolour, and after dismantling it remains flexible and suitable for reapplication. The FMIC.Pro blanket can be used in extreme conditions, making it suitable for professional racing cars. It reduces the temperature under the hood perfectly, which has a positive effect on the engine and cooling system components. Temperature resistance: 1100'C Wastegate size: 40/45mm Interior layer: Material with high silica dioxide content Filling layer: Ceramic wool External layer: Magma with carbon fibres Edge trimming material: Magma..
53.41€
Ex Tax:44.51€
FMIC.Pro wastegate blanket is a professional product from a completely new, innovative series of thermal insulation.The first, inner layer is made of a material which, thanks to the high content of silicon dioxide, can easily handle heated up to 1000'C wastegate body. The blanket is filled with a thick layer of ceramic wool, which effectively stops the temperature, and the whole blanket is covered with magma style material, used in thermal insulation bandages. Thanks to such a combination, despite constant contact with temperatures exceeding 1000'C, FMIC.Pro blanket is an excellent thermal barrier, does not discolour, and after dismantling it remains flexible and suitable for reapplication. The FMIC.Pro blanket can be used in extreme conditions, making it suitable for professional racing cars. It reduces the temperature under the hood perfectly, which has a positive effect on the engine and cooling system components. Temperature resistance: 1100'C Wastegate size: 40/45mm Interior layer: Material with high silica dioxide content Filling layer: Ceramic wool External layer: Magma Edge trimming material: Magma..
43.66€
Ex Tax:36.38€
FMIC.Pro wastegate blanket is a professional product from a completely new, innovative series of thermal insulation.The first, inner layer is made of a material which, thanks to the high content of silicon dioxide, can easily handle heated up to 1000'C wastegate body. The blanket is filled with a thick layer of ceramic wool, which effectively stops the temperature, and the whole blanket is covered with carbon fiber material. Thanks to such a combination, despite constant contact with temperatures exceeding 1000'C, FMIC.Pro blanket is an excellent thermal barrier, does not discolour, and after dismantling it remains flexible and suitable for reapplication. The FMIC.Pro blanket can be used in extreme conditions, making it suitable for professional racing cars. It reduces the temperature under the hood perfectly, which has a positive effect on the engine and cooling system components. Temperature resistance: 1100'C Wastegate size: 50/54mm Interior layer: Material with high silica dioxide content Filling layer: Ceramic wool External layer: Carbon fibres Edge trimming material: Magma..
65.61€
Ex Tax:54.67€
FMIC.Pro wastegate blanket is a professional product from a completely new, innovative series of thermal insulation.The first, inner layer is made of a material which, thanks to the high content of silicon dioxide, can easily handle heated up to 1000'C wastegate body. The blanket is filled with a thick layer of ceramic wool, which effectively stops the temperature, and the whole blanket is covered with magma style material, used in thermal insulation bandages, additionally interlaced with carbon fibres. Thanks to such a combination, despite constant contact with temperatures exceeding 1000'C, FMIC.Pro blanket is an excellent thermal barrier, does not discolour, and after dismantling it remains flexible and suitable for reapplication. The FMIC.Pro blanket can be used in extreme conditions, making it suitable for professional racing cars. It reduces the temperature under the hood perfectly, which has a positive effect on the engine and cooling system components. Temperature resistance: 1100'C Wastegate size: 50/54mm Interior layer: Material with high silica dioxide content Filling layer: Ceramic wool External layer: Magma with carbon fibres Edge trimming material: Magma..
55.85€
Ex Tax:46.54€
FMIC.Pro wastegate blanket is a professional product from a completely new, innovative series of thermal insulation.The first, inner layer is made of a material which, thanks to the high content of silicon dioxide, can easily handle heated up to 1000'C wastegate body. The blanket is filled with a thick layer of ceramic wool, which effectively stops the temperature, and the whole blanket is covered with magma style material, used in thermal insulation bandages. Thanks to such a combination, despite constant contact with temperatures exceeding 1000'C, FMIC.Pro blanket is an excellent thermal barrier, does not discolour, and after dismantling it remains flexible and suitable for reapplication. The FMIC.Pro blanket can be used in extreme conditions, making it suitable for professional racing cars. It reduces the temperature under the hood perfectly, which has a positive effect on the engine and cooling system components. Temperature resistance: 1100'C Wastegate size: 50/54mm Interior layer: Material with high silica dioxide content Filling layer: Ceramic wool External layer: Magma Edge trimming material: Magma..
46.10€
Ex Tax:38.41€
FMIC.Pro wastegate blanket is a professional product from a completely new, innovative series of thermal insulation.The first, inner layer is made of a material which, thanks to the high content of silicon dioxide, can easily handle heated up to 1000'C wastegate body. The blanket is filled with a thick layer of ceramic wool, which effectively stops the temperature, and the whole blanket is covered with carbon fiber material. Thanks to such a combination, despite constant contact with temperatures exceeding 1000'C, FMIC.Pro blanket is an excellent thermal barrier, does not discolour, and after dismantling it remains flexible and suitable for reapplication. The FMIC.Pro blanket can be used in extreme conditions, making it suitable for professional racing cars. It reduces the temperature under the hood perfectly, which has a positive effect on the engine and cooling system components. Temperature resistance: 1100'C Wastegate size: 60mm Interior layer: Material with high silica dioxide content Filling layer: Ceramic wool External layer: Carbon fibres Edge trimming material: Magma..
68.05€
Ex Tax:56.71€
FMIC.Pro wastegate blanket is a professional product from a completely new, innovative series of thermal insulation.The first, inner layer is made of a material which, thanks to the high content of silicon dioxide, can easily handle heated up to 1000'C wastegate body. The blanket is filled with a thick layer of ceramic wool, which effectively stops the temperature, and the whole blanket is covered with magma style material, used in thermal insulation bandages, additionally interlaced with carbon fibres. Thanks to such a combination, despite constant contact with temperatures exceeding 1000'C, FMIC.Pro blanket is an excellent thermal barrier, does not discolour, and after dismantling it remains flexible and suitable for reapplication. The FMIC.Pro blanket can be used in extreme conditions, making it suitable for professional racing cars. It reduces the temperature under the hood perfectly, which has a positive effect on the engine and cooling system components. Temperature resistance: 1100'C Wastegate size: 60mm Interior layer: Material with high silica dioxide content Filling layer: Ceramic wool External layer: Magma with carbon fibres Edge trimming material: Magma..
58.29€
Ex Tax:48.58€
FMIC.Pro wastegate blanket is a professional product from a completely new, innovative series of thermal insulation.The first, inner layer is made of a material which, thanks to the high content of silicon dioxide, can easily handle heated up to 1000'C wastegate body. The blanket is filled with a thick layer of ceramic wool, which effectively stops the temperature, and the whole blanket is covered with magma style material, used in thermal insulation bandages. Thanks to such a combination, despite constant contact with temperatures exceeding 1000'C, FMIC.Pro blanket is an excellent thermal barrier, does not discolour, and after dismantling it remains flexible and suitable for reapplication. The FMIC.Pro blanket can be used in extreme conditions, making it suitable for professional racing cars. It reduces the temperature under the hood perfectly, which has a positive effect on the engine and cooling system components. Temperature resistance: 1100'C Wastegate size: 60mm Interior layer: Material with high silica dioxide content Filling layer: Ceramic wool External layer: Magma Edge trimming material: Magma..
46.10€
Ex Tax:38.41€