Proporting valves
Wilwood’s new Combination Proportioning Valve substantially simplifies mounting, plumbing, wiring and brake proportioning adjustments on vehicles with custom brake systems. The combination block maintains full isolation between front and rear fluid circuits and can be used in conjunction with any tandem outlet or dual mount master cylinder assemblies. The rear circuit has a single inlet and single outlet with the adjustable proportioning valve. The front circuit has a single inlet with two outlets. It can be run as a single outlet with one outlet plugged, or used to split the plumbing on its way to the front calipers. Material - Aluminum / Steel Finish - Clear Anodize Rate - 0 to 57%..
116.10€
Ex Tax:96.75€
The new generation of adjustable proportioning valves combines the latest refinements to deliver precise pressure metering and strength from a compact forged billet design. Pressure adjustments range from 150-1200 PSI and provide for a maximum decrease of 57% in line pressure, the most of any available valve. This proportioning valve has six preset points actuated by moving a lever allowing racers to quickly adjust brake bias during a race. The lever “clicks” into the six positions for positive adjustment. Valves weigh only 6.1 ounces (lever), and have two .25” side mounting holes spaced 1.00” apart. Inlet / outlet ports are 10MM X 1 bubble flare. Material - Aluminum / Steel Finish - Clear Anodize Rate - 0 to 57%..
131.71€
Ex Tax:109.76€
Proportioning Valve - Product Summary The new generation of adjustable proportioning valves combines the latest refinements to deliver precise pressure metering and strength from a compact forged billet design. Pressure adjustments range from 150-1200 PSI and provide for a maximum decrease of 57% in line pressure, the most of any available valve. Adjuster knob with fine thread tuning provides precise pressure adjustment. Valves weigh only 5.2 ounces and have two .25” side mounting holes spaced 1.00” apart. Inlet / outlet ports are 1/8-27 NPT and valves are supplied with two 1/8-27 NPT to 3/8-24 inverted flare female fittings that will fit most domestic 3/16th hard brake lines. Master Cylinder Description Material - Aluminum / Steel Finish - Clear Anodize Reservoir Rate - 0 to 57% Additional Dimensions: Inlet Size (in) - 1/8-27 NPT Inlet Fit (in) - 3/8-24 IF Female Outlet Size 1 (in) - 1/8-27 NPT Outlet Fit 1 (in) - 3/8-24 IF Female..
57.56€
Ex Tax:47.97€
Remote Bias Adjuster - Product Description Wilwood’s Remote Balance Bar Cable Adjuster is used with balance bars to adjust front-to-rear brake bias during changing race conditions. The highly visible bright blue knob features a special bi-directional detente control providing the driver with positive adjustment feedback. The special five foot cable and housing (which can be cut to any length for a custom fit) provides an optimum bending radius for easy installation and smooth performance in tight confines. The assembly comes with two label faces for either front-to-rear or rear-to-front adjustment. Standard 3/8-24 thread fits Wilwood and most commonly used balance bars...
63.41€
Ex Tax:52.85€
Braking force regulator is device that is used in cars without an ABS system. Its main function is to guarantee an appropriate load proportion between the front and rear axles of the car during braking. The braking force regulator significantly improves braking performance and driver safety. For some cars, it is needed due to the fact that always during braking much more force is directed to the front axle. The reason for that is that in most cars greater mass is on the front part of the vehicle where the engine is located. Wilwood components are always made of the highest quality components. Available collector is made of welded aluminum and it has precision knob to adjust pressure on the rear axle. It operates in 100-1000 psi (7-70 bar) range, so even with a very large difference in braking force between the axles...
57.56€
Ex Tax:47.97€
Showing 1 to 0 of 5 (0 Pages)