Fuel rails
When separating two hoses, dry break fittings permit a leak-free disengagement while retaining pressure. Radium dry break couplers use a bayonet style lock that will not leak when disconnected nor introduce air upon reconnection. Simply push and twist the knurled machined surface. They are designed for use in fuel or oil applications and are available in -6AN and/or -8AN flare fittings. The couplers have been successfully tested on Radium's test bench at 150psi engaged and disengaged. The anodized aluminum fittings are available as a set (inner and outer) or as individual parts. If a step up (or down) in hose size is required, the -8AN and -6AN fittings are interchangeable and can be configured as shown below. Important Notes: -Not compatible with methanol fuel. -These fittings flow equally in both directions and can be installed either way. -The higher the operating pressure, the more difficult it becomes to connect and disconnect the coupler. -Due to the dry break coupler design, there will be some inherent flow restriction (pressure drop). -Naturally there might be a drop when engaging and disengaging. -Do not disconnect fittings while pumps are running. Technical Data: -Overall length: -6AN kit = 82mm, -8AN kit = 87mm -Weight: -6AN kit = 62g, -8AN kit = 69g -Average pressure drop across coupler: 1-2psi -Flow loss: 2% at 800LPH..
112.20€
Ex Tax:93.50€
When separating two hoses, dry break fittings permit a leak-free disengagement while retaining pressure. Radium dry break couplers use a bayonet style lock that will not leak when disconnected nor introduce air upon reconnection. Simply push and twist the knurled machined surface. They are designed for use in fuel or oil applications and are available in -6AN and/or -8AN flare fittings. The couplers have been successfully tested on Radium's test bench at 150psi engaged and disengaged. The anodized aluminum fittings are available as a set (inner and outer) or as individual parts. If a step up (or down) in hose size is required, the -8AN and -6AN fittings are interchangeable and can be configured as shown below. Important Notes: -Not compatible with methanol fuel. -These fittings flow equally in both directions and can be installed either way. -The higher the operating pressure, the more difficult it becomes to connect and disconnect the coupler. -Due to the dry break coupler design, there will be some inherent flow restriction (pressure drop). -Naturally there might be a drop when engaging and disengaging. -Do not disconnect fittings while pumps are running. Technical Data: -Overall length: -6AN kit = 82mm, -8AN kit = 87mm -Weight: -6AN kit = 62g, -8AN kit = 69g -Average pressure drop across coupler: 1-2psi -Flow loss: 2% at 800LPH..
112.20€
Ex Tax:93.50€
GM LS7 Fuel Rail Kit – Red Aeromotive High Flow, Billet Fuel Rails combine 3,000 HP flow capabilities with ‘bolt-on’ ease of installation. Fits GM LS7 – Rails Only ORB-08 Ports with compact connections and positive, leak-free sealing. Full 5/8′ ID through bore, capable of supporting up to 3,000 HP. Fully compatible with -10 AN line if combined with custom ORB-08/AN-10 adapter P/N 15641. Full size ports at each end for optimal injector supply and minimal hydraulic fluctuation. Additional inlet/outlet ports are provided where required for plumbing convenience. CNC-machined, billet aluminum construction for unequaled fit and finish. This product is not legal for sale or use on emission-controlled vehicles except when used as a direct replacement part matching OEM specifications. Steel mounting brackets, custom engineered for each application, combining a solid, durable mounting platform with correct fit and ‘bolt-on’ ease of installation. Red or Black dip anodized finish that looks great and protects against corrosion...
389.27€
Ex Tax:324.39€
P/N 14144: 07-09 5.4L GT500 Fuel Rail Kit Aeromotive High Flow, Billet Fuel Rails combine 3,000 HP flow capabilities with ‘bolt-on’ ease of installation. Fits 2007-2009 5.4L Ford Mustang GT500 – Rails Only ORB-08 Ports with compact connections and positive, leak-free sealing. Full 5/8′ ID through bore, capable of supporting up to 3,000 HP. Fully compatible with -10 AN line if combined with custom ORB-08/AN-10 adapter P/N 15641. Full size ports at each end for optimal injector supply and minimal hydraulic fluctuation. Additional inlet/outlet ports are provided where required for plumbing convenience. CNC-machined, billet aluminum construction for unequaled fit and finish. This product is not legal for sale or use on emission-controlled vehicles except when used as a direct replacement part matching OEM specifications. Steel mounting brackets, custom engineered for each application, combining a solid, durable mounting platform with correct fit and ‘bolt-on’ ease of nstallation. Red, Type II bright dip anodized finish that looks great and protects against corrosion...
399.02€
Ex Tax:332.52€
Chrysler 5.7L & 6.1L HEMI Fuel Rail Kit – Red Aeromotive High Flow, Billet Fuel Rails combine 3,000 HP flow capabilities with ‘bolt-on’ ease of installation. Fits 5.7L and 6.1L HEMI engines – Rails Only ORB-08 Ports with compact connections and positive, leak-free sealing. Full 5/8′ ID through bore, capable of supporting up to 3,000 HP. Fully compatible with -10 AN line if combined with custom ORB-08/AN-10 adapter P/N 15641. Full size ports at each end for optimal injector supply and minimal hydraulic fluctuation. Additional inlet/outlet ports are provided where required for plumbing convenience. CNC-machined, billet aluminum construction for unequaled fit and finish. This product is not legal for sale or use on emission-controlled vehicles except when used as a direct replacement part matching OEM specifications. Steel mounting brackets, custom engineered for each application, combining a solid, durable mounting platform with correct fit and ‘bolt-on’ ease of installation. Red or Black anodized finish that looks great and protects against corrosion...
399.02€
Ex Tax:332.52€
P/N 14141: Cobra Jet Fuel Rails Original equipment for the 2012 Ford Cobra Jet Mustangs. Engineered to fit any Ford 4-valve 5.4L like those in the 2008 Cobra Jet and the Shelby GT500, these fuel rails can drastically increase the flow to your injectors. Support more power with more consistent flow. Its the reason Ford engineers chose Aeromotive to fuel the 2012 Cobra Jet. Now you can turn your SN97 Mustang into a Cobra Jet with the Original Equipment from Aeromotive. Complete CJ Fuel Systems available. (see P/N’s 17156-58) Fits 2008 and 2012 Ford Cobra Jet Engines (5.4L 4-vlave) Black anodized finish ORB-08 inlet and outlet ports This product is not legal for sale or use on emission-controlled vehicles except when used as a direct replacement part matching OEM specifications. 5/8″ internal bore..
389.27€
Ex Tax:324.39€
05-09 4.6L 3-Valve GT Fuel Rail Kit – Red or Black Aeromotive High Flow, Billet Fuel Rails combine 3,000 HP flow capabilities with ‘bolt-on’ ease of installation. Fits 2005-2010 Ford Mustang GT – Rails Only ORB-08 Ports with compact connections and positive, leak-free sealing. Full 5/8′ ID through bore, capable of supporting up to 3,000 HP. Fully compatible with -10 AN line if combined with custom ORB-08/AN-10 adapter P/N 15641. Full size ports at each end for optimal injector supply and minimal hydraulic fluctuation. Additional inlet/outlet ports are provided where required for plumbing convenience. CNC-machined, billet aluminum construction for unequaled fit and finish. This product is not legal for sale or use on emission-controlled vehicles except when used as a direct replacement part matching OEM specifications. Steel mounting brackets, custom engineered for each application, combining a solid, durable mounting platform with correct fit and ‘bolt-on’ ease of installation. Red or Black anodized finish that looks great and protects against corrosion...
393.20€
Ex Tax:327.67€
Ford 5.0L 4V Fuel Rails – Red or Black Aeromotive High Flow, Billet Fuel Rails combine 3,000 HP flow capabilities with ‘bolt-on’ ease of installation. Product Features: Fits 2011+ 5.0L Ford Modular Engines ORB-08 Ports with compact connections and positive, leak-free sealing. Full 5/8′ ID through bore, capable of supporting up to 3,000 HP. Full size ports ORB-08 ports at each end for optimal injector supply and minimal hydraulic fluctuation. CNC-machined, billet aluminum construction for unequalled fit and finish. This product is not legal for sale or use on emission-controlled vehicles except when used as a direct replacement part matching OEM specifications. Steel mounting brackets, custom engineered for this application, combining a solid, durable mountingplatform with correct fit and ‘bolt-on’ ease of installation...
393.20€
Ex Tax:327.67€
Aeromotive High Flow, Billet Fuel Rails combine 3,000 HP flow capabilities with ‘bolt-on’ ease of installation. Fits 1986-1998 5.0L Ford – Rails OnlyORB-08 Ports with compact connections and positive, leak-free sealing.Full 5/8′ ID through bore, capable of supporting up to 3,000 HP.Fully compatible with -10 AN line if combined with custom ORB-08/AN-10 adapter P/N 15641.Full size ports at each end for optimal injector supply and minimal hydraulic fluctuation.Additional inlet/outlet ports are provided where required for plumbing convenience.CNC-machined, billet aluminum construction for unequaled fit and finish.This product is not legal for sale or use on emission-controlled vehicles except when used as a direct replacement part matching OEM specifications.Steel mounting brackets, custom engineered for each application, combining a solid, durable mounting platform with correct fit and ‘bolt-on’ ease of installation.Red or Black, Type II bright dip anodized finish that looks great and protects against corrosion. Note: 94-95 Mustang GT 5.0L engines, or any engine using a Thunderbird low profile distributor, may require a small cap conversion or the MSD P/N 8455 Billet Distributor for clearance...
395.11€
Ex Tax:329.26€
Ford 96-04 4.6L SOHC GT Fuel Rail Kit Red – #14103 Black – #14179 Aeromotive High Flow, Billet Fuel Rails combine 3,000 HP flow capabilities with ‘bolt-on’ ease of installation. Fits 1996-2004 SOHC Ford Mustang GT – Rails Only ORB-08 Ports with compact connections and positive, leak-free sealing. Full 5/8′ ID through bore, capable of supporting up to 3,000 HP. Fully compatible with -10 AN line if combined with custom ORB-08/AN-10 adapter P/N 15641. Full size ports at each end for optimal injector supply and minimal hydraulic fluctuation. Additional inlet/outlet ports are provided where required for plumbing convenience. CNC-machined, billet aluminum construction for unequaled fit and finish Steel mounting brackets, custom engineered for each application, combining a solid, durable mounting platform with correct fit and ‘bolt-on’ ease of installation. Red or Black, Type II bright dip anodized finish that looks great and protects against corrosion. This product is not legal for sale or use on emission-controlled vehicles except when used as a direct replacement part matching OEM specifications...
395.11€
Ex Tax:329.26€
96-98 1/2 4.6L DOHC Cobra Fuel Rail Kit – Red or Black Aeromotive High Flow, Billet Fuel Rails combine 3,000 HP flow capabilities with ‘bolt-on’ ease of installation. Fits 1996-1998 1/2 DOHC Ford Mustang Cobra – Rails Only ORB-08 Ports with compact connections and positive, leak-free sealing. Full 5/8′ ID through bore, capable of supporting up to 3,000 HP. Fully compatible with -10 AN line if combined with custom ORB-08/AN-10 adapter P/N 15641. Full size ports at each end for optimal injector supply and minimal hydraulic fluctuation. Additional inlet/outlet ports are provided where required for plumbing convenience. CNC-machined, billet aluminum construction for unequaled fit and finish. This product is not legal for sale or use on emission-controlled vehicles except when used as a direct replacement part matching OEM specifications. Steel mounting brackets, custom engineered for each application, combining a solid, durable mounting platform with correct fit and ‘bolt-on’ ease of installation. Red, Type II bright dip anodized finish that looks great and protects against corrosion...
395.11€
Ex Tax:329.26€
P/N 14117: 97-05 5.4L 2-Valve Truck & SUV Fuel Rail Kit Aeromotive High Flow, Billet Fuel Rails combine 3,000 HP flow capabilities with ‘bolt-on’ ease of installation. Fits 1997-2005 Ford 5.4L 2-valve Trucks & SUVs – Rails Only ORB-08 Ports with compact connections and positive, leak-free sealing. Full 5/8′ ID through bore, capable of supporting up to 3,000 HP. Fully compatible with -10 AN line if combined with custom ORB-08/AN-10 adapter P/N 15641. Full size ports at each end for optimal injector supply and minimal hydraulic fluctuation. Additional inlet/outlet ports are provided where required for plumbing convenience. CNC-machined, billet aluminum construction for unequaled fit and finish. This product is not legal for sale or use on emission-controlled vehicles except when used as a direct replacement part matching OEM specifications. Steel mounting brackets, custom engineered for each application, combining a solid, durable mounting platform with correct fit and ‘bolt-on’ ease of nstallation. Red, Type II bright dip anodized finish that looks great and protects against corrosion...
393.20€
Ex Tax:327.67€
98 ½ – ’04 Ford 4.6L DOHC Fuel Rails Red – #14111 Black – #14175 Aeromotive High Flow, Billet Fuel Rails combine 3,000 HP flow capabilities with ‘bolt-on’ ease of installation. Fits 1998 1/2-2004 DOHC Ford Mustang Cobra – Rails Only ORB-08 Ports with compact connections and positive, leak-free sealing. Full 5/8′ ID through bore, capable of supporting up to 3,000 HP. Fully compatible with -10 AN line if combined with custom ORB-08/AN-10 adapter P/N 15641. Full size ports at each end for optimal injector supply and minimal hydraulic fluctuation. Additional inlet/outlet ports are provided where required for plumbing convenience. CNC-machined, billet aluminum construction for unequaled fit and finish. Steel mounting brackets, custom engineered for each application, combining a solid, durable mounting platform with correct fit and ‘bolt-on’ ease of installation. Red or Black, Type II bright dip anodized finish that looks great and protects against corrosion. This product is not legal for sale or use on emission-controlled vehicles except when used as a direct replacement part matching OEM specifications...
393.20€
Ex Tax:327.67€
99-04 5.4L Lightning/Harley Fuel Rail Kit Red – #14110 Black – #14177 Aeromotive High Flow, Billet Fuel Rails combine 3,000 HP flow capabilities with ‘bolt-on’ ease of installation. Fits 1999-2003 5.4L Ford Lightning & Harley Trucks – Rails Only ORB-08 Ports with compact connections and positive, leak-free sealing. Full 5/8′ ID through bore, capable of supporting up to 3,000 HP. Fully compatible with -10 AN line if combined with custom ORB-08/AN-10 adapter P/N 15641. Full size ports at each end for optimal injector supply and minimal hydraulic fluctuation. Additional inlet/outlet ports are provided where required for plumbing convenience. CNC-machined, billet aluminum construction for unequaled fit and finish. Steel mounting brackets, custom engineered for each application, combining a solid, durable mounting platform with correct fit and ‘bolt-on’ ease of installation. Red or Black anodized finish that looks great and protects against corrosion. This product is not legal for sale or use on emission-controlled vehicles except when used as a direct replacement part matching OEM specifications...
299.21€
Ex Tax:249.34€
96-07 GM Supercharged 3.8L Fuel Rail Kit – Red or Black Aeromotive High Flow, Billet Fuel Rails combine 3,000 HP flow capabilities with ‘bolt-on’ ease of installation. Fits 1996-2007 GM Supercharged 3.8L – Rails Only ORB-08 Ports with compact connections and positive, leak-free sealing. Full 5/8′ ID through bore, capable of supporting up to 3,000 HP. Fully compatible with -10 AN line if combined with custom ORB-08/AN-10 adapter P/N 15641. Full size ports at each end for optimal injector supply and minimal hydraulic fluctuation. Additional inlet/outlet ports are provided where required for plumbing convenience. CNC-machined, billet aluminum construction for unequaled fit and finish. This product is not legal for sale or use on emission-controlled vehicles except when used as a direct replacement part matching OEM specifications. Steel mounting brackets, custom engineered for each application, combining a solid, durable mounting platform with correct fit and ‘bolt-on’ ease of installation. Red or Black anodized finish that looks great and protects against corrosion...
393.20€
Ex Tax:327.67€
97-04 GM LS1 Fuel Rail Kit – Red or Black Aeromotive High Flow, Billet Fuel Rails combine 3,000 HP flow capabilities with ‘bolt-on’ ease of installation. GM 1997-2004 LS1 & 2001-2005 LS6 – Rails Only ORB-08 Ports with compact connections and positive, leak-free sealing. Full 5/8′ ID through bore, capable of supporting up to 3,000 HP. Fully compatible with -10 AN line if combined with custom ORB-08/AN-10 adapter P/N 15641. Full size ports at each end for optimal injector supply and minimal hydraulic fluctuation. Additional inlet/outlet ports are provided where required for plumbing convenience. CNC-machined, billet aluminum construction for unequaled fit and finish. This product is not legal for sale or use on emission-controlled vehicles except when used as a direct replacement part matching OEM specifications. Steel mounting brackets, custom engineered for each application, combining a solid, durable mounting platform with correct fit and ‘bolt-on’ ease of installation. Red or Black anodized finish that looks great and protects against corrosion...
395.11€
Ex Tax:329.26€
GM LS2 Fuel Rails Red – #14114 Black– #14188 Aeromotive High Flow, Billet Fuel Rails combine 3,000 HP flow capabilities with ‘bolt-on’ ease of installation. Fits 2005-2006 GM LS2 – Rails Only ORB-08 Ports with compact connections and positive, leak-free sealing. Full 5/8′ ID through bore, capable of supporting up to 3,000 HP. Fully compatible with -10 AN line if combined with custom ORB-08/AN-10 adapter P/N 15641. Full size ports at each end for optimal injector supply and minimal hydraulic fluctuation. Additional inlet/outlet ports are provided where required for plumbing convenience. CNC-machined, billet aluminum construction for unequaled fit and finish. Steel mounting brackets, custom engineered for each application, combining a solid, durable mounting platform with correct fit and ‘bolt-on’ ease of installation. Red or Black Type II bright dip anodized finish that looks great and protects against corrosion. This product is not legal for sale or use on emission-controlled vehicles except when used as a direct replacement part matching OEM specifications...
393.20€
Ex Tax:327.67€
P/N 14105: 90-99 Mitsubishi 4G63 Fuel Rail Kit Aeromotive High Flow, Billet Fuel Rails combine 3,000 HP flow capabilities with ‘bolt-on’ ease of installation. Fits 1990-1999 Mitsubishi 4G63 engines – Rails Only ORB-08 Ports with compact connections and positive, leak-free sealing. Full 5/8′ ID through bore, capable of supporting up to 3,000 HP. Fully compatible with -10 AN line if combined with custom ORB-08/AN-10 adapter P/N 15641. Full size ports at each end for optimal injector supply and minimal hydraulic fluctuation. Additional inlet/outlet ports are provided where required for plumbing convenience. CNC-machined, billet aluminum construction for unequaled fit and finish. This product is not legal for sale or use on emission-controlled vehicles except when used as a direct replacement part matching OEM specifications. Steel mounting brackets, custom engineered for each application, combining a solid, durable mounting platform with correct fit and ‘bolt-on’ ease of nstallation. Red, Type II bright dip anodized finish that looks great and protects against corrosion...
370.80€
Ex Tax:309.00€
P/N 14132: 2003-2004 EVO Billet Fuel Rail Kit Aeromotive High Flow, Billet Fuel Rails combine 3,000 HP flow capabilities with bolt-on ease of installation. Fits 2003-2007 Mitsubishi EVO – Rails Only ORB-08 Ports with compact connections and positive, leak-free sealing. Full 5/8 ID through bore, capable of supporting up to 3,000 HP. Fully compatible with -10 AN line if combined with custom ORB-08/AN-10 adapter P/N 15641. Full size ports at each end for optimal injector supply and minimal hydraulic fluctuation. Additional inlet/outlet ports are provided where required for plumbing convenience. CNC-machined, billet aluminum construction for unequaled fit and finish. This product is not legal for sale or use on emission-controlled vehicles except when used as a direct replacement part matching OEM specifications. Steel mounting brackets, custom engineered for each application, combining a solid, durable mounting platform with correct fit and bolt-on ease of installation. Red, Type II bright dip anodized finish that looks great and protects against corrosion...
305.77€
Ex Tax:254.81€
P/N 14136: 04-06 Subaru 2.5L STi Fuel Rail Kit Aeromotive High Flow, Billet Fuel Rails combine 3,000 HP flow capabilities with ‘bolt-on’ ease of installation. Fits 2004-2006 Subaru 2.5L STi – Rails Only Side Feed ORB-08 Ports with compact connections and positive, leak-free sealing. Full 5/8′ ID through bore, capable of supporting up to 3,000 HP. Fully compatible with -10 AN line if combined with custom ORB-08/AN-10 adapter P/N 15641. Full size ports at each end for optimal injector supply and minimal hydraulic fluctuation. Additional inlet/outlet ports are provided where required for plumbing convenience. CNC-machined, billet aluminum construction for unequaled fit and finish. This product is not legal for sale or use on emission-controlled vehicles except when used as a direct replacement part matching OEM specifications. Steel mounting brackets, custom engineered for each application, combining a solid, durable mounting platform with correct fit and ‘bolt-on’ ease of nstallation. Red, Type II bright dip anodized finish that looks great and protects against corrosion...
305.77€
Ex Tax:254.81€
P/N 14134: 04-06 Subaru 2.0L WRX Fuel Rail Kit Aeromotive High Flow, Billet Fuel Rails combine 3,000 HP flow capabilities with ‘bolt-on’ ease of installation. Fits 2004-2006 Subaru 2.0L WRX – Rails Only Top Feed ORB-08 Ports with compact connections and positive, leak-free sealing. Full 5/8′ ID through bore, capable of supporting up to 3,000 HP. Fully compatible with -10 AN line if combined with custom ORB-08/AN-10 adapter P/N 15641. Full size ports at each end for optimal injector supply and minimal hydraulic fluctuation. Additional inlet/outlet ports are provided where required for plumbing convenience. CNC-machined, billet aluminum construction for unequaled fit and finish. This product is not legal for sale or use on emission-controlled vehicles except when used as a direct replacement part matching OEM specifications. Steel mounting brackets, custom engineered for each application, combining a solid, durable mounting platform with correct fit and ‘bolt-on’ ease of nstallation. Red, Type II bright dip anodized finish that looks great and protects against corrosion...
305.77€
Ex Tax:254.81€
P/N 14107: Unmachined Raw Extrusion Fuel Rail Unmachined Raw Extrusion 17 3/4” length5/8” ID6061 T6 Aircraft Grade Billet Aluminum This product is not legal for sale or use on emission-controlled vehicles except when used as a direct replacement part matching OEM specifications...
81.60€
Ex Tax:68.00€
GM LS3/L76 Fuel Rails Black – #14170 Red – #14115 Aeromotive High Flow, Billet Fuel Rails combine 3,000 HP flow capabilities with ‘bolt-on’ ease of installation. Fits GM LS3/L76 – Rails Only ORB-08 Ports with compact connections and positive, leak-free sealing. Full 5/8′ ID through bore, capable of supporting up to 3,000 HP. Fully compatible with -10 AN line if combined with custom ORB-08/AN-10 adapter P/N 15641. Full size ports at each end for optimal injector supply and minimal hydraulic fluctuation. Additional inlet/outlet ports are provided where required for plumbing convenience. CNC-machined, billet aluminum construction for unequaled fit and finish. Steel mounting brackets, custom engineered for each application, combining a solid, durable mounting platform with correct fit and ‘bolt-on’ ease of installation. Red or Black Type II bright dip anodized finish that looks great and protects against corrosion. This product is not legal for sale or use on emission-controlled vehicles except when used as a direct replacement part matching OEM specifications...
393.20€
Ex Tax:327.67€
P/N 14112: 94-01 Acura Integra Fuel Rail Kit Aeromotive High Flow, Billet Fuel Rails combine 3,000 HP flow capabilities with ‘bolt-on’ ease of installation. Fits 1994-2001 Acura Integra – Rails Only ORB-08 Ports with compact connections and positive, leak-free sealing. Full 5/8′ ID through bore, capable of supporting up to 3,000 HP. Fully compatible with -10 AN line if combined with custom ORB-08/AN-10 adapter P/N 15641. Full size ports at each end for optimal injector supply and minimal hydraulic fluctuation. Additional inlet/outlet ports are provided where required for plumbing convenience. CNC-machined, billet aluminum construction for unequaled fit and finish. This product is not legal for sale or use on emission-controlled vehicles except when used as a direct replacement part matching OEM specifications. Steel mounting brackets, custom engineered for each application, combining a solid, durable mounting platform with correct fit and ‘bolt-on’ ease of nstallation. Red, Type II bright dip anodized finish that looks great and protects against corrosion...
305.77€
Ex Tax:254.81€
COMPATIBILITY11-14 Ford Mustang GT15-23 Ford Mustang GT2024+ Ford Mustang GT15-20 Ford Shelby GT35014-16 Ford Falcon FG-XNOTE: Also compatible with the Ford Racing Boss 302 Manifold Appropriate fittings must be selected based on the specific application. Ample space around the fuel rail port(s) is necessary for larger accessories such as fuel pressure regulators, fuel pressure gauges, and fuel pulse dampers. To verify clearance, the dimensional drawings on the product pages can be used as a reference guide. Instruction PDF..
287.80€
Ex Tax:239.84€
20-0761-0X FUEL HANGER PLUMBING KIT, MK5 These plumbing kits include everything required to plumb the fuel system between the Radium fuel pump hanger to a port injection fuel rail. A -8AN 90 degree PuskLok hose end (shown below left) is included for connecting to an -8AN male port injection fuel rail fitting (not included). A -6AN 90 degree PuskLok hose end (below) is included for connecting to an -6AN male aftermarket FPR fitting (not included). A -6AN (3/8") fuel hose runs to the fuel pump hanger return port. The feed and/or return hose can be easily modified for installation of an in-line flex fuel sensor. Furthermore, the hoses run though billet aluminum fuel line retainers. As shown below, a special retainer is provided to prevent the lines from contacting the driveshaft and exhaust when crossing over the tunnel. An -8AN (1/2") feed hose runs from the fuel pump hanger through the provided fuel filter using a specifically designed MK5 Supra bolt-on billet mount as shown below. Depending on the kit selected (-03,-05), the fuel filter will be assembled with a choice of different elements. Go HERE for more filter element information. INCLUDES -Fuel Filter Microglass -8AN Fuel Filter Adapter Fittings -Billet Aluminum MK5 Supra Filter Mount -8AN and 6AN PushLok Hose Ends -8AN Fuel Feed Hose -6AN Fuel Return Hose -Fuel Line Retainers -Stainless Steel Hardware Instruction PDF..
564.88€
Ex Tax:470.73€
A tuning fuel strip for the 2JZ-GTE engine. A perfect copy of the HKSa strip both in terms of construction and design. The kit contains all necessary O-rings, adapters, seals, mounting screws, etc.Listwy paliwowe - Purple..
63.17€
Ex Tax:52.64€
A tuning fuel strip for the 2JZ-GTE engine. A perfect copy of the HKSa strip both in terms of construction and design. The kit contains all necessary O-rings, adapters, seals, mounting screws, etc.Listwy paliwowe - Red..
63.17€
Ex Tax:52.64€
Aeromotive, long known for high-end bulletproof fuel systems, is proud to introduce our new billet aluminum fuel rails for the popular Volkswagen 1.8L Turbo engine. Aeromotive Part # 14163 Fuel Rail, Volkswagen 1.8L Turbo. This product is not legal for sale or use on emission-controlled vehicles except when used as a direct replacement part matching OEM specifications. The Aeromotive Volkswagen 1.8L Turbo Billet Fuel Rails feature 8AN inlet and outlet ports and are designed to be the highest flowing rail on the market. The internal diameter is a full 5/8 and is CNC machined out of 6061 T6 aircraft aluminum alloy. The rail is beautifully finished with type II bright dip red anodize and includes all brackets and hardware to install the rails on a variety of applications that utilize Volkswagens 1.8L Turbo engine. (See Below) Audi S3 1999-2006Audi A3 1996-2005Audi A4 1996-2005Audi TT Mk1 1998-2006VW Passat 1996-2005VW Jetta 2000-2006VW Beetle 1999-2005VW Golf 1997-2006 (Including GTI)VW Golf 1989-1992 (Including Rally)VW Bora 1998-2005VW Polo GTI 2006-2008Seat Ibiza Cupra or FR 1999-2008Seat Leon 1999-2005 (Including Cupra and Cupra R)Seat Cordoba Cupra 1999-2002Seat Exeo 2008-2010Skoda Octavia 1996-2006 (Including RS model)..
291.71€
Ex Tax:243.09€
PORTS AND FITTINGS This fuel rail features three 8AN ORB ports, one in the center and one at each end. O-ring style fittings must be used in these ports. No fittings are included with this fuel rail and must be purchased separately. 8AN ORB Adapter Fittings 8AN ORB Direct Mount Regulators 8AN ORB Fuel Pulse Dampers Fuel Pressure Gauge Adapters Appropriate fittings must be selected based on the specific application. Ample space around the fuel rail port(s) is necessary for larger accessories such as fuel pressure regulators, fuel pressure gauges, and fuel pulse dampers. To verify clearance, the dimensional drawings on the product pages can be used as a reference guide. Compatible with the following BMW engines (M50 / M52 / M52TU / M54 / M56 / S50 / S52) This Radium Engineering fuel rail is CNC machined from extruded 6063 aluminum, black anodized, and laser etched for a high quality surface finish. They are compatible with all fuel types including popular alcohol mixtures such as E85. The fuel rail has three 8AN ORB threaded ports in total. Optionally, Radium FPD-R or FPD-XR fuel pulse dampers fit in the center fuel rail port (as shown below). INCLUDED -Black Anodized Laser Etched Fuel Rail -Mounting Feet for all Compatible Engines -Stainless Steel Mounting Hardware Instruction PDF..
229.27€
Ex Tax:191.06€
DeatschWerks fuel rail for Chevrolet LS2/LS3 with Crossover Manufacturer: DeatschWerks Injections SKU: USA-DW-7-203..
277.00€
Ex Tax:230.83€
DeatschWerks fuel rail for Chevrolet LS2/LS3 Manufacturer: DeatschWerks Injections SKU: USA-DW-7-202..
240.71€
Ex Tax:200.59€
DeatschWerks fuel rail for Chevrolet LSA/LS9 Manufacturer: DeatschWerks Injections SKU: USA-DW-7-204..
434.25€
Ex Tax:361.87€
DeatschWerks fuel rail for Chevrolet LSA/LS9 Manufacturer: DeatschWerks Injections SKU: USA-DW-7-205..
470.53€
Ex Tax:392.11€
DeatschWerks fuel rail for Coyote 5.0 Ford Mustang F-150 Manufacturer: DeatschWerks Injections SKU: USA-DW-7-300..
313.29€
Ex Tax:261.07€
DeatschWerks fuel rails for Ford 4.6 2-Valve with Crossover Manufacturer: DeatschWerks Injections SKU: USA-DW-7-303..
325.38€
Ex Tax:271.15€
DeatschWerks fuel rails for Ford 4.6 2-Valve Manufacturer: DeatschWerks Injections SKU: USA-DW-7-302..
289.09€
Ex Tax:240.91€
DeatschWerks fuel rails for Ford 4.6 3-Valve Manufacturer: DeatschWerks Injections SKU: USA-DW-7-304..
289.09€
Ex Tax:240.91€
DeatschWerks fuel rails for Ford 4.6 3-Valve with Crossover Manufacturer: DeatschWerks Injections SKU: USA-DW-7-305..
325.38€
Ex Tax:271.15€
DeatschWerks Fuel Rail for Honda B-Series Civic Integra Accord CR-V DW-7-402 Manufacturer: DeatschWerks Injections SKU: USA-DW-7-400..
192.33€
Ex Tax:160.27€
2002-2006 Acura RSX Base L4.1998cc 2002-2006 Acura RSX Type-S L4.1998cc 2004-2008 Acura TSX Base L4.2354cc 2002-2011 Honda Civic Si L4.1998cc 2012-2015 Honda Civic Si L4.2354cc..
192.33€
Ex Tax:160.27€
DeatschWerks Fuel Rail for Honda S2000 2000-2005 Manufacturer: DeatschWerks Injections SKU: USA-DW-7-404..
204.42€
Ex Tax:170.35€
DeatschWerks fuel rail LS1/LS6 Manufacturer: DeatschWerks Injections SKU: USA-DW-7-201..
422.15€
Ex Tax:351.79€
DeatschWerks fuel rail LS1/LS6 Manufacturer: DeatschWerks Injections SKU: USA-DW-7-200..
349.57€
Ex Tax:291.31€
DeatschWerks top feed fuel rail Mazda RX7 1993-1995 Manufacturer: DeatschWerks Injections SKU: USA-DW-7-700..
289.09€
Ex Tax:240.91€
DeatschWerks fuel rail Mitsubishi Evo 10 Manufacturer: DeatschWerks Injections SKU: USA-DW-7-500..
216.52€
Ex Tax:180.43€
DeatschWerks fuel rail Mitsubishi Evo 8/9 Manufacturer: DeatschWerks Injections SKU: USA-DW-7-502..
192.33€
Ex Tax:160.27€
2004-2006 Subaru Impreza WRX STI H4.2458cc EJ25 2004-2006 Subaru Legacy GT H4.2458cc EJ25..
240.71€
Ex Tax:200.59€
2002-2005 Subaru Impreza WRX H4.1994cc EJ20/EJ25 2006-2011 Subaru Impreza WRX H4.2458ccEJ20/EJ25 2007-2012 Subaru Impreza WRX STI H4.2458cc EJ25 2009 Subaru Legacy GT spec.B H4.2458cc EJ25 2015-2017 Subaru WRX STI Base H4.2458cc EJ25 2015 Subaru WRX STI Launch Edition H4.2458cc EJ25 2015-2017 Subaru WRX STI Limited H4.2458cc EJ25 2016 Subaru WRX STI Series.HyperBlue H4.2458cc EJ25..
240.71€
Ex Tax:200.59€
DeatschWerks fuel rail Toyota 2JZ-GTE Manufacturer: DeatschWerks Injections SKU: USA-DW-7-600..
240.71€
Ex Tax:200.59€
This kit permits the OEM low pressure fuel feed hose to be connected to the rear of the port injection fuel rail. Installs in under 10 minutes. If using an independent port injection fuel system (see Radium 20-0760 fuel pump hanger), this plumbing kit would not be required. INCLUDED -SAE Quick Connect Tee PTFE Hose Assembly -Preassembled 6AN PTFE Fuel Hose -8AN ORB to 6AN Male Fitting -8AN ORB Plug Instruction PDF..
116.10€
Ex Tax:96.75€
20-0012-01 FUEL RAIL, TOYOTA 2ZZ-GE This option includes the fuel rail and mounting hardware. The OEM fuel pulse damper bracket and associated screws are included as well. No fittings are included. The end ports of this fuel rail are tapped for 8AN ORB. A center port for the factory fuel pulse damper is also included. This high volume fuel rail works on all 2ZZ-GE engines. Both ends of the rail are tapped to 8AN ORB female threads. These ports use positive o-ring seals instead of tapered pipe threads which commonly damage aluminum threads and lead to fuel leaks. The center port accommodates the 2ZZ-GE fuel pulse damper (not included) from the OEM fuel rail. This helps alleviate all high frequency pressure fluctuations. The fuel rail was designed to clear the intercooler mounting boss (Exige-S/2-Eleven only) as best as possible without sacrificing fuel flow. Some grinding may still be necessary. FEATURES -Billet aluminum construction -Anodized surface finish for corrosion resistance -Stealth laser etched logos pre anodizing -End Ports: 3/4-16 Female Thread (-8AN) -Works with factory and aftermarket injectors -Easily converted to a pressure regulated return system -Fits under the factory fuel rail cover -Supercharged Lotus intercooler boss remains functional Instructions PDF..
262.44€
Ex Tax:218.70€
2002-2005 Subaru Impreza WRX H4.1994cc EJ20/EJ25 2006-2011 Subaru Impreza WRX H4.2458ccEJ20/EJ25 2007-2012 Subaru Impreza WRX STI H4.2458cc EJ25 2009 Subaru Legacy GT spec.B H4.2458cc EJ25 2015-2017 Subaru WRX STI Base H4.2458cc EJ25 2015 Subaru WRX STI Launch Edition H4.2458cc EJ25 2015-2017 Subaru WRX STI Limited H4.2458cc EJ25 2016 Subaru WRX STI Series.HyperBlue H4.2458cc EJ25..
748.74€
Ex Tax:623.95€
2004-2006 Subaru Impreza WRX STI H4.2458cc EJ25 2004-2006 Subaru Legacy GT H4.2458cc EJ25..
1,196.29€
Ex Tax:996.91€
2002-2005 Subaru Impreza WRX H4.1994cc EJ20/EJ25 2006-2011 Subaru Impreza WRX H4.2458ccEJ20/EJ25 2007-2012 Subaru Impreza WRX STI H4.2458cc EJ25 2009 Subaru Legacy GT spec.B H4.2458cc EJ25 2015-2017 Subaru WRX STI Base H4.2458cc EJ25 2015 Subaru WRX STI Launch Edition H4.2458cc EJ25 2015-2017 Subaru WRX STI Limited H4.2458cc EJ25 2016 Subaru WRX STI Series.HyperBlue H4.2458cc EJ25..
1,196.29€
Ex Tax:996.91€
2002-2005 Subaru Impreza WRX H4.1994cc EJ20/EJ25 2006-2011 Subaru Impreza WRX H4.2458ccEJ20/EJ25 2007-2012 Subaru Impreza WRX STI H4.2458cc EJ25 2009 Subaru Legacy GT spec.B H4.2458cc EJ25 2015-2017 Subaru WRX STI Base H4.2458cc EJ25 2015 Subaru WRX STI Launch Edition H4.2458cc EJ25 2015-2017 Subaru WRX STI Limited H4.2458cc EJ25 2016 Subaru WRX STI Series.HyperBlue H4.2458cc EJ25..
724.55€
Ex Tax:603.79€
Nuke Performance Additional Injector Holder lets you mount a dual setup of injectors to your intake piping. Used by world record holders within drag racing and is safe for both petrol, methanol and ethanol. Fuel enrichment for all type of fuel lets you get instant additional fuel injection into your intake piping. Adds two extra injectors, when you need more fuel than your ordinary fuel rail can deliver. 100% Methanol / Ethanol Proof Add 2 additional injectors For drag racing and motorsports AN-8 fittings included Made in Sweden Fits 3" intake piping The Nuke Performance Aluminum Additional Injector Holder comes with all the major components needed for installation onto 3" aluminum intake pipe and is safe for all type of fuels, including alcoholic fuels such as methanol and ethanol. Delivered with all needed fittings Delivered with 2x AN-8 (3/4 UNF) to AN-8 male fittings. AN-6 and AN-10 fittings are optional and sold as additional accessories. AN-8 (3/4 UNF) Plug Part # : 700-01-104 AN-8 (3/4 UNF) to AN-6 Male Part # : 700-01-101 AN-8 (3/4 UNF) to AN-8 Male Part # : 700-01-102 AN-8 (3/4 UNF) to AN-10 Male Part # : 700-01-103 Fits 14mm injectors (EV 14L Long) and is often used as additional methanol injection for fuel enrichment in drag racing and other motorsports applications. Aluminum welding flange for 55-degree injector angle Aluminum welding flange made for a safe, stable and easy mount to any 3" aluminum intake piping. With this additional injector assembly, your injectors will be placed in a 55-degree angle to the 3" aluminum tube which can give a substantial increase in fuel by utilizing 2 extra injectors. The 55-degree angle is ideal for fuel injection into the intake piping. This is for use with a standalone fuel enrichment device or as a complement to your Engine Management Systems e.g Haltech, DTAfast, Civinco. The injectors can be integrated or mounted in the intake stream in any Racing engine setup. No injectors are included. Fits EV 14L Long injectors. Developed in Sweden, guaranteeing the highest possible quality The Additional Injector Holder is developed, designed and manufactured by Nuke Performance for the highest possible quality and with the same hallmark as all the other parts in the lightweight motorsports range. There is no substitute for the quality of Nuke Performance! SPECIFICATIONS Technical information : • Aluminum extrusion from 6082-T6. • 3/4 UNF Thread in both ends. • Internal diameter of 17,5 mm which guarantees high and reliable flow. • Nuke Performance injector safety brackets for safe operation. • Delivered with 2x AN-8 fittings. • Stainless steel legs between the flange and fuel rail. • Laserengraved. Measurements : Height : 88 mm Width : 152 mm Depth : 34 mm Weight : 206 g..
175.08€
Ex Tax:145.90€
Nuke Performance Fuel Rail for Audi engines, available for listed engines. Do not forget to choose engine before purchase. Available setups :• Audi 4cyl 1.8t * * Model specific fuel rail, delivered without mounting brackets. The body and all components are CNC-machined from 6082 aluminum alloy. We believe this is the Best Fuel rail on the market with the highest flow capacity. The Injector safety Bracket gives a Tight and Safe operation.The Bracket is Stainless Steel for a long-lasting, corrosion-free appearance. If space is an issue we recommend you to use our Banjo-type fitting, with an oversized internal dimension for minimum cavitation. All the fittings have Viton O-rings for long-lasting operation. If you can´t find the engine you are looking for, please contact us directly, our manufacturing process makes it possible to adapt this product to most engine setups out there. Technical information :• Aluminium extrusion 6082-T6.• Delivered with 2x 3/4 UNF AN-8 fittings and 1x 1/4 G plug.• Stainless injector safety brackets for safe operation.• Anodized finish for long lasting function and corrosion free appearance.• 17,5mm internal diameter which guarantees high and reliable flow.• Laserengraved.Measurements :Height : 36 mmDepth : 33 mm..
178.80€
Ex Tax:149.00€
Nuke Performance Fuel Rail for Audi engines, available for listed engines. Do not forget to choose engine before purchase. Available setups : • Audi 4cyl 1.8t * • Audi 5cyl RS2 / S2 / S4 * * Model specific fuel rail, delivered without mounting brackets. The body and all components are CNC-machined from 6082 aluminum alloy. We believe this is the Best Fuel rail on the market with the highest flow capacity. The Injector safety Bracket gives a Tight and Safe operation. The Bracket is Stainless Steel for a long-lasting, corrosion-free appearance. If space is an issue we recommend you to use our Banjo-type fitting, with an oversized internal dimension for minimum cavitation. All the fittings have Viton O-rings for long-lasting operation. If you can´t find the engine you are looking for, please contact us directly, our manufacturing process makes it possible to adapt this product to most engine setups out there. Technical information : • Aluminium extrusion 6082-T6. • Delivered with 2x 3/4 UNF AN-8 fittings and 1x 1/4 G plug. • Stainless injector safety brackets for safe operation. • Anodized finish for long lasting function and corrosion free appearance. • 17,5mm internal diameter which guarantees high and reliable flow. • Laserengraved. Measurements : Height : 36 mm Depth : 33 mm..
190.80€
Ex Tax:159.00€
Nuke Performance Fuel Rail for BMW engines, available for listed engines. Do not forget to choose the engine before purchase. These fuel rails are model adapted fuel rails, delivered without mounting hardware. Available setups:• BMW 4cyl M10 / S14 *• BMW 4cyl M42 *• BMW 6cyl M30 / S38 *• BMW 8cyl S65 Bolt-On• BMW 8cyl M60 / M62 Bolt-On• BMW MINI 4cyl R53 Bolt-On * Model specific fuel rail, delivered without mounting brackets. The body and all components are CNC-machined from 6082 aluminum alloy. We believe this is the Best Fuel rail on the market with the highest flow capacity. The Injector safety Bracket gives a Tight and Safe operation.The Bracket is Stainless Steel for a long-lasting, corrosion-free appearance. If space is an issue we recommend you to use our Banjo-type fitting, with an oversized internal dimension for minimum cavitation. All the fittings have Viton O-rings for long-lasting operation. If you can´t find the engine you are looking for, please contact us directly, our manufacturing process makes it possible to adapt this product to most engine setups out there. SPECIFICATIONS Technical information :• Aluminium extrusion 6082-T6.• Delivered with 2x 3/4 UNF AN-8 fittings and 1x 1/4 G plug.• Stainless injector safety brackets for safe operation.• Anodized finish for long lasting function and corrosion free appearance.• 17,5mm internal diameter which guarantees high and reliable flow.• Laserengraved.Measurements :Height : 36 mmDepth : 33 mm..
178.80€
Ex Tax:149.00€
Nuke Performance Fuel Rail for BMW engines, available for listed engines. Do not forget to choose the engine before purchase. These fuel rails are model adapted fuel rails, delivered without mounting hardware. Available setups:• BMW 4cyl M10 / S14 *• BMW 4cyl M42 *• BMW 6cyl M30 / S38 *• BMW 8cyl S65 Bolt-On• BMW 8cyl M60 / M62 Bolt-On• BMW MINI 4cyl R53 Bolt-On * Model specific fuel rail, delivered without mounting brackets. The body and all components are CNC-machined from 6082 aluminum alloy. We believe this is the Best Fuel rail on the market with the highest flow capacity. The Injector safety Bracket gives a Tight and Safe operation.The Bracket is Stainless Steel for a long-lasting, corrosion-free appearance. If space is an issue we recommend you to use our Banjo-type fitting, with an oversized internal dimension for minimum cavitation. All the fittings have Viton O-rings for long-lasting operation. If you can´t find the engine you are looking for, please contact us directly, our manufacturing process makes it possible to adapt this product to most engine setups out there. SPECIFICATIONS Technical information :• Aluminium extrusion 6082-T6.• Delivered with 2x 3/4 UNF AN-8 fittings and 1x 1/4 G plug.• Stainless injector safety brackets for safe operation.• Anodized finish for long lasting function and corrosion free appearance.• 17,5mm internal diameter which guarantees high and reliable flow.• Laserengraved.Measurements :Height : 36 mmDepth : 33 mm..
178.80€
Ex Tax:149.00€
Nuke Performance Fuel Rail for BMW engines, available for listed engines. Do not forget to choose the engine before purchase. These fuel rails are model adapted fuel rails, delivered without mounting hardware. Available setups: • BMW 4cyl M10 / S14 * • BMW 4cyl M42 * • BMW 6cyl M20 * • BMW 6cyl M30 / S38 * • BMW 6cyl M50 Bolt-On • BMW 6cyl S50 Bolt-On • BMW 8cyl S65 Bolt-On • BMW 8cyl M60 / M62 Bolt-On • BMW MINI 4cyl R53 Bolt-On * Model specific fuel rail, delivered without mounting brackets. The body and all components are CNC-machined from 6082 aluminum alloy. We believe this is the Best Fuel rail on the market with the highest flow capacity. The Injector safety Bracket gives a Tight and Safe operation. The Bracket is Stainless Steel for a long-lasting, corrosion-free appearance. If space is an issue we recommend you to use our Banjo-type fitting, with an oversized internal dimension for minimum cavitation. All the fittings have Viton O-rings for long-lasting operation. If you can´t find the engine you are looking for, please contact us directly, our manufacturing process makes it possible to adapt this product to most engine setups out there. Technical information : • Aluminium extrusion 6082-T6. • Delivered with 2x 3/4 UNF AN-8 fittings and 1x 1/4 G plug. • Stainless injector safety brackets for safe operation. • Anodized finish for long lasting function and corrosion free appearance. • 17,5mm internal diameter which guarantees high and reliable flow. • Laserengraved. Measurements : Height : 36 mm Depth : 33 mm..
195.60€
Ex Tax:163.00€
Nuke Performance Fuel Rail for BMW engines, available for listed engines. Do not forget to choose the engine before purchase. These fuel rails are model adapted fuel rails, delivered without mounting hardware. Available setups:• BMW 4cyl M10 / S14 *• BMW 4cyl M42 *• BMW 6cyl M30 / S38 *• BMW 8cyl S65 Bolt-On• BMW 8cyl M60 / M62 Bolt-On• BMW MINI 4cyl R53 Bolt-On * Model specific fuel rail, delivered without mounting brackets. The body and all components are CNC-machined from 6082 aluminum alloy. We believe this is the Best Fuel rail on the market with the highest flow capacity. The Injector safety Bracket gives a Tight and Safe operation.The Bracket is Stainless Steel for a long-lasting, corrosion-free appearance. If space is an issue we recommend you to use our Banjo-type fitting, with an oversized internal dimension for minimum cavitation. All the fittings have Viton O-rings for long-lasting operation. If you can´t find the engine you are looking for, please contact us directly, our manufacturing process makes it possible to adapt this product to most engine setups out there. SPECIFICATIONS Technical information :• Aluminium extrusion 6082-T6.• Delivered with 2x 3/4 UNF AN-8 fittings and 1x 1/4 G plug.• Stainless injector safety brackets for safe operation.• Anodized finish for long lasting function and corrosion free appearance.• 17,5mm internal diameter which guarantees high and reliable flow.• Laserengraved.Measurements :Height : 36 mmDepth : 33 mm..
195.60€
Ex Tax:163.00€
Nuke Performance BMW M50 high-performance, lightweight fuel rail BMW 6cyl M50 high-performance bolt-on Fuel Rail kit for the popular 6cyl BMW M50 engine. Lightweight fuel rail with unique injector safety clips that fit straight on the intake without heavy modifications. 100% safe for alcoholic fuels such as ethanol. Lightweight aluminum fuel rail Unique injector safety clips Bolt-on brackets included Made in Sweden 100% E85 Proof Delivered with AN-8 fittings Bolt-on fitment, everything is included for : • BMW 6cyl M50 Give your engine over-dimensioned fuel flow for serious power outtake and the looks that are the Nuke Performance signum. Designed to look awesome and perform even better, this motorsports-grade fuel rail is the market-leading BMW M50 fuel rail with the most functionality and delivered with unique injector safety clips and bolt-on brackets for a safe and easy mount to this popular 6cyl engines from BMW. Delivered with AN-8 fittings and bolt-on brackets Co-developed with worldwide BMW specialists, this fuel rail is set to perform under all conditions and for any horsepower requirement. This is the best fuel rail on the market for the M50 BMW engine with the highest flow capacity. Delivered with 2x 3/4 UNF to AN-8 Male fittings. AN-6 and AN-10 fittings are optional and sold as additional accessories. 3/4 UNF to AN-6 Male Part # : 700-01-101 3/4 UNF to AN-8 Male Part # : 700-01-102 3/4 UNF to AN-10 Male Part # : 700-01-103 For applications where space is an issue, we also have a range of banjo fittings that saves a lot of space. AN-6, AN-8 and AN-10 banjo fittings are optional and sold as additional accessories. 3/4 UNF Banjo to AN-6 Male Part # : 700-03-101 3/4 UNF Banjo to AN-8 Male Part # : 700-03-102 3/4 UNF Banjo to AN-10 Male Part # : 700-03-103 Made in Sweden, guaranteeing the highest possible quality The BMW M50 engine fuel rail is developed, designed and manufactured by Nuke Performance for the highest possible quality and with the same hallmark as all the other parts in the lightweight motorsports range. There is no substitute for the quality of Nuke Performance! Article replaces Part # : 100-02-202 + 99-02-102 SPECIFICATIONS Technical information : • Machined aluminium extrusion 6082-T6. • Delivered with 2x 3/4 UNF AN-8 Male fittings, 1x 1/4 BSPP plug. • 100% safe for alcoholic fuels such as E85. • Stainless injector safety clips for safe seal operation. • Anodized finish for long lasting function and corrosion free appearance. • 17.5mm internal diameter which guarantees high and reliable flow. Measurements : * Length : 499 mm (19.64") Height : 36 mm (1.41") Depth : 33 mm (1.29") *All weights and measurements are excluding fittings...
226.80€
Ex Tax:189.00€
Nuke Performance BMW S50 high-performance, lightweight fuel rail BMW 6cyl S50 high-performance bolt-on Fuel Rail kit for the popular 6cyl BMW S50 engine. Lightweight fuel rail with unique injector safety clips that fit straight on the intake without heavy modifications. 100% safe for alcoholic fuels such as ethanol. Lightweight aluminum fuel rail Unique injector safety clips Bolt-on brackets included Made in Sweden 100% E85 Proof Delivered with AN-8 fittings Bolt-on fitment, everything is included for : • BMW 6cyl S50 Give your engine over-dimensioned fuel flow for serious power outtake and the looks that are the Nuke Performance signum. Designed to look awesome and perform even better, this motorsports-grade fuel rail is the market-leading BMW S50 fuel rail with the most functionality and delivered with unique injector safety clips and bolt-on brackets for a safe and easy mount to this popular 6cyl engines from BMW. Delivered with AN-8 fittings and bolt-on brackets Co-developed with worldwide BMW specialists, this fuel rail is set to perform under all conditions and for any horsepower requirement. This is the best fuel rail on the market for the S50 BMW engine with the highest flow capacity. Delivered with 2x 3/4 UNF to AN-8 Male fittings. AN-6 and AN-10 fittings are optional and sold as additional accessories. 3/4 UNF to AN-6 Male Part # : 700-01-101 3/4 UNF to AN-8 Male Part # : 700-01-102 3/4 UNF to AN-10 Male Part # : 700-01-103 For applications where space is an issue, we also have a range of banjo fittings that saves a lot of space. AN-6, AN-8 and AN-10 banjo fittings are optional and sold as additional accessories. 3/4 UNF Banjo to AN-6 Male Part # : 700-03-101 3/4 UNF Banjo to AN-8 Male Part # : 700-03-102 3/4 UNF Banjo to AN-10 Male Part # : 700-03-103 Made in Sweden, guaranteeing the highest possible quality The BMW S50 engine fuel rail is developed, designed and manufactured by Nuke Performance for the highest possible quality and with the same hallmark as all the other parts in the lightweight motorsports range. There is no substitute for the quality of Nuke Performance! Article replaces Part # : 100-02-202 + 99-02-106 SPECIFICATIONS Technical information : • Machined aluminium extrusion 6082-T6. • Delivered with 2x 3/4 UNF AN-8 Male fittings, 1x 1/4 BSPP plug. • 100% safe for alcoholic fuels such as E85. • Stainless injector safety clips for safe seal operation. • Anodized finish for long lasting function and corrosion free appearance. • 17.5mm internal diameter which guarantees high and reliable flow. Measurements : * Length : 499 mm (19.64") Height : 36 mm (1.41") Depth : 33 mm (1.29") Weight : 612 g (21.58oz) * All weights and measurements are excluding fittings...
226.80€
Ex Tax:189.00€
Nuke Performance BMW Fuel Rail 6cyl S65 Bolt-On Manufacturer: Nuke Performance SKU: NP-100-02-213..
242.40€
Ex Tax:202.00€
Nuke Performance Fuel Rail for BMW engines, available for listed engines. Do not forget to choose the engine before purchase. These fuel rails are model adapted fuel rails, delivered without mounting hardware. Available setups: • BMW 4cyl M10 / S14 * • BMW 4cyl M42 * • BMW 6cyl M20 * • BMW 6cyl M30 / S38 * • BMW 6cyl M50 Bolt-On • BMW 6cyl S50 Bolt-On • BMW 8cyl S65 Bolt-On • BMW 8cyl M60 / M62 Bolt-On • BMW MINI 4cyl R53 Bolt-On * Model specific fuel rail, delivered without mounting brackets. The body and all components are CNC-machined from 6082 aluminum alloy. We believe this is the Best Fuel rail on the market with the highest flow capacity. The Injector safety Bracket gives a Tight and Safe operation. The Bracket is Stainless Steel for a long-lasting, corrosion-free appearance. If space is an issue we recommend you to use our Banjo-type fitting, with an oversized internal dimension for minimum cavitation. All the fittings have Viton O-rings for long-lasting operation. If you can´t find the engine you are looking for, please contact us directly, our manufacturing process makes it possible to adapt this product to most engine setups out there. Technical information : • Aluminium extrusion 6082-T6. • Delivered with 2x 3/4 UNF AN-8 fittings and 1x 1/4 G plug. • Stainless injector safety brackets for safe operation. • Anodized finish for long lasting function and corrosion free appearance. • 17,5mm internal diameter which guarantees high and reliable flow. • Laserengraved. Measurements : Height : 36 mm Depth : 33 mm..
288.00€
Ex Tax:240.00€
Nuke Performance BMW M60/M62 high-performance, lightweight fuel railBMW 8cyl V8 M60, M62 high-performance bolt-on Fuel Rail kit for the popular 8cyl BMW V8 M60 / M62 engines. Lightweight fuel rail with unique injector safety clips that fit straight on the intake without heavy modifications. 100% safe for alcoholic fuels such as ethanol. Lightweight aluminum fuel rail Unique injector safety clips Bolt-on brackets included Made in Sweden 100% E85 Proof Delivered with AN-8 fittings Bolt-on fitment, everything is included for :• BMW 8cyl M60 / M62 V8 Give your engine over-dimensioned fuel flow for serious power outtake and the looks that are the Nuke Performance signum. Designed to look awesome and perform even better, this motorsports-grade fuel rail is the market-leading BMW V8 fuel rail with the most functionality and delivered with unique injector safety clips and bolt-on brackets for a safe and easy mount to these popular V8 engines from BMW. Delivered with AN-8 fittings and bolt-on bracketsCo-developed with worldwide BMW specialists, these fuel rails is set to perform under all conditions and for any horsepower requirement. This is the best fuel rail on the market for the M60 and M62 BMW engines with the highest flow capacity. Delivered with 4x 3/4 UNF to AN-8 Male fittings. AN-6 and AN-10 fittings are optional and sold as additional accessories.3/4 UNF to AN-6 Male Part # : 700-01-1013/4 UNF to AN-8 Male Part # : 700-01-1023/4 UNF to AN-10 Male Part # : 700-01-103 For applications where space is an issue, we also have a range of banjo fittings that saves a lot of space. AN-6, AN-8 and AN-10 banjo fittings are optional and sold as additional accessories.3/4 UNF Banjo to AN-6 Male Part # : 700-03-1013/4 UNF Banjo to AN-8 Male Part # : 700-03-1023/4 UNF Banjo to AN-10 Male Part # : 700-03-103 Made in Sweden, guaranteeing the highest possible qualityThe BMW M60, M62 engine fuel rails is developed, designed and manufactured by Nuke Performance for the highest possible quality and with the same hallmark as all the other parts in the lightweight motorsports range. There is no substitute for the quality of Nuke Performance! Technical information :• Machined aluminium extrusion 6082-T6.• Delivered with 4x 3/4 UNF AN-8 Male fittings, 2x 1/4 BSPP plug.• 100% safe for alcoholic fuels such as E85.• Stainless injector safety clips for safe seal operation.• Anodized finish for long lasting function and corrosion free appearance.• 17.5mm internal diameter which guarantees high and reliable flow.Measurements : *Length : 338 mm (13.30")Height : 36 mm (1.41")Depth : 33 mm (1.29")Weight : 444 g (15.66oz)..
354.00€
Ex Tax:295.00€
Nuke Performance BMW S65 Motorsports High-Performance Fuel Rail BMW 8cyl high-performance bolt-on Motorsports Fuel Rail kit for the popular V8 engine S65. Motorsports, lightweight fuel rail with unique injector safety clips that fit straight on the intake without heavy modifications. 100% safe for alcoholic fuels such as ethanol. Lightweight motorsports fuel rail Unique injector safety clips Made in Sweden 100% E85 Proof Delivered with AN-8 fittings Bolt-on fitment, everything is included for : • BMW S65 Give your engine over-dimensioned fuel flow for serious power outtake and the looks that are the Nuke Performance signum. Designed to look awesome and perform even better, this motorsports-grade fuel rail is the market-leading BMW S65 fuel rail with the most functionality and delivered with unique injector safety clips and bolt-on brackets for a safe and easy mount to this popular V8 engines from BMW. This is the new motorsports range of fuel rails from Nuke Performance, their lightest fuel rails ever with a new line of fittings, banjos and injector safety clips. Developed with high demands from motorsport Co-developed with worldwide motorsports teams, this fuel rail is set to perform under all conditions and for any horsepower requirement. This is the best fuel rail on the market for the BMW S65 engines with the highest flow capacity. Delivered with 2x 3/8-NPT AN-8 and 2x 3/8-NPT AN-8 banjo fittings that need no ordinary o-rings. AN-6 and AN-10 fittings are optional and sold as additional accessories. Injector Safety Clips ensures sealing and safety A Nuke Performance unique feature is the injector safety clips that ensure the injectors maintain a perfect sealing even during extreme fuel pressure usage. Whether during assembly, install on the engine or in the unfortunate case of an accident, the injectors will remain solidly on the rail. No fuel is spilled even if the fuel pump continues to run or there is latent pressure in the fuel system. Lightweight bolt-on brackets, everything you need is included Bolt-on lightweight aluminum brackets are included with the kit, designed to work perfectly with the BMW S65 intake, ensuring compatibility with the S65 engine. The necessary fittings are included within the kit such as the unique lightweight banjo fittings that sits back against the firewall, we ensure that everything you need is included within the kit, add injectors of choice and you are ready to go. This newly developed fuel rail design with NPT threaded ends is up to 40% lighter than other more common fuel rail designs, saved weight equals real motorsports performance. Bolt-on solutions including the needed fittings and brackets This kit comes with all needed fittings and brackets for an AN-8 fuel system. We included our newly developed 3/8-NPT threaded banjo fittings to be able to mount these motorsports fuel rails against the firewall where space often can be an issue. The fuel rails come with lightweight aluminum brackets that guarantee a perfect fit against the S65 intake and preventing any leaks and fuel pressure malfunctions. Make sure to use PTFE thread seal for all NPT fittings. Made in Sweden, guaranteeing the highest possible quality Developed, designed and manufactured in Sweden, inhouse by Nuke Performance. This is of the highest possible quality and with the same hallmark as all the other range of the lightweight motorsports range from Nuke Performance. This guaranteeing the highest possible quality - there is no substitute for the quality of Nuke Performance. LS Fuel rail kit includes: 2 x BMW S65 fuel rails, fit each side 2 x 3/8 NPT to AN-8 Male fittings for front inlet 2 x 3/8 NPT to AN-8 banjo fittings for rear outlet 2 x 1/4 BSPP Plug for middle outlet ports 4 x M6*10mm for mounting brackets 16 x M4*6mm for safety clips 8 x Stainless steel injector safety clips 4 x Aluminium mounting brackets SPECIFICATIONS Technical information : • Machined aluminium extrusion 6082-T6. • Delivered with 2x 3/8 NPT AN-8 fittings, 2x 1/4 BSPP plugs and 2x 3/8 NPT AN-8 banjo fittings. • 100% safe for alcoholic fuels such as E85. • Extremely lightweight design for motorsports use, more then 40% lightes then our ordinary fuel rails. • Stainless injector safety clips for safe seal operation. • Billet bolt-on brackets for BMW S65 engine included with the kit. • Anodized finish for long lasting function and corrosion free appearance. • Laserengraved and proudly branded with the Swedish flag. Measurements : * Length : 353 mm Height : 28 mm Depth : 20 mm Weight : 186 g * All weights and measurements are excluding fittings...
342.00€
Ex Tax:285.00€
Nuke Performance MINI R53 FMIC Motorsports High-Performance Fuel RailBMW Mini R53 4cyl FMIC engine high-performance bolt-on Motorsports Fuel Rail kit, the optimal solution for E85. Motorsports, lightweight fuel rail with unique injector safety clips that fit straight on the intake without any heavy modifications. 100% safe for alcoholic fuels such as ethanol, E85. Lightweight motorsports fuel rail Unique injector safety clips Aluminum brackets included for FMIC Made in Sweden 100% E85 Proof Delivered with AN-8 fittings Included brackets for :• Mini R53 FMIC * * will only work on FMIC, if you run a TMIC setup this fuel rail is not useable. Made for the type of injectors :• Bosch EV 14 Standard One of the most overseen engines to tune could be the BMW / Mini R53 engine. But still, there is a growing market, turning small cars into lightweight track day rides. An easy way to make it possible to tune the R53 engine is to convert it to E85 from petrol and in order to do this, you need an ethanol-safe fuel system. Give your engine over-dimensioned fuel flow for serious power outtake and the looks that are the Nuke Performance signum. Designed to look awesome and perform even better, this motorsports-grade fuel rail is the market-leading Mini R53 fuel rail with the most functionality and is delivered with unique injector safety clips and bolt-on brackets for a safe and easy mount to this popular 4cyl engine from BMW Mini. This is the new motorsports range of fuel rails from Nuke Performance, their lightest fuel rails ever with a new line of fittings and injector safety clips. Developed with high demands from motorsportCo-developed with worldwide motorsports teams, this fuel rail is set to perform under all conditions and for any horsepower requirement. This is the best fuel rail on the market for the R53 Mini engine with the highest flow capacity.Delivered with 2x 3/8" NPT to AN-8 Male fittings. AN-6 and AN-10 fittings are optional and sold as additional accessories.3/8 NPT to AN-6 Male Part # : 700-05-1013/8 NPT to AN-8 Male Part # : 700-05-1023/8 NPT to AN-10 Male Part # : 700-05-103 Injector Safety Clips ensure sealing and safetyA Nuke Performance unique feature is the injector safety clips that ensure the injectors maintain a perfect sealing even during extreme fuel pressure usage. Whether during assembly, installation on the engine or in the unfortunate case of an accident, the injectors will remain solidly to the fuel rail. No fuel is spilled even if the fuel pump continues to run or there is latent pressure in the fuel system. And when running high fuel pressure, the risk of the fuel rail rising from the injector disappears and you do not have to worry about engine fires due to unwanted fuel spray. Bolt-on solution including the needed fittings and bracketsThis Mini R53 FMIC flex-fuel fuel rail kit comes with all the needed fittings and brackets for an AN-8 fuel system. The kit comes with 2x 3/8" NPT to AN-8 Male fittings and sturdy lightweight aluminum brackets that guarantee a perfect fit against the Mini R53 engine intake and prevent any leaks and fuel pressure malfunctions. Make sure to use PTFE thread seal for all NPT fittings. Made in Sweden, guarantees the highest possible qualityThe Mini R53 FMIC engine motorsports fuel rail is developed, designed, and manufactured by Nuke Performance for the highest possible quality and with the same hallmark as all the other parts in the lightweight motorsports range. There is no substitute for the quality of Nuke Performance! BMW Mini R53 FMIC Engine Motorsports Fuel Rail includes :1 x Motorsports Fuel Rail, 4cyl2 x Aluminum lightweight brackets2 x Stainless steel M6*8mm for brackets2 x 3/8 NPT to AN-8 Male fitting1 x 1/4 BSPP plug4 x Injector safety clips8 x Stainless steel M4*6mm for safety clips 4 x Injector extensions4 x Original injector clips2 x MC6S M8x20 stainless steel bolts Technical information :• Machined aluminium extrusion 6082-T6.• Delivered with 2x 3/8 NPT AN-8 fittings, 1x 1/4 BSPP plug.• 100% safe for alcoholic fuels such as E85.• Extremely lightweight design for motorsports use, more then 40% lightes then our ordinary fuel rails.• Stainless injector safety clips for safe seal operation.• Billet bolt-on brackets for Mini R53 included with the kit.• Anodized finish for long lasting function and corrosion free appearance.• Laserengraved and proudly branded with the Swedish flag.Measurements : *Length : N/A mmHeight : 28 mmDepth : 20 mmWeight : N/A g* All weights and measurements are excluding fittings...
226.80€
Ex Tax:189.00€
Nuke Performance Fuel Rail for Ford engines, available for listed engines. Uses AN-8 (3/4 UNF) threads and is delivered with 2x AN-8 to AN-8 Male fittings. This is a fuel rail from the first generation fuel rail from Nuke Performance. Delivered without mounting brackets, so custom fabrication is needed. As the Barra engine is popular to use with custom intakes this fuel rail is the perfect choice that let you adapt the fuel rail to your needs. Available setups: • Ford Barra BA / BF 6cyl * * Model specific fuel rail delivered without mounting brackets. One of the most popular engines to tune right now is the Ford Barra and now we have a new Ford Barra BA / BF fuel rail. This is not a bolt-on solution but is perfect for custom intake build. Equipped with threaded holes to make it easy to make custom brackets together with the intake. Uses the correct cc between injectors. The body and all components are CNC-machined from 6082 aluminum alloy. We believe this is the Best Fuel rail on the market with the highest flow capacity. The Injector safety Bracket gives a Tight and Safe operation.The Bracket is Stainless Steel for a long-lasting, corrosion-free appearance. If space is an issue we recommend you to use our Banjo-type fitting, with an oversized internal dimension for minimum cavitation. All the fittings have Viton O-rings for long-lasting operation. If you can´t find the engine you are looking for, please contact us directly, our manufacturing process makes it possible to adapt this product to most engine setups out there. Technical information :• Aluminium extrusion 6082-T6.• Delivered with 2x 3/4 UNF AN-8 fittings and 1x 1/4 G plug.• Stainless injector safety brackets for safe operation.• Anodized finish for long lasting function and corrosion free appearance.• 17,5mm internal diameter which guarantees high and reliable flow.• Laserengraved.Measurements :Height : 36 mmDepth : 33 mm..
195.60€
Ex Tax:163.00€
Nuke Performance Ford V8 Coyote high-performance, lightweight fuel rail Ford 8cyl Coyote high-performance bolt-on Fuel Rail kit for the popular V8 Ford Coyote engine. Lightweight fuel rail with unique injector safety clips that fit straight on the intake without heavy modifications. 100% safe for alcoholic fuels such as ethanol. Lightweight aluminum fuel rail Unique injector safety clips Bolt-on brackets included Made in Sweden 100% E85 Proof Delivered with AN-8 fittings Bolt-on fitment, everything is included for : • Ford V8 Coyote Give your engine over-dimensioned fuel flow for serious power outtake and the looks that are the Nuke Performance signum. Designed to look awesome and perform even better, this motorsports-grade fuel rail is the market-leading Ford Coyote V8 fuel rail with the most functionality and delivered with unique injector safety clips and bolt-on brackets for a safe and easy mount to this popular 8cyl engines from Ford. Delivered with AN-8 fittings and bolt-on brackets Co-developed with worldwide Ford specialists, this fuel rail is set to perform under all conditions and for any horsepower requirement. This is the best fuel rail on the market for the Ford V8 Coyote engine with the highest flow capacity. Delivered with 4x AN-8 (3/4 UNF) to AN-8 Male fittings. AN-6 and AN-10 fittings are optional and sold as additional accessories. AN-8 (3/4 UNF) to AN-6 Male Part # : 700-01-101 AN-8 (3/4 UNF) to AN-8 Male Part # : 700-01-102 AN-8 (3/4 UNF) to AN-10 Male Part # : 700-01-103 For applications where space is an issue, we also have a range of banjo fittings that saves a lot of space. AN-6, AN-8 and AN-10 banjo fittings are optional and sold as additional accessories. AN-8 (3/4 UNF) Banjo to AN-6 Male Part # : 700-03-101 AN-8 (3/4 UNF) Banjo to AN-8 Male Part # : 700-03-102 AN-8 (3/4 UNF) Banjo to AN-10 Male Part # : 700-03-103 Made in Sweden, guaranteeing the highest possible quality The Ford Coyote V8 engine fuel rail is developed, designed, and manufactured by Nuke Performance for the highest possible quality and with the same hallmark as all the other parts in the lightweight motorsports range. There is no substitute for the quality of Nuke Performance!..
334.80€
Ex Tax:279.00€
Fuel Rail spare brackets for Bolt On mounting on selected engine models. These brackets are available together with fuel rails and are not needed to be ordered seperatly but if you have one of Nuke Performance fuel rails and do not have the bolt on kit - here you can order the fuel rail bolt on brackets on their own. Available setups:• BMW 8cyl M60 / M62 1992-1995• Mitsubishi Evo 8• SAAB 4cyl 900• SAAB 4cyl 9000• SAAB 4cyl 9-3• Toyota Supra MK4 6cyl with adapters for Bosch injectors (non VVTi)• Toyota 1JZ 6cyl Bosch Injectors• Volvo 4cyl Red Engine 8v / 16v..
34.80€
Ex Tax:29.00€
Nuke Performance Chevrolet L36 II / 3800 II High-Performance Fuel Rail GM / Chevrolet / Buick high-performance bolt-on Fuel Rail kit for 3800 series 2 and L36 series 2 V6 engines. Motorsports fuel rail with unique injector safety clips. 100% safe for alcoholic fuels such as ethanol and fits directly to the intake thanks to the included bolt-on mounting brackets. Lightweight motorsports fuel rail Unique injector safety clips Made in Sweden 100% E85 Proof Delivered with AN-8 fittings Bolt-on fitment, everything is included for : • GM 3800 Series II • GM L36 Series II Kit made for the type of injectors : • Bosch EV14 L Give your engine over-dimensioned fuel flow for serious power outtake and the looks that are the Nuke Performance signum. Designed to look awesome and perform even better, this motorsports-grade fuel rail is the market-leading fuel rail with the most functionality and delivered with unique injector safety clips and bolt-on brackets for a safe and easy mount to any of the listed GM engine models. Developed with high demands from motorsport Co-developed with worldwide motorsports teams, this fuel rail is set to perform under all conditions and for any horsepower requirement. This is the best 3/4" UNF fuel rail on the market for the 3800-2 / L36-2 engines with the highest flow capacity. Delivered with AN-8 fittings with alcoholic-fuel safe Viton o-rings. AN-6 and AN-10 fittings are optional. Injector Safety Clips ensures sealing and safety A Nuke Performance unique feature is the injector safety clips that ensure the injectors maintain a perfect sealing even during extreme fuel pressure usage. Whether during assembly, install on the engine or in the unfortunate case of an accident, the injectors will remain solidly on the rail. No fuel is spilled even if the fuel pump continues to run or there is latent pressure in the fuel system. Stainless Steel bolt-on brackets, everything you need is included Bolt-on lightweight stainless steel brackets are included with the kit, designed to fit straight to the inlet, ensuring compatibility and perfect fitment to the 3800 Series II, L36 Series II. We ensure that everything you need is included within the kit, add injectors of choice and you are ready to go. All needed fittings for the narrow installation is included There is close to no space available for fittings when running an aftermarket fuel rail on the 3800 / L36 engines. We have made a solution with the smaller 1/4 BSPP AN-6 fittings on the bottom side of the fuel rail. This makes you able to choose between running AN-8 line into the fuel rail and AN-6 out, or running AN-8 in, then AN-6 between the fuel rails as a bridge and then AN-8 out of the second fuel rail. Thanks to the over-dimensioned internal diameters of the fuel rails and the included fittings this guarantees for perfect and sufficiently high fuel flow for even the highest power usage. Made in Sweden, guaranteeing the highest possible quality Developed, designed and manufactured in Sweden, inhouse by Nuke Performance. This is of the highest possible quality and with the same hallmark as all the other range of the lightweight motorsports range from Nuke Performance. This guaranteeing the highest possible quality - there is no substitute for the quality of Nuke Performance. Fuel rail kit includes: 8 x M6*8mm for mounting brackets 12 x M4*6mm for safety clips 2 x 1/4 BSPP AN-6 fittings for middle outlet ports 2 x 3/4 UNF AN-8 fittings for inlets / outlets 2 x 3/4 UNF Plug for end outlet ports 2 x 1/4 BSPP Folded copper washer 4 x 3/4 Viton o-ring, safe for ethanol and petrol use 6 x Stainless steel injector safety clips 4 x Stainless steel mounting brackets SPECIFICATIONS Technical information : • Machined aluminium extrusion 6082-T6. • Delivered with 2x 3/4 UNF AN-8 fittings, 2x 1/4 BSPP AN-6 fittings and 2x 3/4 UNF Plugs. • 100% safe for alcoholic fuels such as E85. • Extremely lightweight design for motorsports use. • Stainless injector safety clips for safe seal operation. • Stainless steel mounting brackets included with the kit. • Anodized finish for long lasting function and corrosion free appearance. • 17,5mm internal diameter which guarantees high and reliable flow. • Laserengraved and proudly branded with the Swedish flag. Measurements : Height : 36 mm Depth : 33 mm..
334.80€
Ex Tax:279.00€
Nuke Performance Chevrolet LS High-Performance Fuel Rail GM / Chevrolet "LS" high-performance bolt-on Fuel Rail kit for LS1, LS2, LS3, LS6, L76, L99. Motorsports fuel rail with unique injector safety clips that fits both common intake styles. 100% safe for alcoholic fuels such as ethanol. Lightweight motorsports fuel rail Unique injector safety clips Made in Sweden 100% E85 Proof Delivered with AN-8 fittings Bolt-on fitment, everything is included for : • GM LS1 • GM LS2 • GM LS3 • GM LS6 • GM L76 • GM L99 Give your engine over-dimensioned fuel flow for serious power outtake and the looks that are the Nuke Performance signum. Designed to look awesome and perform even better, this motorsports-grade fuel rail is the market-leading Chevrolet LS fuel rail with the most functionality and delivered with unique injector safety clips and bolt-on brackets for a safe and easy mount to any of the listed LS engine models. Developed with high demands from motorsport Co-developed with worldwide motorsports teams, this fuel rail is set to perform under all conditions and for any horsepower requirement. This is the best 3/4" UNF fuel rail on the market for the LS engines with the highest flow capacity. Delivered with AN-8 fittings with alcoholic-fuel safe Viton o-rings. AN-6 and AN-10 fittings is optional. Injector Safety Clips ensures sealing and safety A Nuke Performance unique feature is the injector safety clips that ensure the injectors maintain a perfect sealing even during extreme fuel pressure usage. Whether during assembly, install on the engine or in the unfortunate case of an accident, the injectors will remain solidly on the rail. No fuel is spilled even if the fuel pump continues to run or there is latent pressure in the fuel system. Lightweight bolt-on brackets, everything you need is included Bolt-on lightweight aluminum brackets are included with the kit, designed to work with both common LS intake heights and styles, ensuring compatibility across the entire range of LS engines. Assembly instructions are delivered with the kit, we ensure that everything you need is included within the kit, add injectors of choice and you are ready to go. Made in Sweden, guaranteeing the highest possible quality Developed, designed and manufactured in Sweden, inhouse by Nuke Performance. This is of the highest possible quality and with the same hallmark as all the other range of the lightweight motorsports range from Nuke Performance. This guaranteeing the highest possible quality - there is no substitute for the quality of Nuke Performance. Optional AN-8 braided fuel hose cross over plumbing kit If wanted, choose the cross over plumbing kit that makes a true bolt-on solution for installation for the LS engine range. Comes with 2x AN-8 90° hose ends with an E85 proof braided fuel hose. A lightweight and convenient option for fast and secure installation. Partno: 100-07-204 LS Fuel rail kit includes: 4 x 3/4 UNF AN-8 fittings for inlets / outlets 4 x Viton o-ring, safe for ethanol and petrol use 2 x 1/4 BSPP Plug for middle outlet ports 8 x M6*12mm for LS1 type mounting 8 x M6*8mm for LS3 type mounting 16 x M4*6mm for safety clips 8 x Stainless steel injector safety clips 4 x Aluminium mounting brackets 4 x Aluminium distance brackets SPECIFICATIONS Fits injectors : • LS1 type fuel rail : Bosch EV 14 L • LS3 type fuel rail : Bosch EV 14 K Compact Technical information : • Machined aluminium extrusion 6082-T6. • Delivered with 4x 3/4 UNF AN-8 fittings and 2x 1/4 BSPP plug. • 100% safe for alcoholic fuels such as E85. • Extremely lightweight design for motorsports use. • Stainless injector safety clips for safe seal operation. • Billet bolt-on brackets for listed LS engine range included with the kit. • Anodized finish for long lasting function and corrosion free appearance. • 17,5mm internal diameter which guarantees high and reliable flow. • Laserengraved and proudly branded with the Swedish flag. Measurements : Height : 36 mm Depth : 33 mm Download installation instructions (.pdf)..
334.80€
Ex Tax:279.00€
Nuke Performance LS engine fuel rail front hose kitOptional AN-8 braided fuel hose cross over - plumbing kit for the LS engines.Made to work with the Nuke Performance LS fuel rail, Partno: 100-07-203. 100% safe for alcoholic fuels such as ethanol and made for demanding motorsports usage. If wanted we provide this easy setup for a front mount hose kit / plumbing kit that makes a true bolt-on solution for installation for the LS engine range. Comes with 2x AN-8 90° hose ends with an E85 proof braided fuel hose. A lightweight and convenient option for fast and secure installation. Quantity: 1 kit..
94.80€
Ex Tax:79.00€
Nuke Performance Honda DOHC i-VTEC K Engine Motorsports High-Performance Fuel Rail Honda K series engine 4cyl high-performance bolt-on Motorsports Fuel Rail kit for all DOHC i-VTEC K-Series engines (K20, K24). Motorsports, lightweight fuel rail with unique injector safety clips that fit straight on the intake without heavy modifications. 100% safe for alcoholic fuels such as ethanol, E85. Lightweight motorsports fuel rail Unique injector safety clips Made in Sweden 100% E85 Proof Delivered with AN-8 fittings Bolt-on fitment, everything is included for : • Honda K Engine K20 / Honda K Engine K24 Give your engine over-dimensioned fuel flow for serious power outtake and the looks that are the Nuke Performance signum. Designed to look awesome and perform even better, this motorsports-grade fuel rail is the market-leading Honda K-series fuel rail with the most functionality and delivered with unique injector safety clips and bolt-on brackets for a safe and easy mount to this popular 4cyl engines from Honda. This is the new motorsports range of fuel rails from Nuke Performance, their lightest fuel rails ever with a new line of fittings and injector safety clips. Developed with high demands from motorsport Co-developed with worldwide motorsports teams, this fuel rail is set to perform under all conditions and for any horsepower requirement. This is the best fuel rail on the market for the Honda K-engines with the highest flow capacity. Delivered with 2x 3/8" NPT to AN-8 Male fittings. AN-6 and AN-10 fittings are optional and sold as additional accessories. 3/8 NPT to AN-6 Male Part # : 700-04-101 3/8 NPT to AN-8 Male Part # : 700-04-102 3/8 NPT to AN-10 Male Part # : 700-04-103 Injector Safety Clips ensures sealing and safety A Nuke Performance unique feature is the injector safety clips that ensure the injectors maintain a perfect sealing even during extreme fuel pressure usage. Whether during assembly, installation on the engine or in the unfortunate case of an accident, the injectors will remain solidly to the fuel rail. No fuel is spilt even if the fuel pump continues to run or there is latent pressure in the fuel system. And when running high fuel pressure, the risk of the fuel rail rising from the injector disappears and you do not have to worry about engine fires due to unwanted fuel spray. Bolt-on solutions including the needed fittings and brackets This Honda K-series fuel rail kit comes with all needed fittings and brackets for an AN-8 fuel system. The kit comes with 2x 3/8" NPT to AN-8 Male fittings and sturdy lightweight aluminum brackets that guarantee a perfect fit against the Honda K engine intake and preventing any leaks and fuel pressure malfunctions. Make sure to use PTFE thread seal for all NPT fittings. Made in Sweden, guaranteeing the highest possible quality The Honda K engine motorsports fuel rail is developed, designed and manufactured by Nuke Performance for the highest possible quality and with the same hallmark as all the other parts in the lightweight motorsports range. There is no substitute for the quality of Nuke Performance! Honda 4cyl K Engine Motorsports Fuel Rail includes: 1 x Motorsports Fuel Rail, 4cyl 2 x Aluminum lightweight brackets 4 x Stainless steel M6*8mm for brackets 2 x 3/8 NPT to AN-8 Male fittings 1 x 1/4 BSPP plug 4 x Injector safety clips 8 x Stainless steel M4*6mm for safety clips SPECIFICATIONS Technical information : • Machined aluminium extrusion 6082-T6. • Delivered with 2x 3/8 NPT AN-8 fittings, 1x 1/4 BSPP plug. • 100% safe for alcoholic fuels such as E85. • Extremely lightweight design for motorsports use, more then 40% lightes then our ordinary fuel rails. • Stainless injector safety clips for safe seal operation. • Billet bolt-on brackets for Honda K engine included with the kit. • Anodized finish for long lasting function and corrosion free appearance. • Laserengraved and proudly branded with the Swedish flag. Injector fitment : Fits EV 14S Standard injectors : OEM injector sizes. Measurements : * Length : 321 mm Height : 28 mm Depth : 20 mm Weight : 203 g * All weights and measurements are excluding fittings...
226.80€
Ex Tax:189.00€
Nuke Performance Fuel Rail for Mercedes engines, available for listed engines. Do not forget to choose engine before purchase. Available setups:• Mercedes M104 * * Model specific fuel rail, delivered without mounting brackets. The body and all components are CNC-machined from 6082 aluminum alloy. We believe this is the Best Fuel rail on the market with the highest flow capacity. The Injector safety Bracket gives a Tight and Safe operation.The Bracket is Stainless Steel for a long-lasting, corrosion-free appearance. If space is an issue we recommend you to use our Banjo-type fitting, with an oversized internal dimension for minimum cavitation. All the fittings have Viton O-rings for long-lasting operation. If you can´t find the engine you are looking for, please contact us directly, our manufacturing process makes it possible to adapt this product to most engine setups out there. Technical information :• Aluminium extrusion 6082-T6.• Delivered with 2x 3/4 UNF AN-8 fittings and 1x 1/4 G plug.• Stainless injector safety brackets for safe operation.• Anodized finish for long lasting function and corrosion free appearance.• 17,5mm internal diameter which guarantees high and reliable flow.• Laserengraved.Measurements :Height : 36 mmDepth : 33 mm..
195.60€
Ex Tax:163.00€
Nuke Performance Mitsubishi Evo X Motorsports High-Performance Fuel Rail with injector safety clips and bolt-on brackets Mitsubishi Evo 10 engine 4cyl high-performance bolt-on Motorsports Fuel Rail kit for EVO X engine. Motorsports, lightweight fuel rail with unique injector safety clips that fit straight on the intake without heavy modifications. 100% safe for alcoholic fuels such as ethanol, E85. Lightweight motorsports fuel rail Unique injector safety clips Made in Sweden 100% E85 Proof 3/8 NPT thread outlets Bolt-on fitment, everything is included for : • Mitsubishi EVO X Give your engine over-dimensioned fuel flow for serious power outtake and the looks that are the Nuke Performance signum. Designed to look awesome and perform even better, this motorsports-grade fuel rail is the market-leading Mitsubishi Evo X fuel rail with the most functionality and delivered with unique injector safety clips and bolt-on brackets for a safe and easy mount to this popular 4cyl engine from Mitsubishi. This is the new motorsports range of fuel rails from Nuke Performance, the lightest fuel rails ever with a new line of fittings and injector safety clips. Developed with high demands from motorsport Co-developed with a world-leading Mitsubishi tuner, this fuel rail is set to perform under all conditions and for any horsepower requirement. This is the best fuel rail on the market for the Evo X engine from Mitsubishi with the highest flow capacity. Delivered with 3/8" NPT threads in each end, and an included 1/4 plug for the middle outlet. AN-6, AN-8, and AN-10 fittings are optional and sold as additional accessories so you can choose the perfect combination for your build. 3/8 NPT to AN-6 Male Part # : 700-04-101 3/8 NPT to AN-8 Male Part # : 700-04-102 3/8 NPT to AN-10 Male Part # : 700-04-103 3/8 NPT Swivel Banjo to Male outlet Part # : 700-03-10x 3/8 NPT Plug Part # : 700-05-105 Injector Safety Clips ensures sealing and safety A Nuke Performance unique feature is the injector safety clips that ensure the injectors maintain a perfect sealing even during extreme fuel pressure usage. Whether during assembly, installation on the engine, or in the unfortunate case of an accident, the injectors will remain solidly to the fuel rail. No fuel is spilled even if the fuel pump continues to run or there is latent pressure in the fuel system. And when running high fuel pressure, the risk of the fuel rail rising from the injector disappears and you do not have to worry about engine fires due to unwanted fuel spray. Bolt-on solutions including the needed bolt-on brackets This Mitsubishi Evo X fuel rail kit comes with all needed brackets for a clean and simple installation. The kit comes with sturdy lightweight aluminum brackets that guarantee a perfect fit against the Mitsubishi Evo X intake and preventing any leaks and fuel pressure malfunctions. Make sure to use a PTFE thread seal for all NPT fittings. The Mitsubishi 4cyl EVO X Motorsports Fuel Rail - Bolt-On is the best aftermarket fuel rail solution for your motorsports build. Made in Sweden, guaranteeing the highest possible quality The Mitsubishi 4cyl EVO X Motorsports Fuel Rail - Bolt-On is developed, designed, and manufactured by Nuke Performance for the highest possible quality and with the same hallmark as all the other parts in the lightweight motorsports range. There is no substitute for the quality of Nuke Performance! Mitsubishi 4cyl EVO X Motorsports Fuel Rail - Bolt-On includes: 1 x Motorsports Fuel Rail, 4cyl 2 x Aluminum lightweight brackets 4 x Stainless steel M6*8mm for brackets 1 x 1/4 BSPP plug 4 x Injector safety clips 8 x Stainless steel M4x6mm for safety clips 2 x Stainless steel M8x20 MC6S for attachment..
250.80€
Ex Tax:209.00€
Nuke Performance Mitsubishi EVO 8 high-performance, lightweight fuel rail Mitsubishi EVO VIII high-performance bolt-on Fuel Rail kit for the popular 4cyl EVO engine. Lightweight fuel rail that fit straight on the intake without heavy modifications. 100% safe for alcoholic fuels such as ethanol. Lightweight aluminum fuel rail Bolt-on brackets included Made in Sweden 100% E85 Proof Delivered with AN-8 fittings Bolt-on fitment, everything is included for : • Mitsubishi EVO 8 (EVO VIII) 4cyl Give your engine over-dimensioned fuel flow for serious power outtake and the looks that are the Nuke Performance signum. Designed to look awesome and perform even better, this motorsports-grade fuel rail is the EVO 8 fuel rail with the most functionality and delivered with bolt-on brackets for a safe and easy mount to this popular 4cyl engines from Mitsubishi. Delivered with AN-8 fittings and bolt-on brackets Co-developed with worldwide Mitsubishi EVO specialists, this fuel rail is set to perform under all conditions and for any horsepower requirement. This is the best fuel rail on the market for the EVO 4cyl engine with the highest flow capacity. Delivered with 2x 3/4 UNF to AN-8 Male fittings. AN-6 and AN-10 fittings are optional and sold as additional accessories. 3/4 UNF to AN-6 Male Part # : 700-01-101 3/4 UNF to AN-8 Male Part # : 700-01-102 3/4 UNF to AN-10 Male Part # : 700-01-103 For applications where space is an issue, we also have a range of banjo fittings that saves a lot of space. AN-6, AN-8 and AN-10 banjo fittings are optional and sold as additional accessories. 3/4 UNF Banjo to AN-6 Male Part # : 700-03-101 3/4 UNF Banjo to AN-8 Male Part # : 700-03-102 3/4 UNF Banjo to AN-10 Male Part # : 700-03-103 Made in Sweden, guaranteeing the highest possible quality The EVO 8 engine fuel rail is developed, designed and manufactured by Nuke Performance for the highest possible quality and with the same hallmark as all the other parts in the lightweight motorsports range. There is no substitute for the quality of Nuke Performance! Article replaces Part # : 100-09-201 + 99-09-101 SPECIFICATIONS Technical information : • Aluminium extrusion 6082-T6. • Delivered with 2x 3/4 UNF AN-8 fittings and 1x 1/4 G plug. • Anodized finish for long lasting function and corrosion free appearance. • 17,5mm internal diameter which guarantees high and reliable flow. • Laserengraved. Measurements : Height : 36 mm Depth : 33 mm..
216.00€
Ex Tax:180.00€
Nuke Performance Fuel Rail for Nissan engines, available for listed engines. Do not forget to choose engine before purchase. Available setups:• Nissan 200 4cyl CA18DET Bosch Injectors *• Nissan 200 4cyl CA18DET Original Injectors *• Nissan 200 4cyl SR20DET Sunny GTI-R *• Nissan Skyline 6cyl RB26DET * * Model specific fuel rail, delivered without mounting brackets. The body and all components are CNC-machined from 6082 aluminum alloy. We believe this is the Best Fuel rail on the market with the highest flow capacity. The Injector safety Bracket gives a Tight and Safe operation.The Bracket is Stainless Steel for a long-lasting, corrosion-free appearance. If space is an issue we recommend you to use our Banjo-type fitting, with an oversized internal dimension for minimum cavitation. All the fittings have Viton O-rings for long-lasting operation. If you can´t find the engine you are looking for, please contact us directly, our manufacturing process makes it possible to adapt this product to most engine setups out there. Technical information :• Aluminium extrusion 6082-T6.• Delivered with 2x 3/4 UNF AN-8 fittings and 1x 1/4 G plug.• Stainless injector safety brackets for safe operation.• Anodized finish for long lasting function and corrosion free appearance.• 17,5mm internal diameter which guarantees high and reliable flow.• Laserengraved.Measurements :Height : 36 mmDepth : 33 mm..
178.80€
Ex Tax:149.00€
Nuke Performance Fuel Rail for Nissan engines, available for listed engines. Do not forget to choose engine before purchase. Available setups:• Nissan 200 4cyl CA18DET Bosch Injectors *• Nissan 200 4cyl CA18DET Original Injectors *• Nissan 200 4cyl SR20DET Sunny GTI-R *• Nissan Skyline 6cyl RB26DET * * Model specific fuel rail, delivered without mounting brackets. The body and all components are CNC-machined from 6082 aluminum alloy. We believe this is the Best Fuel rail on the market with the highest flow capacity. The Injector safety Bracket gives a Tight and Safe operation.The Bracket is Stainless Steel for a long-lasting, corrosion-free appearance. If space is an issue we recommend you to use our Banjo-type fitting, with an oversized internal dimension for minimum cavitation. All the fittings have Viton O-rings for long-lasting operation. If you can´t find the engine you are looking for, please contact us directly, our manufacturing process makes it possible to adapt this product to most engine setups out there. Technical information :• Aluminium extrusion 6082-T6.• Delivered with 2x 3/4 UNF AN-8 fittings and 1x 1/4 G plug.• Stainless injector safety brackets for safe operation.• Anodized finish for long lasting function and corrosion free appearance.• 17,5mm internal diameter which guarantees high and reliable flow.• Laserengraved.Measurements :Height : 36 mmDepth : 33 mm..
178.80€
Ex Tax:149.00€
Nuke Performance Fuel Rail for Nissan engines, available for listed engines. Do not forget to choose engine before purchase. Available setups:• Nissan 200 4cyl CA18DET Bosch Injectors *• Nissan 200 4cyl CA18DET Original Injectors *• Nissan 200 4cyl SR20DET Sunny GTI-R *• Nissan Skyline 6cyl RB26DET * * Model specific fuel rail, delivered without mounting brackets. The body and all components are CNC-machined from 6082 aluminum alloy. We believe this is the Best Fuel rail on the market with the highest flow capacity. The Injector safety Bracket gives a Tight and Safe operation.The Bracket is Stainless Steel for a long-lasting, corrosion-free appearance. If space is an issue we recommend you to use our Banjo-type fitting, with an oversized internal dimension for minimum cavitation. All the fittings have Viton O-rings for long-lasting operation. If you can´t find the engine you are looking for, please contact us directly, our manufacturing process makes it possible to adapt this product to most engine setups out there. Technical information :• Aluminium extrusion 6082-T6.• Delivered with 2x 3/4 UNF AN-8 fittings and 1x 1/4 G plug.• Stainless injector safety brackets for safe operation.• Anodized finish for long lasting function and corrosion free appearance.• 17,5mm internal diameter which guarantees high and reliable flow.• Laserengraved.Measurements :Height : 36 mmDepth : 33 mm..
178.80€
Ex Tax:149.00€
Nuke Performance Fuel Rail for Nissan engines, available for listed engines. Do not forget to choose engine before purchase. Available setups:• Nissan 200 4cyl CA18DET Bosch Injectors *• Nissan 200 4cyl CA18DET Original Injectors *• Nissan 200 4cyl SR20DET Sunny GTI-R *• Nissan Skyline 6cyl RB26DET * * Model specific fuel rail, delivered without mounting brackets. The body and all components are CNC-machined from 6082 aluminum alloy. We believe this is the Best Fuel rail on the market with the highest flow capacity. The Injector safety Bracket gives a Tight and Safe operation.The Bracket is Stainless Steel for a long-lasting, corrosion-free appearance. If space is an issue we recommend you to use our Banjo-type fitting, with an oversized internal dimension for minimum cavitation. All the fittings have Viton O-rings for long-lasting operation. If you can´t find the engine you are looking for, please contact us directly, our manufacturing process makes it possible to adapt this product to most engine setups out there. Technical information :• Aluminium extrusion 6082-T6.• Delivered with 2x 3/4 UNF AN-8 fittings and 1x 1/4 G plug.• Stainless injector safety brackets for safe operation.• Anodized finish for long lasting function and corrosion free appearance.• 17,5mm internal diameter which guarantees high and reliable flow.• Laserengraved.Measurements :Height : 36 mmDepth : 33 mm..
195.60€
Ex Tax:163.00€
Nuke Performance Opel / Vauxhall 4cyl C20Let engine Motorsports High-Performance Fuel Rail with injector safety clips and bolt-on brackets. Aftermarket ethanol approved fuel rail for the Open C20LET engine in the Nuke Performance motorsports profile. Motorsports, lightweight fuel rail with unique injector safety clips that fit straight to the intake without heavy modifications. 100% safe for alcoholic fuels such as ethanol, E85. Lightweight motorsports fuel rail Unique injector safety clips Made in Sweden 100% proof for all types of fuel, including E85 3/8 NPT thread outlets Fits straight to intake with included brackets for : • Opel C20Let Give your engine over-dimensioned fuel flow for serious power outtake and the looks that are the Nuke Performance signum. Designed to look awesome and perform even better, this motorsports-grade fuel rail is the market-leading Opel C20Let fuel rail with the most functionality and delivered with unique injector safety clips and bolt-on brackets for a safe and easy mount to this popular 4cyl engine from Opel / Vauxhall. Developed with high demands from motorsport Co-developed with a world-leading Mitsubishi tuner, this fuel rail is set to perform under all conditions and for any horsepower requirement. This is the best fuel rail on the market for the Opel C20-let engine from Opel with the highest flow capacity. Delivered with 3/8" NPT threads in each end, and an included 1/4 plug for the middle outlet. AN-6, AN-8, and AN-10 fittings are optional and sold as additional accessories so you can choose the perfect combination for your build. 3/8 NPT to AN-6 Male Part # : 700-04-101 3/8 NPT to AN-8 Male Part # : 700-04-102 3/8 NPT to AN-10 Male Part # : 700-04-103 3/8 NPT Swivel Banjo to Male outlet Part # : 700-03-10x 3/8 NPT Plug Part # : 700-05-105 Injector Safety Clips ensures sealing and safety A Nuke Performance unique feature is the injector safety clips that ensure the injectors maintain a perfect sealing even during extreme fuel pressure usage. Whether during assembly, installation on the engine, or in the unfortunate case of an accident, the injectors will remain solidly to the fuel rail. No fuel is spilled even if the fuel pump continues to run or there is latent pressure in the fuel system. And when running high fuel pressure, the risk of the fuel rail rising from the injector disappears and you do not have to worry about engine fires due to unwanted fuel spray. Bolt-on solutions including the needed bolt-on brackets This Opel 4cyl fuel rail kit comes with all needed brackets for a clean and simple installation to your intake. The kit comes with sturdy lightweight aluminum brackets that guarantee a perfect fit against the Opel C 20 let intake and prevent any leaks and fuel pressure malfunctions. Make sure to use a PTFE thread seal for all NPT fittings. The fuel rail is only bolt-on to the inlet, not to OEM injectors or fuel lines. With the NPT threaded inlet / outlet it is easy so setup your aftermarket fuel system. The Opel 4cyl C20Let-Engine Motorsports Fuel Rail - Bolt-On is the best aftermarket fuel rail solution for your motorsports build. Made in Sweden, guaranteeing the highest possible quality The Opel 4cyl C20Let-Engine Motorsports fuel rail Bolt-On is developed, designed, and manufactured by Nuke Performance for the highest possible quality and with the same hallmark as all the other parts in the lightweight motorsports range. There is no substitute for the quality of Nuke Performance! Opel 4cyl C20Let-Engine Motorsports fuel rail Bolt-On includes: 1 x Motorsports Fuel Rail, 4cyl 2 x Aluminum lightweight brackets 4 x Stainless steel M6*8mm for brackets 1 x 1/4 BSPP plug 4 x Injector safety clips 8 x Stainless steel M4x6mm for safety clips Please take notice of, the kit doesn´t include adapters to mount the fuel rail to the OEM fuel lines. This fuel rail either demands swapping to AN fuel lines or using adapters from NPT thread to OEM connectors...
250.80€
Ex Tax:209.00€
Nuke Performance Porsche 964 / 993 Engine Motorsports High-Performance Fuel Rail Porsche 964, Porsche 993 engine 6cyl high-performance bolt-on Motorsports Fuel Rail kit for Porsche 6cyl 964 / 993 engines. Motorsports, lightweight fuel rail with unique injector safety clips that fit straight on the intake without heavy modifications. 100% safe for alcoholic fuels such as ethanol, E85. Lightweight motorsports fuel rail Unique injector safety clips Made in Sweden 100% E85 Proof 3/8 NPT threaded inlet/outlet Bolt-on fitment, brackets included for : • Porsche 964 • Porsche 993 Kit made for the type of injectors : • Bosch EV14 L Give your engine over-dimensioned fuel flow for serious power outtake and the looks that are the Nuke Performance signum. Designed to look awesome and perform even better, this motorsports-grade fuel rail is the Porsche 964 / 993 fuel rail with the most functionality and delivered with unique injector safety clips and bolt-on brackets for a safe and easy mount to this popular 6cyl engine from Porsche. This is the new motorsports range of fuel rails from Nuke Performance, their lightest fuel rails ever with a new line of fittings and injector safety clips. Developed with high demands from motorsport Co-developed with worldwide Porsche tuners and motorsports teams, these fuel rail is set to perform under all conditions and for any horsepower requirement. This is the best fuel rail on the market for the Porsche engine with the highest flow capacity. Inlet and outlet thread is 3/8" NPT and fittings are available for AN-6 to AN-10 and sold as additional accessories, choose the right sized fittings for your preferred setup. 3/8 NPT to AN-6 Male Part #: 700-04-101 3/8 NPT to AN-8 Male Part #: 700-04-102 3/8 NPT to AN-10 Male Part #: 700-04-103 3/8 NPT Banjo to AN-6 Male Part #: 700-03-104 3/8 NPT Banjo to AN-8 Male Part #: 700-03-105 3/8 NPT Banjo to AN-10 Male Part #: 700-03-106 PTFE Thread Seal Tape 12x.0.75mm x10m Part #: 700-05-201 Injector Safety Clips ensures sealing and safety A Nuke Performance unique feature is the injector safety clips that ensure the injectors maintain a perfect sealing even during extreme fuel pressure usage. Whether during assembly, installation on the engine, or in the unfortunate case of an accident, the injectors will remain solidly to the fuel rail. No fuel is spilled even if the fuel pump continues to run or there is latent pressure in the fuel system. And when running high fuel pressure, the risk of the fuel rail rising from the injector disappears and you do not have to worry about engine fires due to unwanted fuel spray. Bolt-on solutions including the needed fittings and brackets This Porsche 6cyl 964/993 Fuel Rails kit comes with all needed brackets for your fuel system installation. The kit comes with sturdy lightweight stainless steel brackets that guarantee a perfect fit against the Porsche intake and preventing any leaks and fuel pressure malfunctions. Make sure to use PTFE thread seal for all NPT fittings. Made in Sweden, guaranteeing the highest possible quality The Porsche 6cyl 964/993 Fuel Rails motorsports fuel rail is developed, designed, and manufactured by Nuke Performance for the highest possible quality and with the same hallmark as all the other parts in the lightweight motorsports range. There is no substitute for the quality of Nuke Performance! Porsche 964/993 Engine Motorsports Fuel Rail includes: 2 x Motorsports Fuel Rail, 3cyl 2 x Stainless steel lightweight brackets 12 x Stainless steel M6x8mm for fuel rail brackets 6 x Stainless steel injector safety clips 12 x Stainless steel M4*6mm for safety clips 2 x 1/4 BSPP plug..
390.00€
Ex Tax:325.00€
Nuke Performance SAAB 4cyl 9-3 high-performance, lightweight fuel railSaab 9-3 4cyl high-performance bolt-on Fuel Rail kit for the classic Saab engine. Lightweight fuel rail with unique injector safety clips that fit straight on the intake without heavy modifications. 100% safe for alcoholic fuels such as ethanol. Lightweight aluminum fuel rail Unique injector safety clips Bolt-on brackets included Made in Sweden 100% E85 Proof Delivered with AN-8 fittings Bolt-on fitment, everything is included for :• SAAB 9-3 4cyl Give your engine over-dimensioned fuel flow for serious power outtake and the looks that are the Nuke Performance signum. Designed to look awesome and perform even better, this motorsports-grade fuel rail is the Volvo red engine fuel rail with the most functionality and delivered with unique injector safety clips and bolt-on brackets for a safe and easy mount to this classic 4cyl engine from Saab. Delivered with AN-8 fittings and bolt-on bracketsCo-developed with worldwide Saab specialists, this fuel rail is set to perform under all conditions and for any horsepower requirement. This is the best fuel rail on the market for the 4cyl Saab engine with the highest flow capacity. Delivered with 2x 3/4 UNF to AN-8 Male fittings. AN-6 and AN-10 fittings are optional and sold as additional accessories.3/4 UNF to AN-6 Male Part # : 700-01-1013/4 UNF to AN-8 Male Part # : 700-01-1023/4 UNF to AN-10 Male Part # : 700-01-103 For applications where space is an issue, we also have a range of banjo fittings that saves a lot of space. AN-6, AN-8 and AN-10 banjo fittings are optional and sold as additional accessories.3/4 UNF Banjo to AN-6 Male Part # : 700-03-1013/4 UNF Banjo to AN-8 Male Part # : 700-03-1023/4 UNF Banjo to AN-10 Male Part # : 700-03-103 Made in Sweden, guaranteeing the highest possible qualityThe red engine fuel rail is developed, designed and manufactured by Nuke Performance for the highest possible quality and with the same hallmark as all the other parts in the lightweight motorsports range. There is no substitute for the quality of Nuke Performance! Technical information :• Machined aluminium extrusion 6082-T6.• Delivered with 2x 3/4 UNF AN-8 Male fittings, 1x 1/4 BSPP plug.• 100% safe for alcoholic fuels such as E85.• Stainless injector safety clips for safe seal operation.• Anodized finish for long lasting function and corrosion free appearance.• 17.5mm internal diameter which guarantees high and reliable flow.Measurements : *Height : 36 mm (1.41")Depth : 33 mm (1.29")Weight : 460 g (16.22oz)..
216.00€
Ex Tax:180.00€
Nuke Performance SAAB 4cyl 900 high-performance, lightweight fuel railSaab 900 4cyl high-performance bolt-on Fuel Rail kit for the classic Saab engine. Lightweight fuel rail with unique injector safety clips that fit straight on the intake without heavy modifications. 100% safe for alcoholic fuels such as ethanol. Lightweight aluminum fuel rail Unique injector safety clips Bolt-on brackets included Made in Sweden 100% E85 Proof Delivered with AN-8 fittings Bolt-on fitment, everything is included for :• SAAB 900 4cyl Give your engine over-dimensioned fuel flow for serious power outtake and the looks that are the Nuke Performance signum. Designed to look awesome and perform even better, this motorsports-grade fuel rail is the Volvo red engine fuel rail with the most functionality and delivered with unique injector safety clips and bolt-on brackets for a safe and easy mount to this classic 4cyl engine from Saab. Delivered with AN-8 fittings and bolt-on bracketsCo-developed with worldwide Saab specialists, this fuel rail is set to perform under all conditions and for any horsepower requirement. This is the best fuel rail on the market for the 4cyl Saab engine with the highest flow capacity. Delivered with 2x 3/4 UNF to AN-8 Male fittings. AN-6 and AN-10 fittings are optional and sold as additional accessories.3/4 UNF to AN-6 Male Part # : 700-01-1013/4 UNF to AN-8 Male Part # : 700-01-1023/4 UNF to AN-10 Male Part # : 700-01-103 For applications where space is an issue, we also have a range of banjo fittings that saves a lot of space. AN-6, AN-8 and AN-10 banjo fittings are optional and sold as additional accessories.3/4 UNF Banjo to AN-6 Male Part # : 700-03-1013/4 UNF Banjo to AN-8 Male Part # : 700-03-1023/4 UNF Banjo to AN-10 Male Part # : 700-03-103 Made in Sweden, guaranteeing the highest possible qualityThe red engine fuel rail is developed, designed and manufactured by Nuke Performance for the highest possible quality and with the same hallmark as all the other parts in the lightweight motorsports range. There is no substitute for the quality of Nuke Performance! Technical information :• Machined aluminium extrusion 6082-T6.• Delivered with 2x 3/4 UNF AN-8 Male fittings, 1x 1/4 BSPP plug.• 100% safe for alcoholic fuels such as E85.• Stainless injector safety clips for safe seal operation.• Anodized finish for long lasting function and corrosion free appearance.• 17.5mm internal diameter which guarantees high and reliable flow.Measurements : *Height : 36 mm (1.41")Depth : 33 mm (1.29")Weight : 460 g (16.22oz)..
216.00€
Ex Tax:180.00€
Nuke Performance SAAB 4cyl 9000 high-performance, lightweight fuel railSaab 9000 4cyl high-performance bolt-on Fuel Rail kit for the classic Saab engine. Lightweight fuel rail with unique injector safety clips that fit straight on the intake without heavy modifications. 100% safe for alcoholic fuels such as ethanol. Lightweight aluminum fuel rail Unique injector safety clips Bolt-on brackets included Made in Sweden 100% E85 Proof Delivered with AN-8 fittings Bolt-on fitment, everything is included for :• SAAB 9000 4cyl Give your engine over-dimensioned fuel flow for serious power outtake and the looks that are the Nuke Performance signum. Designed to look awesome and perform even better, this motorsports-grade fuel rail is the Volvo red engine fuel rail with the most functionality and delivered with unique injector safety clips and bolt-on brackets for a safe and easy mount to this classic 4cyl engine from Saab. Delivered with AN-8 fittings and bolt-on bracketsCo-developed with worldwide Saab specialists, this fuel rail is set to perform under all conditions and for any horsepower requirement. This is the best fuel rail on the market for the 4cyl Saab engine with the highest flow capacity. Delivered with 2x 3/4 UNF to AN-8 Male fittings. AN-6 and AN-10 fittings are optional and sold as additional accessories.3/4 UNF to AN-6 Male Part # : 700-01-1013/4 UNF to AN-8 Male Part # : 700-01-1023/4 UNF to AN-10 Male Part # : 700-01-103 For applications where space is an issue, we also have a range of banjo fittings that saves a lot of space. AN-6, AN-8 and AN-10 banjo fittings are optional and sold as additional accessories.3/4 UNF Banjo to AN-6 Male Part # : 700-03-1013/4 UNF Banjo to AN-8 Male Part # : 700-03-1023/4 UNF Banjo to AN-10 Male Part # : 700-03-103 Made in Sweden, guaranteeing the highest possible qualityThe red engine fuel rail is developed, designed and manufactured by Nuke Performance for the highest possible quality and with the same hallmark as all the other parts in the lightweight motorsports range. There is no substitute for the quality of Nuke Performance! Technical information :• Machined aluminium extrusion 6082-T6.• Delivered with 2x 3/4 UNF AN-8 Male fittings, 1x 1/4 BSPP plug.• 100% safe for alcoholic fuels such as E85.• Stainless injector safety clips for safe seal operation.• Anodized finish for long lasting function and corrosion free appearance.• 17.5mm internal diameter which guarantees high and reliable flow.Measurements : *Height : 36 mm (1.41")Depth : 33 mm (1.29")Weight : 460 g (16.22oz)..
216.00€
Ex Tax:180.00€
Nuke Performance Toyota 1JZ high-performance, lightweight fuel rail for "non VVTi" version of the popular 1JZ engine.Toyota 6cyl 1JZ high-performance bolt-on Fuel Rail kit for the popular 6cyl 1JZ engine. This kit is for the popular Bosch / 14mm injectors. Lightweight fuel rail with unique injector safety clips that fit straight on the intake without heavy modifications. 100% safe for alcoholic fuels such as ethanol. Lightweight aluminum fuel rail Unique injector safety clips Bolt-on brackets included for non-VVTi Injector seats included Made in Sweden 100% E85 Proof Delivered with AN-8 fittings Bolt-on fitment, everything is included for :• Toyota 1JZ with Bosch injectors (non VVTi version) Kit made for the type of injectors :• Bosch EV14 L Give your engine over-dimensioned fuel flow for serious power outtake and the looks that are the Nuke Performance signum. Designed to look awesome and perform even better, this motorsports-grade fuel rail is the Toyota 1JZ fuel rail with the most functionality and delivered with unique injector safety clips and bolt-on brackets for a safe and easy mount to this popular 6cyl engines from Toyota. Delivered with AN-8 fittings and bolt-on bracketsCo-developed with worldwide 1JZ specialists, this fuel rail is set to perform under all conditions and for any horsepower requirement. This is the best fuel rail on the market for the 1JZ Toyota straight-six engine with the highest flow capacity. Delivered with 2x 3/4 UNF to AN-8 Male fittings. AN-6 and AN-10 fittings are optional and sold as additional accessories.3/4 UNF to AN-6 Male Part # : 700-01-1013/4 UNF to AN-8 Male Part # : 700-01-1023/4 UNF to AN-10 Male Part # : 700-01-103 For applications where space is an issue, we also have a range of banjo fittings that saves a lot of space. AN-6, AN-8 and AN-10 banjo fittings are optional and sold as additional accessories.3/4 UNF Banjo to AN-6 Male Part # : 700-03-1013/4 UNF Banjo to AN-8 Male Part # : 700-03-1023/4 UNF Banjo to AN-10 Male Part # : 700-03-103 Made in Sweden, guaranteeing the highest possible qualityThe 1JZ engine fuel rail is developed, designed and manufactured by Nuke Performance for the highest possible quality and with the same hallmark as all the other parts in the lightweight motorsports range. There is no substitute for the quality of Nuke Performance! Toyota 6cyl 1JZ 14mm Injectors (non VVTi) Fuel Rail - Bolt-On includes:1x Fuel rail 509mm profile for 6cyl6x Injector safety clips12x Stainless steel bolts for safety clips2x Stainless steel brackets2x Stainless steel bolts for brackets2x Stainless steel bolts for intake6x Injector adapters with Viton o-rings2x AN-8 (3/4 UNF) to AN-8 Male fittings Article replaces Part # : 100-05-203 + 99-05-102 Technical information :• Machined aluminium extrusion 6082-T6.• Delivered with 2x 3/4 UNF AN-8 Male fittings, 1x 1/4 BSPP plug.• 100% safe for alcoholic fuels such as E85.• Stainless injector safety clips for safe seal operation.• Anodized finish for long lasting function and corrosion free appearance.• 17.5mm internal diameter which guarantees high and reliable flow.Measurements : *Length : 509 mm (20.04")Height : 36 mm (1.41")Depth : 33 mm (1.29")Weight : 697 g (24.58oz)* All weights and measurements are excluding fittings...
238.80€
Ex Tax:199.00€
Nuke Performance Toyota 2JZ high-performance, lightweight fuel rail for "non VVTi" version of the popular 2JZ engine. Toyota 6cyl 2JZ high-performance bolt-on Fuel Rail kit for the popular 6cyl 2JZ engine. This kit is for the popular Bosch / 14mm injectors. Lightweight fuel rail with unique injector safety clips that fit straight on the intake without heavy modifications. 100% safe for alcoholic fuels such as ethanol. Lightweight aluminum fuel rail Unique injector safety clips Bolt-on brackets included for non-VVTi Injector seats included Made in Sweden 100% E85 Proof Delivered with AN-8 fittings Bolt-on fitment, everything is included for :• Toyota 2JZ with Bosch injectors (non VVTi version) Kit made for the type of injectors :• Bosch EV14 L Give your engine over-dimensioned fuel flow for serious power outtake and the looks that are the Nuke Performance signum. Designed to look awesome and perform even better, this motorsports-grade fuel rail is the Toyota 2JZ fuel rail with the most functionality and delivered with unique injector safety clips and bolt-on brackets for a safe and easy mount to this popular 6cyl engine from Toyota that was mounted in the iconic Toyota Supra MKIV. Delivered with AN-8 fittings and bolt-on bracketsCo-developed with worldwide 2JZ specialists, this fuel rail is set to perform under all conditions and for any horsepower requirement. This is the best fuel rail on the market for the 2JZ Toyota straight-six engine with the highest flow capacity. Delivered with 2x 3/4 UNF to AN-8 Male fittings. AN-6 and AN-10 fittings are optional and sold as additional accessories.3/4 UNF to AN-6 Male Part # : 700-01-1013/4 UNF to AN-8 Male Part # : 700-01-1023/4 UNF to AN-10 Male Part # : 700-01-103 For applications where space is an issue, we also have a range of banjo fittings that saves a lot of space. AN-6, AN-8, and AN-10 banjo fittings are optional and sold as additional accessories.3/4 UNF Banjo to AN-6 Male Part # : 700-03-1013/4 UNF Banjo to AN-8 Male Part # : 700-03-1023/4 UNF Banjo to AN-10 Male Part # : 700-03-103 Made in Sweden, guaranteeing the highest possible qualityThe 2JZ engine fuel rail is developed, designed, and manufactured by Nuke Performance for the highest possible quality and with the same hallmark as all the other parts in the lightweight motorsports range. There is no substitute for the quality of Nuke Performance! Toyota 6cyl 2JZ 14mm Injectors (non VVTi) Fuel Rail - Bolt-On includes:1x Fuel rail 505mm profile for 6cyl6x Injector safety clips12x Stainless steel bolts for safety clips2x Aluminum brackets2x Stainless steel bolts for brackets2x Stainless steel bolts for intake6x Injector adapters with Viton o-rings2x AN-8 (3/4 UNF) to AN-8 Male fittings Article replaces Part # : 100-05-201 + 99-05-101 Technical information :• Machined aluminium extrusion 6082-T6.• Delivered with 2x 3/4 UNF AN-8 Male fittings, 1x 1/4 BSPP plug.• 100% safe for alcoholic fuels such as E85.• Stainless injector safety clips for safe seal operation.• Anodized finish for long lasting function and corrosion free appearance.• 17.5mm internal diameter which guarantees high and reliable flow.Measurements : *Length : 505 mm (19.88")Height : 36 mm (1.41")Depth : 33 mm (1.29")Weight : 645 g (22.75oz)* All weights and measurements are excluding fittings...
282.00€
Ex Tax:235.00€
Nuke Performance Fuel Rail for Volkswagen engines, available for listed engines. Do not forget to choose engine before purchase. Available setups: • Volkswagen 16v * • Volkswagen G60 * • Volkswagen VR6 12v* * Model specific fuel rail, delivered without mounting brackets. The body and all components are CNC-machined from 6082 aluminum alloy. We believe this is the Best Fuel rail on the market with the highest flow capacity. The Injector safety Bracket gives a Tight and Safe operation. The Bracket is Stainless Steel for a long-lasting, corrosion-free appearance. If space is an issue we recommend you to use our Banjo-type fitting, with oversized internal dimension for minimum cavitation. All the fittings have Viton O-rings for long-lasting operation. If you can´t find the engine you are looking for, please contact us directly, our manufacturing process makes it possible to adapt this product to most engine setups out there. SPECIFICATIONS Technical information : • Aluminium extrusion 6082-T6. • Delivered with 2x 3/4 UNF AN-8 fittings and 1x 1/4 G plug. • Stainless injector safety brackets for safe operation. • Anodized finish for long lasting function and corrosion free appearance. • 17,5mm internal diameter which guarantees high and reliable flow. • Laserengraved. Measurements : Height : 36 mm Depth : 33 mm..
178.80€
Ex Tax:149.00€
Nuke Performance Fuel Rail for Volkswagen engines, available for listed engines. Do not forget to choose engine before purchase. Available setups: • Volkswagen 16v * • Volkswagen G60 * • Volkswagen VR6 12v* * Model specific fuel rail, delivered without mounting brackets. The body and all components are CNC-machined from 6082 aluminum alloy. We believe this is the Best Fuel rail on the market with the highest flow capacity. The Injector safety Bracket gives a Tight and Safe operation. The Bracket is Stainless Steel for a long-lasting, corrosion-free appearance. If space is an issue we recommend you to use our Banjo-type fitting, with oversized internal dimension for minimum cavitation. All the fittings have Viton O-rings for long-lasting operation. If you can´t find the engine you are looking for, please contact us directly, our manufacturing process makes it possible to adapt this product to most engine setups out there. SPECIFICATIONS Technical information : • Aluminium extrusion 6082-T6. • Delivered with 2x 3/4 UNF AN-8 fittings and 1x 1/4 G plug. • Stainless injector safety brackets for safe operation. • Anodized finish for long lasting function and corrosion free appearance. • 17,5mm internal diameter which guarantees high and reliable flow. • Laserengraved. Measurements : Height : 36 mm Depth : 33 mm..
195.60€
Ex Tax:163.00€
Nuke Performance Volvo Red engine 8v/16v high-performance, lightweight fuel railVolvo Red engine 8v/16v B23/230 4cyl high-performance bolt-on Fuel Rail kit for the popular red engine. Lightweight fuel rail with unique injector safety clips that fit straight on the intake without heavy modifications. 100% safe for alcoholic fuels such as ethanol. Lightweight aluminum fuel rail Unique injector safety clips Bolt-on brackets included Made in Sweden 100% E85 Proof Delivered with AN-8 fittings Bolt-on fitment, everything is included for :• Volvo Red engine 8v/16v B23/230 4cyl Give your engine over-dimensioned fuel flow for serious power outtake and the looks that are the Nuke Performance signum. Designed to look awesome and perform even better, this motorsports-grade fuel rail is the Volvo red engine fuel rail with the most functionality and delivered with unique injector safety clips and bolt-on brackets for a safe and easy mount to this popular 4cyl engines from Volvo. Delivered with AN-8 fittings and bolt-on bracketsCo-developed with worldwide Volvo specialists, this fuel rail is set to perform under all conditions and for any horsepower requirement. This is the best fuel rail on the market for the 4cyl Volvo engine with the highest flow capacity. Delivered with 2x 3/4 UNF to AN-8 Male fittings. AN-6 and AN-10 fittings are optional and sold as additional accessories.3/4 UNF to AN-6 Male Part # : 700-01-1013/4 UNF to AN-8 Male Part # : 700-01-1023/4 UNF to AN-10 Male Part # : 700-01-103 For applications where space is an issue, we also have a range of banjo fittings that saves a lot of space. AN-6, AN-8 and AN-10 banjo fittings are optional and sold as additional accessories.3/4 UNF Banjo to AN-6 Male Part # : 700-03-1013/4 UNF Banjo to AN-8 Male Part # : 700-03-1023/4 UNF Banjo to AN-10 Male Part # : 700-03-103 Made in Sweden, guaranteeing the highest possible qualityThe red engine fuel rail is developed, designed and manufactured by Nuke Performance for the highest possible quality and with the same hallmark as all the other parts in the lightweight motorsports range. There is no substitute for the quality of Nuke Performance! Technical information :• Machined aluminium extrusion 6082-T6.• Delivered with 2x 3/4 UNF AN-8 Male fittings, 1x 1/4 BSPP plug.• 100% safe for alcoholic fuels such as E85.• Stainless injector safety clips for safe seal operation.• Anodized finish for long lasting function and corrosion free appearance.• 17.5mm internal diameter which guarantees high and reliable flow.Measurements : *Length : 362 mm (14.25")Height : 36 mm (1.41")Depth : 33 mm (1.29")Weight : 460 g (16.22oz)* All weights and measurements are excluding fittings...
178.80€
Ex Tax:149.00€
Nuke Performance Volvo Red engine 8v/16v high-performance, lightweight fuel rail Volvo Red engine 8v/16v B23/230 4cyl high-performance bolt-on Fuel Rail kit for the popular red engine. Lightweight fuel rail with unique injector safety clips that fit straight on the intake without heavy modifications. 100% safe for alcoholic fuels such as ethanol. Lightweight aluminum fuel rail Unique injector safety clips Bolt-on brackets included Made in Sweden 100% E85 Proof Delivered with AN-8 fittings Bolt-on fitment, everything is included for : • Volvo Red engine 8v/16v B23/230 4cyl Give your engine over-dimensioned fuel flow for serious power outtake and the looks that are the Nuke Performance signum. Designed to look awesome and perform even better, this motorsports-grade fuel rail is the Volvo red engine fuel rail with the most functionality and delivered with unique injector safety clips and bolt-on brackets for a safe and easy mount to this popular 4cyl engines from Volvo. Delivered with AN-8 fittings and bolt-on brackets Co-developed with worldwide Volvo specialists, this fuel rail is set to perform under all conditions and for any horsepower requirement. This is the best fuel rail on the market for the 4cyl Volvo engine with the highest flow capacity. Delivered with 2x 3/4 UNF to AN-8 Male fittings. AN-6 and AN-10 fittings are optional and sold as additional accessories. 3/4 UNF to AN-6 Male Part # : 700-01-101 3/4 UNF to AN-8 Male Part # : 700-01-102 3/4 UNF to AN-10 Male Part # : 700-01-103 For applications where space is an issue, we also have a range of banjo fittings that saves a lot of space. AN-6, AN-8 and AN-10 banjo fittings are optional and sold as additional accessories. 3/4 UNF Banjo to AN-6 Male Part # : 700-03-101 3/4 UNF Banjo to AN-8 Male Part # : 700-03-102 3/4 UNF Banjo to AN-10 Male Part # : 700-03-103 Made in Sweden, guaranteeing the highest possible quality The red engine fuel rail is developed, designed and manufactured by Nuke Performance for the highest possible quality and with the same hallmark as all the other parts in the lightweight motorsports range. There is no substitute for the quality of Nuke Performance! Article replaces Part # : 100-01-201 + 99-01-101 SPECIFICATIONS Technical information : • Machined aluminium extrusion 6082-T6. • Delivered with 2x 3/4 UNF AN-8 Male fittings, 1x 1/4 BSPP plug. • 100% safe for alcoholic fuels such as E85. • Stainless injector safety clips for safe seal operation. • Anodized finish for long lasting function and corrosion free appearance. • 17.5mm internal diameter which guarantees high and reliable flow. Measurements : * Length : 362 mm (14.25") Height : 36 mm (1.41") Depth : 33 mm (1.29") Weight : 460 g (16.22oz)..
216.00€
Ex Tax:180.00€
Nuke Performance Volvo Fuel rail for Volvo engines, available for listed engines. Do not forget to choose your engine before purchase. These fuel rails are model adapted and is delivered without mounting hardware. Available setups:• Volvo Fuel rails 4cyl S40 / V40 *• Volvo Fuel rails 5cyl 850, C / S / V70, S60, S80, V70N *• Volvo Red Engine 4cyl 8v / 16v, B23 / 230 *• Volvo Fuel rails White Engine 960 / S90 / V90 *• Volvo Red Engine 4cyl 8v / 16v, B23 / 230 Bolt-On : * Model specific volvo fuel rail, delivered without mounting brackets. The body and all components are CNC-machined from 6082 aluminum alloy. We believe this is the Best Fuel rail on the market with the highest flow capacity. The Injector safety Bracket gives a Tight and Safe operation.The Bracket is Stainless Steel for a long-lasting, corrosion-free appearance. If space is an issue we recommend you to use our Banjo-type fitting, with an oversized internal dimension for minimum cavitation. All the fittings have Viton O-rings for long-lasting operation. If you can´t find the engine you are looking for, please contact us directly, our manufacturing process makes it possible to adapt this product to most engine setups out there. Technical information :• Aluminium extrusion 6082-T6.• Delivered with 2x 3/4 UNF AN-8 fittings and 1x 1/4 G plug.• Stainless injector safety brackets for safe operation.• Anodized finish for long lasting function and corrosion free appearance.• 17,5mm internal diameter which guarantees high and reliable flow.• Laserengraved.Measurements :Height : 36 mmDepth : 33 mm..
178.80€
Ex Tax:149.00€
Nuke Performance Volvo Fuel rail for Volvo engines, available for listed engines. Do not forget to choose your engine before purchase. These fuel rails are model adapted and is delivered without mounting hardware. Available setups:• Volvo Fuel rails 4cyl S40 / V40 *• Volvo Fuel rails 5cyl 850, C / S / V70, S60, S80, V70N *• Volvo Red Engine 4cyl 8v / 16v, B23 / 230 *• Volvo Fuel rails White Engine 960 / S90 / V90 *• Volvo Red Engine 4cyl 8v / 16v, B23 / 230 Bolt-On : * Model specific volvo fuel rail, delivered without mounting brackets. The body and all components are CNC-machined from 6082 aluminum alloy. We believe this is the Best Fuel rail on the market with the highest flow capacity. The Injector safety Bracket gives a Tight and Safe operation.The Bracket is Stainless Steel for a long-lasting, corrosion-free appearance. If space is an issue we recommend you to use our Banjo-type fitting, with an oversized internal dimension for minimum cavitation. All the fittings have Viton O-rings for long-lasting operation. If you can´t find the engine you are looking for, please contact us directly, our manufacturing process makes it possible to adapt this product to most engine setups out there. Technical information :• Aluminium extrusion 6082-T6.• Delivered with 2x 3/4 UNF AN-8 fittings and 1x 1/4 G plug.• Stainless injector safety brackets for safe operation.• Anodized finish for long lasting function and corrosion free appearance.• 17,5mm internal diameter which guarantees high and reliable flow.• Laserengraved.Measurements :Height : 36 mmDepth : 33 mm..
190.80€
Ex Tax:159.00€
Nuke Performance Volvo Fuel rail for Volvo engines, available for listed engines. Do not forget to choose your engine before purchase. These fuel rails are model adapted and is delivered without mounting hardware. Available setups:• Volvo Fuel rails 4cyl S40 / V40 *• Volvo Fuel rails 5cyl 850, C / S / V70, S60, S80, V70N *• Volvo Red Engine 4cyl 8v / 16v, B23 / 230 *• Volvo Fuel rails White Engine 960 / S90 / V90 *• Volvo Red Engine 4cyl 8v / 16v, B23 / 230 Bolt-On : * Model specific volvo fuel rail, delivered without mounting brackets. The body and all components are CNC-machined from 6082 aluminum alloy. We believe this is the Best Fuel rail on the market with the highest flow capacity. The Injector safety Bracket gives a Tight and Safe operation.The Bracket is Stainless Steel for a long-lasting, corrosion-free appearance. If space is an issue we recommend you to use our Banjo-type fitting, with an oversized internal dimension for minimum cavitation. All the fittings have Viton O-rings for long-lasting operation. If you can´t find the engine you are looking for, please contact us directly, our manufacturing process makes it possible to adapt this product to most engine setups out there. Technical information :• Aluminium extrusion 6082-T6.• Delivered with 2x 3/4 UNF AN-8 fittings and 1x 1/4 G plug.• Stainless injector safety brackets for safe operation.• Anodized finish for long lasting function and corrosion free appearance.• 17,5mm internal diameter which guarantees high and reliable flow.• Laserengraved.Measurements :Height : 36 mmDepth : 33 mm..
195.60€
Ex Tax:163.00€
VEHICLE COMPATIBILITY 06-15 Audi R8 Type42 (all GEN-1 V10 trims) 08-13 Lamborghini Gallardo LP550-2 (all trims) 08-13 Lamborghini Gallardo LP560-4 (all trims) 08-13 Lamborghini Gallardo LP570-4 (all trims) NOTES: 1. Not compatible with the 1st generation Lamborghini Gallardo 5.0L engine. 2. Not compatible with the 2nd generation Audi R8 Type-4S upper or lower intake manifold. 3. Not compatible with the Lamborghini Huracan upper or lower intake manifold. The Radium Engineering Port Injection Kit (PIK) installs between the intake manifold and the lower runners on the cylinder heads. It permits the use of port injectors for the additional fuel required for highly-modified 5.2L V10 engines. This does NOT replace the OEM direct injection system. The fuel rails are CNC machined from extruded 6063 aluminum with a large 0.69in (17.5mm) bore. They are anodized for oxidation protection and laser etched for a high quality surface finish. Both end ports of each fuel rail are machined with 8AN ORB (3/4-16 female) threads. Anodized 6061 aluminum mounts secure the fuel rails with flat head stainless steel hardware. OEM quality gaskets are provided for sealing to the intake manifold. The PIK adapter plates can also be used as a simple intake manifold spacer without using the fuel rails. All that is required are 2AN ORB Plugs FUEL INJECTOR COMPATIBILITY This kit is designed for specific top feed fuel injectors with upper and lower O-ring spacing, as depicted below. The upper and lower injector O-rings must be 14mm diameter. Below are some of the many fuel injectors that are a direct fitment. Deatschwerks 16U-00-0042-4 Deatschwerks 16U-00-0050-4 Deatschwerks 16U-00-0065-4 Deatschwerks 16U-00-0090-4 Deatschwerks 16M-00-1500-4 Deatschwerks 16M-00-2200-4 INCLUDED -Anodized Aluminum PIK Adapter Plates -Anodized Aluminum Big Bore Fuel Rails -Anodized Aluminum Fuel Rail Mounts -Intake Manifold Gaskets (x10) -Stainless Steel Hardware NOTES 1. Fuel injectors, port fittings, fuel hose, wiring, injector controller, charge pipe, etc. are NOT included in 20-0865. 2. See the 20-0867-03 and 20-0867-05 (below) for plumbing that provides the necessary adapter fittings, fuel filter, regulator, pressure gauge, and hose. 3. For a high horsepower port injection check out the Radium Engineering fuel hanger surge tank. 4. Because the PIK will space up the intake manifold, a minor throttle body coupler adjustment may be required. 5. Compatible with all fuel types including popular alcohol mixtures such as E85. Instruction PDF..
1,140.49€
Ex Tax:950.41€
The Radium Engineering Port Injection Kit (PIK) installs between the intake manifold and the cylinder head. It permits the use of port injectors for the additional fuel required for highly-modified B58TU engines. This does NOT replace the OEM direct injection system. The fuel rail is CNC machined from extruded 6063 aluminum and laser etched for a high quality surface finish. Both end ports are machined with 8AN ORB (3/4-16 female) threads. For a list of all 8AN ORB adapter fittings, go HERE. The injectors are mounted at a calculated angle to ensure proper spray into the center of the intake ports without sacrificing interference from surrounding components. The PIK adapter plate can also be used as a simple intake manifold spacer without using the fuel rail. All that is required are 2AN ORB Plugs shown below. Relocation hardware is provided to allow the OEM engine vanity cover to be reused. These 4 adapters install into the underside of the vanity engine cover and make up for the intake manifold shifting. VEHICLE COMPATIBILITY 2020+ Toyota GR Supra (A90/A91) 2018+ BMW Z4 (G29) NOTES: 1. Compatible with the 2nd generation B58TU engines listed below. -B58B30O1 (B58B30B) -B58B30M1 (B58B30C) 2. NOT compatible with the 1st generation B58B30M0 (B58B30A) engine. FUEL INJECTOR COMPATIBILITY This kit is designed for specific top feed fuel injectors with upper and lower O-ring spacing, as depicted below. The upper and lower injector O-rings must be 14mm diameter. Deatschwerks 16U-00-0042-4 Deatschwerks 16U-00-0050-4 Deatschwerks 16U-00-0065-4 Deatschwerks 16U-00-0090-4 Deatschwerks 16M-00-1500-4 Deatschwerks 16M-00-2200-4 FUEL INJECTORS ARE NOT SOLD BY RADIUM ENGINEERING AND MUST BE SOURCED ELSEWHERE. PORTS AND FITTINGS The fuel rail features 2 threaded ports that are tapped for 8AN ORB. What is ORB? If building a custom fuel setup, appropriate fittings must be selected based on the specific application. Ample space around the fuel rail port(s) is necessary for larger accessories such as fuel pressure regulators, fuel pressure gauges, and fuel pulse dampers. To verify clearance, the dimensional drawings on the product pages can be used as a reference guide. INCLUDED -Anodized Aluminum PIK Adapter Plate -Anodized Aluminum Fuel Rail -Engine Cover Relocation Hardware -B58TU Intake Port Gaskets (x6) -Stainless Steel Hardware NOTES 1. Fuel injectors, port fittings, fuel hose, wiring, injector controller, charge pipe, etc. are NOT included in 20-0735. 2. See the 20-0735-PK (below) for a plumbing kit that provides the necessary adapter fittings and hose to connect to the OEM fuel line. 3. For an independently regulated high horsepower port injection fuel pump system, click HERE. 4. Because the PIK will space the intake manifold off the head, an aftermarket charge pipe will be required for the throttle body connection. 5. Compatible with all fuel types including popular alcohol mixtures such as E85. Instructions PDF..
857.56€
Ex Tax:714.63€
This kit permits an independant port injection fuel system. PTFE hoses, -AN adapter fittings, 1:1 pressure regulator, pressure gauge, and a fuel filter Microglass are all provided. These components mount to the LH side of the engine using OEM threaded bosses on the frame rail. No drilling or permanent modifications are required. The Radium Engineering fuel hanger surge tank is recommended to feed this system. INCLUDED -Fuel Filter Microglass -Fuel Pressure Regulator, 1:1 -Fuel Pressure Gauge, 0-100psi -Crimped 6AN PTFE Hoses (x4) -Black Adapter Fittings -Black Mounting Bracket -Stainless Steel Hardware Instruction PDF..
799.02€
Ex Tax:665.85€