AFR Kits
2.5m Innovate wideband cable (LM-2,MTX-L) 8 ft sensor cable for use with Bosch LSU 4.2 O² Sensor - P/N: 3810 Compatible with the LM-2, LC-2, and MTX-L, SCG-1, DLG-1, PSB-1, and PSN-1. NOTE: The latest generation widebands are compatible with both the Bosch LSU 4.2 and 4.9. Please note that the sensor connector is different for each sensor. Reference the Sensor/ Sensor cable identifier image below. Another way to verify which sensor is being used is to connect the unit to the LM Programmer software. Please reference your user manual for more details...
57.56€
Ex Tax:47.97€
5.5m wideband sensor cable, Innovate (LM-2, Innovate MTX-L) 18 ft sensor cable for use with Bosch LSU 4.2 O² Sensor Compatible with the LM-2, LC-2, and MTX-L, SCG-1, DLG-1, PSB-1, and PSN-1...
89.76€
Ex Tax:74.80€
AFR Digital MTX-L gauge, Innovate with wideband – 1m cable The evolution of the world’s most popular stand alone digital O2 sensor controller, the Innovate Motorsports MTX-L builds upon the legacy of the XD-16 by adding simplicity and leading edge technology. The MTX-L utilizes 100% digital wideband air/fuel ratio technology. The MTX-L’s patented award-winning DirectDigital™ signal processing technology provides data on exactly how rich or lean an engine is running at any load. The MTX-L’s self-calibrating circuitry also compensates for changes in temperature, altitude, and sensor condition. The MTX-L includes a digital input/output, 2 full-programmable analog outputs, and is ideal for applications such as dynamometers, data acquisition systems, standalone ECUs, and gauges. - Patented DirectDigital™ wideband sensor control, 100% digital wideband air/fuel ratio technology!- Digital display in AFR or Lambda- 52mm (2 1/6”) diameter gauge body- Built-in Direct Digital™ Wideband Controller reduces wiring and simplifies installation- Wideband O2 Sensor is compatible with all fuel types (Leaded, Unleaded, Diesel, Methanol, E85, etc)- Ability to calibrate O2 sensor for increased accuracy- Configurable linear 0-5v analog output for wideband O² for use with piggy back or stand alone ECU’s as well as external data loggers- Interchangeable faceplates and bezels: Black and silver bezel, black and white faceplates included- Large digital readout and programmable “Digital Needle” provides the functionality of a needle style gauge with the pinpoint accuracy of a digital display- Datalog using LogWorks on your PC- Innovate MTS serial in/out (for use with other Innovate & 3rd party MTS enabled devices to add additional logging channels)..
258.29€
Ex Tax:215.24€
AFR Digital MTX-L gauge, Innovate with wideband – 2.5m cable..
246.10€
Ex Tax:205.08€
AFR Digital MTX-L PLUS gauge, Innovate with wideband – 0,9m cable Manufacturer: Innovate Article number: INO-3924 The New MTX-L PLUS wideband gauge features our patented DirectDigital™ technology and all-new Advanced Sensor Control which receives feedback from the sensor more frequently and optimizes heater control. The combination of these technologies makes the MTX-L Plus our fastest, most durable and accurate air/fuel ratio gauge ever! ADVANCED SENSOR CONTROL FASTER Sensor Frequency for faster O2 sensor feedback FASTER Analog Output Speed helps ensure that your ECU sees changes in air/fuel ratio as they happen ENHANCED Heater Control for superior sensor performance in forced induction and other high performance applications Large digital readout and programmable “Digital Needle” provides the functionality of a needle gauge with the pinpoint accuracy of a digital display Digital display in AFR or Lambda 52mm (2 1/16”) diameter gauge body with included interchangeable faceplates and bezels Bosch™ LSU 4.9 wideband O2 sensor Patented 100% digital wideband air/fuel ratio technology! Ability to calibrate O2 sensor for maximum accuracy Wideband O2 compatible with several fuel types Innovate MTS serial in/out (for use with MTS enabled devices to add additional logging channels) Datalog using powerful LogWorks software on your PC MTX-L PLUS: Digital Wideband Air/Fuel Ratio Gauge Kit (3 Ft.) - Includes: Gauge, Silver Bezel, Black Bezel, White Faceplate, Black Faceplate, LSU 4.9 Wideband O2 Sensor, 3 Ft. Sensor Cable (Overall length 5 ft.), 1" Exhaust Bung, Program Cable, and Manual...
281.95€
Ex Tax:234.96€
AFR Digital MTX-L PLUS gauge, Innovate with wideband – 2,5m cable Manufacturer: Innovate Article number: INO-3918 The New MTX-L PLUS wideband gauge features our patented DirectDigital™ technology and all-new Advanced Sensor Control which receives feedback from the sensor more frequently and optimizes heater control. The combination of these technologies makes the MTX-L Plus our fastest, most durable and accurate air/fuel ratio gauge ever! ADVANCED SENSOR CONTROL FASTER Sensor Frequency for faster O2 sensor feedback FASTER Analog Output Speed helps ensure that your ECU sees changes in air/fuel ratio as they happen ENHANCED Heater Control for superior sensor performance in forced induction and other high performance applications Large digital readout and programmable “Digital Needle” provides the functionality of a needle gauge with the pinpoint accuracy of a digital display Digital display in AFR or Lambda 52mm (2 1/16”) diameter gauge body with included interchangeable faceplates and bezels Bosch™ LSU 4.9 wideband O2 sensor Patented 100% digital wideband air/fuel ratio technology! Ability to calibrate O2 sensor for maximum accuracy Wideband O2 compatible with several fuel types Innovate MTS serial in/out (for use with MTS enabled devices to add additional logging channels) Datalog using powerful LogWorks software on your PC MTX-L PLUS: Digital Wideband Air/Fuel Ratio Gauge Kit (8 Ft.) - Includes: Gauge, Silver Bezel, Black Bezel, White Faceplate, Black Faceplate, LSU 4.9 Wideband O2 Sensor, 8 Ft. Sensor Cable (Overall length 10 ft.), 1" Exhaust Bung, Program Cable, and Manual...
281.95€
Ex Tax:234.96€
AFR G4 Gauge, Innovate (white) The G4 Air/Fuel Ratio gauge (52mm, 2 1/16”) features a high-speed stepper motor, through-dial backlighting, and an illuminated pointer. Each kit includes the gauge, an LC-2 wideband controller, oxygen sensor, serial cable, bung, and is compatible with the award-winning LogWorks engine-tuning software. Key benefits of the “G4” kits include: Patented DirectDigital™ wideband sensor control, 100% digital wideband air/fuel ratio technology! One additional available analog output (one connects to the gauge). Easy set up and wiring (instructions included). LC-2 includes Innovate serial in & out for adding additional modular tuning system (MTS) components. (Gauge itself is analog only- no serial). Illuminated needle and through-dial backlighting. Log directly from the LC-2’s digital output into laptop w/ LogWorks software: For tuners seeking the most cost-effective way to start monitoring Air/Fuel Ratio, the G4 gauges offer an attractive option, while opening the world of true digital data acquisition and software engine analysis. For example, users can add multi-sensor interfaces, and log 5 critical parameters directly into any PC or laptop. Or they can get a PL-1 data logger for hundreds of hours of 32-channel data logging on an SD card. Best of all, the G4 gauges are compatible with the powerful LogWorks software for synchronous high-speed logging of wideband data, other MTS sensors, and data from a growing list of “piggyback” fuel controllers and standalone or factory (OBD2) ECUs. This is the same software used by champion engine builders and racers. The G4 Gauge can be purchased as an accessory to be used with the LC-1, LC-2, LM-1, or LM-2.. These kits includes the G4 Gauge, mounting hardware, and quick-start guide. The G4 Gauge Kit comes complete with the patented award-winning LC-2 Wideband Controller, G4 Gauge, Bosch 5-wire Wideband 02 Sensor, Bung, Serial Cable, LogWorks Software (Free Download), and instructions...
131.46€
Ex Tax:109.55€
AFR G5 Gauge, Innovate (black) The G5 Air/Fuel Ratio gauge (52mm, 2 1/16”) features a high-speed stepper motor, through-dial backlighting, and an illuminated pointer. Each kit includes the gauge, an LC-2 wideband controller, oxygen sensor, serial cable, bung, and is compatible with the award-winning LogWorks engine-tuning software. Key benefits of the “G5” kits include: Patented DirectDigital™ wideband sensor control, 100% digital wideband air/fuel ratio technology! One additional available analog output (one connects to the gauge). Easy set up and wiring (instructions included). LC-2 includes Innovate serial in & out for adding additional modular tuning system (MTS) components. (Gauge itself is analog only- no serial). Illuminated needle and through-dial backlighting. Log directly from the LC-2’s digital output into laptop w/ LogWorks software: For tuners seeking the most cost-effective way to start monitoring Air/Fuel Ratio, the G5 gauges offer an attractive option, while opening the world of true digital data acquisition and software engine analysis. For example, users can add multi-sensor interfaces, and log 5 critical parameters directly into any PC or laptop. Or they can get a PL-1 data logger for hundreds of hours of 32-channel data logging on an SD card. Best of all, the G5 gauges are compatible with the powerful LogWorks software for synchronous high-speed logging of wideband data, other MTS sensors, and data from a growing list of “piggyback” fuel controllers and standalone or factory (OBD2) ECUs. This is the same software used by champion engine builders and racers. The G5 Gauge can be purchased as an accessory to be used with the LC-1, LC-2, LM-1, or LM-2.. These kits includes the G5 Gauge, mounting hardware, and quick-start guide. The G5 Gauge Kit comes complete with the patented award-winning LC-2 Wideband Controller, G5 Gauge, Bosch 5-wire Wideband 02 Sensor, Bung, Serial Cable, LogWorks Software (Free Download), and instructions...
131.46€
Ex Tax:109.55€
Bosch LSU 4.9 kit with 5,5m cable (probe + cable 5,5m)..
163.17€
Ex Tax:135.98€
Bosch LSU 4.9 wideband with 2,5m cable (sensor + 2,5m cable)..
131.46€
Ex Tax:109.55€
Datalogger Innovate PL-1 The PL-1 is the latest in Innovate Motorsports’ line-up of products to allow for easy data logging of your MTS (Modular Tuning System) compatible product. Whether you have an LC-1 & SSI-4, MTX gauges, or any other combination of Innovate Motorsports MTS devices, the PL-1 integrates seamlessly to record all the data from the connected devices.- Record up to 32-channels of Innovate MTS compatible devices- Sample rate of 12 times per second- Log directly to SD card (included) 2GB SD = 580 hours of recording!- Playback log data with powerful LogWorks software - Positive lock connectors for all connections- Innovate MTS serial IN- Trigger recording on PL-1 and/or with "optional" remote push button Specifications: Power Operating Voltage 12V to 18V DC Input Current, Operating 200mA Temperature Operating 0°C - 70°C (32°F - 158°F) Inputs Serial IN Innovate MTS Compatible Recording SD Memory Card 17 Minutes Per MB (1024 MB in 1 GB) Card Format FAT 16 & FAT 32 Recording Sample Rate 12 Sa/S General Dimensions 2.2" x 1" x 1.8" Weight 0.10 lb Complete kit includes:- PL-1, Pocket Logger- 2GB SD Memory Card- SD Memory Card Reader, USB to PC- Power Cable, 12v- LogWorks 3.0 Software- MTS Patch Cable, Locking 4-pin to 4-pin, for newer devices like the MTX gauges- MTS Patch Cable, 2.5mm to 4-pin, needed for LC-1, SSI-4, TC-4, & LMA-3..
109.51€
Ex Tax:91.26€
DB Blue Innovate gauge,- blue light This gauge can be purchased as an accessory to be used with the LC-1, LC-2, LM-1, or LM-2. These kits include the DB Gauge, mounting hardware, and quick-start guide. The Innovate Motorsports DB gauges are 52mm (2 1/16”) air fuel gauges. Each gauge features a bright LED (available in blue or red). Each kit includes the gauge, an LC-2 wideband controller, oxygen sensor, bung, serial cable, and is compatible with the award-winning LogWorks engine-tuning software. Key benefits of the “DB” kits include: Patented DirectDigital™ wideband sensor control, 100% digital wideband air/fuel ratio technology! One additional available analog output (one connects to the gauge). Easy set up and wiring (instructions included). LC-2 incIudes Innovate serial in & out for adding additional modular tuning system (MTS) components. (Gauge itself is analog only- no serial). “Blackout” appearance when unpowered. Log directly from the LC-2’s digital output into laptop w/ LogWorks software: For tuners seeking the most cost-effective way to start monitoring Air/Fuel Ratio, the DB series gauges offer an attractive option, while opening the world of true digital data acquisition and software engine analysis. For example, users can add multi-sensor interfaces, and log 5 critical parameters directly into any PC or laptop. Or they can get a PL-1 data logger for hundreds of hours of 32-channel data logging on an SD card. Best of all, the DB gauges are compatible with the powerful LogWorks software for synchronous high-speed logging of wideband data, other MTS sensors, and data from a growing list of “piggyback” fuel controllers and standalone or factory (OBD2) ECUs. This is the same software used by champion engine builders and racers. The DB-Blue, DB-Red, or DB-Green Gauge can be purchased as an accessory to be used with the LC-1, LC-2, LM-1, or LM-2. These kits includes the DB Gauge, mounting hardware, and quick-start guide. The DB-Blue, DB-Red, or DB-Green Gauge Kit comes complete with the patented award-winning LC-2 Wideband Controller, DB Gauge, Bosch 5-wire Wideband 02 Sensor, Bung, Serial Cable, instructions, and is compatible with LogWorks Software (Free Download). ..
116.83€
Ex Tax:97.36€
DB Green Innovate gauge,- green light **Gauge Only** This gauge can be purchased as an accessory to be used with the LC-1, LC-2, LM-1, or LM-2. These kits include the DB Gauge, mounting hardware, and quick-start guide. The Innovate Motorsports DB gauges are 52mm (2 1/16”) air fuel gauges. Each gauge features a bright LED (available in blue or red). Each kit includes the gauge, an LC-2 wideband controller, oxygen sensor, bung, serial cable, and is compatible with the award-winning LogWorks engine-tuning software. Key benefits of the “DB” kits include: Patented DirectDigital™ wideband sensor control, 100% digital wideband air/fuel ratio technology! One additional available analog output (one connects to the gauge). Easy set up and wiring (instructions included). LC-2 incIudes Innovate serial in & out for adding additional modular tuning system (MTS) components. (Gauge itself is analog only- no serial). “Blackout” appearance when unpowered. Log directly from the LC-2’s digital output into laptop w/ LogWorks software: For tuners seeking the most cost-effective way to start monitoring Air/Fuel Ratio, the DB series gauges offer an attractive option, while opening the world of true digital data acquisition and software engine analysis. For example, users can add multi-sensor interfaces, and log 5 critical parameters directly into any PC or laptop. Or they can get a PL-1 data logger for hundreds of hours of 32-channel data logging on an SD card. Best of all, the DB gauges are compatible with the powerful LogWorks software for synchronous high-speed logging of wideband data, other MTS sensors, and data from a growing list of “piggyback” fuel controllers and standalone or factory (OBD2) ECUs. This is the same software used by champion engine builders and racers. The DB-Blue, DB-Red, or DB-Green Gauge can be purchased as an accessory to be used with the LC-1, LC-2, LM-1, or LM-2. These kits includes the DB Gauge, mounting hardware, and quick-start guide. The DB-Blue, DB-Red, or DB-Green Gauge Kit comes complete with the patented award-winning LC-2 Wideband Controller, DB Gauge, Bosch 5-wire Wideband 02 Sensor, Bung, Serial Cable, instructions, and is compatible with LogWorks Software (Free Download). ..
106.34€
Ex Tax:88.62€
DB Red Innovate gauge,- red light **Gauge Only** This gauge can be purchased as an accessory to be used with the LC-1, LC-2, LM-1, or LM-2. These kits include the DB Gauge, mounting hardware, and quick-start guide. The Innovate Motorsports DB gauges are 52mm (2 1/16”) air fuel gauges. Each gauge features a bright LED (available in blue or red). Each kit includes the gauge, an LC-2 wideband controller, oxygen sensor, bung, serial cable, and is compatible with the award-winning LogWorks engine-tuning software. Key benefits of the “DB” kits include: Patented DirectDigital™ wideband sensor control, 100% digital wideband air/fuel ratio technology! One additional available analog output (one connects to the gauge). Easy set up and wiring (instructions included). LC-2 incIudes Innovate serial in & out for adding additional modular tuning system (MTS) components. (Gauge itself is analog only- no serial). “Blackout” appearance when unpowered. Log directly from the LC-2’s digital output into laptop w/ LogWorks software: For tuners seeking the most cost-effective way to start monitoring Air/Fuel Ratio, the DB series gauges offer an attractive option, while opening the world of true digital data acquisition and software engine analysis. For example, users can add multi-sensor interfaces, and log 5 critical parameters directly into any PC or laptop. Or they can get a PL-1 data logger for hundreds of hours of 32-channel data logging on an SD card. Best of all, the DB gauges are compatible with the powerful LogWorks software for synchronous high-speed logging of wideband data, other MTS sensors, and data from a growing list of “piggyback” fuel controllers and standalone or factory (OBD2) ECUs. This is the same software used by champion engine builders and racers. The DB-Blue, DB-Red, or DB-Green Gauge can be purchased as an accessory to be used with the LC-1, LC-2, LM-1, or LM-2. These kits includes the DB Gauge, mounting hardware, and quick-start guide. The DB-Blue, DB-Red, or DB-Green Gauge Kit comes complete with the patented award-winning LC-2 Wideband Controller, DB Gauge, Bosch 5-wire Wideband 02 Sensor, Bung, Serial Cable, instructions, and is compatible with LogWorks Software (Free Download). ..
116.83€
Ex Tax:97.36€
Dual channel AFR DLG-1, Innovate AFR gauge for 2 lambda sensors - Monitor left and right exhaust banks on one single gauge!- Perfect for all V configured engines- Plug & Play setup for both O2 sensors- No PC required for additional configuration- 52mm (2 1/16”) diameter gauge body- Interchangeable faceplates and bezels: Black and silver bezel, black and white faceplates included- User configurable OLED display (AFR or Lambda)- Multiple ways to display data on gauge- Patented DirectDigital™ wideband sensor control, 100% digital wideband air/fuel ratio technology!- Wideband O2 Compatible with several fuel types (Leaded, Unleaded, Diesel, E85 & more)- Ability to calibrate O2 sensors for maximum accuracy- Configurable linear 0-5v analog output for wideband O² for use with piggy back or stand alone ECU’s as well as external data loggers- Innovate MTS serial in/out (for use with other Innovate & 3rd party MTS enabled devices to add additional logging channels)- Datalog both O2 channels using powerful LogWorks software on your PC..
516.10€
Ex Tax:430.08€
SCG-1: Solenoid Boost Controller & Wideband O2 Gauge The Innovate Motorsports SCG-1 is a revolutionary approach to boost control that integrates an advanced standalone boost controller with Innovate’s industry leading DirectDigital™ wideband air fuel ratio technology. When we decided to build a boost controller, we knew we had to offer more capabilities than other products available today, while still maintaining the user friendly functionality demanded by our customers. Instead of repackaging the same boost control technology that has been used for decades, we choose to pair our advanced O2 sensor control technology with our all-new, proprietary solenoid control that provides superior boost control accuracy, response and safety. We also added a user programmable shift light and housed the entire package in a compact gauge body for ease of installation and use. As with all of our air/fuel ratio products, the SCG-1 utilizes our 100% digital wideband air/fuel ratio technology to provide real time feedback to the SCG-1. This air/fuel information is displayed on an integrated OLED display along with manifold pressure and wastegate duty status. The air/fuel ratio information is also used to provide a user definable boost cut that enhances the safety margin over most competitors offerings that only rely on over boost threshold. The SCG-1 has a full-programmable analog output ideal for applications using standalone ECU’s, piggy-back ECU’s or external data loggers. The SCG-1 also has a digital input/output for integration with our other Modular Tuning System (MTS) devices. This same digital output can be used to record air/fuel ratio, solenoid duty cycle, engine speed and manifold pressure with our free LogWorks PC software to help you dial in a perfect boost curve. All-in-one, intelligent boost control and wideband air/fuel ratio gauge Controller and display housed in 52mm (2 1/16”) diameter gauge body Interchangeable faceplates & bezels: Black & silver bezel, black & white faceplates included No PC required for configuration OLED user configurable display Boost, shift light, Air/Fuel ratio AFR or Lambda, inHG, PSI, kPa, or BAR Includes high resolution solenoid 4 BAR map sensor, pressure range -29 inHG to 43.5 PSI (-1 to 3 BAR) User programmable boost cut safety using Air/Fuel and Pressure references Programmable solenoid duty cycle with separate gain control function Peak hold function Patented DirectDigital™ wideband sensor control, 100% digital wideband air/fuel ratio technology! Wideband O2 Compatible with several fuel types (Leaded, Unleaded, Diesel, E85 & more) Ability to calibrate O2 sensor for maximum accuracy Configurable linear 0-5v analog output for wideband O2 for use with piggy back or stand alone ECU’s as well as external data loggers Innovate MTS serial in/out (for use with other Innovate & 3rd party MTS enabled devices to add additional logging channels) 4 channels of log-able data with powerful LogWorks PC Software (MAP, RPM, A/F, WG duty)..
574.63€
Ex Tax:478.86€
Gauge DB Blue Innovate,- Blue light The G2 Air/Fuel Ratio gauge (52mm, 2 1/16”) features a high-speed stepper motor, through-dial backlighting, and an illuminated pointer. Each kit includes the gauge, an LC-2 wideband controller, oxygen sensor, bung, and is compatible with the award-winning LogWorks engine-tuning software. Key benefits of the “G2” kits include: Patented DirectDigital™ wideband sensor control, 100% digital wideband air/fuel ratio technology! One additional available analog output (one connects to the gauge). Easy set up and wiring (instructions included). LC-2 includes Innovate serial in & out for adding additional modular tuning system (MTS) components. (Gauge itself is analog only- no serial). Illuminated needle and through-dial backlighting. “Blackout” appearance when unpowered. Log directly from the LC-2’s digital output into laptop w/ LogWorks software For tuners seeking the most cost-effective way to start monitoring Air/Fuel Ratio, the G2 gauges offer an attractive option, while opening the world of true digital data acquisition and software engine analysis. For example, users can add multi-sensor interfaces (starting as low as $135), and log 5 critical parameters directly into any PC or laptop. Or they can get a PL-1 data logger for hundreds of hours of 32-channel data logging on an SD card. Best of all, the G2 gauges are compatible with the powerful LogWorks software for synchronous high-speed logging of wideband data, other MTS sensors, and data from a growing list of “piggyback” fuel controllers and standalone or factory (OBD2) ECUs. This is the same software used by champion engine builders and racers. The G2 Gauge can be purchased as an accessory to be used with the LC-1, LC-2, LM-1, or LM-2. These kits includes the G3 Gauge, mounting hardware, and quick-start guide. The G2 Gauge Kit comes complete with the patented award-winning LC-2 Wideband Controller, G2 Gauge, Bosch 5-wire Wideband 02 Sensor, Bung, Serial Cable, instructions, and is compatible with LogWorks Software (Free Download). Note: The G2 gauges have NO serial capability, and will only display AFR in the Gasoline scale...
131.46€
Ex Tax:109.55€
Gauge DB Blue Innovate,- Red light The G3 Air/Fuel Ratio gauge (52mm, 2 1/16”) features a high-speed stepper motor, through-dial backlighting, and an illuminated pointer. Each kit includes the gauge, an LC-2 wideband controller, oxygen sensor, bung, and is compatible with the award-winning LogWorks engine-tuning software. Key benefits of the “G3” kits include: Patented DirectDigital™ wideband sensor control, 100% digital wideband air/fuel ratio technology! One additional available analog output (one connects to the gauge). Easy set up and wiring (instructions included). LC-2 includes Innovate serial in & out for adding additional modular tuning system (MTS) components. (Gauge itself is analog only- no serial). Illuminated needle and through-dial backlighting. “Blackout” appearance when unpowered. Log directly from the LC-2’s digital output into laptop w/ LogWorks software For tuners seeking the most cost-effective way to start monitoring Air/Fuel Ratio, the G3 gauges offer an attractive option, while opening the world of true digital data acquisition and software engine analysis. For example, users can add multi-sensor interfaces (starting as low as $135), and log 5 critical parameters directly into any PC or laptop. Or they can get a PL-1 data logger for hundreds of hours of 32-channel data logging on an SD card. Best of all, the G3 gauges are compatible with the powerful LogWorks software for synchronous high-speed logging of wideband data, other MTS sensors, and data from a growing list of “piggyback” fuel controllers and standalone or factory (OBD2) ECUs. This is the same software used by champion engine builders and racers. The G3 Gauge can be purchased as an accessory to be used with the LC-1, LC-2, LM-1, or LM-2. These kits includes the G3 Gauge, mounting hardware, and quick-start guide. The G3 Gauge Kit comes complete with the patented award-winning LC-2 Wideband Controller, G3 Gauge, Bosch 5-wire Wideband 02 Sensor, Bung, Serial Cable, instructions, and is compatible with LogWorks Software (Free Download). Note: The G3 gauges have NO serial capability, and will only display AFR in the Gasoline scale...
131.46€
Ex Tax:109.55€
Inductive signal clamp for Innovate, (LMA-2, LMA-3, D-32 & LM-2) -Inductive Clamp Accessory for LM-2. -Simply clamp on to one spark plug wire to log RPM. -Cable is 6 feet in length...
40.98€
Ex Tax:34.15€
Innovate 12mm to 18mm Motorcycle Bung Adapter This Stainless Steel adapter allows you to use a full size 18mm thread O2 Sensor in a 12mm Original Equipment bung. Most Import Motorcycles, ATV's etc. come with a 12mm O2 sensor. This adapter allows you to use one of Innovate's Data loggers or Gauges without the need of welding in a new Bung. This Adapter allows mounting the O2 Sensor at a 45-degree angle. The nut allows you to point the Adapter in any direction for the greatest amount of clearance. It also (not shown) comes with a copper sealing washer...
48.54€
Ex Tax:40.45€
Innovate HBX-1, (Heat-Sink Bung Extender) The HBX-1 is intended to provide a degree of thermal isolation in applications where the pipe temperature exceeds 900 º F (approx. 500º C) with a heat-sinking design intended to screw into a new or existing 18mm bung...
89.76€
Ex Tax:74.80€
KEY FEATURES 100 pct. Digital Wideband Air/Fuel Ratio Technology Built-In RPM Converter [Direct Freq. or w/Opt. Inductive Clamp] Large High-Contrast Graphics LCD Log Directly To SD Card OBDII Scan Tool-Read/Clear DTCs and Log Up to 16 Channels Patented DirectDigital™ Wideband Sensor Control Playback Log Data On Screen And/Or w/Powerful LogWorks Software Single or Dual Channel A/F Version Available Wideband O2 Compatible w/All Fuel Types DESCRIPTION Weight 6.0 lbsSKU 38060 The LM-2 combines an air/fuel ratio meter, a full-function 32-channel datalogger, and powerful software to deliver a complete tuning workshop for less than the cost of one dyno day. Whether you have a piggy-back fuel controller, race carb, aftermarket ECU, ODB-II tuning software, or a flash/chip programmer, an LM-2 is the tool you need to dial in maximum HP. The meter’s award-winning digital signal processing technology provides data on exactly how rich or lean an engine is running at any load. The LM-2’s self-calibrating circuitry also compensates for changes in temperature, altitude, and sensor condition. The LM-2 also features two fully programmable linear analog outputs to connect to analog gauges, dyno computers, ECUs, piggyback controllers, and other devices with analog inputs. With the provided LM Programmer software these analog outputs may also be defined by the user. KIT INCLUDES LM-2 Meter, Bosch LSU4.9 O2 Sensor, 8 ft sensor cable, cigarette-lighter power adapter, analog in/out cable, ODB-II/CAN interface cable, SD memory card, USB cable, 1" bung and plug, Carrying Case, and manual...
662.44€
Ex Tax:552.03€
KEY FEATURES100 pct. Digital Wideband Air/Fuel Ratio TechnologyBuilt-In RPM Converter [Direct Freq. or w/Opt. Inductive Clamp]Large High-Contrast Graphics LCDLog Directly To SD CardOBDII Scan Tool-Read/Clear DTCs and Log Up to 16 ChannelsPatented DirectDigital™ Wideband Sensor ControlPlayback Log Data On Screen And/Or w/Powerful LogWorks SoftwareSingle or Dual Channel A/F Version AvailableWideband O2 Compatible w/All Fuel Types DESCRIPTIONWeight 7.0 lbsSKU 38070 The LM-2 combines an air/fuel ratio meter, a full-function 32-channel datalogger, and powerful software to deliver a complete tuning workshop for less than the cost of one dyno day. Whether you have a piggy-back fuel controller, race carb, aftermarket ECU, ODB-II tuning software, or a flash/chip programmer, an LM-2 is the tool you need to dial in maximum HP. The meter’s award-winning digital signal processing technology provides data on exactly how rich or lean an engine is running at any load. The LM-2’s self-calibrating circuitry also compensates for changes in temperature, altitude, and sensor condition. The LM-2 also features two fully programmable linear analog outputs to connect to analog gauges, dyno computers, ECUs, piggyback controllers, and other devices with analog inputs. With the provided LM Programmer software these analog outputs may also be defined by the user. KIT INCLUDESLM-2 Meter, (2) Bosch LSU4.9 O2 Sensors, (2) 8 ft sensor cables, cigarette-lighter power adapter, analog in/out cable, ODB-II/CAN interface cable, SD memory card, USB cable, (2) 1" bung and plugs, Carrying Case, and manual. ..
691.70€
Ex Tax:576.42€
Innovate 3808 Replacement Power Cable for LM-2 AFR Meter..
26.34€
Ex Tax:21.95€
Molex 4 pin to 2.5mm patch cable allows you to mate the newer style serial connector (Molex 4 pin) to the older style used in the LC-1, LMA-3, DL-32, SSI-4, and TC-4. This will allow you to daisy-chain multiple Innovate Motorsports devices for data logging or real-time viewing with the LogWorks software...
22.44€
Ex Tax:18.70€
Innovate LM-2 Window Mount The "Window Mount" will allow you to have the LM-2 mounted to your windshield. This will help provide a better view of the display while tuning...
63.41€
Ex Tax:52.85€
DESCRIPTION Weight 3.5 lbsSKU 38370The LM-2 combines an air/fuel ratio meter, a full-function 32-channel datalogger, and powerful software to deliver a complete tuning workshop for less than the cost of one dyno day. Whether you have a piggy-back fuel controller, race carb, aftermarket ECU, ODB-II tuning software, or a flash/chip programmer, an LM-2 is the tool you need to dial in maximum HP. The meter’s award-winning digital signal processing technology provides data on exactly how rich or lean an engine is running at any load. The LM-2’s self-calibrating circuitry also compensates for changes in temperature, altitude, and sensor condition. The LM-2 also features two fully programmable linear analog outputs to connect to analog gauges, dyno computers, ECUs, piggyback controllers, and other devices with analog inputs. With the provided LM Programmer software these analog outputs may also be defined by the user. KEY FEATURES 100 pct. Digital Wideband Air/Fuel Ratio Technology Built-In RPM Converter [Direct Freq. or w/Opt. Inductive Clamp] Large High-Contrast Graphics LCD Log Directly To SD Card OBDII Scan Tool-Read/Clear DTCs and Log Up to 16 Channels Patented DirectDigital™ Wideband Sensor Control Playback Log Data On Screen And/Or w/Powerful LogWorks Software Single or Dual Channel A/F Version Available Wideband O2 Compatible w/All Fuel Types KIT INCLUDES LM-2 Meter, Bosch LSU4.9 O2 Sensor, 8 ft sensor cable, cigarette-lighter power adapter, USB cable, 1" bung and plug, and manual...
613.66€
Ex Tax:511.38€
Innovate MTX Digital gauge, EGT GT gauge is "SINGLE FUNCTION"DISPLAY RANGE Temp: 32 - 1999 °F (0-1093 °C) KEY FEATURES Change from EGT to CHT range. CHT range allows greater resolution Display in either °F or °C Change exterior LED as a fill bar or light a single indicating LED Program exterior LED ranges vs Color Program EGT Warning...
213.66€
Ex Tax:178.05€
Wideband Air/Fuel Ratio 8 AFR to 18 AFR KEY FEATURES Patented DirectDigital™ wideband sensor control, 100% digital wideband air/fuel ratio technology! Bosch LSU 4.9 wideband O2 sensor Ability to calibrate O2 sensor for maximum accuracy P/N: 3855, MSRP $259 KIT INCLUDES: Gauge (Black Faceplate, Not Interchangeable), Black Bezel, Silver Bezel, LSU 4.9 Wideband O2 Sensor, 8 Ft. Sensor Cable (Overall length 10 ft.), Exhaust Bung, Program Cable (Only needed for Datalogging and Updates), and Manual...
291.71€
Ex Tax:243.09€
DISPLAY RANGE Pressure Range -25 inHG to 20 PSI P/N: 3857, MSRP $219 KIT INCLUDES: Gauge (Black Faceplate, Not Interchangeable), Black Bezel, Silver Bezel, Program Cable (Serial), 4-Bar MAP Sensor, MAP Accessory Kit: T Fitting, Vacuum Hose, and Zip Ties, Quick Start Installation Guide..
262.44€
Ex Tax:218.70€
Innovate PSB-1 gauge, POWER SAFE BOOST with AFR reading The PowerSafe gauges combine our patented DirectDigital™ O2 sensor control technology with application specific sensors, an OLED display, and a smart safety override circuit for your high performance vehicle. Our PowerSafe technology can disable your factory or aftermarket boost control solenoid forcing the system to spring pressure. In nitrous applications, our PowerSafe technology will disable your nitrous solenoid to keep your engine safe. The PowerSafe gauges offer the looks, safety and performance enthusiast’s demand! All-in-one, boost safety override and wideband air/fuel ratio gauge 52mm (2 1/6”) diameter gauge body Interchangeable faceplates and bezels: Black and silver bezel, black and white faceplates included No PC required for configuration OLED user configurable display Boost, shift light, Air/Fuel ratio AFR or Lambda, inHG, PSI, kPa, or BAR 4 BAR map sensor, pressure range -29 inHG to 43.5 PSI (-1 to 3 BAR) User programmable boost cut safety using Air/Fuel and Pressure references Boost cut by pressure Boost cut by lean air/fuel condition Valet mode that will temporarilty hold the system at spring pressure Peak hold function Patented DirectDigital™ wideband sensor control, 100% digital wideband air/fuel ratio technology! Wideband O2 Compatible with several fuel types (Leaded, Unleaded, Diesel, E85 & more) Ability to calibrate O2 sensor for maximum accuracy Configurable linear 0-5v analog output for wideband O² for use with piggy back or stand alone ECU’s as well as external data loggers 30A Relay included Innovate MTS serial in/out (for use with other Innovate & 3rd party MTS enabled devices to add additional logging channels) 3 channels of log-able data with powerful LogWorks PC Software (MAP, RPM, A/F) PSB-1: PowerSafe Boost & Air/Fuel Ratio Gauge Kit - includes the PSB-1 gauge, LSU 4.9 Wideband oxygen O2 sensor, 8 ft sensor cable, 4-Bar MAP Sensor, Relay, O2 sensor weld-on bung, Black/Silver bezel, Black/White faceplate, Serial program cable, & Installation manual. P/N: 3892..
389.27€
Ex Tax:324.39€
Innovate LM-2 Basic kit, – AFR sensor with display The new LM-2 "Basic" Kit (Dual O2 Wideband O2) ONLY includes the LM-2 meter, Bosch wide-band oxygen sensor, 8 ft sensor cable, cigarette-lighter power adapter, USB cable for PC connection, weld-in bung and plug ,and manual. *Note: The LM-2 "Basic" Kit out of the box only includes accessories to display your Air/Fuel Ratio either on the meter and/or on your PC. To log RPM, or to Output the wideband signal to an external device you'll need the LM-2 Analog IN/OUT Cable (P/N: 3811) optional accessory. For OBD-II features you'll need the LM-2 OBD-II Cable (P/N: 3809) optional accessory. To record internally to your LM-2 you'll need the SD Card (P/N: 3787) optional accessory. This unit also comes in a cardboard box, the black hard case is an optional accessory LM-2 Carrying Case (P/N: 3836)* *LM-2 Dual "BASIC" Kit includes the LM-2 meter, (2) Bosch wide-band oxygen sensors, (2) 8 ft sensor cables, cigarette-lighter power adapter, USB cable for PC connection, (2) weld-in bung and plug kits, and manual. P/N: 38940..
525.85€
Ex Tax:438.21€
The Ethanol Advanced gauges combine our patented DirectDigital™ O2 sensor control technology with application specific sensors, an OLED display, and a sophisticated ethanol content sensor that also measures fuel temperature. These capabilities allow the user to monitor and capture critical metrics for accurate and reliable tuning while operating with high ethanol content fuel. The Ethanol Advanced gauges offer the looks, safety and performance enthusiasts demand! Four-in-one, ethanol content percentage, fuel temperature, fuel pressure, and wideband air/fuel ratio gauge OLED user configurable display (one, two, or four channel viewing modes) Ethanol %, Fuel Pressure, Fuel Temperature, Air/Fuel ratio °F or °C, AFR or Lambda, PSI, kPa, or BAR On screen error reporting for ethanol content sensor and wideband O2 Warning indicator LED for low fuel pressure (user programmable) 0-145 PSI (10 Bar) fuel pressure sensor 4-Configurable analog outputs for use with standalone and other programmable ECU’s as well as external data loggers Ethanol Content: 0v = 0%, 5v = 100% Fuel Temp: 0v = -40 °F, 5v = 257 °F (-40-125°C) Fuel Press: 0v = 0 PSI, 5v = 145.04 PSI (0-10 BAR) Wideband Air/Fuel Ratio: 0v = 7.35, 5v = 22.39 AFR (0.50-1.52 Lambda) 52mm (2 1/6”) diameter gauge body with interchangeable faceplates and bezels: Black and silver bezel, black and white faceplates included No PC required for configuration Bosch LSU 4.9 wideband O2 sensor Patented DirectDigital™ wideband sensor control, 100% digital wideband air/fuel ratio technology! Wideband O² Compatible with several fuel types (Leaded, Unleaded, Diesel, E85 & more) Ability to calibrate O² sensor for maximum accuracy Innovate MTS serial in/out (for use with other Innovate & 3rd party MTS enabled devices to add additional logging channels) ECF-1: (FUEL) Ethanol Advanced Gauge Complete Kit, includes Ethanol Sensor, Fuel Pressure Sensor, Fuel Line Fitting (3/8" M to 3/8" F w/1/8" NPT Side Port, O2 Sensor, & Bung P/N: 3903..
633.17€
Ex Tax:527.64€
Innovate MTX Digital gauge, Ethanol % and fuel temperature DISPLAY RANGE Ethanol Content %: 0-100% Temp: -40-257 °F (-40-125°C) KEY FEATURES Ethanol Content Error reporting for ethanol content sensor (Digital Display) Fuel Temp Change exterior LED as a fill bar or light a single indicating LED Programmable exterior LED ranges vs. color Programmable unit of measure as °F or °C Programmable fuel temperature warning (outer LED) 2-Configurable analog outputs Ethanol Content: 0v = 0%, 5v = 100% Fuel Temp: 0v = -40 °F, 5v = 257 °F (-40-125°C) MTX-D: Ethanol Content Percentage & Fuel Temp Gauge Kit, includes: Gauge (Black Faceplate, Black Bezel), Silver Bezel & White Faceplate, Harness, Program Cable (Serial), Ethanol Content Sensor, Quick Start Installation Guide. P/N: 3904, MSRP $239 ..
291.71€
Ex Tax:243.09€
The Ethanol Advanced gauges combine our patented DirectDigital™ O2 sensor control technology with application specific sensors, an OLED display, and a sophisticated ethanol content sensor that also measures fuel temperature. These capabilities allow the user to monitor and capture critical metrics for accurate and reliable tuning while operating with high ethanol content fuel. The Ethanol Advanced gauges offer the looks, safety and performance enthusiasts demand! Four-in-one, ethanol content percentage, fuel temperature, boost pressure, and wideband air/fuel ratio gauge Boost Vision - a real-time calculated approximation of your ECU’s boost limit based on current ethanol content percentage OLED user configurable display (one, two, or four channel viewing modes) Ethanol %, Vacuum/Boost, Target Boost, Peak Boost, Fuel Temp, Air/Fuel ratio °F or °C, AFR or Lambda, inHG, PSI, kPa, or BAR On screen error reporting for ethanol content sensor and wideband O2 Warning indicator LED when actual boost exceeds target boost (user programmable) Peak hold function 4 BAR map sensor, pressure range -29 inHG to 43.5 PSI (-1 to 3 BAR) 3-Configurable analog outputs for use with standalone and other programmable ECU’s as well as external data loggers Ethanol Content: 0v = 0%, 5v = 100% Fuel Temp: 0v = -40 °F, 5v = 257 °F (-40-125°C) Wideband Air/Fuel Ratio: 0v = 7.35, 5v = 22.39 AFR (0.50-1.52 Lambda) Pressure readings can be adjusted for altitude differences 52mm (2 1/6”) diameter gauge body with interchangeable faceplates and bezels: Black and silver bezel, black and white faceplates included No PC required for configuration Bosch LSU 4.9 wideband O2 sensor Patented DirectDigital™ wideband sensor control, 100% digital wideband air/fuel ratio technology! Wideband O2 Compatible with several fuel types (Leaded, Unleaded, Diesel, E85 & more) Ability to calibrate O2 sensor for maximum accuracy Innovate MTS serial in/out (for use with other Innovate & 3rd party MTS enabled devices to add additional logging channels) ECB-1: (BOOST) Ethanol Advanced Gauge Complete Kit, includes Ethanol Sensor, 4 BAR MAP Sensor, O2 Sensor, & Bung P/N: 3906 Installation and Setup Installation of the ECB-1. Complete documentation is supplied, and the support pages, application notes and tuner resources can also speed you on your way to effective tuning. Innovate also has a great network of local dealers, tuners, race shops, and dyno shops that can assist you in choosing, installing, and getting the most out of your Innovate products. Click here to find a dealer near you. Weight 3.75 lbs..
486.83€
Ex Tax:405.69€
Innovate MTX Digital gauge, Ethanol % and fuel temperature DISPLAY RANGE Ethanol Content %: 0-100% Temp: -40-257 °F (-40-125°C) KEY FEATURES Ethanol Content Error reporting for ethanol content sensor (Digital Display) Fuel Temp Change exterior LED as a fill bar or light a single indicating LED Programmable exterior LED ranges vs. color Programmable unit of measure as °F or °C Programmable fuel temperature warning (outer LED) 2-Configurable analog outputs Ethanol Content: 0v = 0%, 5v = 100% Fuel Temp: 0v = -40 °F, 5v = 257 °F (-40-125°C) MTX-D: Ethanol Content Percentage & Fuel Temp Gauge Kit, includes: Gauge (Black Faceplate, Black Bezel), Silver Bezel & White Faceplate, Harness, Program Cable (Serial), Quick Start Installation Guide. P/N: 3904, MSRP $239 ..
242.93€
Ex Tax:202.44€
Innovate 3917 gauge MTX Digital gauge kit, fuel pressure Fuel Pressure gauge is "SINGLE FUNCTION" DISPLAY RANGE Pressure: 0-145 PSI (10 BAR) KEY FEATURES Industrial grade electronic pressure sensor Display in either PSI or BAR Change exterior LED as a fill bar or light a single indicating LED Programmable low fuel pressure warning KIT INCLUDES: Gauge (Black Faceplate, Black Bezel), Silver Bezel & White Faceplate, Program Cable (Serial), Electronic Pressure Sensor, Cable for Pressure Sensor, Quick Start Installation Guide...
242.93€
Ex Tax:202.44€
Innovate 3935 MTX-OL PLUS: Wideband Air/Fuel OLED Gauge Kit (8 Ft. Cable) - P/N: 39350 USA-INO-3935 The new MTX-OL Plus from Innovate Motorsports is the most accurate, responsive and reliable wideband AFR gauge ever built. The all-new advanced sensor control drastically increases sensor feedback frequency and optimizes heater control to set a new standard for performance in every application. The MTX-OL Plus features a vivid, high-contrast OLED display that’s easy to read and looks incredible. Innovate’s patented DirectDigital™ technology combined with a Bosch ™ LSU 4.9 wideband sensor provide category defining speed and accuracy. Interchangeable dials and bezels allows for simple cosmetic customization. An integrated serial in/out port allows for seamless integration with Innovate MTS devices and easy data logging of critical AFR readings using the powerful free LogWorks software package. • User configurable OLED display (AFR or Lambda) • 52mm (2-1/16”) diameter gauge body • Interchangeable faceplates and bezels: black and silver bezel, black and white faceplates included • Bosch™ LSU 4.9 wideband O2 sensor • Patented 100% digital wideband air/fuel ratio technology • Ability to calibrate O2 sensor for maximum accuracy • Wideband O2 compatible with several fuel types • Configurable linear 0-5v analog output for wideband O2 for use with piggy back or stand-alone ECU’s as well as external data loggers • Innovate MTS serial in/out (for use with MTS enabled devices to add additional logging channels) • Datalog using powerful LogWorks software on your PC..
320.98€
Ex Tax:267.48€
Innovate 4-Channel EGT Kit (TC-4, 4 Type-K EGT Probes) The TC-4 device is 4 channel thermocouple interface device for the MTS (Modular Tuning System). The TC-4 may be used as a stand-alone 4 channel thermocouple amplifier for logging directly into LogWorks or it can be used in conjunction with any other MTS compliant device to retrieve key temperature metrics . Each of the four inputs of the TC-4 can be configured by the user for either EGT range (32-1999 deg F, 0-1093 deg C) or for CHT range to measure cylinder head temperatures (32-572 deg F, 0-300 deg C). The TC-4 can also be used to measure other temperature metrics such as turbo inlet and outlet temp, catalytic converter temp, transmission temp, and more. The TC-4 is also a key component of Innovate Motorsports' Modular Tuning System (MTS). Using the TC-4's serial ports you can daisy-chain other Innovate devices such as the XD-16, AuxBox (LMA-3), LC-1, DL-32, and SSI-4. The TC-4 includes the TC-4, Program Cable, Patch Cable (to daisy chain with other MTS compatible devices), and Mounting hardware...
519.27€
Ex Tax:432.72€
Innovate Auto Box LMA-3 LMA-3 Multi-sensor Device (AuxBox) The AuxBox attaches to the auxiliary input of the LM-1 or it can be integrated into the MTS serial chain. The AuxBox has 5 built-in sensors. The 5 internal sensors are: Manifold Air Pressure (MAP or Boost), Cylinder Head Temperature (CHT) or Exhaust Gas Temperature (EGT), RPM conversion (from a tach signal or inductive clamp), Acceleration, and Injector Duty Cycle (or Dwell). The internal MAP sensor is a 3-bar absolute pressure sensor, providing accurate data up to 44.1 PSIA. The temperature measurement circuit features a K-type thermocouple. The internal accelerometer features 2 axis measurements for a variety of mounting options. The AuxBox also includes 5 external inputs for connecting external sensors in lieu of the internal sensors. This allows users to log data from external sensors like TPS or MAF. Provides 5 channels of data:- 3-Bar MAP / Boost- RPM- Injector Duty Cycle- EGT / CHT- 2-Axis Accelerometer- MTS compliant Another key application of the AuxBox is road testing. Even a dyno doesn’t provide as much real data as road testing. Factors like air flow, side force, and load vary significantly on a real road. Use LogWorks to view fuel mapping, perform statistical analysis, overlay graphs, and playback a log on the virtual gauges. You can also view real-time data on LogWorks’ gauges if you want to take your laptop on the road. Correlating AFR, RPM, MAP, and CHT, for example, is essential when tuning piggy-back fuel controllers, ECUs, or performance carburetors. The AuxBox can be used with the LM-1 or with any of our MTS compatible units. The AuxBox ships with mounting hardware, and serial cable...
270.49€
Ex Tax:225.41€
Innovate Bosch LSU4.9 Upgrade Kit, 3 ft. (Sensor Cable + O2 Sensor)..
121.71€
Ex Tax:101.42€
Innovate Clamp for EGT probe (no weld) The tapered cone minimizes possible exhaust leaks at sensor entrance. The square clamp saddle prevents sensor rotation. The clamp dimples allow for pipe expansion due to extreme exhaust temperatures and the Brass body/ferrule can tolerate multiple installations.Our lower profile allows installation in confined areas. Includes #32 Clamp (1 9/16"-2 1/2"), Nut, Brass Ferrule & Base...
28.05€
Ex Tax:23.37€
Innovate Extended Bung/Plug Kit, (Stainless Steel) 1 inch Tall..
15.85€
Ex Tax:13.21€
Innovate Extended Bung/Plug Kit, (Titanium) 1 inch Tall Bung is titanium, plug is mild steel...
42.68€
Ex Tax:35.57€
Innovate LC-2 controller, Innovate wideband with module The evolution of the world’s most popular stand alone digital O2 sensor controller, the Innovate Motorsports LC-2 builds upon the legacy of the LC-1 by adding simplicity and leading edge technology. The LC-2 utilizes 100% digital wideband air/fuel ratio technology on the market! The LC-2’s patented award-winning DirectDigital™ signal processing technology provides data on exactly how rich or lean an engine is running at any load. The LC-2’s self-calibrating circuitry also compensates for changes in temperature, altitude, and sensor condition. The LC-2 includes a digital input/output, 2 full-programmable analog outputs, and is ideal for applications such as dynamometers, data acquisition systems, standalone ECUs, and gauges. The LC-2 can also be "daisy-chained" for cost-effective individual cylinder monitoring, and is fully compatible with our Modular Tuning System (MTS). Key features include: KEY FEATURES Patented DirectDigital™ Wideband Technology Wideband O² Compatible with ALL fuel types Ability to calibrate O² sensor for maximum accuracy Integrated dual-color status LED (Green/Red) *2-Configurable linear 0-5v analog outputs Optional sensor cable lengths available: 3ft, 8ft (Included), and 18ft Positive lock connectors for all connections Innovate MTS serial in/out Serial connection to your PC Real-time display data on screen and/or with powerful LogWorks software *Two fully programmable linear analog outputs to connect to analog gauges, dyno computers, ECUs, piggyback controllers, and other devices with analog inputs. Analog Output #1 (Yellow) is configured as 0 volt = 7.35 AFR and 5 volts = 22.39 AFR; Analog Output #2 (Brown) 1.1 volt = 14 AFR and .1 volt = 15 AFR. With the provided LM Programmer software these analog outputs may also be configured by the user. Specifications Power Operating Voltage 9.8V to 16V DC Input Current, O² heater initial warm-up 2.0A nominal, 3A max Input Current, O² normal operation 0.8A nominal, 1.1A max Environmental Operating ambient temperature 0° to 140° F (−17.78° to 60° C) Storage ambient temperature −40° to 185° F (−40° to 85° C) Water resistance Splash resistant, non-submersible Sensors Compatible Types Bosch™ LSU4.2 & Bosch™ LSU4.9 Bosch™ Heater Control Digital PID via pump-cell impedance Measurements Lambda .5 to 8.0 Air/Fuel Ratio 7.35 to 117 (gasoline), Fuel Type Programmable Accuracy For Lambda Accurate to +/- .007 (.1 AFR) Response Time Free Air to Lambda < 100 mS ( < 25 mS typical) Inputs Serial 1, Innovate MTS Compatible Outputs Analog 2, 0-5VDC, 10 bit resolution, programmable Serial 1, Innovate MTS Compatible Communication Serial MTS (Innovate Modular Tuning System) compatible..
219.51€
Ex Tax:182.93€
Innovate LC-2 controller, Innovate wideband sensor with module (0,9m cable) The evolution of the world’s most popular stand alone digital O2 sensor controller, the Innovate Motorsports LC-2 builds upon the legacy of the LC-1 by adding simplicity and leading edge technology. The LC-2 utilizes 100% digital wideband air/fuel ratio technology on the market! The LC-2’s patented award-winning DirectDigital™ signal processing technology provides data on exactly how rich or lean an engine is running at any load. The LC-2’s self-calibrating circuitry also compensates for changes in temperature, altitude, and sensor condition. The LC-2 includes a digital input/output, 2 full-programmable analog outputs, and is ideal for applications such as dynamometers, data acquisition systems, standalone ECUs, and gauges. The LC-2 can also be "daisy-chained" for cost-effective individual cylinder monitoring, and is fully compatible with our Modular Tuning System (MTS). Key features include: KEY FEATURES Patented DirectDigital™ Wideband Technology Wideband O² Compatible with ALL fuel types Ability to calibrate O² sensor for maximum accuracy Integrated dual-color status LED (Green/Red) *2-Configurable linear 0-5v analog outputs Optional sensor cable lengths available: 3ft, 8ft (Included), and 18ft Positive lock connectors for all connections Innovate MTS serial in/out Serial connection to your PC Real-time display data on screen and/or with powerful LogWorks software *Two fully programmable linear analog outputs to connect to analog gauges, dyno computers, ECUs, piggyback controllers, and other devices with analog inputs. Analog Output #1 (Yellow) is configured as 0 volt = 7.35 AFR and 5 volts = 22.39 AFR; Analog Output #2 (Brown) 1.1 volt = 14 AFR and .1 volt = 15 AFR. With the provided LM Programmer software these analog outputs may also be configured by the user. Specifications Power Operating Voltage 9.8V to 16V DC Input Current, O² heater initial warm-up 2.0A nominal, 3A max Input Current, O² normal operation 0.8A nominal, 1.1A max Environmental Operating ambient temperature 0° to 140° F (−17.78° to 60° C) Storage ambient temperature −40° to 185° F (−40° to 85° C) Water resistance Splash resistant, non-submersible Sensors Compatible Types Bosch™ LSU4.2 & Bosch™ LSU4.9 Bosch™ Heater Control Digital PID via pump-cell impedance Measurements Lambda .5 to 8.0 Air/Fuel Ratio 7.35 to 117 (gasoline), Fuel Type Programmable Accuracy For Lambda Accurate to +/- .007 (.1 AFR) Response Time Free Air to Lambda < 100 mS ( < 25 mS typical) Inputs Serial 1, Innovate MTS Compatible Outputs Analog 2, 0-5VDC, 10 bit resolution, programmable Serial 1, Innovate MTS Compatible Communication Serial MTS (Innovate Modular Tuning System) compatible Set includes: - LC-2 Controller- Bosch Wideband O² Sensor- 3 Ft. Sensor Cable (Overall length 5 ft.)- 1" Mild-Steel Exhaust Bung- Program Cable- Manual...
233.90€
Ex Tax:194.92€
Innovate OT-2 Opentune OBD-II/CAN Interface (LC-2 & O2 Sensor) The OT-2 is a simple device that wirelessly connects your iPhone or iPod Touch to your vehicle. When used with the free Logworks Mobile app, the OT-2 transforms your iPhone into a wireless: Gauge or digital dash, Data logger, Dyno, OBDII Scan Tool, Efficiency Meter...
343.66€
Ex Tax:286.38€
Innovate OT-2 Opentune OBD-II/CAN Interface The OT-2 is a simple device that wirelessly connects your iPhone or iPod Touch to your vehicle. When used with the free Logworks Mobile app, the OT-2 transforms your iPhone into a wireless: Gauge or digital dash, Data logger, Dyno, OBDII Scan Tool, Efficiency Meter...
177.80€
Ex Tax:148.17€
Innovate Program Cable: LC-1, XD-1, Aux Box to PC The Serial Program Cable will allow you to connect any of the following devices to your PC. (LC-1, XD-16, LMA-3, DL-32, SSI-4, TC-4)..
21.22€
Ex Tax:17.68€
Innovate Program Cable: MTX Series The Serial Program Cable will allow you to connect the MTX series gauges, LM-2, LC-2 SCG-1, PSB-1, and PSN-1 to your PC...
22.20€
Ex Tax:18.50€
Innovate PSN-1 gauge kit, PowerSafe Nitrous Bottle Press & Wideband O2 Gauge Kit The PowerSafe gauges combine our patented DirectDigital™ O2 sensor control technology with application specific sensors, an OLED display, and a smart safety override circuit for your high performance vehicle. Our PowerSafe technology can disable your factory or aftermarket boost control solenoid forcing the system to spring pressure. In nitrous applications, our PowerSafe technology will disable your nitrous solenoid to keep your engine safe. The PowerSafe gauges offer the looks, safety and performance enthusiast’s demand! - All-in-one, Nitrous safety overide and wideband air/fuel ratio gauge w/RPM window switch- 52mm (2 1/6”) diameter gauge body- Interchangeable faceplates and bezels: Black and silver bezel, black and white faceplates included- No PC required for configuration- OLED user configurable display- Nitrous Bottle Press., shift light, Air/Fuel ratio- AFR or Lambda, inHG, PSI, kPa, or BAR- 1500 PSI nitrous bottle pressure sensor- User programmable nitrous safety cut using Air/Fuel ratio and bottle pressure references- Nitrous cut by lean air/fuel condition- Nitrous cut by minimum bottle pressure- User programmable RPM window swtich range, 10 RPM increments- 30A Relay included- Patented DirectDigital™ wideband sensor control, 100% digital wideband air/fuel ratio technology!- Wideband O2 Compatible with several fuel types (Leaded, Unleaded, Diesel, E85 & more)- Ability to calibrate O2 sensor for maximum accuracy- Configurable linear 0-5v analog output for wideband O2 for use with piggy back or stand alone ECU’s as well as external data loggers- Innovate MTS serial in/out (for use with other Innovate & 3rd party MTS enabled devices to add additional logging channels)- 4 channels of log-able data with powerful LogWorks PC Software (MAP, RPM, A/F, Nitrous solenoid active)..
467.32€
Ex Tax:389.43€
Innovate SSI-4 (4 Channel Simple Sensor Interface) The SSI-4 device is a simple sensor interface that adds 4 inputs to an MTS Log Chain. The SSI-4 may also be used as a stand-alone device for logging data directly into a laptop with LogWorks software or it can be used in conjunction with any other MTS compliant device. Channel 1 is a direct RPM input by default, and can also be configured for external 0-5V or frequency. Channels 2-4 are configured to digitize external 0-5V analog signals by default but they can setup to directly measure frequency (like driveshaft speed) or duty cycle (for injectors). The SSI-4 is also a key component of Innovate Motorsports' Modular Tuning System (MTS). Using the SSI-4's serial ports you can daisy-chain other Innovate devices such as the XD-16, AuxBox (LMA-3), LC-1, DL-32, and TC-4. The SSI-4 includes the SSI-4, Program Cable, Patch Cable (to daisy chain with other MTS compatible devices), and Mounting hardware...
148.54€
Ex Tax:123.78€
Innovate TC-4 unitfor EGT – 4 channels The TC-4 device is 4 channel thermocouple interface device for the MTS (Modular Tuning System). The TC-4 may be used as a stand-alone 4 channel thermocouple amplifier for logging directly into LogWorks or it can be used in conjunction with any other MTS compliant device to retrieve key temperature metrics . Each of the four inputs of the TC-4 can be configured by the user for either EGT range (32-1999 deg F, 0-1093 deg C) or for CHT range to measure cylinder head temperatures (32-572 deg F, 0-300 deg C). The TC-4 can also be used to measure other temperature metrics such as turbo inlet and outlet temp, catalytic converter temp, transmission temp, and more. The TC-4 is also a key component of Innovate Motorsports' Modular Tuning System (MTS). Using the TC-4's serial ports you can daisy-chain other Innovate devices such as the XD-16, AuxBox (LMA-3), LC-1, DL-32, and SSI-4. The TC-4 includes the TC-4, Program Cable, Patch Cable (to daisy chain with other MTS compatible devices), and Mounting hardware...
148.54€
Ex Tax:123.78€
Innovate USB-to-Serial Adapter Adapter for computers without Serial ports. This cable will convert Serial to USB. Hardware drivers included. Windows 98 SE, ME, 2000, XP, Vista 32, Vista 64, 7 & 8 (with latest driver download)..
42.68€
Ex Tax:35.57€
LC-2 kit with DB Blue gauge, Innovate – blue light, wideband AFR This kit comes complete with the patented award-winning LC-2 Wideband Controller, DB-Blue Gauge, Bosch LSU 4.9 Wideband O2 Sensor, 8ft Sensor Cable, Bung, Serial Cable, and Manual. The Innovate Motorsports DB gauges are 52mm (2 1/16”) air fuel gauges. Each gauge features a bright LED (available in blue or red). Each kit includes the gauge, an LC-2 wideband controller, oxygen sensor, bung, serial cable, and is compatible with the award-winning LogWorks engine-tuning software. Key benefits of the “DB” kits include: Patented DirectDigital™ wideband sensor control, 100% digital wideband air/fuel ratio technology! One additional available analog output (one connects to the gauge). Easy set up and wiring (instructions included). LC-2 incIudes Innovate serial in & out for adding additional modular tuning system (MTS) components. (Gauge itself is analog only- no serial). “Blackout” appearance when unpowered. Log directly from the LC-2’s digital output into laptop w/ LogWorks software: For tuners seeking the most cost-effective way to start monitoring Air/Fuel Ratio, the DB series gauges offer an attractive option, while opening the world of true digital data acquisition and software engine analysis. For example, users can add multi-sensor interfaces, and log 5 critical parameters directly into any PC or laptop. Or they can get a PL-1 data logger for hundreds of hours of 32-channel data logging on an SD card. Best of all, the DB gauges are compatible with the powerful LogWorks software for synchronous high-speed logging of wideband data, other MTS sensors, and data from a growing list of “piggyback” fuel controllers and standalone or factory (OBD2) ECUs. This is the same software used by champion engine builders and racers. The DB-Blue, DB-Red, or DB-Green Gauge can be purchased as an accessory to be used with the LC-1, LC-2, LM-1, or LM-2. These kits includes the DB Gauge, mounting hardware, and quick-start guide. The DB-Blue, DB-Red, or DB-Green Gauge Kit comes complete with the patented award-winning LC-2 Wideband Controller, DB Gauge, Bosch 5-wire Wideband 02 Sensor, Bung, Serial Cable, instructions, and is compatible with LogWorks Software (Free Download)...
278.05€
Ex Tax:231.71€
LC-2 kit with DB Green gauge, Innovate – green light, wideband AFR This kit comes complete with the patented award-winning LC-2 Wideband Controller, DB-Blue Gauge, Bosch LSU 4.9 Wideband O2 Sensor, 8ft Sensor Cable, Bung, Serial Cable, and Manual. The Innovate Motorsports DB gauges are 52mm (2 1/16”) air fuel gauges. Each gauge features a bright LED (available in blue or red). Each kit includes the gauge, an LC-2 wideband controller, oxygen sensor, bung, serial cable, and is compatible with the award-winning LogWorks engine-tuning software. Key benefits of the “DB” kits include: Patented DirectDigital™ wideband sensor control, 100% digital wideband air/fuel ratio technology! One additional available analog output (one connects to the gauge). Easy set up and wiring (instructions included). LC-2 incIudes Innovate serial in & out for adding additional modular tuning system (MTS) components. (Gauge itself is analog only- no serial). “Blackout” appearance when unpowered. Log directly from the LC-2’s digital output into laptop w/ LogWorks software: For tuners seeking the most cost-effective way to start monitoring Air/Fuel Ratio, the DB series gauges offer an attractive option, while opening the world of true digital data acquisition and software engine analysis. For example, users can add multi-sensor interfaces, and log 5 critical parameters directly into any PC or laptop. Or they can get a PL-1 data logger for hundreds of hours of 32-channel data logging on an SD card. Best of all, the DB gauges are compatible with the powerful LogWorks software for synchronous high-speed logging of wideband data, other MTS sensors, and data from a growing list of “piggyback” fuel controllers and standalone or factory (OBD2) ECUs. This is the same software used by champion engine builders and racers. The DB-Blue, DB-Red, or DB-Green Gauge can be purchased as an accessory to be used with the LC-1, LC-2, LM-1, or LM-2. These kits includes the DB Gauge, mounting hardware, and quick-start guide. The DB-Blue, DB-Red, or DB-Green Gauge Kit comes complete with the patented award-winning LC-2 Wideband Controller, DB Gauge, Bosch 5-wire Wideband 02 Sensor, Bung, Serial Cable, instructions, and is compatible with LogWorks Software (Free Download)...
242.93€
Ex Tax:202.44€
LC-2 kit with DB Red gauge, Innovate – red light, wideband AFR This kit comes complete with the patented award-winning LC-2 Wideband Controller, DB-Blue Gauge, Bosch LSU 4.9 Wideband O2 Sensor, 8ft Sensor Cable, Bung, Serial Cable, and Manual. The Innovate Motorsports DB gauges are 52mm (2 1/16”) air fuel gauges. Each gauge features a bright LED (available in blue or red). Each kit includes the gauge, an LC-2 wideband controller, oxygen sensor, bung, serial cable, and is compatible with the award-winning LogWorks engine-tuning software. Key benefits of the “DB” kits include: Patented DirectDigital™ wideband sensor control, 100% digital wideband air/fuel ratio technology! One additional available analog output (one connects to the gauge). Easy set up and wiring (instructions included). LC-2 incIudes Innovate serial in & out for adding additional modular tuning system (MTS) components. (Gauge itself is analog only- no serial). “Blackout” appearance when unpowered. Log directly from the LC-2’s digital output into laptop w/ LogWorks software: For tuners seeking the most cost-effective way to start monitoring Air/Fuel Ratio, the DB series gauges offer an attractive option, while opening the world of true digital data acquisition and software engine analysis. For example, users can add multi-sensor interfaces, and log 5 critical parameters directly into any PC or laptop. Or they can get a PL-1 data logger for hundreds of hours of 32-channel data logging on an SD card. Best of all, the DB gauges are compatible with the powerful LogWorks software for synchronous high-speed logging of wideband data, other MTS sensors, and data from a growing list of “piggyback” fuel controllers and standalone or factory (OBD2) ECUs. This is the same software used by champion engine builders and racers. The DB-Blue, DB-Red, or DB-Green Gauge can be purchased as an accessory to be used with the LC-1, LC-2, LM-1, or LM-2. These kits includes the DB Gauge, mounting hardware, and quick-start guide. The DB-Blue, DB-Red, or DB-Green Gauge Kit comes complete with the patented award-winning LC-2 Wideband Controller, DB Gauge, Bosch 5-wire Wideband 02 Sensor, Bung, Serial Cable, instructions, and is compatible with LogWorks Software (Free Download)...
278.05€
Ex Tax:231.71€
LC-2 with G2 gauge, Innovate with wideband AFR probe The G2 Air/Fuel Ratio gauge (52mm, 2 1/16”) features a high-speed stepper motor, through-dial backlighting, and an illuminated pointer. Each kit includes the gauge, an LC-2 wideband controller, oxygen sensor & bung/plug, and the award-winning LogWorks engine-tuning software...
316.83€
Ex Tax:264.02€
LC-2 with G3 gauge, Innovate with wideband AFR probe The G3 Air/Fuel Ratio gauge (52mm, 2 1/16”) features a high-speed stepper motor, through-dial backlighting, and an illuminated pointer. Each kit includes the gauge, an LC-2 wideband controller, oxygen sensor & bung/plug, and the award-winning LogWorks engine-tuning software...
316.83€
Ex Tax:264.02€
LC-2 with G4 gauge, Innovate with wideband AFR probe This kit comes complete with the patented award-winning LC-2 Wideband Controller, G4 Gauge, Bosch 5-wire Wideband 02 Sensor, Bung, Serial Cable, and Manual...
316.83€
Ex Tax:264.02€
LC-2 with G5 gauge, Innovate with wideband AFR probe This kit comes complete with the patented award-winning LC-2 Wideband Controller, G5 Gauge, Bosch 5-wire Wideband 02 Sensor, 8ft Sensor Cable, Bung, Serial Cable, and Manual...
316.83€
Ex Tax:264.02€
MTX Digital gauge, Innovate Vacuum/Boost & Shift Light (DUAL) DISPLAY RANGE- Boost: -29 inHG to 43.5 PSI (-1 to 3 BAR)- Shift: Up to 20460 RPMKEY FEATURES- Display as either inHG/PSI or BAR (Digital Display)- Over Boost Warning (Digital Display)- Progressive Shift Light or Single Stage Shift Light (outer LEDs)KIT INCLUDES: Gauge (Black Faceplate, Black Bezel), Silver Bezel & White Faceplate, Program Cable (Serial), 4-Bar MAP Sensor, MAP Accessory Kit: T Fitting, Vacuum Hose, and Zip Ties, RPM Harness (6 inch), Quick Start Installation Guide...
213.66€
Ex Tax:178.05€
MTX-D: Oil Pressure & Temperature New design includes industrial grade electronic pressure sensor! DISPLAY RANGE 0-145 PSI (10 Bar) fuel pressure sensor (Wide range +45 PSI over prior version) Temp: 120-280 °F (49-138 °C) KEY FEATURES Pressure Display in either PSI or BAR (Digital Display) Program Low Oil Pressure Warning (Digital Display) Temperature Change exterior LED as a fill bar or light a single indicating LED Program exterior LED ranges vs. Color Program unit of measure as °F or °C Program Oil Temperature Warning (outer LED P/N: 3852 has been replaced by P/N: 3913. KIT INCLUDES: Gauge (Black Faceplate, Black Bezel), Silver Bezel & White Faceplate, Program Cable (Serial), Thermistor, Electronic Pressure Sensor, Cable for Pressure Sensor, Quick Start Installation Guide...
268.29€
Ex Tax:223.58€
MTX Digital gauge, Innovate water temperature & battery voltage (DUAL) DISPLAY RANGE- Water Temp: 120-280 °F (49-138 °C)- Battery V: Volts 6 - 25 VDC KEY FEATURES- Water Temperature - Display in either °F or °C - Water Temp Warning (Digital Display)- Battery Voltage - Program exterior LED ranges vs Color - Program Voltage Warning (outer LEDs)..
187.56€
Ex Tax:156.30€
The SSI-4 PLUS will allow the capture of data from 4 external sensors. These sensors can be frequencies such as engine RPM and speed sensors or 0-5V references like MAP sensors and pressure transducers. The SSI-4 PLUS may be used as a stand-alone system or integrated with other Innovate Motorsports MTS products to create a log chain. • Simple sensor device that adds 4-inputs to an MTS Log Chain • Channel 1 and 2 inputs can be configured for RPM, Speed (VSS), Frequency, and 0-5 volt. In addition to the above, the channel 2 input can be used for duty cycle or dwell. • Channel 3 and 4 inputs can be used for 0-5 volt • 5 volt output to power external sensors The SSI-4 is also a key component of Innovate Motorsports' Modular Tuning System (MTS). Using the SSI-4 PLUS's serial ports you can daisy-chain other Innovate devices such as the MTX-L, LM-2, LC-2, TC-4 PLUS, and . To see examples of diffrent MTS configurations click here. The SSI-4 PLUS includes the SSI-4 PLUS, Serial Program Cable, Molex to Molex Patch Cable (to daisy chain with other MTS compatible devices), and manual. P/N 3914..
164.88€
Ex Tax:137.40€
Wideband controller LC-2, Innovate 2,4m cable (without sensor) The evolution of the world’s most popular stand alone digital O2 sensor controller, the Innovate Motorsports LC-2 builds upon the legacy of the LC-1 by adding simplicity and leading edge technology. The LC-2 utilizes 100% digital wideband air/fuel ratio technology on the market! The LC-2’s patented award-winning DirectDigital™ signal processing technology provides data on exactly how rich or lean an engine is running at any load. The LC-2’s self-calibrating circuitry also compensates for changes in temperature, altitude, and sensor condition. The LC-2 includes a digital input/output, 2 full-programmable analog outputs, and is ideal for applications such as dynamometers, data acquisition systems, standalone ECUs, and gauges. The LC-2 can also be "daisy-chained" for cost-effective individual cylinder monitoring, and is fully compatible with our Modular Tuning System (MTS). Key features include: KEY FEATURES Patented DirectDigital™ Wideband Technology Wideband O² Compatible with ALL fuel types Ability to calibrate O² sensor for maximum accuracy Integrated dual-color status LED (Green/Red) *2-Configurable linear 0-5v analog outputs Optional sensor cable lengths available: 3ft, 8ft (Included), and 18ft Positive lock connectors for all connections Innovate MTS serial in/out Serial connection to your PC Real-time display data on screen and/or with powerful LogWorks software *Two fully programmable linear analog outputs to connect to analog gauges, dyno computers, ECUs, piggyback controllers, and other devices with analog inputs. Analog Output #1 (Yellow) is configured as 0 volt = 7.35 AFR and 5 volts = 22.39 AFR; Analog Output #2 (Brown) 1.1 volt = 14 AFR and .1 volt = 15 AFR. With the provided LM Programmer software these analog outputs may also be configured by the user. Specifications Power Operating Voltage 9.8V to 16V DC Input Current, O² heater initial warm-up 2.0A nominal, 3A max Input Current, O² normal operation 0.8A nominal, 1.1A max Environmental Operating ambient temperature 0° to 140° F (−17.78° to 60° C) Storage ambient temperature −40° to 185° F (−40° to 85° C) Water resistance Splash resistant, non-submersible Sensors Compatible Types Bosch™ LSU4.2 & Bosch™ LSU4.9 Bosch™ Heater Control Digital PID via pump-cell impedance Measurements Lambda .5 to 8.0 Air/Fuel Ratio 7.35 to 117 (gasoline), Fuel Type Programmable Accuracy For Lambda Accurate to +/- .007 (.1 AFR) Response Time Free Air to Lambda < 100 mS ( < 25 mS typical) Inputs Serial 1, Innovate MTS Compatible Outputs Analog 2, 0-5VDC, 10 bit resolution, programmable Serial 1, Innovate MTS Compatible Communication Serial MTS (Innovate Modular Tuning System) compatible Set includes: - LC-2 Controller- 8 Ft. Sensor Cable- Program Cable - Manual DOES NOT INCLUDE O² SENSOR OR BUNG...
160.73€
Ex Tax:133.94€
Wideband AFR sensor exhaust mount Patent-pending, Venturi-effect, tapped exhaust clamp for obtaining accurate lambda measurements in non-cat autos or other engines...
89.76€
Ex Tax:74.80€
Zegar MTX Digital, Innovate Temperatury & Ciśnienia oleju (DUAL) DISPLAY RANGE 0-145 PSI (10 Bar) fuel pressure sensor (Wide range +45 PSI over prior version) Temp: 120-280 °F (49-138 °C)KEY FEATURESPressure- Display in either PSI or BAR (Digital Display)- Program Low Oil Pressure Warning (Digital Display)Temperature- Change exterior LED as a fill bar or light a single indicating LED- Program exterior LED ranges vs. Color- Program unit of measure as °F or °C- Program Oil Temperature Warning (outer LED KIT INCLUDES: Gauge (Black Faceplate, Black Bezel), Silver Bezel & White Faceplate, Program Cable (Serial), Thermistor, Electronic Pressure Sensor, Cable for Pressure Sensor, Quick Start Installation Guide...
258.29€
Ex Tax:215.24€